scholarly journals Capacitive Field-effect (bio-)chemical Sensors Based on Nanocrystalline Diamond Films

2009 ◽  
Vol 1203 ◽  
Author(s):  
Matthias Bäcker ◽  
Arshak Poghossian ◽  
Maryam H. Abouzar ◽  
Sylvia Wenmackers ◽  
Stoffel D. Janssens ◽  
...  
Keyword(s):  
Thin Films ◽  
Field Effect ◽  
High Sensitivity ◽  
Ph Sensitive ◽  
Nanocrystalline Diamond ◽  
Penicillin G ◽  
Layer By Layer ◽  
Label Free ◽  
High Coverage ◽  
Layer Adsorption

AbstractCapacitive field-effect electrolyte-diamond-insulator-semiconductor (EDIS) structures with O-terminated nanocrystalline diamond (NCD) as sensitive gate material have been realized and investigated for the detection of pH, penicillin concentration, and layer-by-layer adsorption of polyelectrolytes. The surface oxidizing procedure of NCD thin films as well as the seeding and NCD growth process on a Si-SiO2 substrate have been improved to provide high pH-sensitive, non-porous thin films without damage of the underlying SiO2 layer and with a high coverage of O-terminated sites. The NCD surface topography, roughness, and coverage of the surface groups have been characterized by SEM, AFM and XPS methods. The EDIS sensors with O-terminated NCD film treated in oxidizing boiling mixture for 45 min show a pH sensitivity of about 50 mV/pH. The pH-sensitive properties of the NCD have been used to develop an EDIS-based penicillin biosensor with high sensitivity (65-70 mV/decade in the concentration range of 0.25-2.5 mM penicillin G) and low detection limit (5 μM). The results of label-free electrical detection of layer-by-layer adsorption of charged polyelectrolytes are presented, too.

Towards Label-free Detection of Charged Macromolecules Using Field-effect-based Structures: Scaling Down from Capacitive EIS Sensor over ISFET to Nano-scale Devices

2006 ◽  
Vol 915 ◽  
Author(s):  
Michael J. Schoening ◽  
Maryam H. Abouzar ◽  
Sven Ingebrandt ◽  
Johannes Platen ◽  
Andreas Offenhaeusser ◽  
...  
Keyword(s):  
Field Effect ◽  
Deep Understanding ◽  
Layer By Layer ◽  
Label Free ◽  
New Approach ◽  
Charged Surfaces ◽  
Physiological Processes ◽  
Layer Adsorption ◽  
Label Free Detection ◽  
Charged Macromolecules

AbstractThe possibility of a label-free electrical detection of charged macromolecules using semiconductor field-effect sensors offers a new approach for the development of DNA chips with fast and direct electrical readout. A deep understanding of the adsorption and interaction of charged biomolecules onto charged surfaces is of great interest also for the fundamental understanding of many key physiological processes. In the present work, two types of field-effect sensors, namely a capacitive EIS (electrolyte-insulator-semiconductor) structure and an ISFET (ion-sensitive field-effect transistor) have been utilised for monitoring layer-by-layer adsorption of polyelectrolytes as well as for the DNA immobilisation and hybridisation detection.

scholarly journals Plasmonics for Biosensing

Materials ◽  
2019 ◽  
Vol 12 (9) ◽  
pp. 1411 ◽  
Author(s):  
Xue Han ◽  
Kun Liu ◽  
Changsen Sun
Keyword(s):  
Thin Films ◽  
Molecular Level ◽  
Point Of Care ◽  
High Sensitivity ◽  
Short Review ◽  
Dynamic Monitoring ◽  
Label Free ◽  
Plasmonic Resonance ◽  
Hybrid Functions ◽  
Resonance Modes

Techniques based on plasmonic resonance can provide label-free, signal enhanced, and real-time sensing means for bioparticles and bioprocesses at the molecular level. With the development in nanofabrication and material science, plasmonics based on synthesized nanoparticles and manufactured nano-patterns in thin films have been prosperously explored. In this short review, resonance modes, materials, and hybrid functions by simultaneously using electrical conductivity for plasmonic biosensing techniques are exclusively reviewed for designs containing nanovoids in thin films. This type of plasmonic biosensors provide prominent potential to achieve integrated lab-on-a-chip which is capable of transporting and detecting minute of multiple bio-analytes with extremely high sensitivity, selectivity, multi-channel and dynamic monitoring for the next generation of point-of-care devices.

Field-effect sensors for monitoring the layer-by-layer adsorption of charged macromolecules

2006 ◽  
Vol 118 (1-2) ◽  
pp. 163-170 ◽  
Author(s):  
A. Poghossian ◽  
M.H. Abouzar ◽  
M. Sakkari ◽  
T. Kassab ◽  
Y. Han ◽  
...  
Keyword(s):  
Field Effect ◽  
Layer By Layer ◽  
Layer Adsorption ◽  
Charged Macromolecules

scholarly journals Rapid Determination of Ochratoxin A in Grape and Its Commodities Based on a Label-Free Impedimetric Aptasensor Constructed by Layer-by-Layer Self-Assembly

Toxins ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 71 ◽  
Author(s):  
Mina Nan ◽  
Yang Bi ◽  
Huali Xue ◽  
Sulin Xue ◽  
Haitao Long ◽  
...  
Keyword(s):  
Ochratoxin A ◽  
Self Assembly ◽  
Electrochemical Impedance ◽  
Rapid Determination ◽  
Grape Juice ◽  
High Sensitivity ◽  
Layer By Layer ◽  
Label Free ◽  
Transfer Resistance

A simple and sensitive label-free impedimetric aptasensor for rapid determination of ochratoxin A (OTA) has been developed, which was based on the combination between thiolated aptamer and gold nanoparticles by layer-by-layer self-assembly. Because of the interaction between aptamer and OTA, the relative normalized electron-transfer resistance (ΔRct) values obtained by electrochemical impedance spectroscopy (EIS) was proportional to the concentration of OTA and showed a good linear relationship from 0.1 to 10.0 ng/mL, with a lower detection limit (0.030 ng/mL) than one-step thiolated DNA aptasensor. The established method was successfully applied to detect and analyze OTA in table wine and grape juice, and the recovery was 90.56%–104.21% when PVP effective removed of phenolic substances. The label-free impedimetric aptasensor was used for rapid detection and quantitation of OTA in the inoculated grapes with the Aspergillus Nigri (H1), and the production of OTA (62.4 μg/kg, 20 μg/kg) far exceeded the maximum levels of 2 μg/kg after inoculation for three days. The developed method exhibited a good specificity, high sensitivity, time-efficient, and it could be applied to detect the OTA concentration in grape and its commodities.

scholarly journals Layer-by-layer biofunctionalization of nanostructured porous silicon for high-sensitivity and high-selectivity label-free affinity biosensing

2018 ◽  
Vol 9 (1) ◽  
Author(s):  
Stefano Mariani ◽  
Valentina Robbiano ◽  
Lucanos M. Strambini ◽  
Aline Debrassi ◽  
Gabriela Egri ◽  
...  
Keyword(s):  
Porous Silicon ◽  
High Selectivity ◽  
High Sensitivity ◽  
Layer By Layer ◽  
Label Free

scholarly journals Recent Advances of Field-Effect Transistor Technology for Infectious Diseases

Biosensors ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 103
Author(s):  
Abbas Panahi ◽  
Deniz Sadighbayan ◽  
Saghi Forouhi ◽  
Ebrahim Ghafar-Zadeh
Keyword(s):  
Infectious Diseases ◽  
Field Effect ◽  
Field Effect Transistor ◽  
Limit Of Detection ◽  
Point Of Care ◽  
High Sensitivity ◽  
Cmos Technology ◽  
Oxide Semiconductor ◽  
Label Free ◽  
Effect Transistor

Field-effect transistor (FET) biosensors have been intensively researched toward label-free biomolecule sensing for different disease screening applications. High sensitivity, incredible miniaturization capability, promising extremely low minimum limit of detection (LoD) at the molecular level, integration with complementary metal oxide semiconductor (CMOS) technology and last but not least label-free operation were amongst the predominant motives for highlighting these sensors in the biosensor community. Although there are various diseases targeted by FET sensors for detection, infectious diseases are still the most demanding sector that needs higher precision in detection and integration for the realization of the diagnosis at the point of care (PoC). The COVID-19 pandemic, nevertheless, was an example of the escalated situation in terms of worldwide desperate need for fast, specific and reliable home test PoC devices for the timely screening of huge numbers of people to restrict the disease from further spread. This need spawned a wave of innovative approaches for early detection of COVID-19 antibodies in human swab or blood amongst which the FET biosensing gained much more attention due to their extraordinary LoD down to femtomolar (fM) with the comparatively faster response time. As the FET sensors are promising novel PoC devices with application in early diagnosis of various diseases and especially infectious diseases, in this research, we have reviewed the recent progress on developing FET sensors for infectious diseases diagnosis accompanied with a thorough discussion on the structure of Chem/BioFET sensors and the readout circuitry for output signal processing. This approach would help engineers and biologists to gain enough knowledge to initiate their design for accelerated innovations in response to the need for more efficient management of infectious diseases like COVID-19.

Sign in / Sign up

Export Citation Format

Share Document