scholarly journals Technical and economic viability of co-inoculation with Azospirillum brasilense in soybean cultivars in the Cerrado

2018 ◽  
Vol 22 (1) ◽  
pp. 51-56 ◽  
Author(s):  
Fernando S. Galindo ◽  
Marcelo C. M. Teixeira Filho ◽  
Salatier Buzetti ◽  
Mariana G. Z. Ludkiewicz ◽  
Poliana A. L. Rosa ◽  
...  
Keyword(s):  
Nitrogen Fixation ◽  
Grain Yield ◽  
Biological Nitrogen Fixation ◽  
Azospirillum Brasilense ◽  
Block Design ◽  
Economic Viability ◽  
No Tillage ◽  
Randomized Block Design ◽  
Tillage System ◽  
Biological Nitrogen

ABSTRACT Biological nitrogen fixation (BNF) efficiency can be increased by co-inoculation with bradyrhizobia and Azospirillum brasilense, allowing even greater uptake of water and nutrients, leading to higher yields. Thus, this study aimed to evaluate the technical and economic viability of soybean in the Cerrado, according to the cultivars and co-inoculation with Azospirillum brasilense. The experiment was conducted in Selvíria, MS, in no-tillage system, in Oxisol, arranged in a randomized block design in a 2 x 2 factorial scheme with two cultivars (‘Potência’ and ‘Valiosa’), with and without co-inoculation with Azospirillum brasilense in the seed. Co-inoculation with A. brasilense increases grain yield in the cultivars ‘Potência’ and ‘Valiosa’, being economically viable. However, using the cultivar ‘Potência’ co-inoculated led to the highest profitability.

scholarly journals Technical and economic viability of cowpea co-inoculated with Azospirillum brasilense and Bradyrhizobium spp. and nitrogen doses

2020 ◽  
Vol 24 (5) ◽  
pp. 304-311
Author(s):  
Fernando S. Galindo ◽  
Marcelo C. M. Teixeira Filho ◽  
Edson C. da Silva ◽  
Salatiér Buzetti ◽  
Guilherme C. Fernandes ◽  
...  
Keyword(s):  
Grain Yield ◽  
Azospirillum Brasilense ◽  
Block Design ◽  
Operating Cost ◽  
Cost Effective ◽  
Economic Viability ◽  
Operating Profit ◽  
Randomized Block Design ◽  
Tillage System ◽  
Bradyrhizobium Spp

ABSTRACT Biological nitrogen fixation efficiency can be increased by co-inoculation with Bradyrhizobium spp. and Azospirillum brasilense, allowing even greater uptake of water and nutrients, leading to higher yields and enabling the insertion of unusual crops, such as cowpea (Vigna unguiculata L. Walp.), in the agricultural production system in the Cerrado region of Brazil. Thus, this study aimed to evaluate the technical and economic viability of cowpea in the Cerrado region, as a function of N doses and co-inoculation of seeds with Azospirillum brasilense and Bradyrhizobium. The study was carried out in a no-tillage system in Selvíria, MS, Brazil. The experimental design was a randomized block design, with four repetitions, arranged in a 3 x 5 factorial scheme, corresponding to three types of inoculation (without inoculation - control, with two strains of Bradyrhizobium spp. SEMIA 6462 and SEMIA 6463 - the conventional inoculation of cowpea, and these two strains of Bradyrhizobium spp. plus A. brasilense strains Ab-V5 and Ab-V6); and five N doses (0, 20, 40, 80 and 160 kg ha-1), as urea, applied as topdressing. The following evaluations were performed: grain yield, total operating cost, effective operating cost, gross revenue, operating profit, profitability index, equilibrium price and equilibrium yield. Co-inoculation with A. brasilense increases cowpea grain yield, which makes cowpea production in the Cerrado region of Brazil technically and economically viable, without the need to apply N fertilizers in topdressing.

scholarly journals Technical and Economic Viability of Wheat with Forms of Application and Doses of Boron

2018 ◽  
Vol 10 (4) ◽  
pp. 306 ◽  
Author(s):  
Fernando S. Galindo ◽  
Marcelo C. M. Teixeira Filho ◽  
Salatiér Buzetti ◽  
Eduardo H. M. Boleta ◽  
Willian L. Rodrigues ◽  
...  
Keyword(s):  
Experimental Design ◽  
Block Design ◽  
Leaf Tissue ◽  
Economic Viability ◽  
No Tillage ◽  
Wheat Grain ◽  
Economic Return ◽  
Randomized Block Design ◽  
Tillage System ◽  
Irrigated Wheat

Boron is one of the most limiting micronutrients in grains production system in Brazil. In this way, the objective was to evaluate the effect of forms of application and doses of boron in irrigated wheat grain yield evaluating the economic terms in Cerrado region. The experiment was conducted in no-tillage system in an Oxisol with clay texture in Selvíria, MS, Brazil. The experimental design was a randomized block design with four replicates, arranged in a 4 × 3 factorial scheme: four doses of boron (0, 1, 2 and 4 kg ha-1) with boric acid source (B = 17%); and three apllication forms: a) in desiccation of the predecessor straw, together with herbicide; b) at the time of sowing, in soil along with the formulated fertilization seeding and c) via leaf tissue with the application of post emergent herbicide. The application of 2 kg ha-1 provides greater grain yields, but the highest economic return was obtained at the dose of 1 kg ha-1, with application in soil, ensuring profitability from production of irrigated wheat in the Cerrado.

scholarly journals Corn and soybean yields as affected by cover crops and herbicide timing under no-tillage system

2013 ◽  
Vol 31 (4) ◽  
pp. 939-946
Author(s):  
P. Oliveira ◽  
A.S. Nascente ◽  
J. Kluthcouski ◽  
T.A.P. Castro
Keyword(s):  
Grain Yield ◽  
Common Bean ◽  
Cover Crops ◽  
Cover Crop ◽  
Block Design ◽  
No Tillage ◽  
Brachiaria Brizantha ◽  
Grain Yields ◽  
Randomized Block Design ◽  
Tillage System

To achieve better results in the no-tillage system (NTS), it is important to properly manage the cover crop prior to planting by using herbicides, usually glyphosate. The effect of glyphosate on plant coverage is slow, and plants take a few days to die completely. Thus, when applying the herbicide on the same day of planting soybean or corn, cover crops are still alive and standing, causing initial shading on seedlings of the crop and delaying its establishment. Therefore, this study aimed to evaluate the effect of distinct cover crops and their timing of desiccation prior to planting soybean or corn, on crop yield and yield components. Two experiments were installed, one for soybean and another for corn. Each experiment consisted in combining three cover crops (Brachiaria brizantha, common bean or millet) chemically desiccated at two timings before planting the crop (15 or 0 days before planting) under no-tillage system (NTS). Experiments were installed in a completely randomized block design with five replications. Brachiaria brizantha produced the highest amount of biomass; common bean and millet as cover crops allowed higher soybean grain yields; herbicide application under common bean, millet and Brachiaria brizantha 15 days before planting soybean allowed higher crop grain yields; desiccation timing of common bean did not affect corn grain yield; Brachiaria brizantha should be desiccated 15 days before planting corn to allow maximum grain yield; when millet was used as a cover crop, glyphosate application at planting of corn allowed the highest grain yield.

scholarly journals Effect of phosphorus applied as monoammonium phosphate-coated polymers in corn culture under no-tillage system

2018 ◽  
Vol 39 (1) ◽  
pp. 99
Author(s):  
Ana Carolina Marostica Lino ◽  
Salatiér Buzetti ◽  
Marcelo Carvalho Minhoto Teixeira Filho ◽  
Fernando Shintate Galindo ◽  
Paulo Ricardo Maestrelo ◽  
...  
Keyword(s):  
Grain Yield ◽  
Block Design ◽  
Quadratic Function ◽  
Leaf Tissue ◽  
No Tillage ◽  
Monoammonium Phosphate ◽  
Randomized Block Design ◽  
Tillage System ◽  
Essential Nutrient ◽  
Cropping Seasons

The use of phosphate fertilizers as coated polymers reduces phosphorus losses that occur by adsorption of P to soil particles, thereby providing this essential nutrient for a longer period. The objective of this study was to evaluate the effect of phosphorus doses applied as conventional monoammonium phosphate or as coated polymers on corn grown in a clayey Oxisol, in the Cerrado region. The experiment was conducted in Selvíria - MS, located at 22°22? S and 51°22? W. The experiment was laid out in a randomized block design arranged as a 4 × 2 factorial, with four doses of P2O5 (0, 50, 100, and 150 kg ha-1) and two sources of phosphorus (monoammonium phosphate (MAP) and monoammonium phosphate coated polymers). The experiment was conducted under no-tillage system during the cropping seasons in 2008/09 and 2009/10. The MAP and MAP-coated sources did not differ in most of the yield components in either of the two seasons. We found a quadratic function adjustment for P doses up to 117 and 98 kg ha-1 of P2O5 for P concentration in leaf tissue and grain yield in the 2008/2009 crop, respectively. We also obtained a quadratic function adjustment for P rates for grain yield and number of plants, up to 118 and 113 kg ha-1 of P2O5, respectively, in the 2009/2010 harvest.

scholarly journals Effect of water regimes and plant densities on cowpea production1

2017 ◽  
Vol 47 (4) ◽  
pp. 432-439 ◽  
Author(s):  
Marinete Martins de Sousa Monteiro ◽  
Edson Alves Bastos ◽  
Milton José Cardoso ◽  
Aderson Soares de Andrade Júnior ◽  
Valdenir Queiroz Ribeiro
Keyword(s):  
Grain Yield ◽  
Water Depth ◽  
Plant Density ◽  
Block Design ◽  
No Tillage ◽  
Grain Yields ◽  
Water Regimes ◽  
Randomized Block Design ◽  
Plant Densities ◽  
Tillage System

ABSTRACT Cowpea has been cultivated in a rudimentary form in the main producing regions of Brazil, resulting in lower grain yields, when compared to the crop potential. The use of technologies such as water regimes, adequate plant density and soil management are alternatives to increase this crop yield. This study aimed at evaluating the effects of different water regimes and plant densities on the yield components of cowpea cultivated under conventional and no-tillage systems. A randomized block design in a split-plot factorial, with four replications, was used. The treatments consisted of five water regimes in the plots (157.00 mm, 189.00 mm, 234.00 mm, 274.00 mm and 320.00 mm) and five plant densities as subplots (12 plants m-2, 16 plants m-2, 20 plants m-2, 24 plants m-2 and 28 plants m-2). The evaluated variables were: number of pods per plant, number of pods per area, pod length and grain yield. The combination between 270 mm of irrigation water depth with a density of 280,000 plants ha-1 resulted in higher grain yield using the no-tillage system, while the combination between the density of 280,000 plants ha-1 and 320 mm of water depth favored the highest grain yields in the conventional growing system.

scholarly journals Economic analysis of corn inoculated with Azospirillum brasilense associated with nitrogen sources and doses

2017 ◽  
Vol 38 (4) ◽  
pp. 1749
Author(s):  
Fernando Shintate Galindo ◽  
Marcelo Carvalho Minhoto Teixeira Filho ◽  
Maria Aparecida Anselmo Tarsitano ◽  
Salatiér Buzetti ◽  
José Mateus Kondo Santini ◽  
...  
Keyword(s):  
Grain Yield ◽  
Azospirillum Brasilense ◽  
Enzyme Inhibitor ◽  
Block Design ◽  
Nitrogen Sources ◽  
Mineral N ◽  
Randomized Block Design ◽  
Urease Enzyme ◽  
Set Up ◽  
Biological Nitrogen

Azospirillum brasilense is a bacterium known for its biological nitrogen fixation (BNF) in corn crops. However, there is a lack of comprehensive research defining how much mineral N should be applied to maximize the efficiency of BNF and attain high, economically sustainable yields. Moreover, it would be interesting to investigate whether adding urea with NBPT urease inhibitor might increase BNF in grasses. Therefore, the aim of this study was to determine the effect of inoculation with Azospirillum brasilense associated with N sources and doses in a Cerrado biome soil by evaluating the grain yield of irrigated corn in economic terms. The experiment was conducted in Selvíria, MS, Brazil under a no-till system on a Latossolo Vermelho distrófico (Oxisol). The experiment was set up as a randomized block design with four replications in a 2 × 5 × 2 factorial arrangement consisting of two sources of N (urea and urea with NBPT urease enzyme inhibitor) and five N doses applied as top-dressing (0, 50, 100, 150, and 200 kg ha-1), with and without the inoculation of seeds with A. brasilense. Inoculation with Azospirillum brasilense makes corn growth much more profitable, irrespective of the dose and source of N. Addition of 200 kg ha-1 N in the form of conventional urea coupled with inoculation with Azospirillum brasilense increases grain yield; however, the highest economic return is obtained with N applied at 100 kg ha-1 with conventional urea and inoculation.

scholarly journals Technical and Economic Viability of Corn with Azospirillum brasilense Associated with Acidity Correctives and Nitrogen

2018 ◽  
Vol 10 (3) ◽  
pp. 213 ◽  
Author(s):  
Fernando S. Galindo ◽  
Marcelo C. M. Teixeira Filho ◽  
Salatiér Buzetti ◽  
Willian L. Rodrigues ◽  
Eduardo H. M. Boleta ◽  
...  
Keyword(s):  
Grain Yield ◽  
Azospirillum Brasilense ◽  
Block Design ◽  
Dolomitic Limestone ◽  
Mineral N ◽  
No Till ◽  
Randomized Block Design ◽  
N Dose ◽  
Set Up ◽  
Biological Nitrogen

There is a lack of more comprehensive research defining how much mineral N can be applied as regards the efficiency of BNF to attain high with Azospirillum brasilense, what is a bacterium that stands out for its biological nitrogen fixation (BNF) in corn crops, reaching economically sustainable yields. Moreover, it would be interesting to investigate the use of silicon, which exerts numerous benefits on grasses, especially when the plants are subjected to biotic and abiotic stresses. The aim of this work was to study a synergistic effect between the inoculation with A. brasilense and the application of silicon, thus enabling a higher efficiency of nitrogen fertilization, evaluating the grain yield of irrigated corn in economic terms. The experiment was conducted in Selvíria, MS, Brazil, under a no-till system, on a Latossolo Vermelho distrófico (Oxisol). The experiment was set up as a randomized block design with four replications, in a 2 × 5 × 2 factorial arrangement consisting of two soil corrective sources (dolomitic limestone and Ca and Mg silicate as source of Si); five doses of N (0, 50, 100, 150 and 200 kg ha-1); with and without inoculation with A. brasilense. The inoculation makes the corn increase much more profitable, irrespective of N doses and corrective source. The N dose of 200 kg ha-1 with dolomitic limestone, associated with inoculation provided greater grain yield. However, the highest economic return was obtained at the N dose of 100 kg ha-1, with dolomitic limestone application and inoculation.

scholarly journals Correlations and Path Analysis in Segregating Cowpea Generations Regarding Biological Nitrogen Fixation

2022 ◽  
Vol 14 (2) ◽  
pp. 79
Author(s):  
Ismael Gaião da Costa ◽  
José Wilson da SiIva ◽  
Gheysa Coelho Silva ◽  
Mario de Andrade Lira Junior ◽  
Cybelle Souza de Oliveira ◽  
...  
Keyword(s):  
Nitrogen Fixation ◽  
Path Analysis ◽  
Biological Nitrogen Fixation ◽  
Aerial Part ◽  
Block Design ◽  
Great Influence ◽  
Dry Mass ◽  
Phenotypic Correlations ◽  
Randomized Block Design ◽  
Biological Nitrogen

The objective of this research was to evaluate the correlations between variables related to the biological nitrogen fixation (BNF) in segregating generations of cowpea and to unfold these correlations in direct and indirect effects, through path analysis. An outdoor bench experiment was conducted at Carpina Experimental Sugarcane Station of, located at the Zona da Mata region of the State of the Pernambuco, Northeast of Brazil (Federal Rural University of Pernambuco), between March and April 2016. The seeds were planted in 20 cm × 30 cm polyethylene bags, using a substrate composed of a mixture of vermiculite and sand washed in a ratio of 1:1. Bradyrhizobium references, recommended for culture, were used as a mixture of two strains. Parental and F2, F3 and F4 generations were evaluated in a randomized block design with four replicates. Data collection was performed 45 days after the emergency (DAE). Phenotypic correlations and path analysis of the number of nodules per plant (NN), nodules dry mass (NDM), dry roots mass (DRM), dry mass of aerial part (DMAP), nodulation efficiency (NODE) and nitrogen accumulated in the aerial part (NAAP). The phenotypic correlations between the variables related to the BNF showed high magnitudes, demonstrating that there is a great influence of each of the variables on the others, furthermore the path analysis of the coefficients indicated that all the primary components (NN, NDM, DRM, DMAP and NODE) must be considered when it is desired to increase the NAAP in segregating generations of cowpea.

scholarly journals Molybdenum mixed with glyphosate and alone via foliar spray in no-tillage common bean grown on corn stover

Revista CERES ◽  
2014 ◽  
Vol 61 (1) ◽  
pp. 62-69
Author(s):  
Gessimar Nunes Camelo ◽  
Geraldo Antonio de Andrade Araújo ◽  
Renildes Lucio Ferreira Fontes ◽  
Luiz Antonio dos Santos Dias ◽  
José Eustáquio de Souza Carneiro ◽  
...  
Keyword(s):  
Common Bean ◽  
Corn Stover ◽  
Field Experiments ◽  
Block Design ◽  
Foliar Spray ◽  
Cumulative Effect ◽  
No Tillage ◽  
Randomized Block Design ◽  
Tillage System ◽  
Mo Content

The effect of molybdenum (Mo) on common bean grown in desiccated corn stover in a no-tillage system was evaluated under two application modes: Mo mixed with the desiccant glyphosate and Mo direct spray to the bean leaves. The treatments (four replicates) were assigned to a completely randomized block design in a split-plot arrangement with the application of Mo (0, 100, 200, 400 and 800 g ha-1) mixed with glyphosate in the main plots and Mo foliar spray (0 and 100 g ha-1) in the sub-plots. The field experiments were carried out in 2009 and 2010 in the municipality of Coimbra, Minas Gerais State, with the common bean cultivar Ouro Vermelho. Mo mixed with glyphosate had neither an effect on common bean yield nor on the Mo and N contents in leaves, however it increased the Mo and N contents in seeds. Application of Mo via foliar spray increased Mo content in leaves and Mo and N contents in seeds. The reapplication of molybdenum with glyphosate for desiccation in subsequent crops caused a cumulative effect of Mo content in bean seeds.

scholarly journals Multivariate analysis and determination of the best indirect selection criteria to genetic improvement the biological nitrogen fixation ability in common bean genotypes (Phaseolus vulgaris L.)

Genetika ◽  
2012 ◽  
Vol 44 (2) ◽  
pp. 279-284 ◽  
Author(s):  
Reza Golparvar
Keyword(s):  
Nitrogen Fixation ◽  
Common Bean ◽  
Biological Nitrogen Fixation ◽  
Genetic Improvement ◽  
Selection Criteria ◽  
Block Design ◽  
Indirect Selection ◽  
Shoot Number ◽  
Biological Yield ◽  
Biological Nitrogen

In order to determine the best indirect selection criteria for genetic improvement of biological nitrogen fixation, sixty four common bean genotypes were cultivated in two randomized complete block design. Genotypes were inoculated with bacteria Rhizobium legominosarum biovar Phaseoli isolate L-109 only in one of the experiments. The second experiment was considered as check for the first. Correlation analysis showed positive and highly significant correlation of majority of the traits with percent of nitrogen fixation. Step-wise regression designated that traits percent of total nitrogen of shoot, number of nodule per plant and biological yield accounted for 92.3 percent of variation exist in percent of nitrogen fixation. Path analysis indicated that these traits have direct and positive effect on percent of nitrogen fixation. Hence, these traits are promising indirect selection criteria for genetic improvement of nitrogen fixation capability in common bean genotypes especially in early generations.

Sign in / Sign up

Export Citation Format

Share Document