Hybrid SWCNT - NiO Composites for Supercapacitor Applications

2013 ◽  
Vol 1552 ◽  
Author(s):  
Jeffrey R. Alston ◽  
Dylan Brokaw ◽  
Colton Overson ◽  
Thomas A. Schmedake ◽  
Jordan C. Poler

ABSTRACTSupercapacitor devices promise to be an effective means of storing energy, and delivering power for personal electronics, remote sensors, and transportation.1, 2 Rare earth metals, such as ruthenium, have been used and report high value of capacitance, specific power, and energy.4 Nevertheless, the rarity of such metals prevent their practical use. In this study we utilize an earth-abundant nickel and a controlled microwave synthesis to create nickel oxide (NiO) with an optimal nanostructure for capacitance. To surpass the lofty series resistance associated with metal oxides such as NiO, we exploit the conductive properties of single and multi-walled carbon nanotubes. The carbon nanotubes and NiO can benefit from the presence of each other by preventing unnecessary aggregation.

2012 ◽  
Vol 217-219 ◽  
pp. 567-570
Author(s):  
Dan Wang ◽  
Ke Qing Han ◽  
Wen Hui Zhang ◽  
Bin Yan ◽  
Yin Cai Tian ◽  
...  

Polyacrylonitrile(PAN)/multi-walled carbon nanotubes (MWNTs) composite fibers were prepared by melt spinning using ionic liquids (ILs) as a plasticizer. The effects of different MWNTs contents on the morphology, mechanical and conductive properties of the composite fibers were discussed. The results showed that property improvements have occurred with the adding of MWNTs. When the content of MWNTs reached 10%, the conductivity of PAN/MWNTs was 8.65×10-3 S/cm.


Nanomaterials ◽  
2018 ◽  
Vol 8 (3) ◽  
pp. 176 ◽  
Author(s):  
Maurizio Sansotera ◽  
Sadaf Talaeemashhadi ◽  
Cristian Gambarotti ◽  
Carlo Pirola ◽  
Mariangela Longhi ◽  
...  

Nanomaterials ◽  
2022 ◽  
Vol 12 (2) ◽  
pp. 266
Author(s):  
Zhong Zheng ◽  
Anxin Yang ◽  
Jiafeng Tao ◽  
Jing Li ◽  
Wenqian Zhang ◽  
...  

Because of the dilemma that the current industrial Cu enhancement methods lead to a significant decline in conductivity and ductility, Cu matrix composites reinforced by oriented multi-walled carbon nanotubes (MWCNTs) were prepared through sintering, hot extrusion, and cold drawing. Before sintering, Ni, Cu, and Ni&Cu coatings were electroless plated on MWCNTs as the intermediate transition layer, and then they were mixed with Cu powder through a nitrogen bubbling assisted ultrasonic process. By analyzing the composition, microstructure, and formation mechanism of the interface between MWCNTs and the matrix, the influence and mechanism of the interface on the mechanical properties, conductivity, and ductility of the composites were explored. The results indicated that MWCNTs maintained a highly dispersed and highly consistent orientation in the Cu matrix. The coating on Ni@CNT was the densest, continuous, and complete. The Ni@CNTs/Cu composite had the greatest effect, while the Cu composite reinforced by MWCNT without coating had the smallest reduction in elongation and conductivity. The comprehensive performance of the Cu@CNTs/Cu composite was the most balanced, with an ultimate tensile strength that reached 373 MPa, while the ductility and conductivity were not excessively reduced. The axial electrical and thermal conductivity were 79.9 IACS % (International Annealed Copper Standard) and 376 W/mK, respectively.


Acta Naturae ◽  
2011 ◽  
Vol 3 (1) ◽  
pp. 99-106 ◽  
Author(s):  
E A Smirnova ◽  
A A Gusev ◽  
O N Zaitseva ◽  
E M Lazareva ◽  
G E Onishchenko ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document