A Kinetic Model for Metalorganic Chemical Vapor Deposition of GaAs from Trimethylgallium and Arsine

1988 ◽  
Vol 131 ◽  
Author(s):  
Triantafillos J. Mountziaris ◽  
Klavs F. Jensen
Keyword(s):  
Chemical Vapor Deposition ◽  
Kinetic Model ◽  
Gas Phase ◽  
Vapor Deposition ◽  
Metalorganic Chemical Vapor Deposition ◽  
Transport Model ◽  
Surface Reactions ◽  
Experimental Studies ◽  
Chemical Vapor ◽  
Metalorganic Chemical

ABSTRACTA kinetic model for metalorganic chemical vapor deposition (MOCVD) of GaAs from trimethylgallium and arsine is presented. The proposed mechanism includes 15 gas-phase species, 17 gas-phase reactions, 9 surface species and 29 surface reactions. The surface reactions take into account different crystallographic orientations of the GaAs substrate. Sensitivity analysis and existing experimental observations have been used to develop the reduced mechanism from the large number of reactions that might in principle occur. Rate constants are estimated by using thermochemical methods and reported experimental data. The kinetic mechanism is combined with a two-dimensional transport model of a hot-wall tubular reactor used in experimental studies. Model predictions of gas-phase composition and GaAs growth rates show good agreement with published experimental studies. In addition, the model predicts reported trends in carbon incorporation.

Kinetics of Diamond-Like Film Growth Using Filament-Assisted Chemical Vapor Deposition

1994 ◽  
Vol 363 ◽  
Author(s):  
G. Gorsuch ◽  
Y. Jin ◽  
N. K. Ingle ◽  
T. J. Mountziarisi ◽  
W.-Y. Yu ◽  
...  
Keyword(s):  
Chemical Vapor Deposition ◽  
Kinetic Model ◽  
Gas Phase ◽  
Vapor Deposition ◽  
Film Growth ◽  
Transport Model ◽  
Surface Reactions ◽  
Chemical Vapor ◽  
Surface Kinetics ◽  
Si Substrates

AbstractA detailed kinetic model of diamond-like film growth from methane diluted in hydrogen using low-pressure, filament-assisted chemical vapor deposition (FACVD) has been developed. The model includes both gas-phase and surface reactions. The surface kinetics include adsorption of CH3· and H·, abstraction reactions by gas-phase radicals, desorption, and two pathways for diamond (sp3) and graphitic carbon (sp2) growth. It is postulated that adsorbed CH2· species are the major film precursors. The proposed kinetic model was incorporated into a transport model describing flow, heat and mass transfer in stagnation flow FACVD reactors. Diamond-like films were deposited on preseeded Si substrates in such a reactor at a pressure of 26 Torr, inlet gas composition ranging from 0.5% to 1.5% methane in hydrogen and substrate temperatures ranging from 600 to 950°C. The best films were obtained at low methane concentrations and substrate temperature of 700°C. The films were characterized using Scanning Electron Microscopy (SEM) and Raman spectroscopy. Observations from our experiments and growth rate data from similar experiments reported in the literature [1] were used to estimate unknown kinetic parameters of surface reactions. The proposed model predicts observed film growth rates, compositions and stable species distributions in the gas phase. It is the first complete model of FACVD that includes gas-phase and surface kinetics coupled with transport phenomena.

scholarly journals Metalorganic chemical vapor deposition of InN quantum dots and nanostructures

2021 ◽  
Vol 10 (1) ◽  
Author(s):  
Caroline E. Reilly ◽  
Stacia Keller ◽  
Shuji Nakamura ◽  
Steven P. DenBaars
Keyword(s):  
Quantum Dots ◽  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
Metalorganic Chemical Vapor Deposition ◽  
Near Infrared ◽  
Optoelectronic Devices ◽  
Chemical Vapor ◽  
Electromagnetic Spectrum ◽  
Material System ◽  
Metalorganic Chemical

AbstractUsing one material system from the near infrared into the ultraviolet is an attractive goal, and may be achieved with (In,Al,Ga)N. This III-N material system, famous for enabling blue and white solid-state lighting, has been pushing towards longer wavelengths in more recent years. With a bandgap of about 0.7 eV, InN can emit light in the near infrared, potentially overlapping with the part of the electromagnetic spectrum currently dominated by III-As and III-P technology. As has been the case in these other III–V material systems, nanostructures such as quantum dots and quantum dashes provide additional benefits towards optoelectronic devices. In the case of InN, these nanostructures have been in the development stage for some time, with more recent developments allowing for InN quantum dots and dashes to be incorporated into larger device structures. This review will detail the current state of metalorganic chemical vapor deposition of InN nanostructures, focusing on how precursor choices, crystallographic orientation, and other growth parameters affect the deposition. The optical properties of InN nanostructures will also be assessed, with an eye towards the fabrication of optoelectronic devices such as light-emitting diodes, laser diodes, and photodetectors.

Sign in / Sign up

Export Citation Format

Share Document