scholarly journals Determination of the Optimum Torque to Tighten the Smartpegs of Magnetic Resonance Frequency Analyses Devices: An Ex Vivo Study

2015 ◽  
Vol 41 (6) ◽  
pp. e252-e256 ◽  
Author(s):  
Onur Geckili ◽  
Altug Cilingir ◽  
Canan Bural ◽  
Caglar Bilmenoglu ◽  
Hakan Bilhan
Keyword(s):  
Ex Vivo ◽  
The Other ◽  
Implant Stability ◽  
Implant Stability Quotient ◽  
Magnetic Resonance Frequency ◽  
Optimal Value ◽  
Torque Values ◽  
Ex Vivo Study ◽  
Finger Pressure

The aim of this study was to find an optimal value for tightening the Smartpegs for magnetic radiofrequency analysis devices (RFAs) devices. Thirty implants were placed in 3 cow ribs. The RFA value of each implant was measured in buccal and mesial directions after tightening the Smartpegs with 1, 3, 4, 8, 9, 10, and 11 Ncm. Additionally, 4 different examiners measured the RFA after hand tightening the Smartpegs, and the results were compared. The buccal implant stability quotient (ISQ) values when the Smartpegs were tightened to 1Ncm were significantly lower than the ISQ values when the Smartpegs were tightened to 3, 4, 8, 9, 10, and 11 Ncm (P < .05). The mesial ISQ values when the Smartpegs were tightened to 1, 3, and 4 Ncm were significantly lower than the ISQ values when the Smartpegs were tightened with higher torque values (P < .05). The buccal measurements made by 1 examiner was significantly lower than 3 Ncm (P < .05), and the buccal measurements made by 1 examiner was significantly lower than 4 Ncm (P < .05). The mesial ISQ values measured by 2 examiners were significantly lower than 3 Ncm (P < .05), and the mesial ISQ values measured by the other 2 examiners were significantly lower than 8 Ncm (P < .05). The tightening of the Smartpegs should be standardized by the manufacturer to a range of 5-8 Ncm in order to gain reliable objective RFA values, instead of leaving it to subjective finger pressure.

scholarly journals Does the manual insertion torque of smartpegs affect the outcome of implant stability quotients (ISQ) during resonance frequency analysis (RFA)?

2019 ◽  
Vol 5 (1) ◽  
Author(s):  
Ingrid Kästel ◽  
Giles de Quincey ◽  
Jörg Neugebauer ◽  
Robert Sader ◽  
Peter Gehrke
Keyword(s):  
Resonance Frequency ◽  
Frequency Analysis ◽  
Insertion Torque ◽  
Resonance Frequency Analysis ◽  
Implant Stability ◽  
Reliable Determination ◽  
Torque Values ◽  
Finger Pressure

Abstract Background There is disagreement about the optimal torque for tightening smartpegs for resonance frequency analysis (RFA). Subjective finger pressure during hand tightening could affect the reliability of the resulting values. The aim of the current study was therefore to assess whether or not the insertion torque of a smartpeg magnetic device influences the implant stability quotient (ISQ) value during RFA. Methods Thirty self-tapping screw implants (XiVE S, Dentsply Sirona Implants, Bensheim, Germany) with a diameter of 3.8 mm and a length of 11 mm were inserted in three cow ribs with a bone quality of D1. The RFA value of each implant was measured (Ostell, FA W&H Dentalwerk, Bürmoos, Austria) in two orthogonal directions (mesial and buccal) after tightening the corresponding smartpeg type 45 with a mechanically defined value of 5 Ncm (Meg Torq device, Megagen, Daegu, South Korea) (test). Additionally, 4 different examiners measured the RFA after hand tightening the smartpegs, and the results were compared (control). Insertion torque values were determined by measuring the unscrew torque of hand seated smartpegs (Tohnichi Manufacturing Co. Ltd, Tokyo, Japan). Results The ISQ values varied from 2 to 11 Ncm by hand tightening and from 2 to 6 Ncm by machine tightening. The comparison of hand and machine tightening of smartpegs displayed only minor differences in the mean ISQ values with low standard deviations (mesial 79.76 ± 2,11, buccal 77.98 ± 2,) and no statistical difference (mesial p = 0,343 and buccal p = 0,890). Conclusions Manual tightening of smartpeg transducers allows for an objective and reliable determination of ISQ values during RFA.

Initial Stability Measurements of Implants Using a New Magnetic Resonance Frequency Analyzer with Titanium Transducers: An Ex Vivo Study

2020 ◽  
pp. 0000-0000 ◽  
Author(s):  
Canan Bural ◽  
Cagatay Dayan ◽  
Onur Geckili
Keyword(s):  
Resonance Frequency ◽  
Dental Implant ◽  
Ex Vivo ◽  
Resonance Frequency Analysis ◽  
Implant Stability ◽  
Clinical Measurement ◽  
Observer Reliability ◽  
Initial Stability ◽  
Magnetic Resonance Frequency ◽  
Ex Vivo Study

The establishment of stability of a dental implant is mandatory for successful osseointegration. Resonance frequency analysis (RFA) is the most frequently used method for the clinical measurement of implant stability. The purpose of the present study was to evaluate the reliability of the recently developed RF analyzer named as Penguin RFA and to compare it with the traditional RF analyzer Osstell ISQ. Sixty implants were inserted into fresh vertebrae and pelvis belonging to a steer. Implant stability was measured using Penguin RFA by its transducers (multipegs) and Osstell ISQ by its transducers (smartpegs). Additionally, stability was measured by multipegs with Osstell ISQ and by smartpegs with Penguin RFA. The intra-observer and inter-observer reliability of Penguin RFA were estimated by the intra-class coefficient (ICC). Mean implant stability quotients (ISQs) measured with Osstell ISQ were higher than the ISQs measured with Penguin RFA (P<.05). The intra- and inter-observer reliability of Penguin RFA were considered as excellent (ICC > 0.7). For Osstell ISQ, no significance in ISQs was detected between the readings by smartpegs and multipegs (P > .05) while for Penguin RFA ISQs by smartpegs were significantly higher than the ISQs by multipegs (P <.05). Recently developed Penguin RFA, is reliable and can be used in the clinical practice for the measurement of dental implant stability in regardless of the bone type. The multipegs originally manufactured for the Penguin RFA is also compatible with Osstell ISQ.

PRIMARY STABILITY IN VARIOUS-LEVELS IMPACTED IMPLANTS: AN EX-VIVO STUDY

2020 ◽  
Author(s):  
ÇAĞLAR BİLMENOĞLU BİLMENOĞLU ◽  
ANIL ÖZYURT ◽  
AHMET ALTUĞ ÇİLİNGİR ◽  
FATMA NESRİN TURAN
Keyword(s):  
Frequency Analysis ◽  
Ex Vivo ◽  
Primary Stability ◽  
Resonance Frequency Analysis ◽  
Implant Stability ◽  
Implant Stability Quotient ◽  
Group 3 ◽  
Group 2 ◽  
Ex Vivo Study ◽  
Group 1

The aim of this study was to examine the primary stabilization of different vertically impacted bone implants. Implant stability was measured by resonance frequency analysis. Forty-five dental implants were used and divided into three groups. Group 1 was placed 4 mm (1/3 impacted), Group 2 was placed 8 mm (2/3 impacted), and Group 3 was placed 12 mm (fully impacted). Implant stability quotient values were measured on the longitudinal and transversal axis by two independent researchers. The fully-impacted group showed the significantly highest value among the groups (p < 0.05). There were statistically varying implant-stability quotient values between researchers. None of the 1/3 impacted implants’ value reached a 70 implant-stability quotient value.

scholarly journals Insight into Glutamatergic Involvement in Rewarding Effects of Mephedrone in Rats: In Vivo and Ex Vivo Study

2021 ◽  
Author(s):  
Olga Wronikowska ◽  
Maria Zykubek ◽  
Agnieszka Michalak ◽  
Anna Pankowska ◽  
Paulina Kozioł ◽  
...  
Keyword(s):  
Ex Vivo ◽  
Interdisciplinary Approach ◽  
Nmda Antagonist ◽  
Exchange Chromatography ◽  
Resonance Spectroscopy ◽  
Monoamine Transporters ◽  
Ex Vivo Study ◽  
Insight Into

AbstractMephedrone is a widely used drug of abuse, exerting its effects by interacting with monoamine transporters. Although this mechanism has been widely studied heretofore, little is known about the involvement of glutamatergic transmission in mephedrone effects. In this study, we comprehensively evaluated glutamatergic involvement in rewarding effects of mephedrone using an interdisciplinary approach including (1) behavioural study on effects of memantine (non-selective NMDA antagonist) on expression of mephedrone-induced conditioned place preference (CPP) in rats; (2) evaluation of glutamate concentrations in the hippocampus of rats following 6 days of mephedrone administration, using in vivo magnetic resonance spectroscopy (MRS); and (3) determination of glutamate levels in the hippocampus of rats treated with mephedrone and subjected to MRS, using ion-exchange chromatography. In the presented research, we confirmed priorly reported mephedrone-induced rewarding effects in the CPP paradigm and showed that memantine (5 mg/kg) was able to reverse the expression of this effect. MRS study showed that subchronic mephedrone administration increased glutamate level in the hippocampus when measured in vivo 24 h (5 mg/kg, 10 mg/kg and 20 mg/kg) and 2 weeks (5 mg/kg and 20 mg/kg) after last injection. Ex vivo chromatographic analysis did not show significant changes in hippocampal glutamate concentrations; however, it showed similar results as obtained in the MRS study proving its validity. Taken together, the presented study provides new insight into glutamatergic involvement in rewarding properties of mephedrone.

Electronic determination of root canal working length in primary molar teeth: an in vivo and ex vivo study

2011 ◽  
Vol 44 (5) ◽  
pp. 402-406 ◽  
Author(s):  
A. P. C. A. Beltrame ◽  
T. C. Triches ◽  
N. Sartori ◽  
M. Bolan
Keyword(s):  
Root Canal ◽  
Ex Vivo ◽  
Primary Molar ◽  
Working Length ◽  
Molar Teeth ◽  
Ex Vivo Study

The Influence of Implant Shape on Primary Stability of Implants With a Thread Cutting and Forming Design: An Ex Vivo Study

2019 ◽  
Vol 45 (3) ◽  
pp. 181-185 ◽  
Author(s):  
Cagatay Dayan ◽  
Onur Geckili ◽  
Canan Bural
Keyword(s):  
Ex Vivo ◽  
Primary Stability ◽  
Type I ◽  
Resonance Frequency Analysis ◽  
Implant Stability ◽  
Thread Cutting ◽  
Type Iii ◽  
Experienced Clinician ◽  
Significant Difference ◽  
Ex Vivo Study

The design of an implant has a great effect on primary stability. The purpose of this study was to determine the differences in primary stability between straight and tapered Neoss ProActive implants in type I and type III bones using resonance frequency analysis (RFA) and electronic percussive testing (EPT) methods. Fresh cow vertebrae and pelvis were used as models of type III and type i bone, respectively. Implants of 2 different designs—straight and tapered Neoss ProActive implants with a thread cutting and forming (TCF) design, both 3.5-mm wide and 11-mm long—were placed in both types of bone (n = 60). The primary stability of all implants was measured by an experienced clinician blinded to the study protocol using the EPT and RFA devices. No statistically significant difference was found between the implant stability quotients and the percussive test values of straight and tapered implants in either bone type. Within the limitations of this ex vivo study, it may be concluded that the shape of an implant with a TCF design does not affect primary stability.

Role of Clinician's Experience and Implant Design on Implant Stability. An Ex Vivo Study in Artificial Soft Bones

2012 ◽  
Vol 16 (2) ◽  
pp. 166-171 ◽  
Author(s):  
Georgios E. Romanos ◽  
Abdulaziz Basha-Hijazi ◽  
Bhumija Gupta ◽  
Yan-Fang Ren ◽  
Hans Malmstrom
Keyword(s):  
Ex Vivo ◽  
Implant Design ◽  
Implant Stability ◽  
Ex Vivo Study

Relation between bone quality values from ultrasound transmission velocity and implant stability parameters - an ex vivo study

2011 ◽  
Vol 23 (8) ◽  
pp. 975-980 ◽  
Author(s):  
Vinay V. Kumar ◽  
Keyvan Sagheb ◽  
Marcus O. Klein ◽  
Bilal Al-Nawas ◽  
Peter H. Kann ◽  
...  
Keyword(s):  
Bone Quality ◽  
Ex Vivo ◽  
Implant Stability ◽  
Stability Parameters ◽  
Ex Vivo Study ◽  
Transmission Velocity
Sign in / Sign up

Export Citation Format

Share Document