scholarly journals Genetics and expected selection gain for growth traits in Eugenia dysenterica DC. populations

Bragantia ◽  
2009 ◽  
Vol 68 (3) ◽  
pp. 629-637 ◽  
Author(s):  
Ananda Virginia de Aguiar ◽  
Roland Vencovsky ◽  
Lázaro José Chaves ◽  
Mara Fernandes Moura ◽  
Lizz Kezzy de Morais
Keyword(s):  
Genetic Variation ◽  
Genetic Parameters ◽  
Growth Traits ◽  
Block Design ◽  
Genetic Material ◽  
Germplasm Collection ◽  
Seed Orchard ◽  
Seedling Seed Orchard ◽  
Randomized Block Design ◽  
Eugenia Dysenterica

The objective of this study was to estimate genetic parameters of quantitative traits in a living germplasm collection of Eugenia dysenterica. The genetic material consisted of 110 progenies derived from 10 natural Eugenia dysenterica subpopulations sampled in the southeastern region of the state of Goiás. The experiment was established in a complete randomized block design, with 110 treatments, four replications and one tree per plot. The study variables were total height, stem diameter and respective growth rates. After the analysis of variance some genetic parameters were estimated. The levels of genetic variation in the collection were high and the highest proportion was found within subpopulations. Highest coefficients of heritability and genetic variation were observed in subpopulations from the counties Catalão, Três Ranchos, Cristalina and Senador Canedo. Considering the promising expected progress for growth traits, this collection can be converted into an unrogued seedling seed orchard, aiming the production of improved seed.

scholarly journals Adaptability, stability, productivity and genetic parameters in slash pine second-generation families in early age

2016 ◽  
Vol 65 (1) ◽  
pp. 71-82 ◽  
Author(s):  
M.K. Pagliarini ◽  
W.S. Kieras ◽  
J.P. Moreira ◽  
V.A. Sousa ◽  
J.Y. Shimizu ◽  
...  
Keyword(s):  
Genetic Variation ◽  
Genetic Parameters ◽  
Second Generation ◽  
Growth Traits ◽  
Environmental Influence ◽  
Block Design ◽  
Slash Pine ◽  
Phenotypic Traits ◽  
Early Age ◽  
Wood Volume

AbstractThe study was conducted to estimate the stability, adaptability, productivity and genetic parameters in Slash pine second-generation half-sib families, considering phenotypic traits in early age. Forty-four families from a first generation seed orchard in Colombo-PR, Brazil, were used in this study. Two progenies tests were established in a randomized complete block design. The first test was implemented in March 2009 in Ribeirão Branco, São Paulo state, containing 40 blocks, one tree per plot, 44 treatments (progenies) and 6 controls. Another test was implemented in Ponta Grossa, Paraná state, using the same experimental design and number of plants per plot, and with 24 treatments, 32 blocks. The growth traits evaluated were total height, diameter at breast height (dbh) and wood volume, within five years. The form traits evaluated were stem form, branch thickness, branch angle, number of branches, fork and fox tail five years after planting. Deviance analysis and estimates of stability, adaptability, productivity and genetic parameters were performed using the methods of best linear unbiased predictor (BLUP) and residual maximum likelihood (REML). There was significant variation among progenies for growth and form traits. Considerable genetic variation was detected mainly for wood volume. High coefficients of genetic variation and heritability showed low environmental influence on phenotypic variation, which is important for the prediction of genetic gain by selection. Crosses between different progenies individuals groups will be prioritized for obtaining heterotics genotypes and increase the probability of obtaining high specific combining ability.

scholarly journals PHYSIOLOGICAL POTENTIAL AND CONSERVATION OF MURUCI (Byrsonima crassifolia) SEEDS

2017 ◽  
Vol 39 (5) ◽  
Author(s):  
CAMILA RIBEIRO DE SOUZA GRZYBOWSKI ◽  
WALNICE MARIA OLIVEIRA DO NASCIMENTO ◽  
ROSEMEIRE CARVALHO DA SILVA ◽  
ELISA SERRA NEGRA VIEIRA ◽  
MARISTELA PANOBIANCO
Keyword(s):  
Block Design ◽  
Rapid Assessment ◽  
Germplasm Collection ◽  
Germination Test ◽  
Byrsonima Crassifolia ◽  
Randomized Block Design ◽  
Relative Air Humidity ◽  
Different Temperatures ◽  
Mother Plants ◽  
Tetrazolium Test

ABSTRACT The goal of the present study is to assess the physiological potential of Byrsonima crassifoliaseeds and analyze the procedures of the germination and tetrazolium tests, as well as the conservation of such seeds by testing different combinations of packaging and environment. The experiment used pyrenes of the clone Açu, collected from mother plants in the germplasm collection of muruci plants of Embrapa Amazonia Oriental, in Belém, Brazil. Different temperatures were tested in the germination test (25, 30, 35 and 20 - 30 ºC). The best methodology and assessment dates were determined for the test, and the seedlings of the species were characterized. Viability was assessed with the tetrazolium test, with combinations of hydration methods (by immersion and between paper towels), staining periods (3 and 4 h) and concentrations of tetrazolium solution (0.5, 0.7 and 1.0%). Storage of muruci pyrenes was evaluated at three, six and twelve months, in polyethylene and Kraft paper bags, under dry chamber and refrigerator conditions. The study used a randomized block design with four replicates. The data underwent analysis of variance. In conclusion, the physiological potential of seeds of B. crassifoliacan be assessed by the germination test conducted in sand, with alternating temperatures of 20-30 ºC, or with the use of the tetrazolium test (with staining for three hours in the tetrazolium solution at 1.0%) as a rapid assessment of viability. Muruci pyrenes can be kept in polythene or paper Kraft bags for up to 12 months, in a dry chamber at 16 ºC and with relative air humidity of 50 to 60%.

scholarly journals Genetic parameters and estimated genetic gains in young rubber tree progenies

2013 ◽  
Vol 48 (4) ◽  
pp. 411-416 ◽  
Author(s):  
Cecília Khusala Verardi ◽  
Erivaldo José Scaloppi Junior ◽  
Guilherme Augusto Peres Silva ◽  
Lígia Regina Lima Gouvêa ◽  
Paulo de Souza Gonçalves
Keyword(s):  
Genetic Gain ◽  
Genetic Parameters ◽  
Block Design ◽  
Rubber Tree ◽  
First Year ◽  
Genetic Gains ◽  
Selection Gain ◽  
Randomized Block Design ◽  
Using Data ◽  
Selection Of

The objective of this work was to assess the genetic parameters and to estimate genetic gains in young rubber tree progenies. The experiments were carried out during three years, in a randomized block design, with six replicates and ten plants per plot, in three representative Hevea crop regions of the state of São Paulo, Brazil. Twenty-two progenies were evaluated, from three to five years old, for rubber yield and annual girth growth. Genetic gain was estimated with the multi-effect index (MEI). Selection by progenies means provided greater estimated genetic gain than selection based on individuals, since heritability values of progeny means were greater than the ones of individual heritability, for both evaluated variables, in all the assessment years. The selection of the three best progenies for rubber yield provided a selection gain of 1.28 g per plant. The genetic gains estimated with MEI using data from early assessments (from 3 to 5-year-old) were generally high for annual girth growth and rubber yield. The high genetic gains for annual girth growth in the first year of assessment indicate that progenies can be selected at the beginning of the breeding program. Population effective size was consistent with the three progenies selected, showing that they were not related and that the population genetic variability is ensured. Early selection with the genetic gains estimated by MEI can be made on rubber tree progenies.

scholarly journals GGE Biplot projection in discriminating the efficiency of popcorn lines to use nitrogen

2017 ◽  
Vol 41 (1) ◽  
pp. 22-31 ◽  
Author(s):  
Adriano dos Santos ◽  
Antônio Teixeira do Amaral Júnior ◽  
Railan do Nascimento Ferreira Kurosawa ◽  
Ismael Fernando Schegoscheski Gerhardt ◽  
Roberto Fritsche Neto
Keyword(s):  
Nitrogen Availability ◽  
Block Design ◽  
Germplasm Collection ◽  
Inbred Lines ◽  
Gge Biplot ◽  
State University ◽  
Information Ratio ◽  
The North ◽  
Randomized Block Design ◽  
Main Components

ABSTRACT Nitrogen is essential for sustaining life on the planet, and it is the most important nutrient for obtaining high agricultural production. However, their use leads to the release of nitrous oxide with a global warming potential 296 times higher than the CO2 molecule, making it a challenge to reduce their use in agriculture. The objective of this research was to identify efficient popcorn inbred lines and responsive nitrogen use and exhibit a good expansion volume. For this, 29 inbred lines from the Germplasm Collection of Darcy Ribeiro North Fluminense State University (UENF) were evaluated at two contrasting levels of nitrogen availability (low and ideal) at two representative locations in the north and northwest of the state of Rio de Janeiro, Brazil, arranged in a randomized block design with three replicates. These inbred lines were discriminated against efficient use of nitrogen by multivariate GGE Biplot. Selective accuracy was close to 1, showing that the genotypes were enough to provide contrasting success in selection procedures. The first two main components (PC) retained 93.82% of the total variation, and PC1 furnished an information ratio (IR) that was unaffected by noise. L77 was the most unstable line, while P7, P2, P6, P3, P5, P4, P9, P10, P8, P9, L70, L74, and L55 were efficient and responsive. The GGE biplot method is recommended for the reliable identification of popcorn lines that are efficient and responsive to the use of nitrogen.

Genetic parameters and responses to selection for pre-weaning growth in suffolk and texel sheep

1995 ◽  
Vol 1995 ◽  
pp. 48-48
Author(s):  
I.W. Purvis ◽  
J.P. Hanrahan
Keyword(s):  
Growth Rate ◽  
Genetic Variation ◽  
Genetic Gain ◽  
Genetic Parameters ◽  
Growth Traits ◽  
Present Report ◽  
Growth Data ◽  
Genetic Trend ◽  
Breeding Objective ◽  
Selection For

In order to evaluate genetic gain in populations under selection it is necessary to be able to partition the observed response into genetic and environmental components. This requires estimates of the appropriate genetic and environmental (co)variances unless appropriate genetic controls are available. Growth rate is an important component of the breeding objective for sheep breeds used as terminal sires and, whereas older estimates of the contribution of genetic variation to differences in preweaning growth indicated heritabilities of the order of 0.1, more recent studies have indicated considerably higher values. The present report concerns analyses of preweaning growth data on purebred Suffolk and Texel sheep to estimate genetic parameters for preweaning growth traits and genetic trend in growth rate from birth to weaning.

scholarly journals Study of repeatability and phenotypical stabilization in kale using frequentist, Bayesian and bootstrap resampling approaches

2019 ◽  
Vol 41 (1) ◽  
pp. 42606
Author(s):  
Orlando Gonçalves Brito ◽  
Valter Carvalho de Andrade Júnior ◽  
Alcinei Mistico de Azevedo ◽  
Luan Mateus Silva Donato ◽  
Lidiane Rodrigues Silva ◽  
...  
Keyword(s):  
Genetic Improvement ◽  
Genetic Parameters ◽  
Block Design ◽  
Bootstrap Resampling ◽  
Average Mass ◽  
Estimated Parameters ◽  
Randomized Block Design ◽  
Number Of Leaves ◽  
Bayesian Methodologies ◽  
Selection Of

The aim of this study was to obtain information for the genetic improvement of kale through repeatability and phenotypic stabilization studies and to compare methodologies that represent the reliability of the estimated parameters. Thirty-three half-sib progenies were evaluated in a randomized block design with three replicates and six plants per plot. Eight harvests were evaluated in terms of the yield of fresh leaves, number of shoots, number of leaves and average mass of leaves. Then, a phenotypic repeatability and stabilization study was performed, estimating the genetic parameters σ2a, σ²g, σ²e, and the coefficient of environmental variation and repeatability using the frequentist and Bayesian methodologies. To evaluate the reliability of these estimates, intervals were obtained using the frequentist, Bayesian and bootstrap methods. It was verified that the reliable selection of progenies of half-sib of kale can be achieved in four harvests that were realized between 95 and 170 days after planting. It was observed that the frequentist and Bayesian methodologies are better suited to obtain reliable estimates of the genetic parameters evaluated, as the last one provided smaller amplitudes for the obtained intervals. The bootstrap methodologies are not recommended for phenotypic repeatability and stabilization studies in kale.

scholarly journals Root distribution of cactus pear genotypes under different soil water replacement levels

2021 ◽  
Vol 25 (12) ◽  
pp. 819-825
Author(s):  
Igor N. de Castro ◽  
Silvânio R. dos Santos ◽  
Marcelo R. dos Santos ◽  
Polyanna M. de Oliveira ◽  
Ignacio Aspiazú ◽  
...  
Keyword(s):  
Distribution System ◽  
Root Distribution ◽  
Root Length Density ◽  
Block Design ◽  
Genetic Material ◽  
Fertilizer Application ◽  
Root Diameter ◽  
Cactus Pear ◽  
Randomized Block Design ◽  
Water Replacement

ABSTRACT Knowledge of the cactus pear root distribution system can improve management of the plant by defining the areas of soil best suited to fertilizer application and the installation of soil moisture sensors under irrigation. Thus, the aim of the present study was to assess the root distribution of cactus pear genotypes under different water replacement levels. To that end, a field experiment was conducted in a randomized block design, using genetic material from two cactus pear genotypes (Opuntia fícus-indica Mill. and Nopalea cochenillifera Salm-Dyck) and six water replacement levels based on reference evapotranspiration - ET0 (T1, no irrigation; T2, 15%; T3, 30%; T4, 45%; T5, 60% and T6, 75% of ET0), arranged in split-plot, with irrigation treatments allocated to the plots and the genetic material to the sub-plots, and three replicates. The roots of the cultivars were collected for analysis of root length density (RLD) 390 days after planting. The RDL of very fine roots declines as depth and distance from the plant base increases and total, fine, small and medium RDL rise at higher water replacement levels; 75% of ET0 near the plant base increases RDL; all the root diameter classes are concentrated at a distance of 0-0.20 m from the plant base and depth of 0.10 to 0.25 m; the RDL percentage is higher for the Gigante genotype and Miuda exhibits better root distribution.

scholarly journals FLOWERING SYNDROME – HYBRID PERFORMANCE RELATIONSHIP IN MAIZE 1- Field traits and growth rates

2016 ◽  
Vol 47 (4) ◽  
Author(s):  
Al- Khazaali & et al.
Keyword(s):  
Grain Yield ◽  
Dry Matter ◽  
Growth Traits ◽  
Block Design ◽  
Inbred Lines ◽  
High Yield ◽  
Late Flowering ◽  
Randomized Block Design ◽  
Four Seasons ◽  
Selection For

In order to identify the role of selection for early and late silking on the inbred lines from Maize (Zea Mays L.) regarding the grain yield of the consequent hybrids. Filed experiment for four seasons (spring and full 2014 and 2015) was conducted in the experimental field of Field Crop Dept., Coll. of Agric., Univ. of Baghdad. Four inbred lines (Zm19, Zm32, Zm51 and Zm61) and two testers (Zm21 late and Zm60 early silking) were used. In the first two seasons, the seeds of the four inbred lines were planted, first 10 plants that flowered early and 10 plants that flowered late were selected and the seeds of the selected plants were multiplied. The seeds of the early and late selected inbred lines were planted in the third season and crossed with testers. Crosses from the early and late flowering were produced and their seeds were cultivated in the last season. Comparison in some field and growth traits were conducted among the crosses. The experiments laid out in completely randomized block design (RCBD) at three replicates. Selection for early and late flowering parents has induced significant differences in days to flowering for all crosses and ranged between 62 days for early parents and 66 days for late parents. Also, significant differences were shown in several traits, the most prominent were crop’s and seed’s growth rate (CGR and SGR ), that correlated with seed filling duration (SFD), which contributed to increase the deposition of the dry matter into the grain for a longer period, which gave a high grain yield (GY). CGR of outstanding crosses ranged from 3.18 to 6.21 g.m-2.day, SGR ranged between 2.3 to 7.3 g. m-2.day, and the SFD between 35-38 days. In parallel, the testers (Zm21 late and Zm60 early silking) have significantly differed in their effect on the traits of some derived crosses, where the results showed significant superiority of the crosses Zm32Zm60 resulted from crossing the tester Zm60 with early silking parents selected from inbred line Zm32 on the crosses Zm32Zm21 resulted from crossing the tester Zm21 with the same parents of Zm32 in the traits of Total Dry Matter (TDM) (1.85 kg.m-2), CGR (18.28 g.m-2.day), Harvest Index (HI) (0.56), and SGR (3.3 g.m-2.day). It can be conclude  that selection for early and late silking inbred lines, as well as the effect of the early and late silking tester have a great importance in deriving hybrids of a high yield and distinct in several traits, which are all significantly contributing in increasing the GY.

scholarly journals Genetic Parameters of Agronomic Traits in Sweetpotato Accessions

2020 ◽  
Vol 12 (2) ◽  
pp. 240-246
Author(s):  
Wiwit Rahajeng ◽  
Joko Restuono ◽  
Febria Cahya Indriani ◽  
Purwono Purwono
Keyword(s):  
Sweet Potato ◽  
Genetic Parameters ◽  
Agronomic Traits ◽  
Block Design ◽  
Germplasm Collection ◽  
Research Station ◽  
Dry Matter Content ◽  
Root Yield ◽  
Wide Range ◽  
Significant Difference

Germplasm as a source of genes in sweetpotato breeding requires information on appearance and genetic parameters. The objectives of this research were to determine the performance and genetic parameters of sweet potato accessions. The research was conducted at Kendalpayak Research Station, Malang, East Java, Indonesia. The materials used were thirty sweet potato accessions from Indonesian Legumes and Tuber Crops Research Institute (ILETRI) germplasm collection. The research was arranged in a Randomized Block Design (RBD) with two replications. The variables observed included: the vines length, the weight of vines, the number and weight of the saleable root per plot, the number and weight of the non-saleable root per plot, the number and weight of root per plant, the root yield, the harvest index, and the dry matter content. The results of ANOVA showed a significant difference among the tested genotypes in almost all traits observed except on weight of non-saleable root. PCV estimation was higher than GCV estimation for all the observed characters. The weight of the saleable root per plot, the weight of root per plant, and the root yield that showed a wide range of PCV and GCV as well as high broad-sense heritability indicated that these traits had additive gene effect and more reliable for effective selection. The broad GCV in a population is effective for selection to obtain the superior variety.

Sign in / Sign up

Export Citation Format

Share Document