A Novel Technology for Green(er) Manufacturing of CNTs via Recycling of Waste Plastics

2011 ◽  
Vol 1317 ◽  
Author(s):  
Chuanwei Zhuo ◽  
Brendan Hall ◽  
Yiannis Levendis ◽  
Henning Richter

ABSTRACTCostly and often highly-flammable chemicals, such as hydrogen and carbon-containing gases, are largely used for carbon supply in current carbon nanotube (CNT) synthesis technologies. To mitigate related economic and safety concerns, we have developed a versatile CNT synthesis sequence, where low-cost and safe-to-handle-and-store waste solid polymers (plastics) are used for in situ generation of hydrogen and carbon-containing gases. Introduction of different waste plastics, such as polyethylene, polypropylene and polystyrene, into a multi-stage pyrolysis/ combustion/synthesis reactor allows for efficient CNT formation. This process is largely exothermic and scalable. It uses low-cost stainless steel screens to serve both as substrates as well as catalysts for CNT synthesis. This technique enables a solution for both waste plastic utilization and sustainable CNT production.

Lubricants ◽  
2020 ◽  
Vol 8 (8) ◽  
pp. 78
Author(s):  
Soumya Sikdar ◽  
Arpith Siddaiah ◽  
Pradeep L. Menezes

Plastics are widely used owing to their light weight, easy production, and low cost. Even though plastics find application in different fields of industries and households, they do not degrade easily. If plastics are not disposed of appropriately, it has been shown that they cause widespread environmental pollution, which poses risks to human health. Recycling waste plastics has been an alternative to mitigating plastic pollution, which usually requires high labour costs and produces contaminated water during processing. If plastic recycling will contribute to the development of tribological products like lubricating oils, it is a safer alternative to disposing of plastics in the environment. In order to understand the tribological use of plastics by recycling, the present study reviews different techniques that can be employed to transform waste plastics into petroleum-based oils. The viscosity, density, and friction of pyrolyzed waste plastic oils are investigated and compared with commercial lubricants to assess their potential lubrication applications. The segregation processes, catalytic isomerization dewaxing, and Fischer–Tropsch method to recycle waste plastics are also reviewed to provide an insight into the methods to transform pyrolyzed waste plastic into lubricants.


2012 ◽  
Vol 53 (6) ◽  
pp. 1069-1074 ◽  
Author(s):  
Mitsuharu Shiwa ◽  
Hiroyuki Masuda ◽  
Hisashi Yamawaki ◽  
Kaita Ito ◽  
Manabu Enoki

Alloy Digest ◽  
2001 ◽  
Vol 50 (1) ◽  

Abstract UNS S41003 is a low-cost utilitarian martensitic stainless steel to be used for highway and other applications. It is used in the tempered condition at several strength levels. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear and bend strength It also includes information on forming, heat treating, and joining. Filing Code: SS-815. Producer or source: Bethlehem Lukens Plate.


Alloy Digest ◽  
2020 ◽  
Vol 69 (12) ◽  

Abstract Outokumpu Moda 410L/4003 is a weldable, extra low carbon, Cr-Ni, ferritic stainless steel that is best suited for mildly corrosive environments such as indoors, where the material is either not exposed to contact with water or gets regularly wiped dry, or outdoors, where some discoloration and superficial rusting are acceptable. It is a low-cost alternative to low-carbon non-alloy steels in certain applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1330. Producer or source: Outokumpu Oyj.


Alloy Digest ◽  
1997 ◽  
Vol 46 (5) ◽  

Abstract Duracorr is low-cost, utilitarian 11% Cr stainless steel with more corrosion resistance and life-cycle cost advantages than weathering steels. The steel may be used where a combination of abrasion and corrosion resistance is required. This datasheet provides information on composition, physical properties, microstructure, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on corrosion resistance as well as joining. Filing Code: SS-680. Producer or source: Lukens Steel Company.


Author(s):  
Jian-Shing Luo ◽  
Hsiu Ting Lee

Abstract Several methods are used to invert samples 180 deg in a dual beam focused ion beam (FIB) system for backside milling by a specific in-situ lift out system or stages. However, most of those methods occupied too much time on FIB systems or requires a specific in-situ lift out system. This paper provides a novel transmission electron microscopy (TEM) sample preparation method to eliminate the curtain effect completely by a combination of backside milling and sample dicing with low cost and less FIB time. The procedures of the TEM pre-thinned sample preparation method using a combination of sample dicing and backside milling are described step by step. From the analysis results, the method has applied successfully to eliminate the curtain effect of dual beam FIB TEM samples for both random and site specific addresses.


2019 ◽  
Author(s):  
Nikki Theofanopoulou ◽  
Katherine Isbister ◽  
Julian Edbrooke-Childs ◽  
Petr Slovák

BACKGROUND A common challenge within psychiatry and prevention science more broadly is the lack of effective, engaging, and scale-able mechanisms to deliver psycho-social interventions for children, especially beyond in-person therapeutic or school-based contexts. Although digital technology has the potential to address these issues, existing research on technology-enabled interventions for families remains limited. OBJECTIVE The aim of this pilot study was to examine the feasibility of in-situ deployments of a low-cost, bespoke prototype, which has been designed to support children’s in-the-moment emotion regulation efforts. This prototype instantiates a novel intervention model that aims to address the existing limitations by delivering the intervention through an interactive object (a ‘smart toy’) sent home with the child, without any prior training necessary for either the child or their carer. This pilot study examined (i) engagement and acceptability of the device in the homes during 1 week deployments; and (ii) qualitative indicators of emotion regulation effects, as reported by parents and children. METHODS In this qualitative study, ten families (altogether 11 children aged 6-10 years) were recruited from three under-privileged communities in the UK. The RA visited participants in their homes to give children the ‘smart toy’ and conduct a semi-structured interview with at least one parent from each family. Children were given the prototype, a discovery book, and a simple digital camera to keep at home for 7-8 days, after which we interviewed each child and their parent about their experience. Thematic analysis guided the identification and organisation of common themes and patterns across the dataset. In addition, the prototypes automatically logged every interaction with the toy throughout the week-long deployments. RESULTS Across all 10 families, parents and children reported that the ‘smart toy’ was incorporated into children’s emotion regulation practices and engaged with naturally in moments children wanted to relax or calm down. Data suggests that children interacted with the toy throughout the duration of the deployment, found the experience enjoyable, and all requested to keep the toy longer. Child emotional connection to the toy—caring for its ‘well-being’—appears to have driven this strong engagement. Parents reported satisfaction with and acceptability of the toy. CONCLUSIONS This is the first known study investigation of the use of object-enabled intervention delivery to support emotion regulation in-situ. The strong engagement and qualitative indications of effects are promising – children were able to use the prototype without any training and incorporated it into their emotion regulation practices during daily challenges. Future work is needed to extend this indicative data with efficacy studies examining the psychological efficacy of the proposed intervention. More broadly, our findings suggest the potential of a technology-enabled shift in how prevention interventions are designed and delivered: empowering children and parents through ‘child-led, situated interventions’, where participants learn through actionable support directly within family life, as opposed to didactic in-person workshops and a subsequent skills application.


Author(s):  
Ogün Baris Tapar ◽  
Jérémy Epp ◽  
Matthias Steinbacher ◽  
Jens Gibmeier

AbstractAn experimental heat treatment chamber and control system were developed to perform in-situ X-ray diffraction experiments during low-pressure carburizing (LPC) processes. Results from the experimental chamber and industrial furnace were compared, and it was proven that the built system is reliable for LPC experiments. In-situ X-ray diffraction investigations during LPC treatment were conducted at the German Electron Synchrotron Facility in Hamburg Germany. During the boost steps, carbon accumulation and carbide formation was observed at the surface. These accumulation and carbide formation decelerated the further carbon diffusion from atmosphere to the sample. In the early minutes of the diffusion steps, it is observed that cementite content continue to increase although there is no presence of gas. This effect is attributed to the high carbon accumulation at the surface during boost steps which acts as a carbon supply. During quenching, martensite at higher temperature had a lower c/a ratio than later formed ones. This difference is credited to the early transformation of austenite regions having lower carbon content. Also, it was noticed that the final carbon content dissolved in martensite reduced compared to carbon in austenite before quenching. This reduction was attributed to the auto-tempering effect.


Author(s):  
Xiao Tan ◽  
Xin Liu ◽  
Yingying Si ◽  
Zunhang Lv ◽  
Zihan Li ◽  
...  

It is very important to design and prepare low-cost and efficiency electrocatalysts for water splitting in alkaline solution. In this works, Ni-Fe-P and Ni-Fe-P-FeMnO3 electrocatalysts are developed using facile electrodeposition...


Sign in / Sign up

Export Citation Format

Share Document