Esthetic Outcomes of Immediately Loaded Locking Taper Implants in the Anterior Maxilla: A Case Series Study

2016 ◽  
Vol 42 (3) ◽  
pp. 258-264
Author(s):  
Giorgio Lombardo ◽  
Giovanni Corrocher ◽  
Jacopo Pighi ◽  
Anna Mascellaro ◽  
Mauro Marincola ◽  
...  

The purpose of this study was to evaluate the esthetic outcome of single-tooth locking taper connection implants placed in the anterior maxilla following a postextractive nonfunctional loading protocol. This preliminary clinical study involving 16 patients evaluated the results of 21 implants placed in areas with high esthetic value. For each implant the pink esthetic score, white esthetic score, cumulative survival rate, and health status of peri-implant tissues were evaluated. The cumulative survival rate was 100% 2 years after prosthetic loading, and the mean total pink esthetic score/white esthetic score was 16.9 ± 1.14 on a maximum value of 20. There was excellent plaque control in all patients, and inflammation indices were within the norm. Within the limits of this study, this immediate nonfunctional loading protocol seems to be a successful procedure esthetically and for the maintenance of peri-implant soft tissues.

Circulation ◽  
2008 ◽  
Vol 118 (suppl_18) ◽  
Author(s):  
Tetsuya Sakamoto ◽  
Yasufumi Asai ◽  
Ken Nagao ◽  
Yoshio Tahara ◽  
Takahiro Atsumi ◽  
...  

Background: In Japan, extracorporeal cardiopulmonary resuscitation (ECPR) became popular for cardiac arrest patients who resist conventional advanced life supports. Regardless of many clinical experiences, there has been no previous systematic literature review. Methods: Case series, reports and proceedings of scientific meeting about ECPR for out-of-hospital cardiac arrest written in Japanese between January 1, 1983 and July 31, 2007 were collected with Japana Centra Revuo Medicina (medical publication database in Japan) and review by experts. The outcome and characteristics of the patients were investigated, and the influence of publication bias of the case series study was also examined by the Funnel Plot method. Results: There were 951 out-of-hospital cardiac arrest patients who received ECPR in 92 reports (including 59 case series and 33 case reports) during the period. The average of age was 38.1 (4 – 88) years old and 76.1% was male. Three hundreds and eighty-one cases (40.1%) were arrests of cardiac etiology, and 212 were non-cardiac (22.3%). The cause of arrest was not described in other 37.6%. Excluding reports for only one case, weighted survival rate at discharge of 792 cases those were clearly described the outcome was 39.5±10.0%. When the relationship between the number of cases and the survival rate at discharge in each 59 case series study was shown in figure by the Funnel Plot method, the plotted data presented the reverse-funnel type that centered on the average of survival rate of all. Conclusions: The influence of publication bias of previous reports in Japan was relatively low. ECPR can greatly contribute to improve the outcome of out-of hospital cardiac arrests.


2019 ◽  
Vol 22 (1) ◽  
pp. 138-144
Author(s):  
Christiaan W. P. Pol ◽  
Gerry M. Raghoebar ◽  
Zakelina Maragkou ◽  
Marco S. Cune ◽  
Henny J. A. Meijer

2004 ◽  
Vol os11 (3) ◽  
pp. 87-89 ◽  
Author(s):  
Eleni Patsiatzi ◽  
Nick JA Grey

Purpose of study To assess the design of resin-bonded bridges (RBBs) by dentists, the quality of information provided to a dental laboratory, and aid identification of best practice. Design A retrospective case series study of slips for RBB construction, sent by hospital and general dental practitioners to a dental laboratory based in a postgraduate dental institute in Scotland, UK. Main findings 384 forms were reviewed. For single-tooth replacements, 40% of designs for upper anterior bridges and 46% for lower posterior bridges were fixed-fixed (F-F) when a cantilever design was a better option. Thirty-six (9.3%) of RBB designs involved double abutting. On the laboratory forms, fewer than five (1%) cases included instructions about the thickness of the metal framework and in 48% there was no reference to the extension of the metal framework. Principal conclusions For single-tooth replacements, a relatively high percentage of dentists prescribed a fixed-fixed design for RBBs, despite the evidence advocating the use of a cantilever design. A significant number of dentists used double abutments. The information provided to the laboratory for the construction of resin-bonded bridges was often insufficient.


2021 ◽  
Vol 10 (8) ◽  
pp. 1688
Author(s):  
Piotr Wychowański ◽  
Anna Starzyńska ◽  
Martyna Osiak ◽  
Jan Kowalski ◽  
Barbara Alicja Jereczek-Fossa ◽  
...  

The feasibility and the level of difficulty of immediate flapless implantation depend largely on the residual alveolar bone. The purpose of the study was to determine how often immediate flapless implantation in the anterior maxilla is feasible and assess the difficulty level using cone-beam computed tomography (CBCT) scans. A radiological retrospective case series study was conducted. In total, 1200 CBCT scans from 300 consecutive patients were analyzed with dedicated planning software. Immediate flapless implants were possible in 78.33% of cases. Drilling direction was either through the apex or the palatal slope. Bimodal was conducted in 9% of the cases; only through the apex in 13.08% of the cases and in 56.25% only in the slope. In 21.67%, immediate flapless implants were excluded. The feasibility and degree of difficulty differed statistically to the disadvantage of the lateral incisors compared to the central incisors. Drilling direction caused that BASE classification reflects the difficulty level of immediate implantation. CBCT is a helpful diagnostic tool for assessing the feasibility of immediate flapless implants due to the residual bone shape and volume. BASE classification helps to determine a challenge level that may also facilitate communication and result in comparison. The alveolar bone condition allows for immediate flapless implants in most cases in the aesthetic region of the maxilla, but they should be performed by an experienced specialist with regard to the bone and soft tissue quality.


2020 ◽  
Vol 2020 ◽  
pp. 1-9
Author(s):  
E. Conserva ◽  
M. Fadda ◽  
V. Ferrari ◽  
U. Consolo

In clinical daily practice, there are situations in which implant sites have vertical and/or horizontal bone defects and often we must improve their morphology and dimensions before fixture insertion. It is crucial to carefully evaluate the surgical site as regards the characteristics of both hard and soft tissues. The orthodontic extrusion technique can be used for nonsurgical augmentation of the implant site as an alternative to traditional regenerative/reparative surgical therapies. The orthodontic extrusion is based on a biological mechanism that uses the portion of periodontal ligament, still present on the root before the tooth extraction, for the increase of hard and soft tissues. In the literature, there is no evidence of common guidelines for this technique but only tips based on personal experience and/or previous studies. The aim of this study was to investigate and to validate the reliability of a new orthodontic extrusion technique (MF Extrusion Technique, by Dr. Mauro Fadda) by means of a retrospective consecutive case-series study. After we have done a review of the literature, we evaluated the X-rays of twelve consecutively treated patients before the orthodontic extrusion (T0) and after the stabilization period (T1), in order to quantify, by two different measurements, area and linear, the bone gain obtained by the application of the new technique. All the patients examined showed a significant increase in bone areas with an average value of 31.575 mm2. The linear bone gain had an average value of 4.63 mm. Data collected were statistically analysed by the Wilcoxon signed-rank test. The results obtained both from area and linear measurements at T0 and at T1 times showed that there was a statistically significant bone gain with p<0.01.


2020 ◽  
Vol 31 (3) ◽  
pp. 229-238 ◽  
Author(s):  
Alberto Sicilia‐Felechosa ◽  
Adolfo Pereira‐Fernández ◽  
Javier García‐Lareu ◽  
Julio Bernardo‐González ◽  
Pelayo Sicilia‐Blanco ◽  
...  

2020 ◽  
Vol 14 (1) ◽  
pp. 48-53
Author(s):  
Amin Saedi Germi ◽  
Vadoud Ghasemi Barghi ◽  
Karim Jafari ◽  
Rahman Nemati ◽  
Saeed Yeganzad

Background . Immediate single implant placement and restoration (IIR) is recognized as a novel method and is the main request of many patients. This study was designed to evaluate the aesthetic outcomes of immediately restored single implants placed in extraction sockets in theanterior maxilla. Methods. In this case series study, 18 patients were selected from two private clinics after placing a single-tooth implant in the anterior maxilla. Immediate provisional crowns were delivered on the following day or at most 48 hours later, and guidelines were provided. The Pink Esthetic Score (PES) questionnaire was used at 6- and 12-month follow-ups to assess aesthetic outcomes. Data were analyzed with single t-test and dependent t-test. Results. In general, the results showed that the status of the mesial papilla, distal papilla, curve of the facial soft tissue line, level of the facial peri-implant mucosa and root convexity soft tissue in IIR method were optimal (P<0.05), with total PES means of 9.44±0.783 and 8.58±1.003 after 6 and 12 months, respectively. Also, the results showed a significant difference in PES between the 6-month and 12-month intervals (P<0.05). Conclusion. IIR is a viable method that resulted in optimal aesthetic outcomes based on PES in the short term. Considering its confirmation in this study and previous studies, it is recommended that dentists apply this method.


Sign in / Sign up

Export Citation Format

Share Document