scholarly journals Corn and soybean yields as affected by cover crops and herbicide timing under no-tillage system

2013 ◽  
Vol 31 (4) ◽  
pp. 939-946
Author(s):  
P. Oliveira ◽  
A.S. Nascente ◽  
J. Kluthcouski ◽  
T.A.P. Castro
Keyword(s):  
Grain Yield ◽  
Common Bean ◽  
Cover Crops ◽  
Cover Crop ◽  
Block Design ◽  
No Tillage ◽  
Brachiaria Brizantha ◽  
Grain Yields ◽  
Randomized Block Design ◽  
Tillage System

To achieve better results in the no-tillage system (NTS), it is important to properly manage the cover crop prior to planting by using herbicides, usually glyphosate. The effect of glyphosate on plant coverage is slow, and plants take a few days to die completely. Thus, when applying the herbicide on the same day of planting soybean or corn, cover crops are still alive and standing, causing initial shading on seedlings of the crop and delaying its establishment. Therefore, this study aimed to evaluate the effect of distinct cover crops and their timing of desiccation prior to planting soybean or corn, on crop yield and yield components. Two experiments were installed, one for soybean and another for corn. Each experiment consisted in combining three cover crops (Brachiaria brizantha, common bean or millet) chemically desiccated at two timings before planting the crop (15 or 0 days before planting) under no-tillage system (NTS). Experiments were installed in a completely randomized block design with five replications. Brachiaria brizantha produced the highest amount of biomass; common bean and millet as cover crops allowed higher soybean grain yields; herbicide application under common bean, millet and Brachiaria brizantha 15 days before planting soybean allowed higher crop grain yields; desiccation timing of common bean did not affect corn grain yield; Brachiaria brizantha should be desiccated 15 days before planting corn to allow maximum grain yield; when millet was used as a cover crop, glyphosate application at planting of corn allowed the highest grain yield.

scholarly journals Effect of water regimes and plant densities on cowpea production1

2017 ◽  
Vol 47 (4) ◽  
pp. 432-439 ◽  
Author(s):  
Marinete Martins de Sousa Monteiro ◽  
Edson Alves Bastos ◽  
Milton José Cardoso ◽  
Aderson Soares de Andrade Júnior ◽  
Valdenir Queiroz Ribeiro
Keyword(s):  
Grain Yield ◽  
Water Depth ◽  
Plant Density ◽  
Block Design ◽  
No Tillage ◽  
Grain Yields ◽  
Water Regimes ◽  
Randomized Block Design ◽  
Plant Densities ◽  
Tillage System

ABSTRACT Cowpea has been cultivated in a rudimentary form in the main producing regions of Brazil, resulting in lower grain yields, when compared to the crop potential. The use of technologies such as water regimes, adequate plant density and soil management are alternatives to increase this crop yield. This study aimed at evaluating the effects of different water regimes and plant densities on the yield components of cowpea cultivated under conventional and no-tillage systems. A randomized block design in a split-plot factorial, with four replications, was used. The treatments consisted of five water regimes in the plots (157.00 mm, 189.00 mm, 234.00 mm, 274.00 mm and 320.00 mm) and five plant densities as subplots (12 plants m-2, 16 plants m-2, 20 plants m-2, 24 plants m-2 and 28 plants m-2). The evaluated variables were: number of pods per plant, number of pods per area, pod length and grain yield. The combination between 270 mm of irrigation water depth with a density of 280,000 plants ha-1 resulted in higher grain yield using the no-tillage system, while the combination between the density of 280,000 plants ha-1 and 320 mm of water depth favored the highest grain yields in the conventional growing system.

scholarly journals Molybdenum mixed with glyphosate and alone via foliar spray in no-tillage common bean grown on corn stover

Revista CERES ◽  
2014 ◽  
Vol 61 (1) ◽  
pp. 62-69
Author(s):  
Gessimar Nunes Camelo ◽  
Geraldo Antonio de Andrade Araújo ◽  
Renildes Lucio Ferreira Fontes ◽  
Luiz Antonio dos Santos Dias ◽  
José Eustáquio de Souza Carneiro ◽  
...  
Keyword(s):  
Common Bean ◽  
Corn Stover ◽  
Field Experiments ◽  
Block Design ◽  
Foliar Spray ◽  
Cumulative Effect ◽  
No Tillage ◽  
Randomized Block Design ◽  
Tillage System ◽  
Mo Content

The effect of molybdenum (Mo) on common bean grown in desiccated corn stover in a no-tillage system was evaluated under two application modes: Mo mixed with the desiccant glyphosate and Mo direct spray to the bean leaves. The treatments (four replicates) were assigned to a completely randomized block design in a split-plot arrangement with the application of Mo (0, 100, 200, 400 and 800 g ha-1) mixed with glyphosate in the main plots and Mo foliar spray (0 and 100 g ha-1) in the sub-plots. The field experiments were carried out in 2009 and 2010 in the municipality of Coimbra, Minas Gerais State, with the common bean cultivar Ouro Vermelho. Mo mixed with glyphosate had neither an effect on common bean yield nor on the Mo and N contents in leaves, however it increased the Mo and N contents in seeds. Application of Mo via foliar spray increased Mo content in leaves and Mo and N contents in seeds. The reapplication of molybdenum with glyphosate for desiccation in subsequent crops caused a cumulative effect of Mo content in bean seeds.

scholarly journals Adubação fosfatada no feijoeiro cultivado sob palhada de Brachiaria brizantha cv. Marandu

Revista CERES ◽  
2018 ◽  
Vol 65 (2) ◽  
pp. 181-188
Author(s):  
João Vitor de Souza Silva ◽  
Simério Carlos Silva Cruz ◽  
Alessandra Mayumi Tokura Alovisi ◽  
Carlos Hissao Kurihara ◽  
Warless Domingos Xavier ◽  
...  
Keyword(s):  
Grain Yield ◽  
Cover Crop ◽  
Block Design ◽  
Phosphate Fertilizer ◽  
Phosphorus Fractionation ◽  
Phosphorus Fertilization ◽  
Brachiaria Brizantha ◽  
Randomized Block Design ◽  
Labile P ◽  
Management Alternatives

ABSTRACT The application of phosphate fertilizer is indispensable for the achievement of sustainable bean production, and P is necessary practically in the entire cycle. Thus, cultural management alternatives have been used in the best use of this nutrient, among them the use of Brachiaria as cover crop. The objective of this research was to evaluate the dynamics of phosphorus in the soil with and without the presence of Brachiaria brizantha cv. Marandú as cover crop, and the bean response to phosphorus fertilization. We used a randomized block design with a split plot arrangement; the plots were composed of P2O5 doses (0, 50, 100, 200, and 400 kg ha-1) via triple superphosphate; and the subplots were composed of the presence and absence of Brachiaria as previous cover crop cultivation of beans. Soil samples were taken at 15 and 30 days after sowing (DAS) bean. In the samples, phosphorus fractionation in soil was carried out by the Hedley technique. Phosphorus content was evaluated in the leaf and grain yield of bean plants. The phosphorus fertilization and cultivation of Brachiaria brizantha cv. Marandú as cover crop provided changes in the levels of labile P of soil at 15 and 30 DAS bean, and labile P of soil only at 15 DAS bean. The presence of B. brizantha cv. Marandú as cover crop increases the P content in the bean leaf with consequent grain yield gain of 18%.

scholarly journals Effect of phosphorus applied as monoammonium phosphate-coated polymers in corn culture under no-tillage system

2018 ◽  
Vol 39 (1) ◽  
pp. 99
Author(s):  
Ana Carolina Marostica Lino ◽  
Salatiér Buzetti ◽  
Marcelo Carvalho Minhoto Teixeira Filho ◽  
Fernando Shintate Galindo ◽  
Paulo Ricardo Maestrelo ◽  
...  
Keyword(s):  
Grain Yield ◽  
Block Design ◽  
Quadratic Function ◽  
Leaf Tissue ◽  
No Tillage ◽  
Monoammonium Phosphate ◽  
Randomized Block Design ◽  
Tillage System ◽  
Essential Nutrient ◽  
Cropping Seasons

The use of phosphate fertilizers as coated polymers reduces phosphorus losses that occur by adsorption of P to soil particles, thereby providing this essential nutrient for a longer period. The objective of this study was to evaluate the effect of phosphorus doses applied as conventional monoammonium phosphate or as coated polymers on corn grown in a clayey Oxisol, in the Cerrado region. The experiment was conducted in Selvíria - MS, located at 22°22? S and 51°22? W. The experiment was laid out in a randomized block design arranged as a 4 × 2 factorial, with four doses of P2O5 (0, 50, 100, and 150 kg ha-1) and two sources of phosphorus (monoammonium phosphate (MAP) and monoammonium phosphate coated polymers). The experiment was conducted under no-tillage system during the cropping seasons in 2008/09 and 2009/10. The MAP and MAP-coated sources did not differ in most of the yield components in either of the two seasons. We found a quadratic function adjustment for P doses up to 117 and 98 kg ha-1 of P2O5 for P concentration in leaf tissue and grain yield in the 2008/2009 crop, respectively. We also obtained a quadratic function adjustment for P rates for grain yield and number of plants, up to 118 and 113 kg ha-1 of P2O5, respectively, in the 2009/2010 harvest.

scholarly journals Cover crops and residual effect of lime and gypsum on soil subsurface physical attributes

2020 ◽  
Vol 9 (6) ◽  
pp. e143963490
Author(s):  
Marcela Pacola Oliveira ◽  
Cassiano Garcia Roque ◽  
Gabriel Luiz Piati ◽  
Othon Lauar Godinho ◽  
Paulo Eduardo Teodoro
Keyword(s):  
Cover Crops ◽  
Pennisetum Glaucum ◽  
Block Design ◽  
Residual Effect ◽  
Total Porosity ◽  
No Tillage ◽  
Mato Grosso ◽  
Randomized Block Design ◽  
Tillage System ◽  
Physical Attributes

The use of lime, gypsum, and different cover crops may influence the soil physical attributes, the formation of soil coverage before the crop implantation is crucial for the consolidation of the No-Tillage System. This work aimed to evaluate the alterations in the subsoil physical attributes, influenced by different cover crops combined with the application of lime and gypsum, in a no-tillage system in the Cerrado region, the soil of the experiment area was classified as Dystrophic Red Latosol. The experiment was carried out in Chapadão do Sul, state of Mato Grosso do Sul, Brazil, in a complete randomized block design, in a split-plot scheme. Plots consisted of cover crops (Urochloa ruziziensis and Pennisetum glaucum) and fallow; the subplots were formed by gypsum rates (0, 2.3, and 4.6 Mg ha-1); and the sub-sub-plots consisted of lime rates (0, 2, 4, and 6 Mg ha-1), with three replications. The cover crops, Uruchloa ruziziensis, Pennisetum glaucum and the rates of limestone and gypsum do not interfere with the density of the soil. The Uruchloa ruziziensis cover crop provides increased microporosity and total soil porosity. The cover crops Uruchloa ruziziensis and Pennisetum glaucum were not efficient in decompressing the soil in the layers of 0.20 - 0.30 and 0.30 - 0.40 m in depth. The residual effect of the lime rate of 2 Mg ha-1 without gypsum application provided higher total porosity the 0.30 - 0.40 m layer.

scholarly journals Crop systems and topdressing nitrogen on grain yield and technological attributes of common bean under no-tillage

2019 ◽  
Vol 49 ◽  
Author(s):  
Fábio Luíz Checchio Mingotte ◽  
Leandro Borges Lemos ◽  
Celso Antônio Jardim ◽  
Domingos Fornasieri Filho
Keyword(s):  
Grain Yield ◽  
Common Bean ◽  
Cropping Systems ◽  
Block Design ◽  
No Tillage ◽  
Brazilian Savannah ◽  
Sole Crop ◽  
Randomized Block Design ◽  
N Rates ◽  
Nitrogen Rates

ABSTRACT Common bean has been the main crop in succession to corn and Brachiaria in no-tillage systems, in the Brazilian Savannah. This study aimed to evaluate the influence of crop systems and topdressing nitrogen on grain yield and technological attributes of common bean under no-tillage. A randomized block design, in a split-plot arrangement, with four replications, was used. The plots consisted of three crop systems (corn in sole crop, corn + Urochloa ruziziensis intercropped and U. ruziziensis in sole crop) and the subplots by five nitrogen rates (0 kg ha-1, 40 kg ha-1, 80 kg ha-1, 120 kg ha-1 and 160 kg ha-1). There is interaction between predecessor cropping systems and N rates for grain yield, milling efficiency specifically on sieve 13, as well as for the grain hydration ratio. Increasing topdressing N rates applied on common bean in succession to corn in sole crop promote increases in grain yield, resulting in a milling efficiency in the oblong-hole sieve 14 higher than in the other crop systems evaluated. The increase of the topdressing N rates applied on common bean in succession to corn and U. ruziziensis in sole crops or intercropped does not influence the time for maximum hydration of the grains, but reduces their cooking time, mainly in succession to U. ruziziensis and corn in sole crops.

scholarly journals Technical and economic viability of co-inoculation with Azospirillum brasilense in soybean cultivars in the Cerrado

2018 ◽  
Vol 22 (1) ◽  
pp. 51-56 ◽  
Author(s):  
Fernando S. Galindo ◽  
Marcelo C. M. Teixeira Filho ◽  
Salatier Buzetti ◽  
Mariana G. Z. Ludkiewicz ◽  
Poliana A. L. Rosa ◽  
...  
Keyword(s):  
Nitrogen Fixation ◽  
Grain Yield ◽  
Biological Nitrogen Fixation ◽  
Azospirillum Brasilense ◽  
Block Design ◽  
Economic Viability ◽  
No Tillage ◽  
Randomized Block Design ◽  
Tillage System ◽  
Biological Nitrogen

ABSTRACT Biological nitrogen fixation (BNF) efficiency can be increased by co-inoculation with bradyrhizobia and Azospirillum brasilense, allowing even greater uptake of water and nutrients, leading to higher yields. Thus, this study aimed to evaluate the technical and economic viability of soybean in the Cerrado, according to the cultivars and co-inoculation with Azospirillum brasilense. The experiment was conducted in Selvíria, MS, in no-tillage system, in Oxisol, arranged in a randomized block design in a 2 x 2 factorial scheme with two cultivars (‘Potência’ and ‘Valiosa’), with and without co-inoculation with Azospirillum brasilense in the seed. Co-inoculation with A. brasilense increases grain yield in the cultivars ‘Potência’ and ‘Valiosa’, being economically viable. However, using the cultivar ‘Potência’ co-inoculated led to the highest profitability.

scholarly journals Green and sweet corn grown under different cover crops and phases of the no-tillage system

2022 ◽  
Vol 26 (3) ◽  
pp. 173-179
Author(s):  
Diemisson O. Nunes ◽  
João H. de S. Favaro ◽  
Hamilton C. de O. Charlo ◽  
Arcângelo Loss ◽  
Antônio C. Barreto ◽  
...  
Keyword(s):  
Cover Crops ◽  
Dry Matter ◽  
Sweet Corn ◽  
Block Design ◽  
Dry Mass ◽  
Agronomic Performance ◽  
No Tillage ◽  
Randomized Block Design ◽  
Sunn Hemp ◽  
Tillage System

ABSTRACT Special corn is cultivated all year conventionally round; however, its productivity increases when grown under a no-tillage system (NTS). This study aimed to evaluate the agronomic performance of sweet and green corn cultivated under residues of different cover crops and the NTS implantation stages. Two experiments were carried out in the randomized block design, with four replications, in each of the three areas. The experiments consisted of evaluating the sweet and green corn, simultaneously, in three areas at different stages of development of NTS: initial (1 year), transition (7 years), and consolidation (19 years) with six types of cover crops: Signal grass (SG), Pearl millet (PM), Sunn hemp (SH), a mixture of SG + SH, SG + PM, and PM + SH. The dry matter (DM) production of the cover crops, the productivity of husked and unhusked ears, straw, and grain yield were evaluated. The SH had the highest dry mass production among the studied cover crops in all phases of the NTS. The phase of the NTS did not influence the productivity of ears with or without husk in green corn. The cultivation of sweet corn in transition and consolidation areas of the NTS showed better yields when compared to the initial phase of the system.

scholarly journals Phytomass and nutrient release in soybean cultivation systems under no-tillage

2018 ◽  
Vol 53 (10) ◽  
pp. 1119-1131 ◽  
Author(s):  
Andressa Selestina Dalla Côrt São Miguel ◽  
Leandro Pereira Pacheco ◽  
Ícaro Camargo de Carvalho ◽  
Edicarlos Damacena de Souza ◽  
Priscilla Barros Feitosa ◽  
...  
Keyword(s):  
Nutrient Cycling ◽  
Grain Yield ◽  
Cover Crops ◽  
Soil Cover ◽  
Block Design ◽  
Nutrient Release ◽  
No Tillage ◽  
Mato Grosso ◽  
Cultivation Systems ◽  
Tillage System

Abstract: The objective of this work was to evaluate the effect of phytomass accumulation, soil cover, and nutrient cycling promoted by cultivation systems with annual and cover crops on the grain yield of soybean sown in succession in the Cerrado, in the state of Mato Grosso, Brazil. The experiment was carried out in a randomized complete block design with nine cultivation systems and four replicates, in two crop seasons. In 2014/2015, forage grasses and legumes were evaluated, besides fallow treatments. In 2015/2016, forage and legume intercropped or not with corn or sunflower and fallow were assessed; the soybean crop was evaluated following cover crops. Phytomass, soil cover, and nutrient cycling provided by cultivation systems, as well as soybean mass and yield, were determined. Urochloa ruziziensis alone or intercropped, compared with the fallow systems, promotes significant increases in phytomass production, soil cover and nutrient cycling, with an increase in the grain yield of soybean planted in succession. N and K are the most accumulated nutrients in the aerial part of the cover crops and are released in larger quantities in the soil in the two years of evaluation. Crotalaria spectabilis promotes an increase in soybean yield in the 2015/2016 crop season, compared with U. ruziziensis, due to the synchronism between N release and uptake under no-tillage system.

scholarly journals Technical and Economic Viability of Wheat with Forms of Application and Doses of Boron

2018 ◽  
Vol 10 (4) ◽  
pp. 306 ◽  
Author(s):  
Fernando S. Galindo ◽  
Marcelo C. M. Teixeira Filho ◽  
Salatiér Buzetti ◽  
Eduardo H. M. Boleta ◽  
Willian L. Rodrigues ◽  
...  
Keyword(s):  
Experimental Design ◽  
Block Design ◽  
Leaf Tissue ◽  
Economic Viability ◽  
No Tillage ◽  
Wheat Grain ◽  
Economic Return ◽  
Randomized Block Design ◽  
Tillage System ◽  
Irrigated Wheat

Boron is one of the most limiting micronutrients in grains production system in Brazil. In this way, the objective was to evaluate the effect of forms of application and doses of boron in irrigated wheat grain yield evaluating the economic terms in Cerrado region. The experiment was conducted in no-tillage system in an Oxisol with clay texture in Selvíria, MS, Brazil. The experimental design was a randomized block design with four replicates, arranged in a 4 × 3 factorial scheme: four doses of boron (0, 1, 2 and 4 kg ha-1) with boric acid source (B = 17%); and three apllication forms: a) in desiccation of the predecessor straw, together with herbicide; b) at the time of sowing, in soil along with the formulated fertilization seeding and c) via leaf tissue with the application of post emergent herbicide. The application of 2 kg ha-1 provides greater grain yields, but the highest economic return was obtained at the dose of 1 kg ha-1, with application in soil, ensuring profitability from production of irrigated wheat in the Cerrado.

Sign in / Sign up

Export Citation Format

Share Document