scholarly journals In-situ Study of Electromigration-induced Grain Rotation in Pb-free Solder Joint by Synchrotron Microdiffraction

2008 ◽  
Vol 1116 ◽  
Author(s):  
Kai Chen ◽  
Nobumichi Tamura ◽  
King-Ning Tu
Keyword(s):  
Solder Joint ◽  
Flip Chip ◽  
Solder Joints ◽  
Electric Resistance ◽  
Grain Rotation ◽  
X Ray ◽  
In Situ Study ◽  
Free Solder ◽  
Interconnect Lines

AbstractThe rotation of Sn grains in Pb-free flip chip solder joints hasn't been reported in literature so far although it has been observed in Sn strips. In this letter, we report the detailed study of the grain orientation evolution induced by electromigration by synchrotron based white beam X-ray microdiffraction. It is found that the grains in solder joint rotate more slowly than in Sn strip even under higher current density. On the other hand, based on our estimation, the reorientation of the grains in solder joints also results in the reduction of electric resistivity, similar to the case of Sn strip. We will also discuss the reason why the electric resistance decreases much more in strips than in the Sn-based solders, and the different driving force for the grain growth in solder joint and in thin film interconnect lines.

SAC–xTiO2 nano-reinforced lead-free solder joint characterizations in ultra-fine package assembly

2018 ◽  
Vol 30 (1) ◽  
pp. 1-13 ◽  
Author(s):  
Fakhrozi Che Ani ◽  
Azman Jalar ◽  
Abdullah Aziz Saad ◽  
Chu Yee Khor ◽  
Roslina Ismail ◽  
...  
Keyword(s):  
Electron Microscope ◽  
Solder Joint ◽  
Solder Joints ◽  
Ion Beam ◽  
Lead Free ◽  
Lead Free Solder ◽  
Solder Paste ◽  
Content Type ◽  
X Ray ◽  
Free Solder

Purpose This paper aims to investigate the characteristics of ultra-fine lead-free solder joints reinforced with TiO2 nanoparticles in an electronic assembly. Design/methodology/approach This study focused on the microstructure and quality of solder joints. Various percentages of TiO2 nanoparticles were mixed with a lead-free Sn-3.5Ag-0.7Cu solder paste. This new form of nano-reinforced lead-free solder paste was used to assemble a miniature package consisting of an ultra-fine capacitor on a printed circuit board by means of a reflow soldering process. The microstructure and the fillet height were investigated using a focused ion beam, a high-resolution transmission electron microscope system equipped with an energy dispersive X-ray spectrometer (EDS), and a field emission scanning electron microscope coupled with an EDS and X-ray diffraction machine. Findings The experimental results revealed that the intermetallic compound with the lowest thickness was produced by the nano-reinforced solder with a TiO2 content of 0.05 Wt.%. Increasing the TiO2 content to 0.15 Wt.% led to an improvement in the fillet height. The characteristics of the solder joint fulfilled the reliability requirements of the IPC standards. Practical implications This study provides engineers with a profound understanding of the characteristics of ultra-fine nano-reinforced solder joint packages in the microelectronics industry. Originality/value The findings are expected to provide proper guidelines and references with regard to the manufacture of miniaturized electronic packages. This study also explored the effects of TiO2 on the microstructure and the fillet height of ultra-fine capacitors.

Application of Finite Element Method in Optimal Design of Flip-Chip Package

2011 ◽  
Vol 264-265 ◽  
pp. 1660-1665
Author(s):  
Yong Cheng Lin ◽  
Yu Chi Xia
Keyword(s):  
Finite Element ◽  
Fatigue Life ◽  
Solder Joint ◽  
Thermal Fatigue ◽  
Flip Chip ◽  
Solder Joints ◽  
Temperature Cycling ◽  
Lead Free ◽  
Lead Free Solder ◽  
Free Solder

More and more solder joints in circuit boards and electronic products are changing to lead free solder, placing an emphasis on lead free solder joint reliability. Solder joint fatigue failure is a serious reliability concern in area array technologies. In this study, the effects of substrate materials on the solder joint thermal fatigue life were investigated by finite element model. Accelerated temperature cycling loading was imposed to evaluate the reliability of solder joints. The thermal strain/stress in solder joints of flip chip assemblies with different substrates was compared, and the fatigue life of solder joints were evaluated by Darveaux’s crack initiation and growth model. The results show the mechanisms of substrate flexibility on improving solder joint thermal fatigue.

Quantitative Evaluation of Voids in Lead Free Solder Joints

2015 ◽  
Vol 772 ◽  
pp. 284-289 ◽  
Author(s):  
Sabuj Mallik ◽  
Jude Njoku ◽  
Gabriel Takyi
Keyword(s):  
Solder Bump ◽  
Solder Joints ◽  
Void Formation ◽  
Lead Free ◽  
Lead Free Solder ◽  
Solder Paste ◽  
X Ray ◽  
Size And Shape ◽  
Solder Bumps ◽  
Free Solder

Voiding in solder joints poses a serious reliability concern for electronic products. The aim of this research was to quantify the void formation in lead-free solder joints through X-ray inspections. Experiments were designed to investigate how void formation is affected by solder bump size and shape, differences in reflow time and temperature, and differences in solder paste formulation. Four different lead-free solder paste samples were used to produce solder bumps on a number of test boards, using surface mount reflow soldering process. Using an advanced X-ray inspection system void percentages were measured for three different size and shape solder bumps. Results indicate that the voiding in solder joint is strongly influenced by solder bump size and shape, with voids found to have increased when bump size decreased. A longer soaking period during reflow stage has negatively affectedsolder voids. Voiding was also accelerated with smaller solder particles in solder paste.

Sign in / Sign up

Export Citation Format

Share Document