Fluorescent Rosette Nanotubes from the C-analogue of the Guanine–Cytosine (G∧C) Motif

2015 ◽  
Vol 1796 ◽  
pp. 1-6 ◽  
Author(s):  
Belete Legesse ◽  
Jae-Young Cho ◽  
Rachel L. Beingessner ◽  
Takeshi Yamazaki ◽  
Hicham Fenniri
Keyword(s):  
Electron Microscopy ◽  
Self Assembly ◽  
The Self ◽  
Visible Spectroscopy ◽  
Fluorescent Properties ◽  
Force Microscopy ◽  
Rosette Nanotubes ◽  
Atomic Force ◽  
Transmission Electron ◽  
Uv Visible

ABSTRACTRosette nanotubes (RNTs) are tubular architectures generated through the hierarchical self-assembly of the guanine-cytosine (G∧C) motif 1 or 2 (Figure 1). Motif 2 differs from 1 by the substitution at the N-atom in the G-ring with a C-atom as shown in red. In this paper, we prepare a new tricyclic G∧C base 3 from a functionalized derivative of 2 and demonstrate its self-assembly into fluorescent helical RNTs in N,N-dimethylformamide (DMF). The self-assembly and fluorescent properties of RNTs 3 were established using scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM) and UV-visible spectroscopy.

Combinatorial Approach to Materials Fabrication from Higher Hierarchies of Rosette Nanotubes

2007 ◽  
Vol 1057 ◽  
Author(s):  
Grigory Tikhomirov ◽  
Hicham Fenniri
Keyword(s):  
Electron Microscopy ◽  
Self Assembly ◽  
The Self ◽  
Combinatorial Approach ◽  
X Ray ◽  
Force Microscopy ◽  
Rosette Nanotubes ◽  
Self Assembling ◽  
Atomic Force ◽  
Transmission Electron

ABSTRACTThe self-assembly of six self-complimentary Guanine – Cytosine hybrid heterocycles bearing hydrophobic substituents has been studied using combinatorial approach in eight solvents under different conditions. The parameters that were varied include: the structure of the self-assembling module, its concentration, the solvent, temperature, and time of self-assembly. scanning electron microscopy (SEM) was used as a screening tool. A wide variety of interesting morphologies was found. The most interesting structures were studied by atomic force microscopy (AFM), transmission electron microscopy (TEM), dynamic light scattering (DLS), and X-ray powder diffraction (XRD).

scholarly journals Nanohydrogels Based on Self-Assembly of Cationic Pullulan and Anionic Dextran Derivatives for Efficient Delivery of Piroxicam

Pharmaceutics ◽  
2019 ◽  
Vol 11 (12) ◽  
pp. 622 ◽  
Author(s):  
Dorota Lachowicz ◽  
Przemyslaw Mielczarek ◽  
Roma Wirecka ◽  
Katarzyna Berent ◽  
Anna Karewicz ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Self Assembly ◽  
Electrostatic Interactions ◽  
Dextran Sulfate ◽  
Force Microscopy ◽  
Grafting Reaction ◽  
Atomic Force ◽  
Transmission Electron ◽  
Efficient Delivery ◽  
Model Drug

A cationic derivative of pullulan was obtained by grafting reaction and used together with dextran sulfate to form polysaccharide-based nanohydrogel cross-linked via electrostatic interactions between polyions. Due to the polycation-polyanion interactions nanohydrogel particles were formed instantly and spontaneously in water. The nanoparticles were colloidally stable and their size and surface charge could be controlled by the polycation/polyanion ratio. The morphology of the obtained particles was visualized by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and atomic force microscopy (AFM). The resulting structures were spherical, with hydrodynamic diameters in the range of 100–150 nm. The binding constant (Ka) of a model drug, piroxicam, to the cationic pullulan (C-PUL) was determined by spectrophotometric measurements. The value of Ka was calculated according to the Benesi—Hildebrand equation to be (3.6 ± 0.2) × 103 M−1. After binding to cationic pullulan, piroxicam was effectively entrapped inside the nanohydrogel particles and released in a controlled way. The obtained system was efficiently taken up by cells and was shown to be biocompatible.

Electroless Synthesis of 1.4 nm Pd and Pt Nanoparticles on Self-Assembled Rosette Nanotubes

2011 ◽  
Vol 1301 ◽  
Author(s):  
Rahul Chhabra ◽  
Hicham Fenniri
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Pt Nanoparticles ◽  
Hierarchical Organization ◽  
X Ray ◽  
Force Microscopy ◽  
Rosette Nanotubes ◽  
Atomic Force ◽  
Transmission Electron ◽  
Self Assembled

ABSTRACTElectroless synthesis and hierarchical organization of 1.4 nm Pd and Pt nanoparticles (NPs) on self-assembled Rosette Nanotubes (RNTs) is described. The nucleated NPs are nearly monodisperse and reveal supramolecular organizations guided by RNT templates. Interestingly, the narrow size distribution is attributable to unique templating behavior of RNTs. The resulting metal NP-RNT composites were characterized by Atomic Force Microscopy (AFM), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). X-ray Photoelectron Spectroscopy (XPS) was also performed to confirm the nature and composition of RNT-templated NPs.

scholarly journals PAN Nanofibers Reinforced with MMT/GO Hybrid Nanofillers

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Qingqing Wang ◽  
Guohui Li ◽  
Jinning Zhang ◽  
Fenglin Huang ◽  
Keyu Lu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Self Assembly ◽  
Decomposition Temperature ◽  
Electrospinning Process ◽  
Test Machine ◽  
Force Microscopy ◽  
Noticeable Increase ◽  
Atomic Force ◽  
Transmission Electron

Single component nanofiller has shown some limitations in its performance, which can be overcome by hybrid nanofillers with two different components. In this work, montmorillonite (MMT)/graphene oxide (GO) hybrid nanofillers were formed by self-assembly and then incorporated into the polyacrylonitrile (PAN) nanofibers by electrospinning process. X-ray diffraction (XRD), atomic force microscopy (AFM), and transmission electron microscopy (TEM) were utilized to analyze the structures of MMT/GO hybrid nanofillers. And the effects of MMT/GO hybrid nanofillers on the morphology, thermal stability, and mechanical properties of PAN/MMT/GO composite nanofibrous membrane were examined by scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and tensile test machine, respectively. The incorporation of MMT/GO hybrid nanofillers into PAN nanofibers showed a noticeable increase up to 30°C for the onset decomposition temperature and 1.32 times larger tensile strength than the pure PAN, indicating that the hybrid nanofiller is a promising candidate in improving thermal and mechanical properties of polymers.

Development and Optimization of Biometal Nanoparticles by Using Mathematical Methodology: A Microbial Approach

2015 ◽  
Vol 30 ◽  
pp. 106-115 ◽  
Author(s):  
Soheila Honary ◽  
Hamed Barabadi ◽  
Pouneh Ebrahimi ◽  
Farzaneh Naghibi ◽  
Ahad Alizadeh
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Particle Size ◽  
Atomic Force Microscopy ◽  
Oxide Nanoparticles ◽  
Visible Spectroscopy ◽  
Force Microscopy ◽  
Atomic Force ◽  
Uv Visible ◽  
Scanning Electron

This study aimed to biosynthesize and optimize the process of iron oxide nanoparticles producing by Penicilliumwaksmanii isolated from soil by employing mathematical methodology. The synthesized nanoparticles were formed with fairly well-defined dimensions with good monodispersity determined by SEM (Scanning Electron Microscopy), AFM (Atomic Force Microscopy), DLS (Dynamic Light Scattering), UV-Visible spectroscopy, zeta potential, polydispersity index (PDI) and correlogram of nanoparticles. The effects of different factors such as pH, temperature and concentration of FeCl3 on the particle size were investigated by Box-Behnken experimental design. The R2 value was calculated to be 0.9992 indicating the accuracy and ability of the polynomial model.

Ionic self-assembly of porphyrin nanostructures on the surface of charge-altered track-etched membranes

2010 ◽  
Vol 14 (05) ◽  
pp. 446-451 ◽  
Author(s):  
Nametso Mongwaketsi ◽  
Patrick G. Ndungu ◽  
Alexander Nechaev ◽  
Malik Maaza ◽  
Raymond Sparrow
Keyword(s):  
Electron Microscopy ◽  
Self Assembly ◽  
Membrane Pore ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
Self Assembled ◽  
Track Etched Membrane ◽  
Positively Charged

Track-etched polymer membranes are typically used as templates in the synthesis of various nanowires or nanotubes arrays. The unique advantages of track-etched membranes, such as uniform pore structure, excellent porosity, easily tailored pore sizes, and a well characterized surface chemistry, may find use in self-assembly strategies where colloidal nanostructures can be tethered to a suitable substrate to produce devices of interest. Meso-tetrakis(4-phenylsulfonicacid)porphyrin dihydrochloride and Sn(IV) tetrakis(4-pyridyl)porphyrin were used to synthesize ionic self-assembled porphyrin nanorods. The track-etched membranes surface charge was changed from negative to positive using polyethyleneimine. The porphyrin nanorods were either filtered through or self-assembled onto the surface of track-etched membranes. Comparisons were made with track-etched membranes modified with, and without, polyethyleneimine. Assembly of the porphyrin nanotubes only occurred on the surface of positively charged track-etched membranes, and filtration of the porphyrin nanorods produced a mesh-like structure on the surface of the membrane irrespective of the track-etched membrane pore diameter. In each case the characteristic absorbance profiles of the porphyrin nanorods was maintained. Transmission electron microscopy, scanning electron microscopy, atomic force microscopy, and UV-vis spectroscopy were used to characterize the various systems.

scholarly journals Photo-Irradiated Biosynthesis of Silver Nanoparticles Using Edible MushroomPleurotus floridaand Their Antibacterial Activity Studies

2011 ◽  
Vol 2011 ◽  
pp. 1-7 ◽  
Author(s):  
Ravishankar Bhat ◽  
Raghunandan Deshpande ◽  
Sharanabasava V. Ganachari ◽  
Do Sung Huh ◽  
A. Venkataraman
Keyword(s):  
Electron Microscopy ◽  
Silver Nanoparticles ◽  
X Ray Diffraction ◽  
Spectroscopy Analysis ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Synthetic Procedure ◽  
Uv Visible

This is a report on photo-irradiated extracellular synthesis of silver nanoparticles using the aqueous extract of edible oyster mushroom (Pleurotus florida) as a reducing agent. The appearance, size, and shape of the silver nanoparticles are understood by UV-visible spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, and atomic force microscopy. The X-ray diffraction studies, energy dispersive X-ray analysis indicate that particles are crystalline in nature. Fourier transform infrared spectroscopy analysis revealed that the nanoparticles are covered with biomoieties on their surface. As can be seen from our studies, the biofunctionalized silver nanoparticles thus produced have shown admirable antimicrobial effects, and the synthetic procedure involved is eco-friendly and simple, and hence high range production of the same can be considered for using them in many pharmaceutical applications.

Synthesis of Anisotropic, Amphiphilic Grafted Multi-Star Polymers and Investigation of their Self-Assembling Characteristics

2014 ◽  
Vol 67 (1) ◽  
pp. 49 ◽  
Author(s):  
Anton Blencowe ◽  
Jing Fung Tan ◽  
Tor Kit Goh ◽  
Kenneth N. Goldie ◽  
Xuehua Zhang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Atomic Force Microscopy ◽  
Star Polymers ◽  
The Self ◽  
Force Microscopy ◽  
Self Assembling ◽  
Atomic Force ◽  
Transmission Electron ◽  
Radical Polymerisation

Herein, we report the synthesis of amphiphilic multi-star architectures consisting of discrete poly(methacrylic acid)-based core cross-linked star polymers joined together by polystyrene-grafted linear connectors by a combination of atom transfer radical polymerisation of protected macroinitiator precursors and a copper-catalysed azide-alkyne cycloaddition grafting-to approach. The anisotropic multi-star architectures, which were obtained as individual di- and tri-star polymers with segregated hydrophobic and hydrophilic domains, undergo aggregation in apolar solvents resulting in the formation of large nanometre-scale vesicles. The self-assembling behaviour of these large amphiphilic multi-star polymers (Mw = 869–1097 kDa) was studied using dynamic light scattering, transmission electron microscopy, and atomic force microscopy.

Clathrin-Inspired Coating and Stabilization of Liposomes by DNA Self-Assembly

2019 ◽  
Author(s):  
Kevin N. Baumann ◽  
Luca Piantanida ◽  
Javier García-Nafría ◽  
Diana Sobota ◽  
Kislon Voïtchovsky ◽  
...  
Keyword(s):  
Self Assembly ◽  
Mechanical Stability ◽  
Lipid Vesicles ◽  
The Self ◽  
Force Microscopy ◽  
Atomic Force ◽  
Cryo Electron Microscopy ◽  
Further Development ◽  
Liposome Surface ◽  
Dna Coating

The self-assembly of the protein clathrin on biological membranes facilitates essential processes of endocytosis in biological systems and has provided a source of inspiration for materials design by the highly ordered structural appearance. By mimicking the architecture of clathrin self-assemblies to coat liposomes with biomaterials, new classes of hybrid carriers can be derived. Here we present a method for fabricating DNA-coated liposomes by hydrophobically anchoring and subsequently growing a DNA network on the liposome surface which structurally mimics clathrin assemblies. Dynamic light scattering (DLS), ζ-potential and cryo-electron microscopy (cryo-EM) measurements independently demonstrate successful DNA coating. Nanomechanical measurements conducted with atomic force microscopy (AFM) show that the DNA coating enhances the mechanical stability of the liposomes relative to uncoated ones. Furthermore, we provide the possibility to reverse the coating process by triggering the disassembly of the DNA coating through a toehold-mediated displacement reaction. Our results describe a straightforward, versatile, and reversible approach for coating and stabilizing lipid vesicles by an interlaced DNA network. This method has potential for further development towards the ordered arrangement of tailored functionalities on the surfaces of liposomes and for applications as hybrid nanocarrier.

Sign in / Sign up

Export Citation Format

Share Document