Heteroepitaxial growth of 3C–SiC film on Si(100) substrate by plasma chemical vapor deposition using monomethylsilane

2007 ◽  
Vol 22 (5) ◽  
pp. 1275-1280 ◽  
Author(s):  
Y. Morikawa ◽  
M. Hirai ◽  
A. Ohi ◽  
M. Kusaka ◽  
M. Iwami

We have studied the heteroepitaxial growth of 3C–SiC film on an Si(100) substrate by plasma chemical vapor deposition using monomethylsilane, a single-molecule gas containing both Si and C atoms. We have tried to introduce an interval process, in which we decrease the substrate temperature for a few minutes at a suitable stage of film growth. It was expected that, during the interval process, stabilization such as desorption of nonreacted precursors and lateral diffusion of species produced at the initial stage of film growth would occur. From the results, it appears that the interval process using a substrate temperature of 800 °C effectively suppresses polycrystallization of 3C–SiC growth on the Si(100) surface

2002 ◽  
Vol 742 ◽  
Author(s):  
Mitsuo Okamoto ◽  
Ryoji Kosugi ◽  
Shinichi Nakashima ◽  
Kenji Fukuda ◽  
Kazuo Arai

ABSTRACTHomoepitaxial 4H-SiC film growth has been carried out at temperatures as low as 1000°C on 4H-SiC of Si-face and C-face by microwave plasma chemical vapor deposition method. The extent of step-bunching of those films grown on C-face was low in comparison with that on Si-face, although large and irregular shaped step-bunching was occurred in both films grown on Si-face and C-face. For the first step to application for the electrical devices, the electrical properties of the μPCVD grown films was characterized by fabricating simple pn-junction structure. The obtained SiC films indicated n-type conductivity and the amount of background donor impurities of the films grown on C-face substrates were lower by one order than that on Si-face.


1998 ◽  
Vol 13 (11) ◽  
pp. 3114-3121 ◽  
Author(s):  
Gou-Tsau Liang ◽  
Franklin Chau-Nan Hong

Hollow cathode arc plasma chemical vapor deposition was employed to grow crystalline diamond films using 1.5% to 7% of methane in hydrogen. The growth rate was as high as 3.2 μ/h when using 5% CH4/H2 at a pressure of 15 Torr and a substrate temperature of 1083 K. However, an intermediate layer of several hundred nanometers was observed at the film-substrate interface by cross-section SEM. Raman and XPS characterizations showed that the interfacial layer consisted of sp2 carbon and TaC with Ta vaporized from the hot cathode tube. XRD and XPS results further showed that the deposited diamond films also contained TaC. Ta composition in the film increased with the increase of growth pressure, the reduction of substrate temperature, and the increase of H2 flow in the Ta tube. The diamond films deposited by using CHCl3 as carbon source had Ta concentrations one order of magnitude higher than those using CH4, as shown by XPS results, but the nucleation densities using CHCl3 were always higher than those using CH4.


Sign in / Sign up

Export Citation Format

Share Document