Optimizing sulfurisation conditions in the fabrication of Cu2ZnSnS4absorber layers from electroplated precursors

2009 ◽  
Vol 1210 ◽  
Author(s):  
Jonathan James Scragg ◽  
Daniel Wolverson ◽  
Guillaume Zoppi ◽  
Laurence M Peter
Keyword(s):  
Simple Model ◽  
Grain Growth ◽  
Phase Formation ◽  
Bulk Material ◽  
Limiting Factor ◽  
Processing Conditions ◽  
Surface Phases ◽  
Rate Limiting ◽  
Temperature Time ◽  
Photoelectrochemical Measurement

AbstractUsing direct photoelectrochemical measurement of the photocurrent obtained from Cu2ZnSnS4(CZTS) absorber layers made by a two-stage electroplating-sulfurisation process, the influence of processing conditions (temperature, time, and pressure) on material quality was investigated with a view to understanding the long sulfurisation times usually found in the literature. The improvement in photocurrent due to KCN etching was also studied, and seems to be due both to removal of surface phases and also slower etching of the bulk material. The optimum sulfurisation time was found to be around 50 minutes, despite evidence that sulfur incorporation and phase formation are complete within 5 minutes. Slow grain growth was suggested as a rate-limiting factor, and a rate constant was derived based on a simple model.

CBED analysis of impurity distributions in AlN

1990 ◽  
Vol 48 (4) ◽  
pp. 214-215
Author(s):  
Daniel Callahan ◽  
G. Thomas
Keyword(s):  
Aluminum Nitride ◽  
Bulk Material ◽  
Strong Dependence ◽  
Lattice Parameter ◽  
Promising Technique ◽  
Nitride Ceramics ◽  
Surface Phases ◽  
Convergent Beam ◽  
Oxygen Impurities

Oxygen impurities may significantly influence the properties of nitride ceramics with a strong dependence on the microstructural distribution of the impurity. For example, amorphous oxygen-rich grain boundary phases are well-known to cause high-temperature mechanical strength degradation in silicon nitride whereas solutionized oxygen is known to decrease the thermal conductivity of aluminum nitride. Microanalytical characterization of these impurities by spectral methods in the AEM is complicated by reactions which form oxygen-rich surface phases not representative of the bulk material. Furthermore, the impurity concentrations found in higher quality ceramics may be too low to measure by EDS or PEELS. Consequently an alternate method for the characterization of impurities in these ceramics has been investigated.Convergent beam electron diffraction (CBED) is a promising technique for the study of impurity distributions in aluminum nitride ceramics. Oxygen is known to enter into stoichiometric solutions with AIN with a consequent decrease in lattice parameter.

Freezing in Silicon at Large Undercooling

1989 ◽  
Vol 157 ◽  
Author(s):  
P.A. Stolk ◽  
A. Polman ◽  
W.C. Sinke
Keyword(s):  
Interface Temperature ◽  
Limiting Factor ◽  
Time Resolved ◽  
Large Undercooling ◽  
Explosive Crystallization ◽  
Crystallization Speed ◽  
Solid Liquid Interface ◽  
Solid Liquid ◽  
Rate Limiting

ABSTRACTPulsed laser irradiation is used to induce epitaxial explosive crystallization of amorphous silicon layers buried in a (100) oriented crystalline matrix. This process is mediated by a self-propagating liquid layer. Time-resolved determination of the crystallization speed combined with numerical calculation of the interface temperature shows that freezing in silicon saturates at 16 m/s for large undercooling (> 130 K). A comparison between data and different models for melting and freezing indicates that the crystallization behavior at large undercooling can be described correctly if the rate-limiting factor is assumed to be diffusion in liquid Si at the solid/liquid interface.

scholarly journals Flow fields associated with in situ mineral leaching

1994 ◽  
Vol 36 (2) ◽  
pp. 133-151 ◽  
Author(s):  
Lawrence K. Forbes ◽  
Anthony M. Watts ◽  
Graeme A. Chandler
Keyword(s):  
Simple Model ◽  
Free Boundary ◽  
Numerical Method ◽  
Flow Rate ◽  
Recovery Rate ◽  
Flow Fields ◽  
Vertical Line ◽  
Rate Limiting ◽  
Mineral Leaching

AbstractA simple model for underground mineral leaching is considered, in which liquor is injected into the rock at one point and retrieved from the rock by being pumped out at another point. In its passage through the rock, the liquor dissolves some of the ore of interest, and this is therefore recovered in solution. When the injection and recovery points lie on a vertical line, the region of wetted rock forms an axi-symmetric plume, the surface of which is a free boundary. We present an accurate numerical method for the solution of the problem, and obtain estimates for the maximum possible recovery rate of the liquor, as a fraction of the injected flow rate. Limiting cases are discussed, and other geometries for fluid recovery are considered.

scholarly journals Recognized and Emerging Features of Erythropoietic and X-Linked Protoporphyria

Diagnostics ◽  
2022 ◽  
Vol 12 (1) ◽  
pp. 151
Author(s):  
Elena Di Pierro ◽  
Francesca Granata ◽  
Michele De Canio ◽  
Mariateresa Rossi ◽  
Andrea Ricci ◽  
...  
Keyword(s):  
Biosynthetic Pathway ◽  
Aminolevulinic Acid ◽  
Protoporphyrin Ix ◽  
Limiting Factor ◽  
Zinc Protoporphyrin ◽  
Complete Understanding ◽  
Inherited Disorders ◽  
Rate Limiting ◽  
Systemic Accumulation ◽  
Made In

Erythropoietic protoporphyria (EPP) and X-linked protoporphyria (XLP) are inherited disorders resulting from defects in two different enzymes of the heme biosynthetic pathway, i.e., ferrochelatase (FECH) and delta-aminolevulinic acid synthase-2 (ALAS2), respectively. The ubiquitous FECH catalyzes the insertion of iron into the protoporphyrin ring to generate the final product, heme. After hemoglobinization, FECH can utilize other metals like zinc to bind the remainder of the protoporphyrin molecules, leading to the formation of zinc protoporphyrin. Therefore, FECH deficiency in EPP limits the formation of both heme and zinc protoporphyrin molecules. The erythroid-specific ALAS2 catalyses the synthesis of delta-aminolevulinic acid (ALA), from the union of glycine and succinyl-coenzyme A, in the first step of the pathway in the erythron. In XLP, ALAS2 activity increases, resulting in the amplified formation of ALA, and iron becomes the rate-limiting factor for heme synthesis in the erythroid tissue. Both EPP and XLP lead to the systemic accumulation of protoporphyrin IX (PPIX) in blood, erythrocytes, and tissues causing the major symptom of cutaneous photosensitivity and several other less recognized signs that need to be considered. Although significant advances have been made in our understanding of EPP and XLP in recent years, a complete understanding of the factors governing the variability in clinical expression and the severity (progression) of the disease remains elusive. The present review provides an overview of both well-established facts and the latest findings regarding these rare diseases.

scholarly journals Neutrophil Extracellular Traps-DNase Balance and Autoimmunity

Cells ◽  
2021 ◽  
Vol 10 (10) ◽  
pp. 2667
Author(s):  
Andrea Angeletti ◽  
Stefano Volpi ◽  
Maurizio Bruschi ◽  
Francesca Lugani ◽  
Augusto Vaglio ◽  
...  
Keyword(s):  
Lupus Erythematosus ◽  
Causative Factor ◽  
Neutrophil Extracellular Traps ◽  
Limiting Factor ◽  
Systemic Lupus ◽  
Extracellular Traps ◽  
Number Of Patients ◽  
Selective Depletion ◽  
Dna Antibodies ◽  
Rate Limiting

Neutrophil extracellular traps (NETs) are macromolecular structures programmed to trap circulating bacteria and viruses. The accumulation of NETs in the circulation correlates with the formation of anti-double-stranded (ds) DNA antibodies and is considered a causative factor for systemic lupus erythematosus (SLE). The digestion of DNA by DNase1 and DNases1L3 is the rate- limiting factor for NET accumulation. Mutations occurring in one of these two DNASE genes determine anti-DNA formation and are associated with severe Lupus-like syndromes and lupus nephritis (LN). A second mechanism that may lead to DNase functional impairment is the presence of circulating DNase inhibitors in patients with low DNase activity, or the generation of anti-DNase antibodies. This phenomenon has been described in a relevant number of patients with SLE and may represent an important mechanism determining autoimmunity flares. On the basis of the reviewed studies, it is tempting to suppose that the blockade or selective depletion of anti-DNase autoantibodies could represent a potential novel therapeutic approach to prevent or halt SLE and LN. In general, strategies aimed at reducing NET formation might have a similar impact on the progression of SLE and LN.

scholarly journals Glypican-1 drives unconventional secretion of Fibroblast Growth Factor 2

2021 ◽  
Author(s):  
Carola Sparn ◽  
Eleni Dimou ◽  
Annalena Meyer ◽  
Roberto Saleppico ◽  
Sabine Wegehingel ◽  
...  
Keyword(s):  
Growth Factor ◽  
Heparan Sulfate ◽  
Fibroblast Growth Factor ◽  
Fibroblast Growth Factor 2 ◽  
Structural Basis ◽  
Limiting Factor ◽  
Fibroblast Growth ◽  
Unconventional Secretion ◽  
Rate Limiting

Fibroblast Growth Factor 2 (FGF2) is a tumor cell survival factor that is transported into the extracellular space by an unconventional secretory mechanism. Cell surface heparan sulfate proteoglycans are known to play an essential role in this process. Unexpectedly, we found that among the diverse sub-classes consisting of syndecans, perlecans, glypicans and others, Glypican-1 (GPC1) is both the principle and rate-limiting factor that drives unconventional secretion of FGF2. By contrast, we demonstrate GPC1 to be dispensable for FGF2 signaling into cells. We provide first insights into the structural basis for GPC1-dependent FGF2 secretion, identifying disaccharides with N-linked sulfate groups to be enriched in the heparan sulfate chains of GPC1 to which FGF2 binds with high affinity. Our findings have broad implications for the role of GPC1 as a key molecule in tumor progression.

Availability of Cosubstrates as a Rate-Limiting Factor

2020 ◽  
pp. 119-178
Author(s):  
Gerard J. Mulder ◽  
Klaas R. Krijgsheld
Keyword(s):  
Limiting Factor ◽  
Rate Limiting

Austenite in Steel

2015 ◽  
pp. 133-162
Keyword(s):  
Grain Size ◽  
Grain Growth ◽  
Hot Deformation ◽  
Parent Phase ◽  
Austenite Formation ◽  
Processing Conditions ◽  
Austenitic Grain Size

Austenite is the key to the versatility of steel and the controllable nature of its properties. It is the parent phase of pearlite, martensite, bainite, and ferrite. This chapter discusses the importance of austenite, beginning with the influence of austenitic grain size and how to accurately measure it. It then describes the principles of austenite formation and grain growth and examines several time-temperature-austenitizing diagrams representing various alloying and processing conditions. The chapter concludes with a discussion on hot deformation and subsequent recrystallization.

Sign in / Sign up

Export Citation Format

Share Document