Clustering Analysis in Boron and Phosphorus Implanted (100) Germanium by X-Ray Absorption Spectroscopy

2005 ◽  
Vol 864 ◽  
Author(s):  
M. Alper Sahiner ◽  
Parviz Ansari ◽  
Malcolm S. Carroll ◽  
C. A. King ◽  
Y. S. Suh ◽  
...  

AbstractRecently, germanium based semiconductor device technology gained renewed interest due to new developments such as the use of high-k dielectrics for high mobility Ge MOSFETS. However, a systematic local structural investigation of clustering of dopants has been lacking in the literature. In this study, we present a detailed local structural analysis of boron and phosphorus implanted Ge wafers. We have used Ge K-edge x-ray absorption fine-structure spectroscopy (XAFS) in order to probe the local structural modifications around the Ge atom under various implantation parameters and postimplantation annealing treatments. The (100) Ge wafers were implanted and with 11B+ or 31P+ using energies ranging from 20 keV to 320 keV and doses of 5×1013 to 5×1016/cm2. Pieces of the implanted wafers were subjected to thermal annealing at 400°C or 600°C for three hours in high purity nitrogen. Secondary ion mass spectrometry (SIMS) measurements on these wafers were used to correlate the dopant concentration profiles with the local structural information obtained from XAFS. B and P implanted Ge exhibit distinct responses to annealing. For the P implanted Ge samples annealing leads to recrystallization of Ge with increasing annealing temperature, but also an increase in Ge Debye-Waller factors, whereas B implanted Ge samples e×hibit recrystallization at 400°C annealing but more randomness after 600°C annealing.

2005 ◽  
Vol 891 ◽  
Author(s):  
Yong Seok Suh ◽  
Malcolm S. Carroll ◽  
Roland A. Levy ◽  
Gabriele Bisognin ◽  
Davide De Salvador ◽  
...  

ABSTRACTThe effect of increasing boron or phosphorus implant dose (i.e., 5×1013-5×1016 cm−2) and subsequent annealing (400-600°C for 3 hrs in N2) on the activation, diffusion and structure of germanium is studied in this work. The peak concentration of implant dose is ∼ 2×1021 cm−3. Secondary ion mass spectrometry (SIMS), spreading resistance profiling (SRP), high resolution X-ray diffraction (HRXRD), X-ray absorption fine structure (XAFS), Rutherford backscattering spectrometry (RBS), and nuclear reaction analysis (NRA) were used to characterize the implant and activation behavior. Boron is found to have a high solid solubility (i.e., > 2×1020 cm−3), even immediately after implant; while in contrast, phosphorus is limited to ∼ 1–2×1019 cm−3. Diffusion of phosphorus is also extremely extrinsic, while boron is practically immobile.


2016 ◽  
Author(s):  
Jian Xiao ◽  
Xinhua He ◽  
Ying Zhou ◽  
Lirong Zheng ◽  
Jialong Hao ◽  
...  

Abstract. Mineral binding is a major mechanism for soil carbon (C) stabilization. However, the submicron information about the in situ mechanisms of different fertilization practices affecting organo-mineral complexes and associated C preservation remains unclear. Here, we applied nano-scale 20 secondary ion mass spectrometry (NanoSIMS), X-ray photoelectron spectroscopy (XPS), and X-ray absorption fine structure spectroscopy (XAFS) to examine differentiating effects of inorganic versus organic fertilization on interactions between highly reactive minerals and soil C preservation. To examine such interactions, soils and their extracted colloids were collected during a 24-year long-term fertilization period (1990-2014) (no-fertilization, Control; chemical nitrogen (N), phosphorus (P) and 25 potassium (K) fertilization, NPK; and NPK plus swine manure fertilization, NPKM). The results for different fertilization conditions showed a ranked soil organic matter (SOM) concentration with NPKM > NPK > Control. Meanwhile, oxalate extracted Al (Alo), Fe (Feo), short range ordered (SRO) Al (Alxps), Fe (Fexps), and dissolved organic carbon (DOC) ranked with NPKM > Control > NPK, but ratios of DOC/Alxps and DOC/Fexps ranked with NPKM > NPK > Control. Compared with the NPK 30 treatment, NPKM treatment enhanced the C binding loadings of Al and Fe minerals in soil colloids at the submicron scale. Furthermore, a greater concentration of highly reactive Al and Fe minerals was present under NPKM than under NPK. Together, these submicron scale findings suggest that both reactive mineral species and their associations with C are differentially affected by inorganic and organic fertilization.


Author(s):  
K.K. Soni ◽  
D.B. Williams ◽  
J.M. Chabala ◽  
R. Levi-Setti ◽  
D.E. Newbury

In contrast to the inability of x-ray microanalysis to detect Li, secondary ion mass spectrometry (SIMS) generates a very strong Li+ signal. The latter’s potential was recently exploited by Williams et al. in the study of binary Al-Li alloys. The present study of Al-Li-Cu was done using the high resolution scanning ion microprobe (SIM) at the University of Chicago (UC). The UC SIM employs a 40 keV, ∼70 nm diameter Ga+ probe extracted from a liquid Ga source, which is scanned over areas smaller than 160×160 μm2 using a 512×512 raster. During this experiment, the sample was held at 2 × 10-8 torr.In the Al-Li-Cu system, two phases of major importance are T1 and T2, with nominal compositions of Al2LiCu and Al6Li3Cu respectively. In commercial alloys, T1 develops a plate-like structure with a thickness <∼2 nm and is therefore inaccessible to conventional microanalytical techniques. T2 is the equilibrium phase with apparent icosahedral symmetry and its presence is undesirable in industrial alloys.


Author(s):  
Bruno Schueler ◽  
Robert W. Odom

Time-of-flight secondary ion mass spectrometry (TOF-SIMS) provides unique capabilities for elemental and molecular compositional analysis of a wide variety of surfaces. This relatively new technique is finding increasing applications in analyses concerned with determining the chemical composition of various polymer surfaces, identifying the composition of organic and inorganic residues on surfaces and the localization of molecular or structurally significant secondary ions signals from biological tissues. TOF-SIMS analyses are typically performed under low primary ion dose (static SIMS) conditions and hence the secondary ions formed often contain significant structural information.This paper will present an overview of current TOF-SIMS instrumentation with particular emphasis on the stigmatic imaging ion microscope developed in the authors’ laboratory. This discussion will be followed by a presentation of several useful applications of the technique for the characterization of polymer surfaces and biological tissues specimens. Particular attention in these applications will focus on how the analytical problem impacts the performance requirements of the mass spectrometer and vice-versa.


Sign in / Sign up

Export Citation Format

Share Document