scholarly journals Potentiometric determination of captopril in pharmaceutical formulations

2003 ◽  
Vol 28 (1) ◽  
pp. 39-44 ◽  
Author(s):  
P. R. da S. Ribeiro ◽  
A. O. Santini ◽  
H. R. Pezza ◽  
L. Pezza
Keyword(s):  
Low Cost ◽  
Standard Procedure ◽  
Pharmaceutical Preparations ◽  
Pharmaceutical Formulations ◽  
Magnesium Stearate ◽  
The United States ◽  
United States Pharmacopoeia ◽  
Glass Ph Electrode ◽  
Tablet Dosage

A simple, precise, rapid and low-cost potentiometric method for captopril determination in pure form and in pharmaceutical preparations is proposed. Captopril present in tablets containing known quantity of drug was potentiometrically titrated in aqueous solution with NaOH using a glass pH electrode, coupled to an autotitrator. No interferences were observed in the presence of common components of the tablets as lactose, microcrystalline cellulose, croscarmellose sodium, starch and magnesium stearate. The analytical results obtained by applying the proposed method compared very favorably with those obtained by the United States Pharmacopoeia Standard procedure. Recovery of captopril from various tablet dosage formulations range from 98.0 to 102.0%.

scholarly journals Spectrophotometric determination of diclofenac in pharmaceutical preparations assisted by microwave oven

2005 ◽  
Vol 30 (1) ◽  
pp. 29-36 ◽  
Author(s):  
E. G. Ciapina ◽  
A. O. Santini ◽  
P. L. Weinert ◽  
M. A. Gotardo ◽  
H. R. Pezza ◽  
...  
Keyword(s):  
Limit Of Detection ◽  
Low Cost ◽  
Standard Procedure ◽  
Pharmaceutical Preparations ◽  
Magnesium Stearate ◽  
The United States ◽  
Molar Absorptivity ◽  
Heating Time ◽  
Limit Of Quantification

In this work, an effective and low-cost method for the determination of sodium or potassium diclofenac is proposed in its pure form and in their pharmaceutical preparations. The method is based on the reaction between diclofenac and tetrachloro-p-benzoquinone (p-chloranil), in methanol medium. This reaction was accelerated by irradiating of reactional mixture with microwave energy (1100 W) during 27 seconds, producing a charge transfer complex with a maximum absorption at 535 nm. The optimal reaction conditions values such as reagent concentration, heating time and stability of the reaction product were determined. Beer's law is obeyed in a concentration range from of 1.25x10-4 to 2.00x10-3 mol l-1 with a correlation coefficient of 0.9993 and molar absorptivity of 0.49 x10³ l mol-1 cm-1. The limit of detection (LOD) was 1.35x10-5 mol l-1 and the limit of quantification (LOQ) was 4.49x10-5 mol l-1. In the presence of the common excipients, such as glucose, lactose, talc, starch, magnesium stearate, sodium sulphite, titanium dioxide, polyethyleneglycol, polyvinylpirrolidone, mannitol and benzilic alcohol no interferences were observed. The analytical results obtained by applying the proposed method compare very favorably with those given by the United States Pharmacopeia standard procedure. Recoveries of diclofenac from various pharmaceutical preparations were within 95.9% to 103.3%, with standard deviations ranging from 0.2% to 1.8%.

scholarly journals Spectrophotometric determination of methyldopa in pharmaceutical formulations

2005 ◽  
Vol 30 (3) ◽  
pp. 23-28 ◽  
Author(s):  
P. R. S. Ribeiro ◽  
L. Pezza ◽  
H. R. Pezza
Keyword(s):  
Correlation Coefficient ◽  
Spectrophotometric Method ◽  
Confidence Level ◽  
Low Cost ◽  
Pharmaceutical Preparations ◽  
Pharmaceutical Formulations ◽  
Pharmaceutical Products ◽  
Complexation Reaction ◽  
Excellent Correlation

A new, simple, precise, rapid and low-cost spectrophotometric method for methyldopa determination in pharmaceutical preparations is described. This method is based on the complexation reaction of methyldopa with molybdate. Absorbance of the resulting yellow coloured product is measured at 410 nm. Beer's Law is obeyed in a concentration range of 50 - 200 µg ml-1 methyldopa with an excellent correlation coefficient (r = 0.9999). No interference was observed from common excipients in formulations. The results show a simple, accurate, fast and readily applied method to the determination of methyldopa in pharmaceutical products. The analytical results obtained for these products by the proposed method are in agreement with those of the Brazilian Pharmacopoeia procedure at 95% confidence level.

Beyond-Use Dates Assignment for Pharmaceutical Preparations: Example of Low-Dose Amiodarone Capsules

2021 ◽  
pp. 875512252110155
Author(s):  
Damien Brun ◽  
Christophe Curti ◽  
Edouard Lamy ◽  
Christophe Jean ◽  
Pierre Bertault-Peres ◽  
...  
Keyword(s):  
Microcrystalline Cellulose ◽  
Low Dose ◽  
Pharmaceutical Preparations ◽  
The United States ◽  
Stability Study ◽  
Potential Drug ◽  
Stability Studies ◽  
United States Pharmacopoeia ◽  
Amiodarone Hydrochloride

Background: Beyond-use dates (BUDs) in compounding practice are assigned from stability studies. The United States Pharmacopoeia (USP 42 NF 37) suggested to assign a 6 months BUD for dry oral forms. A new pediatric formula of amiodarone capsules was implemented in our hospital, with 3 dosages (5 mg, 20 mg, and 50 mg). Objective: BUD of these new formulas had to be determined by stability study. Methods: The method for the determination of amiodarone content was validated to be stability indicating, and a stability study was performed. Different excipients commonly used for capsule compounding were compared. Results: We found that, with microcrystalline cellulose as excipient, 50 mg amiodarone capsules were stable for 1 year, whereas 5 mg and 20 mg capsules were not. This difference was studied, and lactose or mannitol were found to be better excipients for 5 mg amiodarone capsules, despite their potential side effects. A potential drug-excipient interaction between microcrystalline cellulose and amiodarone hydrochloride is described. Conclusion: Amiodarone hydrochloride/microcrystalline cellulose capsules have a BUD of 1 month for 5 mg capsules, 6 months for 20 mg, and 1 year for 50 mg.

Colorimetric Determination of Amoxicillin in Pure and some Pharmaceutical Formulations Via Reaction with Potassium Permanganate as Oxidant Reagent

2019 ◽  
Vol 10 (02) ◽  
Author(s):  
Abbas Shebeeb Al-kadumi ◽  
Sahar Rihan Fadhel ◽  
Mohammed Abdullah Ahmed ◽  
Luma Amer Musa
Keyword(s):  
Potassium Permanganate ◽  
Pharmaceutical Preparations ◽  
Pharmaceutical Formulations ◽  
Atomic Emission ◽  
Basic Medium ◽  
Photometric Method ◽  
Colorimetric Determination ◽  
Spectrophotometric Methods ◽  
Label Claim

We proposed two simple, rapid, and convenient spectrophotometric methods are described for the determination of Amoxicillin in bulk and its pharmaceutical preparations. They are based on the measurement of the flame atomic emission of potassium ion (in first method) and colorimetric determination of the green colored solution for manganite ion at 610 nm formed after reaction of Amoxicillin with potassium permanganate as oxidant agent (in the second method) in basic medium. The working conditions of the methods were investigated and optimized. Beer's law plot showed a good correlation in the concentration range of 5-45 μg/ml. The detection limits and relative standared deviations were (2.573, 2.814 μg/ml) (2.137, 2.498) for the flame emission photometric method and (1.844, 2.016 μg/ml) (1.645,1.932) for colorimetric methods for capsules and suspensions respectively. The methods were successfully applied to the determination of Amoxicillin in capsules and suspensions, and the obtained results were in good agreement with the label claim. No interference was observed from the commonly encountered additives and expectancies.

Development and Validation of an Eco-Friendly and Low-Cost Method for the Quantification of Cefepime Hydrochloride in Powder for Injectable Solution Using Infrared (IR) Spectroscopy

2020 ◽  
Vol 16 (4) ◽  
pp. 456-464
Author(s):  
Danilo F. Rodrigues ◽  
Hérida R.N. Salgado
Keyword(s):  
Ir Spectroscopy ◽  
Low Cost ◽  
Pharmaceutical Preparations ◽  
Potassium Bromide ◽  
Pharmaceutical Products ◽  
Injectable Formulation ◽  
Ich Guidelines ◽  
Lactam Ring ◽  
Development And Validation

Background: A simple, eco-friendly and low-cost Infrared (IR) method was developed and validated for the analysis of Cefepime Hydrochloride (CEF) in injectable formulation. Different from some other methods, which employ organic solvents in the analyses, this technique does not use these types of solvents, removing large impacts on the environment and risks to operators. Objective: This study aimed at developing and validating a green analytical method using IR spectroscopy for the determination of CEF in pharmaceutical preparations. Methods: The method was validated according to ICH guidelines and the quantification of CEF was performed in the spectral region absorbed at 1815-1745 cm-1 (stretching of the carbonyl group of β- lactam ring). Results: The validated method showed to be linear (r = 0.9999) in the range of 0.2 to 0.6 mg/pellet of potassium bromide, as well as for the parameters of selectivity, precision, accuracy, robustness and Limits of Detection (LOD) and Quantification (LOQ), being able to quantify the CEF in pharmaceutical preparations. The CEF content obtained by the IR method was 103.86%. Conclusion: Thus, the method developed may be an alternative in the quality control of CEF sample in lyophilized powder for injectable solution, as it presented important characteristics in the determination of the pharmaceutical products, with low analysis time and a decrease in the generation of toxic wastes to the environment.

Analytical Methods for the Determination of Sartans in Pharmaceutical Formulations and Biological Fluids: A Review

2020 ◽  
Vol 16 (3) ◽  
pp. 208-222
Author(s):  
Miglena Smerikarova ◽  
Stanislav Bozhanov ◽  
Vania Maslarska
Keyword(s):  
Biological Fluids ◽  
Pharmaceutical Preparations ◽  
Improve Patient Care ◽  
Pharmaceutical Formulations ◽  
Treatment Of Hypertension ◽  
Therapeutic Doses ◽  
Reliable Methods ◽  
Improve Patient

Background: Sartans are mostly used as a part of combination with additional medicines in the therapy of essencial hypertension. Preferred combinations are ARB and thiazide diuretics (Hydrochlorothiazide (HCT) and Chlorthalidone (CHL)) or ARB and calcium antagonists. The number of sartans mostly prescribed by specialists is only seven - Candesartan (CDS), Eprosartan (EPS), Irbesartan (IBS), Losartan (LOS), Olmesartan (OMS), Telmisartan (TMS) and Valsartan (VLS). Methods: The widespread use of sartans in the treatment of hypertension requires reliable methods of analysis. Bulk drugs and pharmaceutical preparations should be analyzed to ensure the quality of the medicinal products reaching patients. On the other hand, the analysis of drugs in biological fluids aims to trace and improve patient care by adjusting the therapeutic doses of drugs. According to our knowledge, a review devoted to the analysis of sartans was published in 2014. Results: Spectral methods are widely used in the analysis of bulk drugs and pharmaceutical dosage forms due to their relatively simple procedures, low reagent and sample consumption, speed, precision and accuracy combined with accessibility and comparatively low cost of common apparatus. Many papers for determination of sartans in bulk drugs and pharmaceutical preparations based on liquid chromatographic techniques were published in the available literature. Among these methods, HPLC takes the leading place but UPLC and HPTLC are also present. Conclusion: The widespread use of sartans in the treatment of hypertension requires reliable methods of analysis. Bulk drugs and pharmaceutical preparations should be analyzed to ensure the quality of the medicinal products reaching patients. On the other hand, the analysis of drugs in biological fluids aims to trace and improve patient care by adjusting the therapeutic doses of drugs. Since 2014, many articles have been published on the sartans analysis and this provoked our interest to summarize the latest applications in the analysis of sartans in pharmaceutical formulations and biological media. Articles published from 2014 to 2018 are covered.

scholarly journals Applicability of Cork as Novel Modifiers to Develop Electrochemical Sensor for Caffeine Determination

Materials ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 37
Author(s):  
Mayra K. S. Monteiro ◽  
Djalma R. Da Silva ◽  
Marco A. Quiroz ◽  
Vítor J. P. Vilar ◽  
Carlos A. Martínez-Huitle ◽  
...  
Keyword(s):  
Electrochemical Sensor ◽  
Linear Response ◽  
High Performance ◽  
Low Cost ◽  
Pharmaceutical Formulations ◽  
Caffeine Concentration ◽  
Real Samples ◽  
Wide Range ◽  
Potential Use

This study aims to investigate the applicability of a hybrid electrochemical sensor composed of cork and graphite (Gr) for detecting caffeine in aqueous solutions. Raw cork (RAC) and regranulated cork (RGC, obtained by thermal treatment of RAC with steam at 380 °C) were tested as modifiers. The results clearly showed that the cork-graphite sensors, GrRAC and GrRGC, exhibited a linear response over a wide range of caffeine concentration (5–1000 µM), with R2 of 0.99 and 0.98, respectively. The limits of detection (LOD), estimated at 2.9 and 6.1 µM for GrRAC and GrRGC, suggest greater sensitivity and reproducibility than the unmodified conventional graphite sensor. The low-cost cork-graphite sensors were successfully applied in the determination of caffeine in soft drinks and pharmaceutical formulations, presenting well-defined current signals when analyzing real samples. When comparing electrochemical determinations and high performance liquid chromatography measurements, no significant differences were observed (mean accuracy 3.0%), highlighting the potential use of these sensors to determine caffeine in different samples.

scholarly journals New Diazo Coupling Reactions for Visible Spectrophotometric Determination of Alfuzosin in Pharmaceutical Preparations

2007 ◽  
Vol 4 (4) ◽  
pp. 496-501 ◽  
Author(s):  
M. Vamsi Krishna ◽  
D. Gowri Sankar
Keyword(s):  
Pharmaceutical Preparations ◽  
Pharmaceutical Formulations ◽  
Molar Absorptivity ◽  
Basic Medium ◽  
Coupling Reactions ◽  
Acetyl Acetone ◽  
Diazo Coupling ◽  
Optimum Reaction ◽  
Diazonium Ion

Simple, rapid and sensitive spectrophotometric procedures were developed for the analysis of Alfuzosin hydrochloride (AFZ) in pure form as well as in pharmaceutical formulations. The methods are based on the reaction of AFZ with nitrite in acid medium to form diazonium ion, which is coupled with ethoxyethylenemaleic ester (Method A) or ethylcyanoacetate (Method B) or acetyl acetone (method C) in basic medium to form azo dyes, showing absorption maxima at 440, 465 and 490 nm respectively. Beer’s law is obeyed in the concentration of 4-20 μg/mL of AFZ for methods A, B and 3-15 μg/mL of AFZ for method C. The molar absorptivity and sandell’s sensitivity of AFZ- ethoxyethylenemaleic ester, AFZ- ethylcyanoacetate and AFZ-acetyl acetone are1.90 × 104, 0.022; 1.93 × 104, 0.021 and 2.67 × 104L mole-1cm-1, 0.015 μg cm-2respectively. The optimum reaction conditions and other analytical parameters were evaluated. The methods were successfully applied to the determination of AFZ in pharmaceutical formulations.

scholarly journals DETERMINATION OF BTEX IN ENVIRONMENTAL SAMPLES: DEVELOPMENT AND PROTECTION OF TECHNOLOGIES AND ANALYTICAL METHODS

2019 ◽  
Vol 16 (31) ◽  
pp. 431-439
Author(s):  
Helilma de Andréa PINHEIRO ◽  
Ana Paula Mota FERREIRA ◽  
Ismael Carlos Braga ALVES ◽  
Antônio Fernandes SANTOS JÚNIOR ◽  
Raquel Bezerra dos Santos SAWCZUK ◽  
...  
Keyword(s):  
Petroleum Hydrocarbons ◽  
Environmental Samples ◽  
Low Cost ◽  
The United States ◽  
Operational Control ◽  
Toxic Compounds ◽  
Chromatographic Techniques ◽  
Benzene Toluene ◽  
And Storage

The contamination of water and soil by petroleum hydrocarbons is reported quite frequently, mainly due to accidents involving transport and storage of fuels. Among the most toxic compounds the most volatile benzene, toluene, ethylbenzene and xylene (BTEX). Residues of these compounds can cause serious environmental and public health troubles. Thus, more sensitive, selective and low-cost techniques, focused on the analysis and monitoring of these contaminants are being developed in order to establish operational control and to comply with local laws, but the intellectual property of such technologies is still unknown. The present study shows the panorama about patents, thesis and dissertations which have been already published on this theme. Together, the United States and China hold the largest number of patents, and most of thesis/dissertations describe methodologies for BTEX detection in water, although numerous environmental problems caused by oils in the soil had been reported. Also, the methods based on chromatographic techniques stand out in relation to the other techniques. It was possible to verify important advances in the field of sensors, especially the electrochemical ones, in order to solve the analytical gaps.

scholarly journals Spectrophotometric determination of nicradipine and isradipine in pharmaceutical formulations

2009 ◽  
Vol 15 (2) ◽  
pp. 69-76 ◽  
Author(s):  
S.M. Al-Ghannam ◽  
A.M. Al-Olyan
Keyword(s):  
Standard Deviation ◽  
Detection Limit ◽  
Reaction Pathway ◽  
Pharmaceutical Preparations ◽  
Pharmaceutical Formulations ◽  
Molar Absorptivity ◽  
Zinc Powder ◽  
Conditional Stability ◽  
Conditional Stability Constant

A sensitive spectrophotometric method was developed for the determination of some 1,4-dihydropyridine compounds namely, nicardipine and isradipine either in pure form or in pharmaceutical preparations. The method is based on the reduction of nicardipine and isradipine with zinc powder and calcium chloride followed by further reduction with sodium pentacyanoaminoferrate (II) to give violet and red products having the absorbance maximum at 546 and 539 nm with nicardipine and isradipine, respectively. Beer's law was obeyed over the concentration range 8.0-180 ?g/ml with the detection limit of 1.67 ?g/ml for nicardipine and 8.0-110 ?g/ml with the detection limit of 1.748 ?g/ml for isradipine. The analytical parameters and their effects on the reported methods were investigated. The molar absorptivity, quantization limit, standard deviation of intercept (Sa), standard deviation of slope (Sb) and standard deviation of the residuals (Sy/x) were calculated. The composition of the result compounds were found 1:1 for nicardipine and 1:2 for isradipine by Job's method and the conditional stability constant (Kf) and the free energy changes (?G) were calculated for compounds formed. The proposed method was applied successfully for the determination of nicardipine and isradipine in their dosage forms. The results obtained were in good agreement with those obtained using the reference or official methods. A proposal of the reaction pathway was presented.

Sign in / Sign up

Export Citation Format

Share Document