scholarly journals Yield and phenology of yam as affected by the physiological rest period of seed-rhizomes

2008 ◽  
Vol 26 (2) ◽  
pp. 154-157
Author(s):  
Ademar P de Oliveira ◽  
Márcio F de Moura ◽  
Edna U Alves ◽  
Anarlete U Alves ◽  
Arnaldo Nonato P de Oliveira ◽  
...  
Keyword(s):  
Plant Height ◽  
Block Design ◽  
Rest Period ◽  
Field Conditions ◽  
Average Mass ◽  
Rest Periods ◽  
Randomized Block Design

The objective of this work was to evaluate the effects of the rest period of seed-rhizomes in the phenology and yield of yam Da Costa (Dioscorea cayennensis). The experiment was carried out in field conditions at the Federal University of Paraíba, in Areia, Brazil, from January to December 2004, in an Ustpsamment soil. A completely randomized block design was used to test three treatments, 60-, 80-, and 100-day seed-rhizome rest periods, with seven replications. Plant emergency was evaluated every ten days from 40 to 90 days after planting (DAP), as well as plant height, evaluated up to 80 DAP. The average mass of commercial rhizomes and the yield of commercial and seed-rhizomes were also assessed. At 40, 50, and 60 days after planting, plant emergency was superior for seed-rhizomes submitted to 100-day rest periods. At 70 and 80 DAP, there were no significant differences. At 90 DAP, seed-rhizomes that rested for 60 and 100 days provided around 91 and 83% of plant emergency, respectively. Concerning plant height, seed-rhizomes that rested 100 days produced the tallest plants. The average mass of commercial rhizomes and the yield of commercial and seed-rhizomes were 1.22 kg, 13.1 t ha-1, and 7.7 t ha-1, respectively, for seed rhizomes submitted to 60-day rest periods. For 100-day rest period rhizomes, the average mass of commercial rhizomes and the yield of commercial and seed-rhizomes, were 0.73 kg, 7.7 t ha-1, and 1.7 t ha-1, respectively.

scholarly journals Levels and times of artificial defoliation on performance of second cycle cassava

2019 ◽  
pp. 1162-1168
Author(s):  
Martios Ecco ◽  
Antonio Carlos Torres da Costa ◽  
José Barbosa Duarte Junior ◽  
Paulo Ricardo Lima ◽  
Vandeir Francisco Guimarães
Keyword(s):  
Plant Height ◽  
Low Temperatures ◽  
Plant Root ◽  
Block Design ◽  
Rest Period ◽  
First Year ◽  
Root Mass ◽  
Linear Effect ◽  
Randomized Block Design ◽  
Regression Test

The information on behavior of crop linked to defoliation is essential to determine the management of herbivore pests. The aim of this study was to evaluate the performance of cassava as a function of the time and level of defoliation applied in the second cycle of cultivation, that is, after the first year of cultivation in which the crop was naturally submitted to the physiological rest period, caused by low temperatures and pluviometric precipitation typical of the southern Brazilian region. We used a randomized block design in factorial 5 x 5.in which 5 levels of defoliation (0, 25, 50, 75 or 100% of defoliation) were applied at 5 different times of 45, 90, 135, 180, or 225 days after sprouting (DAS) of the stems. The following variables were measured: plant height, stem diameter, number of roots per plant, root mass and amount of starch in the roots. The means were submitted to the F test at 5% of probability and analyzed by the regression test using the Sisvar software. Plant height and diameter were inversely proportional to the degree of defoliation when subjected to treatments, especially when subjected to 100% defoliation at 90 DAS. For the root mass, the more drastic defoliation treatments (100 %), when applied at 132 DAS, led to a low production, whereas only the defoliation levels induced a meaningful reduction in the deposition of starch in roots, showing a linear effect and decreasing according to the increase in defoliation. It can be concluded that defoliation between 90 and 135 DAS at the more drastic levels resulted in a greater root mass loss, regardless of the time of defoliation, caused the greatest losses in the amount of starch, therefore, it is recommended to the producer to control this pest before the 90 days of sprouting of the stems at the beginning of the defoliation.

PENGARUH KOMPOS SAMPAH KOTA DAN PUPUK KANDANG SAPI TERHADAP PERTUMBUHAN DAN HASIL TANAMAN PAKCOY (BRASSICA RAPA, L. CHINENSIS) PADA ALUVIAL KABUPATEN INDRAMAYU

2018 ◽  
Vol 9 (2) ◽  
pp. 153-163
Author(s):  
Wiwik Ambarsari ◽  
Henly Yuliana
Keyword(s):  
Plant Height ◽  
Brassica Rapa ◽  
Block Design ◽  
Cattle Manure ◽  
Growth And Yield ◽  
Randomized Block Design ◽  
Two Factors ◽  
Number Of Leaves ◽  
Experimental Garden

The study aimed to determine the effect of the combination of city waste compost and cattle manure on the growth and yield of pakcoy plants (Brassica rapa, L. Chinensis) in Aluvial, Indramayu Regency. The study was conducted at the Experimental Garden of the Faculty of Agriculture, Wiralodra University, Indramayu Regency from March to August 2018. This study used Factorial Pattern Randomized Block Design with two factors. The first factor is city waste compost and the second factor is cattle manure with 4 levels: 0%, 3.0%, 6.0%, and 9.0%, repeated twice. The results showed that there was an independent influence between city waste compost and cattle manure on plant height and number of leaves. The best combination to increase the feasibility weight of pakcoy consumption is by giving city waste compost 9.0% (S4) and cattle manure 6.0% (K3).

scholarly journals Influence of vernalization and bulb size on the production of lily cut flowers and lily bulbs

2017 ◽  
Vol 38 (4Supl1) ◽  
pp. 2399 ◽  
Author(s):  
Diogo Brito de Almeida ◽  
José Geraldo Barbosa ◽  
José Antônio Saraiva Grossi ◽  
Fernando Luiz Finger ◽  
Joice Crescencio Heidemann
Keyword(s):  
Plant Height ◽  
Block Design ◽  
Cut Flowers ◽  
Floral Buds ◽  
Randomized Block Design ◽  
Commercial Harvest ◽  
Physiological Phenomenon ◽  
Cold Chamber ◽  
The Impact

Exposure of bulbs to cold, a physiological phenomenon called vernalization, and bulb size are important factors in the production of lily bulbs and flowers. This study aimed to verify the influence of vernalization of bulbs on flowering cut lily plants, as well as the impact of size and shape of harvest on the production and quality of flowers and bulbs. In turn, the way the stems of the plants used for cut-flower production are cropped is of higher importance for the production of new flower bulbs. In this sense, the experiment was conducted in Viçosa, MG, in a greenhouse in a randomized block design, in split splot scheme with three replications, in which the vernalization periods (25, 35 and 45 days at 4 ± 1 C) constituted the plots; bulb sizes (diameters of 3.2-3.8 cm; 2.5-3.2 cm 1.9- and 2.5 cm), subplots and ways to harvest (full harvest of the stem at the required length for the commercial harvest of the flower, commercial stem harvest at the commercial length, maintaining 10cm of stem in the soil; removal of the floral buds as soon as their appearance is observed and harvest at the end of the season), the sub subplots. The bulbs were planted in beds, with 15 x 20 cm spacing. It was evaluated the number of plants that flowered and the number of flowers, the length and the diameter of the floral buds, fresh and dry weights, diameter and plant height as well as number, perimeter and amount of fresh and dry bulbs. There was a decrease in the plant height with the increase of the vernalization period and a reduction of the diameter of the planted bulbs, as well as of the number and the fresh and dry weights of the produced buds. The production of flowers and buds in number, size and weight was directly proportional to the size of the planted bulbs, while the form of harvest with removal of flower buds increased the number, the perimeter and the fresh and dry weights of the buds. Bulbs with diameter between 3.2 - 3.8 cm, stored for 25 days in cold chamber enable greater production of flowers and the highest stem height, factors that favor the increase in market value.

scholarly journals Yield and vegetative growth of cactus pear at different spacings and under chemical fertilizations

2016 ◽  
Vol 20 (6) ◽  
pp. 564-569 ◽  
Author(s):  
João A. da Silva ◽  
Sérgio L. R. Donato ◽  
Paulo E. R. Donato ◽  
Evilasio dos S. Souza ◽  
Milton C. Padilha Júnior ◽  
...  
Keyword(s):  
Plant Growth ◽  
Plant Height ◽  
Vegetative Growth ◽  
Dry Matter ◽  
Block Design ◽  
Plant Age ◽  
Cactus Pear ◽  
Area Index ◽  
Randomized Block Design

ABSTRACT The objective was to evaluate the effect of different spacings and mineral fertilizations on cactus pear growth and production in a randomized block design, with three replicates, in a 3 x 4 factorial scheme: three spacings, 1.00 x 0.50 m, 2.00 x 0.25 m and 3.00 x 1.00 x 0.25 m, and four fertilizations, 000-000-000, 000-150-000, 200-150-000 and 200-150-100 kg ha-1 of N, P2O5 and K2O, respectively. Plant growth was evaluated between 90 and 390 days and production and growth were evaluated at 620 days after planting. There were significant interactions between spacing and fertilization for plant height, number of cladodes and cladode area index from 90 to 390 days and for production of fresh and dry matter at 620 days after planting. Spacing influenced cladode area index, while fertilization influenced plant height, number of cladodes and cladode area index at 620 days after planting. Plant height showed cubic effect for the days after planting. Number of cladodes and cladode area index were dependent on spacing, fertilization and plant age, and fitted to cubic models. The best results of growth and production of fresh and dry matter are associated with NPK and NP fertilizations and the spacing of 1.00 x 0.50 m.

scholarly journals Response of growth and yield of two soybean varieties to seed pre-treatment applications

2021 ◽  
Vol 883 (1) ◽  
pp. 012052
Author(s):  
N Herawati ◽  
A R Aisah ◽  
I Mardian ◽  
B N Hidayah ◽  
B T R Erawati
Keyword(s):  
Plant Height ◽  
Seed Treatment ◽  
Seed Quality ◽  
Block Design ◽  
Growth And Yield ◽  
Agronomic Crops ◽  
Randomized Block Design ◽  
Two Factors ◽  
Pre Treatment ◽  
Four Levels

Abstract Plant growth is influenced by seed quality. Seeds need to be treated to prevent pest and disease disorders or to increase seed germination. Soybean planting was carried out in this study by the treatment of varieties and seed pre-treatment application before planting. The study aimed to measure the growth and yield of soybeans by varieties and seed treatment before planting, carried out in the Village of Nggembe, District of Bolo, Bima Regency. The study used factorial randomized block design with two factors. The first factor was soybean varieties consisting of two levels, namely Devon and Dena varieties, and the second factor was the application of pre-planting seed treatments consisting of four levels namely Cruiser, Marshall, Agrisoy, and without seed treatment, each treatment was repeated three times. Observations were made on the performance of agronomic crops and soybean yields. The results showed that the treatment of soybean varieties and the application of seed treatment had a significant influence on plant height and soybean productivity, and both treatments had interactions on parameters of plant height, number of filled pods, weight of 100 seeds, and soybean productivity with the best results successively produced by a combination of Devon-Control, Devon-Marshall, Devon-Agrisoy, and Dena-Cruiser.

scholarly journals Genetic Analysis of Some Genotypes of Indian Mustard (Brassica juncea L.) for Yield and Yield Attributing Traits

2021 ◽  
pp. 51-60
Author(s):  
A. M. Pradhan ◽  
M. Roy Choudhury ◽  
A. Sawarkar ◽  
S. Das
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Seed Weight ◽  
Block Design ◽  
Indian Mustard ◽  
Correlation Study ◽  
Biotic And Abiotic Stress ◽  
Randomized Block Design ◽  
Additive Gene ◽  
Positive Direct

The current investigation was carried out to examine the selection criteria for yield improvement in selected genotypes of Indian mustard. Twenty-four genotypes of Indian mustard were evaluated for seed yield and yield attributing characters with randomized block design with three replications. The analysis of variance showed significant differences among all the 24 genotypes against all the characters. The phenotypic and genotypic coefficient of variation were higher for most of the traits like seed yield per plant, number of secondary branches per plant and number of siliquae per plant. High heritability coupled with high genetic advance in percent of mean was registered for number of siliquae per plant, number of primary and secondary branches per plant, plant height, 1000 seed weight, siliqua length per plant and seed yield per plant suggesting predominant role of additive gene action for expression of these traits. The correlation study revealed that seed yield per plant was positively and significantly correlated with number of primary and secondary branches per plant, number of siliquae per plant, siliqua length per plant and 1000 seed weight at both phenotypic and genotypic level. The traits namely, number of secondary branches per plant recorded as highest positive direct effect followed by number of seeds per siliqua, number of siliquae per plant and plant height. Therefore, they may be carried out further evaluation in multilocational trials, biotic and abiotic stress like environmental conditions to check their stability and adaptability.

scholarly journals Optimasi Dosis Pupuk Kandang Ayam dan NPK pada Budidaya Kubis Bunga (Brassica oleracea var. Botrytis L.)

2021 ◽  
Vol 2 (1) ◽  
pp. 32
Author(s):  
Irpan Gunawan ◽  
Atak Tauhid ◽  
Isna Tustiyani
Keyword(s):  
Leaf Area ◽  
Plant Height ◽  
Block Design ◽  
Chicken Manure ◽  
Growth And Yield ◽  
Randomized Block Design ◽  
Affected Plant ◽  
Two Factors ◽  
Number Of Leaves ◽  
Npk Fertilizer

<p><em>Cauliflower is one of the vegetables for consumers. The demand for cauliflower was rising so it must be scaled up with fertilizer. The purpose of this study was to study the effect of chicken manure and NPK fertilizer on the growth and yield of cauliflower. The study was conducted in Sukasenang Village, Banyuresmi Sub-district, Garut Regency from July to August 2019. The study used a Randomized Block Design (RBD) in two factors each of the 3 rates with 2 replications. The first factor was the rates of chicken manure which consisted of 0, 10 and 20 tons ha<sup>-1</sup>; the second factor was NPK fertilizer which consists of 0, 100 and 200 kg ha<sup>-1</sup>. The parameter of this research was plant height, number of leaves, leaf area, weight and diameter crud. The results showed that there was no interaction between the chicken manure and NPK fertilizer. The treatment of 20 tons ha<sup>-1</sup> chicken manure affected the variable plant height, the number of leaves and leaf area. The rates of 200 kg ha<sup>-1</sup> NPK fertilizer had affected plant height, number of leaves, weight and diameter crud.</em></p>

scholarly journals Control of Conyza spp. with sequential application of glufosinate in soybean pre-sowing

2020 ◽  
Vol 50 (9) ◽  
Author(s):  
Alfredo Junior Paiola Albrecht ◽  
Leandro Paiola Albrecht ◽  
André Felipe Moreira Silva ◽  
Romulo Augusto Ramos ◽  
Natália Buttini Corrêa ◽  
...  
Keyword(s):  
Plant Height ◽  
Seed Production ◽  
Management System ◽  
Block Design ◽  
Agronomic Performance ◽  
General Control ◽  
Crop Injury ◽  
Randomized Block Design ◽  
Soybean Plants

ABSTRACT: Conyza spp. is among the main weeds reported worldwide. Due to its aggressiveness, such as high seed production and dispersion, and the growing reports of biotypes resistant to glyphosate, paraquat, and other herbicides, different control practices are required. Thus, this study aimed to evaluate the efficacy of herbicides with sequential application of glufosinate in soybean pre-sowing for control of Conyza spp. with indicative of resistant to paraquat. The study was carried out in the field, at Assis Chateaubriand and Palotina, state of Paraná, Brazil, in the 2018/19 season. The experiments were conducted in a randomized block design with four replications. The treatments consisted in application of glyphosate, 2,4-D, saflufenacil, glufosinate, saflufenacil/imazethapyr, diclosulam, paraquat/diuron, paraquat and imazethapyr/flumioxazin, at different combinations, in soybean pre-sowing. Control of Conyza spp., crop injury to soybean plants and variables related to agronomic performance (plant height and yield) were evaluated. All treatments were selective for soybean, which showed stronger crop injury in the presence of diclosulam herbicide, but this did not compromise soybean agronomic performance. In general, control levels were high for the treatments used. Except for paraquat treatments, in the area with the highest frequency of Conyza spp. with indicative of resistant to paraquat, and imazethapyr/flumioxazin treatment in both areas. These control results emphasized the importance of glufosinate in this management system and showed promising results for saflufenacil/imazethapyr.

scholarly journals GENETIC VARIABILITY, HERITABILITY AND EXPECTED GENETIC ADVANCES OF QUANTITATIVE CHARACTERS IN F2 PROGENIES OF SOYBEAN CROSSES

2014 ◽  
Vol 15 (1) ◽  
pp. 11
Author(s):  
Lukman Hakim ◽  
Suyamto Suyamto ◽  
Eman Paturohman
Keyword(s):  
Plant Height ◽  
Seed Size ◽  
Block Design ◽  
Genetic Advance ◽  
Genetic Progress ◽  
Early Maturity ◽  
Plant Seed ◽  
Randomized Block Design ◽  
Days To Maturity ◽  
Coefficient Of Variability

The F2 progenies of crosses among three soybean varieties were evaluated with their parents at Ngale Experimental Farm, Ngawi, East Java during the dry season of 2011. The experi-ment was conducted in a randomized block design with three replications. The seeds of each F2 progenies and parents were planted in two rows of 4.5 m long. Plant spacing was 40 cm x 15 cm and each hill contained one plant. Among the characters studied, seed weight per plant, number of pods per plant and days to maturity had the highest coefficient of variability with the means of 52.6%, 48.2% and 41.9%, respectively. Whereas seed size, plant height and number of reproductive nodes had moderate values of 36.9%, 35.5% and 37.4%, respectively. Number of branches and days to flowering had the lowest variability of 11.7% and 15.3%, respectively. Number of pods per plant, days to maturity, plant height and seed size had high mean estimates of heritability coupled with high genetic advance. The genetic progress of these characters that would be obtained for one generation of selection was estimated 47.2%, 45.7%, 40.9% and 40.3%, respectively. Among the agronomic characters, plant height, number of pods per plant, seed size and days to maturity had the highest coefficient of variability associated with high heritability and genetic advance. Therefore, selection for high yielding with early maturity soybean genotypes based on plant height, number of pods per plant and seed size might be possible.

scholarly journals COMBINING ABILITY STUDIES FOR GROWTH AND YIELD CHARACTERS OF BHENDI ABELMOSCHUS ESCULENTUS (L.) MOENCH)

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
S. Kalaiselvan ◽  
S. Anuja
Keyword(s):  
Plant Height ◽  
Combining Ability ◽  
Block Design ◽  
Fruit Weight ◽  
Growth And Yield ◽  
F1 Hybrids ◽  
Randomized Block Design ◽  
Final Harvest ◽  
Weight Number ◽  
Number Of Branches

The present investigation consisted of 9 lines, 3 testers with their 27 F1 hybrids developed through line x tester mating fashion in randomized block design with three replications. Parents and hybrids differed significantly for gca and sca effects, respectively. Among the parents, maximum gca effect was found in EC 112241 and Aruna for inter node distance, EC 112241 and Arka Anamika for single fruit weight, EC 109454, EC 169344 and Arka Anamika for number of branches per plant, EC 169331 and Arka Anamika for number of fruits per plant, EC 109454 and Aruna for plant height at final harvest. The crosses exhibited maximum positive significant sca effect was observed in EC 112241 x Aruna, EC 109454 x Kashi Kranti and EC 112264 x Aruna were found as good specific combiners for single fruit weight, number of branches per plant and number of fruits per plant respectively. The hybrid EC 112264 x Aruna exhibited maximum significant negative sca effects for inter node distance and plant height at final harvest.

Sign in / Sign up

Export Citation Format

Share Document