Development of lead-free materials for piezoelectric energy harvesting

2011 ◽  
Vol 1325 ◽  
Author(s):  
R. Rai ◽  
I. Coondoo ◽  
R. P. Lopes ◽  
I. Bdikin ◽  
R. Ayouchi ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Piezoelectric Materials ◽  
Mechanical Energy ◽  
Piezoresponse Force Microscopy ◽  
Solid State Reaction Method ◽  
Lead Free ◽  
Piezoelectric Energy Harvesting ◽  
Force Microscopy ◽  
Environment And Health ◽  
Piezoelectric Energy

ABSTRACTMechanical energy harvesting from ambient vibrations is an attractive renewable source of energy for various applications. Prior research was solely based on lead-containing materials which are detrimental to the environment and health. Therefore, lead-free materials are becoming more attractive for harvesting applications. The present work is focused on the development of lead-free piezoelectric materials based on solid solution having composition (KNa)NbO3-xABO3, (where A = Li, and B = Nb; x = 0, 5, 5.5, 6, and 6.5 wt%). The solid solutions of the above ceramics were prepared by using solid-state reaction method. The X-ray diffraction spectra exhibited single phase formation and good crystallinity with LiNbO3 addition up to x = 6.5 wt%. Dielectric studies reveal that the composition with LiNbO3 = 6.5 wt% exhibits superior properties suitable for piezoelectric energy harvesting applications. The nanoscale piezoelectric data obtained with piezoresponse force microscopy provide a direct evidence of strong piezoelectricity with LN doping. The best piezoelectric properties are obtained for the composition K0.5Na0.5NbO3 – 6.5%LiNbO3.

Mechanistic Modeling and Economic Analysis of Piezoelectric Energy Harvesting Potential in Airport Pavements

2020 ◽  
Vol 2674 (11) ◽  
pp. 64-75
Author(s):  
Jingnan Zhao ◽  
Hao Wang
Keyword(s):  
Energy Harvesting ◽  
Economic Analysis ◽  
Power Output ◽  
Piezoelectric Materials ◽  
Mechanical Energy ◽  
Mechanistic Modeling ◽  
Piezoelectric Energy Harvesting ◽  
Levelized Cost Of Electricity ◽  
Near Surface ◽  
Piezoelectric Energy

This study investigated the feasibility of applying piezoelectric energy harvesting technology in airfield pavements through mechanistic modeling and economic analysis. The energy harvesting performance of piezoelectric transducers was evaluated based on mechanical energy induced by multi-wheel aircraft loading on flexible airfield pavements. A three-dimensional finite element model was used to estimate the stress pulse and magnitude under moving aircraft tire loading. A stack piezoelectric transducer design was used to estimate the power output of a piezoelectric harvester embedded at different locations and depths in the pavement. The aircraft load and speed were found to be vital factors affecting the power output, along with the installation depth and horizontal locations of the energy harvester. On the other hand, the installation of the energy module had a negligible influence on the horizontal tensile strains at the bottom of the asphalt layer and compressive strains on the top of the subgrade. However, the near-surface pavement strains increased when the edge ribs of the tire were loaded on the energy module. Feasibility analysis results showed that the calculated levelized cost of electricity was high in general, although it varies depending on the airport traffic levels and the service life of the energy module. With the development of piezoelectric materials and technology, further evaluation of energy harvesting applications at airports needs to be conducted.

scholarly journals Lead-Free Bi3.15Nd0.85Ti3O12 Nanoplates Filler-Elastomeric Polymer Composite Films for Flexible Piezoelectric Energy Harvesting

Micromachines ◽  
2020 ◽  
Vol 11 (11) ◽  
pp. 966
Author(s):  
Wancheng Qin ◽  
Peng Zhou ◽  
Yajun Qi ◽  
Tianjin Zhang
Keyword(s):  
Energy Harvesting ◽  
Mechanical Energy ◽  
Short Circuit ◽  
Composite Films ◽  
Short Circuit Current ◽  
Lead Free ◽  
Piezoelectric Energy Harvesting ◽  
Wearable Electronics ◽  
Light Emitting ◽  
Piezoelectric Energy

Nowadays, wearable and flexible nanogenerators are of great importance for portable personal electronics. A flexible piezoelectric energy harvester (f-PEH) based on Bi3.15Nd0.85Ti3O12 single crystalline nanoplates (BNdT NPs) and polydimethylsiloxane (PDMS) elastomeric polymer was fabricated, and high piezoelectric energy harvesting performance was achieved. The piezoelectric output performance is highly dependent on the mass ratio of the BNdT NPs in the PDMS matrix. The as-prepared f-PEH with 12.5 wt% BNdT NPs presents the highest output voltage of 10 V, a peak-peak short-circuit current of 1 μA, and a power of 1.92 μW under tapping mode of 6.5 N at 2.7 Hz, which can light up four commercial light emitting diodes without the energy storage process. The f-PEHs can be used to harvest daily life energy and generate a voltage of 2–6 V in harvesting the mechanical energy of mouse clicking or foot stepping. These results demonstrate the potential application of the lead-free BNdT NPs based f-PEHs in powering wearable electronics

scholarly journals Modeling of Piezoelectric Energy Harvesting from Freely Oscillating Cylinders in Water Flow

2014 ◽  
Vol 2014 ◽  
pp. 1-13 ◽  
Author(s):  
Min Zhang ◽  
YingZheng Liu ◽  
ZhaoMin Cao
Keyword(s):  
Energy Harvesting ◽  
Free Stream ◽  
Piezoelectric Materials ◽  
Load Resistance ◽  
Stream Velocity ◽  
Piezoelectric Energy Harvesting ◽  
Vibratory System ◽  
System Parameters ◽  
Piezoelectric Energy ◽  
Vortex Induced Vibrations

A concept of energy harvesting from vortex-induced vibrations of a rigid circular cylinder with two piezoelectric beams attached is investigated. The variations of the power levels with the free stream velocity are determined. A mathematical approach including the coupled cylinder motion and harvested voltage is presented. The effects of the load resistance, piezoelectric materials, and circuit combined on the natural frequency and damping of the vibratory system are determined by performing a linear analysis. The dynamic response of the cylinder and harvested energy are investigated. The results show that the harvested level in SS and SP&PS modes is the same with different values of load resistance. For four different system parameters, the results show that the bigger size of cylinder with PZT beams can obtain the higher harvested power.

Energy harvesting from quasi-static deformations via bilaterally constrained strips

2018 ◽  
Vol 29 (18) ◽  
pp. 3572-3581
Author(s):  
Suihan Liu ◽  
Ali Imani Azad ◽  
Rigoberto Burgueño
Keyword(s):  
Energy Harvesting ◽  
Low Power ◽  
Mechanical Energy ◽  
Electrical Power ◽  
Energy Resource ◽  
Electrical Energy ◽  
Piezoelectric Energy Harvesting ◽  
Power Budget ◽  
Piezoelectric Energy ◽  
Static Conditions

Piezoelectric energy harvesting from ambient vibrations is well studied, but harvesting from quasi-static responses is not yet fully explored. The lack of attention is because quasi-static actions are much slower than the resonance frequency of piezoelectric oscillators to achieve optimal outputs; however, they can be a common mechanical energy resource: from large civil structure deformations to biomechanical motions. The recent advances in bio-micro-electro-mechanical systems and wireless sensor technologies are motivating the study of piezoelectric energy harvesting from quasi-static conditions for low-power budget devices. This article presents a new approach of using quasi-static deformations to generate electrical power through an axially compressed bilaterally constrained strip with an attached piezoelectric layer. A theoretical model was developed to predict the strain distribution of the strip’s buckled configuration for calculating the electrical energy generation. Results from an experimental investigation and finite element simulations are in good agreement with the theoretical study. Test results from a prototyped device showed that a peak output power of 1.33 μW/cm2 was generated, which can adequately provide power supply for low-power budget devices. And a parametric study was also conducted to provide design guidance on selecting the dimensions of a device based on the external embedding structure.

Piezoelectric Energy Harvesting for Powering Micro Electromechanical Systems (MEMS)

2015 ◽  
Vol 8 (1) ◽  
Author(s):  
A. Majeed
Keyword(s):  
Energy Harvesting ◽  
Low Power ◽  
Piezoelectric Materials ◽  
Electrical Energy ◽  
Piezoelectric Energy Harvesting ◽  
Wireless Technology ◽  
Power Devices ◽  
Piezoelectric Energy ◽  
Technical Innovations ◽  
Low Power Electronics

Recent advancements in wireless technology and low power electronics such as micro electrome-chanical systems (MEMS), have created a surge of technical innovations in the eld of energy har-vesting. Piezoelectric materials, which operate on vibrations surrounding the system have becomehighly useful in terms of energy harvesting. Piezoelectricity is the ability to transform mechanicalstrain energy, mostly vibrations, to electrical energy, which can be used to power devices. This paperwill focus on energy harvesting by piezoelectricity and how it can be incorporated into various lowpower devices and explain the ability of piezoelectric materials to function as self-charging devicesthat can continuously supply power to a device and will not require any battery for future processes.

Piezoelectric Energy Harvesting From Roadways Based on Pavement Compatible Package

2019 ◽  
Vol 86 (9) ◽  
Author(s):  
He Zhang ◽  
Kangxu Huang ◽  
Zhicheng Zhang ◽  
Tao Xiang ◽  
Liwei Quan
Keyword(s):  
Energy Harvesting ◽  
Output Power ◽  
Mechanical Energy ◽  
Scaling Law ◽  
Piezoelectric Energy Harvesting ◽  
Resistive Load ◽  
Piezoelectric Energy ◽  
Simple Scaling ◽  
Energy Harvesting System ◽  
Combined Parameters

Scavenging mechanical energy from the deformation of roadways using piezoelectric energy transformers has been intensively explored and exhibits a promising potential for engineering applications. We propose here a new packaging method that exploits MC nylon and epoxy resin as the main protective materials for the piezoelectric energy harvesting (PEH) device. Wheel tracking tests are performed, and an electromechanical model is developed to double evaluate the efficiency of the PEH device. Results indicate that reducing the embedded depth of the piezoelectric chips may enhance the output power of the PEH device. A simple scaling law is established to show that the normalized output power of the energy harvesting system relies on two combined parameters, i.e., the normalized electrical resistive load and normalized embedded depth. It suggests that the output power of the system may be maximized by properly selecting the geometrical, material, and circuit parameters in a combined manner. This strategy might also provide a useful guideline for optimization of piezoelectric energy harvesting system in practical roadway applications.

scholarly journals A Review on Piezoelectric Energy Harvesting: Materials, Methods, and Circuits

2019 ◽  
Vol 4 (1) ◽  
pp. 3-39 ◽  
Author(s):  
Shashank Priya ◽  
Hyun-Cheol Song ◽  
Yuan Zhou ◽  
Ronnie Varghese ◽  
Anuj Chopra ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Power Management ◽  
Energy Harvester ◽  
Piezoelectric Materials ◽  
Low Frequency ◽  
Small Scale ◽  
Piezoelectric Energy Harvesting ◽  
Wide Bandwidth ◽  
Piezoelectric Energy ◽  
Continuous Power

Abstract Piezoelectric microelectromechanical systems (PiezoMEMS) are attractive for developing next generation self-powered microsystems. PiezoMEMS promises to eliminate the costly assembly for microsensors/microsystems and provide various mechanisms for recharging the batteries, thereby, moving us closer towards batteryless wireless sensors systems and networks. In order to achieve practical implementation of this technology, a fully assembled energy harvester on the order of a quarter size dollar coin (diameter=24.26 mm, thickness=1.75 mm) should be able to generate about 100 μW continuous power from low frequency ambient vibrations (below 100 Hz). This paper reviews the state-of-the-art in microscale piezoelectric energy harvesting, summarizing key metrics such as power density and bandwidth of reported structures at low frequency input. This paper also describes the recent advancements in piezoelectric materials and resonator structures. Epitaxial growth and grain texturing of piezoelectric materials is being developed to achieve much higher energy conversion efficiency. For embedded medical systems, lead-free piezoelectric thin films are being developed and MEMS processes for these new classes of materials are being investigated. Non-linear resonating beams for wide bandwidth resonance are also reviewed as they would enable wide bandwidth and low frequency operation of energy harvesters. Particle/granule spray deposition techniques such as aerosol-deposition (AD) and granule spray in vacuum (GSV) are being matured to realize the meso-scale structures in a rapid manner. Another important element of an energy harvester is a power management circuit, which should maximize the net energy harvested. Towards this objective, it is essential for the power management circuit of a small-scale energy harvester to dissipate minimal power, and thus it requires special circuit design techniques and a simple maximum power point tracking scheme. Overall, the progress made by the research and industrial community has brought the energy harvesting technology closer to the practical applications in near future.

Fractional Order Model of Broadband Piezoelectric Energy Harvesters

2015 ◽  
Author(s):  
Dan Li ◽  
Junyi Cao ◽  
Shengxi Zhou ◽  
Yangquan Chen
Keyword(s):  
Energy Harvesting ◽  
Fractional Order ◽  
Piezoelectric Materials ◽  
Ambient Vibration ◽  
Piezoelectric Energy Harvesting ◽  
Order Model ◽  
Piezoelectric Energy ◽  
Fractional Order Model ◽  
Electromechanical Interaction ◽  
Environmental Vibration

This paper presents a factional model for broadband piezoelectric energy harvesting systems. Piezoelectric materials pay a significant role in harvesting ambient vibration energy. Due to their inherent characteristics and electromechanical interaction effect, piezoelectric energy harvesting exhibits the hysteresis characteristic under sweeping environmental vibration. Fractional order model of piezoelectric energy harvesting could capture the hysteresis characteristics. Simulation and experimental results show that fractional model of piezoelectric energy harvesting is more effective in describing the system dynamic.

Performance of lead-free piezoelectric materials in cantilever-based energy harvesting devices

2014 ◽  
Vol 03 (02) ◽  
pp. 1450010 ◽  
Author(s):  
Anuruddh Kumar ◽  
Rajeev Kumar ◽  
Vishal S. Chauhan ◽  
Rahul Vaish
Keyword(s):  
Energy Harvesting ◽  
Power Density ◽  
Lead Zirconate Titanate ◽  
Piezoelectric Materials ◽  
Lead Zirconate ◽  
Lead Free ◽  
Frequency Range ◽  
Mean Power ◽  
Piezoelectric Energy ◽  
Energy Harvesting Devices

Energy harvesting is one of the emerging applications of piezoelectric materials. In order to replace conventional lead-based materials with lead-free materials, it is important to evaluate their performance for such applications. In the present study, finite element method-based simulation shows mean power density produced from ( K 0.475 Na 0.475 Li 0.05)( Nb 0.92 Ta 0.05 Sb 0.03) O 3 add with 0.4 wt.% CeO 2 and 0.4 wt.% MnO 2 (KNLNTS) bimorph is 96.64% of lead zirconate titanate ( Pb [ Zr x Ti 1-x] O 3) (PZT) ceramics. Load resistance (R), length of proof mass (Lm) and thickness of host layer (th) are optimized (using genetic algorithm) for maximum power density and tuning the operating frequency range which is near to natural frequency of the structure. The lead-free piezoelectric material KNLNTS has comparable results to that of PZT for piezoelectric energy harvester in the ambient frequency range of 90 Hz to 110 Hz. Results show that KNLNTS ceramics can be potentially used in energy harvesting devices.

Sign in / Sign up

Export Citation Format

Share Document