Atomic Level Investigations of W-Si Multilayers by High Resolution Tem and X Ray Scattering

1987 ◽  
Vol 103 ◽  
Author(s):  
S. R Nutt ◽  
J. E. Keem
Keyword(s):  
Electron Microscopy ◽  
High Resolution ◽  
High Resolution Electron Microscopy ◽  
Interface Roughness ◽  
Bilayer Thickness ◽  
Individual Layer ◽  
X Ray ◽  
X Ray Scattering ◽  
Resolution Electron ◽  
Ray Scattering

ABSTRACTWe have prepared multilayer films of W-Si with bilayer repeat spacing from approximately 1.5 nm to 9 nm and performed high resolution electron microscopy and low angle x-ray scattering on them. Average composition estimates as inferred from deposition conditions, x ray scattering and electron microscopy are compared. Determinations of the individual layer thickness ratios by electron microscopy and x ray scattering vary significantly from expectations as the bilayer thickness approaches 1.5 nm. Layer intermixing to increase as the bilayer thickness decreases. Composition profiles as inferred from the Cuk x ray profile are compared to those inferred from the high resolution electron micrographs. Visual observations from melectron microscopy are presented indicating that the interface roughness is rapidly damped in the W-Si multilayer system. Estimates of the layer uniformity are made from the high resolution images.

Morphology of Vapor Evaporated Mo Thin Films

1991 ◽  
Vol 222 ◽  
Author(s):  
Y. Cheng ◽  
M. B. Stearns
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
High Resolution ◽  
Large Angle ◽  
High Resolution Electron Microscopy ◽  
Cross Sectional ◽  
X Ray ◽  
X Ray Scattering ◽  
Resolution Electron ◽  
Deposition Angle

ABSTRACTStudies were made of the dependence of the morphology of Mo films, prepared by ebeam evaporation in an UHV system, on the substrate temperature and deposition angle. The main characterization techniques used were large angle x-ray scattering and cross-sectional high resolution electron microscopy.

Electron microscopy of rabbit FC crystals

1983 ◽  
Vol 41 ◽  
pp. 730-731
Author(s):  
Robert A. Grant ◽  
Laura L. Degn ◽  
Wah Chiu ◽  
John Robinson
Keyword(s):  
Electron Microscopy ◽  
High Resolution ◽  
High Resolution Electron Microscopy ◽  
Molecular Replacement ◽  
X Ray ◽  
X Ray Crystallography ◽  
Resolution Electron ◽  
Replacement Technique ◽  
Hydrated Crystal ◽  
Molecular Structure Analysis

Proteolytic digestion of the immunoglobulin IgG with papain cleaves the molecule into an antigen binding fragment, Fab, and a compliment binding fragment, Fc. Structures of intact immunoglobulin, Fab and Fc from various sources have been solved by X-ray crystallography. Rabbit Fc can be crystallized as thin platelets suitable for high resolution electron microscopy. The structure of rabbit Fc can be expected to be similar to the known structure of human Fc, making it an ideal specimen for comparing the X-ray and electron crystallographic techniques and for the application of the molecular replacement technique to electron crystallography. Thin protein crystals embedded in ice diffract to high resolution. A low resolution image of a frozen, hydrated crystal can be expected to have a better contrast than a glucose embedded crystal due to the larger density difference between protein and ice compared to protein and glucose. For these reasons we are using an ice embedding technique to prepare the rabbit Fc crystals for molecular structure analysis by electron microscopy.

Characterisation of planar crystal defects in Y2Fe17Cx (0.6 ≤ x ≤ 1.6) magnetic material by High Resolution Electron Microscopy

1990 ◽  
Vol 48 (4) ◽  
pp. 774-775
Author(s):  
W. Coene ◽  
F. Hakkens ◽  
T.H. Jacobs ◽  
K.H.J. Buschow
Keyword(s):  
Electron Microscopy ◽  
High Resolution ◽  
Permanent Magnets ◽  
Annealing Treatment ◽  
High Resolution Electron Microscopy ◽  
Crystal Defects ◽  
Ordered Structure ◽  
X Ray ◽  
Planar Crystal ◽  
Resolution Electron

Intermetallic compounds of the type RE2Fe17Cx (RE= rare earth element) are promising candidates for permanent magnets. In case of Y2Fe17Cx, the Curie temperature increases from 325 K for x =0 to 550 K for x = 1.6 . X ray and electron diffraction reveal a carbon - induced structural transformation in Y2Fe17Cx from the hexagonal Th2Ni17 - type (x < 0.6 ) to the rhombohedral Th2Zn17 - type ( x ≥ 0.6). Planar crystal defects introduce local sheets of different magnetic anisotropy as compared with the ordered structure, and therefore may have an important impact on the coercivivity mechanism .High resolution electron microscopy ( HREM ) on a Philips CM30 / Super Twin has been used to characterize planar crystal defects in rhombohedral Y2Fe17Cx ( x ≥ 0.6 ). The basal plane stacking sequences are imaged in the [100] - orientation, showing an ABC or ACB sequence of Y - atoms and Fe2 - dumbbells, for both coaxial twin variants, respectively . Compounds resulting from a 3 - week annealing treatment at high temperature ( Ta = 1000 - 1100°C ) contain a high density of planar defects.

Fabrication and characterization - by High Resolution Electron Microscopy and atom probe microanalysis - of Co-based metallic multilayer films

1990 ◽  
Vol 48 (4) ◽  
pp. 772-773
Author(s):  
Amanda K. Petford-Long ◽  
A. Cerezo ◽  
M.G. Hetherington
Keyword(s):  
Electron Microscopy ◽  
High Resolution ◽  
High Resolution Electron Microscopy ◽  
Atom Probe ◽  
Multilayer Films ◽  
Interface Roughness ◽  
Probe Field ◽  
Resolution Electron ◽  
Potential Applications ◽  
Field Ion Microscope

The fabrication of multilayer films (MLF) with layer thicknesses down to one monolayer has led to the development of materials with unique properties not found in bulk materials. The properties of interest depend critically on the structure and composition of the films, with the interfacial regions between the layers being of particular importance. There are a number of magnetic MLF systems based on Co, several of which have potential applications as perpendicular magnetic (e.g Co/Cr) or magneto-optic (e.g. Co/Pt) recording media. Of particular concern are the effects of parameters such as crystallographic texture and interface roughness, which are determined by the fabrication conditions, on magnetic properties and structure.In this study we have fabricated Co-based MLF by UHV thermal evaporation in the prechamber of an atom probe field-ion microscope (AP). The multilayers were deposited simultaneously onto cobalt field-ion specimens (for AP and position-sensitive atom probe (POSAP) microanalysis without exposure to atmosphere) and onto the flat (001) surface of oxidised silicon wafers (for subsequent study in cross-section using high-resolution electron microscopy (HREM) in a JEOL 4000EX. Deposi-tion was from W filaments loaded with material in the form of wire (Co, Fe, Ni, Pt and Au) or flakes (Cr). The base pressure in the chamber was around 8×10−8 torr during deposition with a typical deposition rate of 0.05 - 0.2nm/s.

X-Ray-Optical Multilayer Structures Studied Using High Resolution Electron Microscopy.

1986 ◽  
Vol 77 ◽  
Author(s):  
Mary Beth Stearns ◽  
Amanda K. Petford-Long ◽  
C.-H. Chang ◽  
D. G. Stearns ◽  
N. M. Ceglio ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
High Resolution ◽  
Substrate Surface ◽  
High Resolution Electron Microscopy ◽  
Atomic Scale ◽  
Degree Of Crystallinity ◽  
Multilayer Systems ◽  
Layer Width ◽  
X Ray ◽  
Resolution Electron

ABSTRACTThe technique of high resolution electron microscopy has been used to examine the structure of several multilayer systems (MLS) on an atomic scale. Mo/Si multilayers, in use in a number of x-ray optical element applications, and Mo/Si multilayers, of interest because of their magnetic properties, have been imaged in cross-section. Layer thicknesses, flatness and smoothness have been analysed: the layer width can vary by up to 0.6nm from the average value, and the layer flatness depends on the quality of the substrate surface for amorphous MLS, and on the details of the crystalline growth for the crystalline materials. The degree of crystallinity and the crystal orientation within the layers have also been investigated. In both cases, the high-Z layers are predominantly crystalline and the Si layers appear amorphous. Amorphous interfacial regions are visible between the Mo and Si layers, and crystalline cobalt suicide interfacial regions between the Co and Si layers. Using the structural measurements obtained from the HREM results, theoretical x-ray reflectivity behaviour has been calculated. It fits the experimental data very well.

Sign in / Sign up

Export Citation Format

Share Document