Storage of hydrogen and lithium in inorganic nanotubes and nanowires

2006 ◽  
Vol 21 (11) ◽  
pp. 2744-2757 ◽  
Author(s):  
Fangyi Cheng ◽  
Jun Chen
Keyword(s):  
Energy Storage ◽  
High Efficiency ◽  
Low Cost ◽  
High Surface ◽  
Rechargeable Batteries ◽  
Energy Storage And Conversion ◽  
Electrochemical Characteristics ◽  
Environmental Benefit ◽  
Lithium Storage ◽  
Inorganic Nanotubes

The search for cleaner and more efficient energy storage and conversion technologies has become an urgent task due to increasing environmental issues and limited energy resources. The aim of energy storage and conversion is to obtain energy with environmental benefit, high efficiency, and low cost (namely, maximum atomic and recycling economy). Progress has been made in the fields of hydrogen storage and rechargeable batteries. The emerging nanotechnology offers great opportunities to improve the performance of existing energy storage systems. Applying nanoscale materials to energy storage offers a higher capacity compared to the bulk counterparts due to the unique properties of nanomaterials such as high surface areas, large surface-to-volume atom ratio, and size-confinement effect. In particular, one- dimensional (1D) inorganic nanostructures like tubes and wires exhibit superior electrochemical characteristics because of the combined advantages of small size and 1D morphology. Hydrogen and lithium can be stored in different 1D nanostructures in various ways, including physical and/or chemical sorption, intercalation, and electrochemical reactions. This review highlights some of the latest progress with the studies of hydrogen and lithium storage in inorganic nanotubes and nanowires such as MoS2, WS2, TiS2, BN, TiO2, MnO2, V2O5, Fe2O3, Co3O4, NiO, and SnO2.

Synthesis of high surface area and functionalized nanoporous biocarbons and their efficiency for CO2 capture and supercapacitors

2021 ◽  
Author(s):  
Gurwinder Singh ◽  
Rohan Bahadur ◽  
Ajanya Maria Ruban ◽  
Jefrin Marykala Davidraj ◽  
Dawei Su ◽  
...  
Keyword(s):  
Energy Storage ◽  
Surface Area ◽  
Co2 Capture ◽  
Water Purification ◽  
High Surface ◽  
High Surface Area ◽  
Energy Storage And Conversion ◽  
Waste Biomass ◽  
Fabrication Technology ◽  
Significant Attention

Nanoporous biocarbons derived from waste biomass have created significant attention owing to their great potential for energy storage and conversion and water purification. However, the fabrication technology for these materials...

scholarly journals Promoting the Performance of Li–CO2 Batteries via Constructing Three-Dimensional Interconnected K+ Doped MnO2 Nanowires Networks

2021 ◽  
Vol 9 ◽  
Author(s):  
Zhuolin Tang ◽  
Mengming Yuan ◽  
Huali Zhu ◽  
Guang Zeng ◽  
Jun Liu ◽  
...  
Keyword(s):  
Noble Metals ◽  
High Efficiency ◽  
Low Cost ◽  
Three Dimensional ◽  
High Energy ◽  
High Energy Density ◽  
Cycle Performance ◽  
Energy Storage And Conversion ◽  
Actual Application ◽  
Charge Process

Nowadays, Li–CO2 batteries have attracted enormous interests due to their high energy density for integrated energy storage and conversion devices, superiorities of capturing and converting CO2. Nevertheless, the actual application of Li–CO2 batteries is hindered attributed to excessive overpotential and poor lifespan. In the past decades, catalysts have been employed in the Li–CO2 batteries and been demonstrated to reduce the decomposition potential of the as-formed Li2CO3 during charge process with high efficiency. However, as a representative of promising catalysts, the high costs of noble metals limit the further development, which gives rise to the exploration of catalysts with high efficiency and low cost. In this work, we prepared a K+ doped MnO2 nanowires networks with three-dimensional interconnections (3D KMO NWs) catalyst through a simple hydrothermal method. The interconnected 3D nanowires network catalysts could accelerate the Li ions diffusion, CO2 transfer and the decomposition of discharge products Li2CO3. It is found that high content of K+ doping can promote the diffusion of ions, electrons and CO2 in the MnO2 air cathode, and promote the octahedral effect of MnO6, stabilize the structure of MnO2 hosts, and improve the catalytic activity of CO2. Therefore, it shows a high total discharge capacity of 9,043 mAh g−1, a low overpotential of 1.25 V, and a longer cycle performance.

Forming Gradient Multilayer (GML) Nano Films for Photovoltaic and Energy Storage Applications

2011 ◽  
Vol 1323 ◽  
Author(s):  
Boris Gilman ◽  
Igor Altman
Keyword(s):  
Energy Storage ◽  
High Efficiency ◽  
Low Cost ◽  
Deposition Process ◽  
Material Composition ◽  
Successful Implementation ◽  
Energy Storage Devices ◽  
Storage Devices ◽  
Entire Thickness ◽  
Fast Development

ABSTRACTFor successful implementation of the nanomaterial-based PV and Energy storage devices there is a need for well-structured nano films consisting of a strictly controlled sequence of nanoparticle layers. Most promising nano-films include a “built-in” gradient of a nanoparticle size and/or material composition across the part or entire thickness of the film. Such Gradient Multilayer (GML) nano films will be able to significantly improve a PV efficiency of the 3rd generation Solar Cells and Energy storage devices. The development of GML-based devices is presently limited by lack of simple, inexpensive, scalable, and production-worthy deposition methods that are capable of forming GML nano-film on PV-suitable substrates such as flexible materials.The proposed concept describes novel principles of an advanced non-conventional deposition of the highly efficient GML nano films.The proposed GML deposition method is based on the phenomena of Flying Particles (FP). According to the FP-methods a pre-selected mix of nanoparticles (NP) of various size and/or material composition is deposited on a flexible (or other) substrate in a pre-defined order of NP size and/or composition thus forming GML nano film. Deposited GML film comprises a sequence of size-tuned and/or composition-tuned NP layers, which has a potential for significant increase of PV efficiency.The deposition process includes the NPs launch and flight through a resistant gas ambient. Due to the Stokes aerodynamic laws the FP times-to-target will be different for NP of a different size and/or density (material composition). Simulation is presented to confirm the separation of FP”s of a different size and/or density during their motion through the low-pressure gas. The calculations have been made for the initial stages of the FP process thus establishing the most efficient parameters of the process. Resultant GML nano films are expected to have superior qualities, particularly for building high efficiency / low cost PV panels. The FP-method allows for a fast development and easy implementation in PV manufacturing.

scholarly journals SYNTHESIS AND APPLICATION OF CNT BASED ENERGY STORAGE AND CONVERSION DEVICES

2021 ◽  
Author(s):  
KUMAR AAYUSH ◽  
Abhishek Bhardwaj ◽  
SHIVAM SHANDILYA ◽  
SANKET BHALERAO
Keyword(s):  
Energy Storage ◽  
High Surface ◽  
High Surface Area ◽  
Energy Storage And Conversion ◽  
Tubular Structures ◽  
One Dimensional ◽  
Good Material ◽  
Energy Conversion And Storage ◽  
Conversion Materials ◽  
And Storage

Carbon nanotubes (CNTs) are one-dimensional tubular structures of carbon that have attracted much attention due to their potential to be used in various fields like energy storage/conversion devices, biosensing devices, drug delivery systems to name a few. Their excellent electrochemical properties like electron mobility, electrical and thermal conductivity, and high surface area make them good material for use in energy storage and conversion materials. The most promising research in the synthesis and applications of CNTs toward energy conversion and storage is highlighted along with limitations faced in mass production.

scholarly journals Cellulose-Derived Nanostructures as Sustainable Biomass for Supercapacitors: A Review

Polymers ◽  
2022 ◽  
Vol 14 (1) ◽  
pp. 169
Author(s):  
Seong Min Ji ◽  
Anuj Kumar
Keyword(s):  
Energy Storage ◽  
Low Cost ◽  
Sustainable Energy ◽  
High Surface ◽  
High Surface Area ◽  
Functional Materials ◽  
Energy Storage Devices ◽  
Storage Devices ◽  
Research Activities ◽  
Renewable Energy Storage

Sustainable biomass has attracted a great attention in developing green renewable energy storage devices (e.g., supercapacitors) with low-cost, flexible and lightweight characteristics. Therefore, cellulose has been considered as a suitable candidate to meet the requirements of sustainable energy storage devices due to their most abundant nature, renewability, hydrophilicity, and biodegradability. Particularly, cellulose-derived nanostructures (CNS) are more promising due to their low-density, high surface area, high aspect ratio, and excellent mechanical properties. Recently, various research activities based on CNS and/or various conductive materials have been performed for supercapacitors. In addition, CNS-derived carbon nanofibers prepared by carbonization have also drawn considerable scientific interest because of their high conductivity and rational electrochemical properties. Therefore, CNS or carbonized-CNS based functional materials provide ample opportunities in structure and design engineering approaches for sustainable energy storage devices. In this review, we first provide the introduction and then discuss the fundamentals and technologies of supercapacitors and utilized materials (including cellulose). Next, the efficacy of CNS or carbonized-CNS based materials is discussed. Further, various types of CNS are described and compared. Then, the efficacy of these CNS or carbonized-CNS based materials in developing sustainable energy storage devices is highlighted. Finally, the conclusion and future perspectives are briefly conferred.

scholarly journals SYNTHESIS AND APPLICATION OF CNT BASED ENERGY STORAGE AND CONVERSION DEVICES

2021 ◽  
Author(s):  
KUMAR AAYUSH ◽  
Abhishek Bhardwaj ◽  
SHIVAM SHANDILYA ◽  
SANKET BHALERAO
Keyword(s):  
Energy Storage ◽  
High Surface ◽  
High Surface Area ◽  
Energy Storage And Conversion ◽  
Tubular Structures ◽  
One Dimensional ◽  
Good Material ◽  
Energy Conversion And Storage ◽  
Conversion Materials ◽  
And Storage

Carbon nanotubes (CNTs) are one-dimensional tubular structures of carbon that have attracted much attention due to their potential to be used in various fields like energy storage/conversion devices, biosensing devices, drug delivery systems to name a few. Their excellent electrochemical properties like electron mobility, electrical and thermal conductivity, and high surface area make them good material for use in energy storage and conversion materials. The most promising research in the synthesis and applications of CNTs toward energy conversion and storage is highlighted along with limitations faced in mass production.

Toward dendrite-free alkaline zinc-based rechargeable batteries: A minireview

2019 ◽  
Vol 12 (05) ◽  
pp. 1930004 ◽  
Author(s):  
Xin Cao ◽  
Huan Xia ◽  
Xiangyu Zhao
Keyword(s):  
Energy Storage ◽  
Energy Density ◽  
Dendritic Growth ◽  
Low Cost ◽  
Electrical Energy ◽  
High Energy ◽  
Rechargeable Batteries ◽  
High Energy Density ◽  
Electrode Design ◽  
Electrical Energy Storage

Alkaline zinc-based rechargeable batteries (AZRBs) are competitive candidates for future electrical energy storage because of their low-cost, eco-friendliness and high energy density. However, plagued by dendrites, the AZRBs suffer from drastic decay in electrochemical properties and safety. This review elucidates fundamentals of zinc dendritic formation and summarizes the strategies, including electrode design and modification, electrolyte optimization and separator improvement, for suppressing zinc dendritic growth.

Bifunctional oxygen electrocatalysis on ultra-thin Co9S8/MnS carbon nanosheets for all-solid-state zinc-air batteries

2021 ◽  
Author(s):  
Jiacheng Li ◽  
Wanqing Li ◽  
Hongwei Mi ◽  
Yongliang Li ◽  
Libo Deng ◽  
...  
Keyword(s):  
Energy Storage ◽  
Solid State ◽  
Oxygen Reduction Reaction ◽  
Oxygen Evolution ◽  
Oxygen Evolution Reaction ◽  
High Efficiency ◽  
Reduction Reaction ◽  
Energy Storage And Conversion ◽  
Carbon Nanosheets ◽  
Zinc Air Batteries

The development of high-efficiency and durable bifunctional oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) electrocatalysts as air cathodes is still a challenge in energy storage and conversion. In...

scholarly journals Performance Index: A Simple Selection Method of Appropriate Energy Storage for Specific Application

2018 ◽  
Vol 171 ◽  
pp. 01002
Author(s):  
Hussein Ibrahim ◽  
Mazen Ghandour ◽  
Sabine Saad
Keyword(s):  
Energy Storage ◽  
Power Systems ◽  
Performance Index ◽  
High Efficiency ◽  
Low Cost ◽  
Storage Devices ◽  
Renewable Power ◽  
Storage Methods ◽  
Simple Selection ◽  
Term Storage

The efficiency and cost of renewable power systems using intermittent resources could significantly be improved by developing low cost, high efficiency and more sustainable energy storage systems. There are various types of storage methods, some of which are already in use, while others are still in development. A comparison study between energy storage options is presented in this paper. We have taken a look at the main characteristics of the different electricity storage techniques and their field of application (permanent or portable, long-or short-term storage, maximum power required, etc.). These characteristics will serve to make comparisons in order to determine the most appropriate technique for each type of application. Based the results obtained in this study, a “performance index” have been determined for each storage technology in order to facilitate the comparison between the different storage devices.

Sign in / Sign up

Export Citation Format

Share Document