scholarly journals Prediction of cottonseed longevity

2006 ◽  
Vol 41 (9) ◽  
pp. 1435-1441 ◽  
Author(s):  
Roberto Usberti ◽  
Eric Hywel Roberts ◽  
Richard Harold Ellis

The objective of this work was to determine the viability equation constants for cottonseed and to detect the occurrence and depletion of hardseededness. Three seedlots of Brazilian cultivars IAC-19 and IAC-20 were tested, using 12 moisture content levels, ranging from 2.2 to 21.7% and three storage temperatures, 40, 50 and 65ºC. Seed moisture content level was reached from the initial value (around 8.8%) either by rehydration, in a closed container, or by drying in desiccators containing silica gel, both at 20ºC. Twelve seed subsamples for each moisture content/temperature treatment were sealed in laminated aluminium-foil packets and stored in incubators at those temperatures, until complete survival curves were obtained. Seed equilibrium relative humidity was recorded. Hardseededness was detected at moisture content levels below 6% and its releasing was achieved either naturally, during storage period, or artificially through seed coat removal. The viability equation quantified the response of seed longevity to storage environment well with K E = 9.240, C W = 5.190, C H = 0.03965 and C Q = 0.000426. The lower limit estimated for application of this equation at 65ºC was 3.6% moisture content.

2016 ◽  
Vol 34 (3) ◽  
pp. 219
Author(s):  
Ari Wahyuni ◽  
M. R. Suhartanto ◽  
Abdul Qadir

<p>Soybean seed viability declines during seed storage. Soybean seed deteriorates rapidly, affected by its high protein content and often high humidity in the tropical environment. This research was aimed to develop dynamic model of soybean seed viability in an open storage. The study was conducted in three stages, namely: 1) desk study, 2) seed storage experiment, 3) development of seed storage model, simulation and verification of the model. The second stage of the experiment consisted of soybean seed storing and germination testing using completely randomized design. Treatments were three initial moisture content (7-8%, 9-10% and 11-12%) and four varieties of soybean (Anjasmoro, Wilis, Detam-1 and Detam-2). The results showed that the seed behaviour during storage period were affected by initial seed moisture content, initial viability, varieties and environmental condition. Therefore, seed moisture content, initial viability and varieties may be used as input model. Moisture content, integreting seed respiration, electric conductivity and seed storability vigor (VDSDB) were as model output. Simulation of Seed Storability Vigor Prediction Model with Model Construction Layer-Stella (MCLS) using relative humidity (RH), temperature, seed permeability, initial moisture content and initial viability as input model could logically predict the seed moisture content and seed storability vigor (VDSDB).</p>


HortScience ◽  
1995 ◽  
Vol 30 (5) ◽  
pp. 1003-1006 ◽  
Author(s):  
William J. Carpenter ◽  
Eric R. Ostmark ◽  
John A. Cornell

Various combinations of temperature and moisture contents were used in evaluating the seed storage of nine genera of annual flowers. Relative humidity (RH) levels of 11%, 32%, 52%, and 75% provided wide ranges in seed moisture during storage at 5, 15, and 25C. At each temperature, total germination percentages (G) generally declined as seed moisture content increased during storage. The seed moisture range giving the highest G after 12 months of storage was determined for each temperature and plant genus. For all genera, seed moisture contents during storage increased as storage temperatures increased at constant RH levels. Moisture contents at 25C storage were 37%, 34%, 29%, and 20% higher than at 5C when RH levels were at 11%, 32%, 52%, and 75%, respectively.


2019 ◽  
Vol 39 (2) ◽  
pp. 136
Author(s):  
Pepi Nur Susilawati ◽  
Anis Andrini ◽  
Evi Dwi Sulistya Nugroho ◽  
Ulima ‎ Darmania Amanda

Deterioration of seeds during storage may reduce the supply of high-quality seeds which become the limiting ‎factor of soybean production in tropical countries. Controlled Deterioration Test (CDT) is one of the ‎fastest vigor testing methods. The objective of this study was to achieve the suitable moisture content and ‎duration of CDT treatment in soybean seed, then establish a model that associated with the seed vigor in ‎the field after a certain time of storage. Split-plot with 2 factors, namely seed varieties and the combination of ‎moisture content and heat exposure duration were used to determine the influence of CDT treatment. ‎Another split-plot for 2 factors, namely storage period and seed varieties were used to determine the effect ‎of shelf life. Viability parameters were observed by germination strength (GS) and seedling vigor index (VI), ‎using a rolled paper towel method. The results showed that there was an interaction between soybean seed ‎varieties and the combination of seed moisture content treatment with duration of CDT exposure. Sindoro ‎and Tanggamus varieties had higher viability and storability than other varieties. Combinations of 28% seed ‎moisture content for 24 hours CDT duration were sensitive enough to evaluate the physiological potential of ‎soybean seeds, providing information that was closely related to seed germination after stored for 1 month. ‎


2001 ◽  
Vol 1 (2) ◽  
pp. 119 ◽  
Author(s):  
S.O. Nelson ◽  
S. Trabelsi ◽  
A.W. Kraszewski

2007 ◽  
Vol 47 (6) ◽  
pp. 683 ◽  
Author(s):  
Pippa J. Michael ◽  
Kathryn J. Steadman ◽  
Julie A. Plummer

Seed development was examined in Malva parviflora. The first flower opened 51 days after germination; flowers were tagged on the day that they opened and monitored for 33 days. Seeds were collected at 12 stages during this period and used to determine moisture content, germination of fresh seeds and desiccation tolerance (seeds dried to 10% moisture content followed by germination testing). Seed moisture content decreased as seeds developed, whereas fresh (max. 296 mg) and dry weight (max. 212 mg) increased to peak at 12–15 and ~21 days after flowering (DAF), respectively. Therefore, physiological maturity occurred at 21 DAF, when seed moisture content was 16–21%. Seeds were capable of germinating early in development, reaching a maximum of 63% at 9 DAF, but germination declined as development continued, presumably due to the imposition of physiological dormancy. Physical dormancy developed at or after physiological maturity, once seed moisture content declined below 20%. Seeds were able to tolerate desiccation from 18 DAF; desiccation hastened development of physical dormancy and improved germination. These results provide important information regarding M. parviflora seed development, which will ultimately improve weed control techniques aimed at preventing seed set and further additions to the seed bank.


1987 ◽  
Vol 27 (1) ◽  
pp. 179 ◽  
Author(s):  
MA Siddique ◽  
G Somerset ◽  
PB Goodwin

Trials on the cultivars Canyon and Gallatin 50 in 1978 and Cascade in 1979 were run in North Queensland to examine ways of improving seed quality of snap beans. The trials concentrated on the maturation period, since this is a critical period for the development of seed quality. We found that seed quality was poor when the crop was cut at the stage when the leaves had fallen and all the pods were dry, or if the plants were cut at any stage and allowed to dry on the ground in single rows. This poor seed quality was associated with high pod temperatures during seed maturation. Cutting the crop before leaf fall, at a seed moisture content close to 50% (20-40% of pods dry) and windrowing immediately in 5 or 10 rows to 1 windrow gave low pod temperatures during seed maturation and high seed quality. Seed harvested and threshed directly off the crop was of good quality provided the seed moisture content in the crop had fallen to less than 25%.


Sign in / Sign up

Export Citation Format

Share Document