scholarly journals Macrophage phagocytosis of Candida albicans. An in vitro study

1999 ◽  
Vol 13 (3) ◽  
pp. 233-238 ◽  
Author(s):  
Ilan WEINFELD ◽  
Esther Goldenberg BIRMAN ◽  
Claudete Rodrigues PAULA

Considering the role of macrophages in relation to fungi and the various utilized methodologies, the authors established an in vitro model to evaluate macrophage phagocytosis of Candida albicans. Activated macrophages were obtained from the peritoneal cavity of isogenic mice (A/Sn). Two different strains of Candida albicans serotype A and serotype B with different levels of pathogenicity in vivo and other similar characteristics were utilized in the study. Several microscopic fields containing about 200 macrophages were counted. The percentage of macrophages phagocytizing at least one viable or nonviable yeast cell determined an average number of phagocytized yeasts. Neutral red and fluorescein diacetate plus ethidium bromide were used for staining. It is possible to conclude that this is an efficient model related to the used methodology. The average number of yeasts in both strains were similar when inside macrophages, and there was a higher percentage of C. albicans serotype A phagocytosis, which was not experimentally pathogenic in vivo.

1996 ◽  
Vol 33 (2) ◽  
pp. 150-156 ◽  
Author(s):  
James P. Bradley ◽  
Jamie P. Levine ◽  
Christopher Blewett ◽  
Thomas Krummel ◽  
Joseph G. Mccarthy ◽  
...  

The biology underlying craniosynostosis remains unknown. Previous studies have shown that the underlying dura mater, not the suture itself, signals a suture to fuse. The purpose of this study was to develop an in vitro model for cranial-suture fusion that would still allow for suture-dura interaction, but without the influence of tensional forces transmitted from the cranial base. This was accomplished by demonstrating that the posterior frontal mouse cranial suture, known to be the only cranial suture that fuses in vivo, fuses when plated with its dura in an organ-culture system. In such an organ-culture system, the sutures are free from both the influence of dural forces transmitted from the cranial base and from hormonal influences only available in a perfused system. For the cranial-suture fusion in vitro model study, the sagittal sutures (controls that remain patent in vivo) and posterior frontal sutures (that fuse in vivo) with the underlying dura were excised from 24-day-old euthanized mice, cut into 5 × 4 × 2-mm specimens, and cultured in a chemically defined, serum-free media. One hundred sutures were harvested at the day of sacrifice, then every 2 days thereafter until 30 days in culture, stained with H & E, and analyzed. A subsequent cranial-suture without dura in vitro study was performed in a similar fashion to the first study, but only the calvariae with the posterior frontal or sagittal sutures (without the underlying dura) were cultured. Results from the cranial-suture fusion in vitro model study showed that all sagittal sutures placed in organ culture with the underlying dura remained patent. More importantly, the posterior frontal sutures with the underlying dura, which were plated-down as patent at 24 days of age, demonstrated fusion after various growth periods in organ culture. In vitro posterior frontal mouse-suture fusion occurred in an anterior-to-posterior direction but in a delayed fashion, 4 to 7 days later than in vivo posterior frontal mouse-suture fusion. In contrast, the subsequent cranial-suture without dura in vitro study showed patency of all sutures, including the posterior frontal suture. These data from in vitro experiments indicate that: (1) mouse calvariae, sutures, and the underlying dura survive and grow in organ-culture systems for 30 days; (2) the local dura, free from external influences transmitted from the cranial base and hormones from distant sites, influences the cells of its overlying suture to cause fusion; and (3) without dura influence, all in vitro cranial sutures remained patent. By first identifying the factors involved in dural-suture signaling and then regulating these factors and their receptors, the biologic basis of suture fusion and craniosynostosis may be unraveled and used in the future to manipulate pathologic (premature) suture fusion.


2012 ◽  
Vol 468-471 ◽  
pp. 1941-1945 ◽  
Author(s):  
Yan Li Fan ◽  
Wen Hang Wang ◽  
Hong Shuo Chen ◽  
Nian Liu ◽  
An Jun Liu

The effects of an acidic polysaccharide from Gracilaria lemaneiformis (GLSPs) on the immunomodulation in vitro and in vivo were investigated. It was shown that GLSPs with different concentrations significantly promoted the splenocyte proliferation and macrophage phagocytosis in vitro. In addition, GLSPs also remarkably enhanced the splenocyte proliferation induced by ConA or LPS in mice, notably improved the macrophage phagocytosis towards neutral red, and increased the percentages of CD3+ and CD4+ cells in peripheral blood of mice. The results suggested that GLSPs has significant effect on immunomodulation, and may have biomedical material applications and potential use in stimulating the immune system.


Perfusion ◽  
2001 ◽  
Vol 16 (4) ◽  
pp. 293-299 ◽  
Author(s):  
Michelle L Muhle ◽  
Alfred H Stammers ◽  
Kimberly D Tremain ◽  
Kevin S Niimi ◽  
Kimberly R Glogowski ◽  
...  

A common anesthetic technique utilized during cardiopulmonary bypass (CPB) includes the use of various inhalation agents, such as isoflurane. The purpose of this study was to evaluate the effects of this agent on oxygen transfer during CPB. An in vitro model was designed using bovine blood. Blood flow was held constant at 2 l/min, while gas flow was manipulated at 1 and 3 l/min. The percentage of inspired oxygen (FiO2) was set at 50 and 100%, and isoflurane was manipulated to 1.0, 3.0 and 5.0%. Blood gas analysis, oxygen transfer, and inlet and outlet isoflurane concentrations were measured at each of the given conditions. A total of 12 trials with four oxygenators were conducted. In the four oxygenators used in our study, no significant differences in oxygenator performance were found. At conditions of 1 l/min gas flow, 50% FiO2 and 1% isoflurane, there were no significant changes in O2 transfer between baseline and measurements taken during isoflurane administration (100.18 ± 12.49 vs 102.35 ± 10.99 ml O2/min, p=0.8031). At 3 l/min gas flow, 100% FiO2 and 5% isoflurane, no significant differences were found (142.35 ± 10.76 vs 154.04 ± 8.95 ml O2/min, p=0.1459). The only significant differences found for oxygen transfer were between 50 and 100% FiO2, all other conditions being set equal (102.35 ± 10.99 vs 137.68 ± 8.62 ml O2/min, p=0.0023). In conclusion, increasing concentrations of isoflurane up to 5% does not affect the efficiency of oxygen transfer in an in vitro circuit. Further studies are necessary to evaluate the effects in an in vivo setting.


1993 ◽  
Vol 21 (1) ◽  
pp. 38-42
Author(s):  
Romana Pulci ◽  
Donatella Moneta ◽  
Philippe Dostert ◽  
Marco Brughera ◽  
Giovanna Scampini ◽  
...  

The aim of this study was to verify an in vitro model of hepatotoxicity, designed to assess the production of reactive species from biologically-inert chemicals through their metabolic transformation. One example is allyl alcohol, which produces acrolein through the action of the enzyme alcohol dehydrogenase. Acrolein is a highly hepatotoxic aldehyde which is detoxified to acrylic acid by aldehyde dehydrogenase (ALDH). A deficiency of this enzyme, common in some Asian populations, can give rise to pathological conditions of hepatotoxicity. Isolated rat hepatocytes were incubated with allyl alcohol with and without cyanamide, a known inhibitor of ALDH. The toxicity of allyl alcohol, assessed on the basis of release of glutamic-oxaloacetic transaminase (GOT), glutamic-pyruvic transaminase (GPT) and lactate dehydrogenase (LDH) into the culture medium, was dramatically increased by the addition of cyanamide. In vivo, the same treatment scheme was used in rats treated with allyl alcohol with or without cyanamide pretreatment. It was also demonstrated that allyl alcohol toxicity is dramatically enhanced by the addition of an aldehyde dehydrogenase inhibitor, as shown by plasma levels of hepatic enzymes (GOT, GPT and LDH) and by histological findings. We believe that this in vitro model, involving the use of enzyme inhibitors, could be useful for verification of the hypothesis that hepatotoxins, such as acrolein, are produced from some pharmaceutical and other chemical compounds.


Author(s):  
Kristian Kniha ◽  
Frank Hölzle ◽  
Faruk Al-Sibai ◽  
Johannes Jörg ◽  
Reinhold Kneer ◽  
...  

Thermal treatment may reverse the osseointegration of implants and could become an atraumatic controlled method for implant removal in the future. The aim of this non-random in vitro study was to empirically identify suitable sources for a controlled heating process, in order to generate a homogenous temperature distribution at a threshold level of 47°C for future in vivo research. Two different set-ups evaluating four different sources (water, laser, monopolar and an electrical joule heater device) were used to carry out infrared measurements and numerical calculations at 47°C along the implant axis and along the periimplant area at the axial plane. Furthermore, required time intervals to heat up the implant tip from 33°C to 47°C were determined. The monopolar electric device led to the most uneven and unpredictable implant heating and was therefore excluded. The thermal analysis suggested identical thermal distributions without any significant differences for water and electrical joule sources with a heat maximum at the implant shoulder (p > 0.05). On the other hand, the laser device may produce the temperature maximum in the middle of the implant without any afterglow effect (p < 0.01). When the implant was heated from 33°C up to 47°C, the water device indicated the fastest approach. Thermal distributions of water and laser sources may be suitable for clinical applications. For future research the numerical analysis may suggests an ideal time interval of 120s to 180s for a homogenous implant temperature of 47°C.


2005 ◽  
Vol 127 (7) ◽  
pp. 1110-1120 ◽  
Author(s):  
Bryn A. Martin ◽  
Wojciech Kalata ◽  
Francis Loth ◽  
Thomas J. Royston ◽  
John N. Oshinski

A simplified in vitro model of the spinal canal, based on in vivo magnetic resonance imaging, was used to examine the hydrodynamics of the human spinal cord and subarachnoid space with syringomyelia. In vivo magnetic resonance imaging (MRI) measurements of subarachnoid (SAS) geometry and cerebrospinal fluid velocity were acquired in a patient with syringomyelia and used to aid in the in vitro model design and experiment. The in vitro model contained a fluid-filled coaxial elastic tube to represent a syrinx. A computer controlled pulsatile pump was used to subject the in vitro model to a CSF flow waveform representative of that measured in vivo. Fluid velocity was measured at three axial locations within the in vitro model using the same MRI scanner as the patient study. Pressure and syrinx wall motion measurements were conducted external to the MR scanner using the same model and flow input. Transducers measured unsteady pressure both in the SAS and intra-syrinx at four axial locations in the model. A laser Doppler vibrometer recorded the syrinx wall motion at 18 axial locations and three polar positions. Results indicated that the peak-to-peak amplitude of the SAS flow waveform in vivo was approximately tenfold that of the syrinx and in phase (SAS∼5.2±0.6ml∕s,syrinx∼0.5±0.3ml∕s). The in vitro flow waveform approximated the in vivo peak-to-peak magnitude (SAS∼4.6±0.2ml∕s,syrinx∼0.4±0.3ml∕s). Peak-to-peak in vitro pressure variation in both the SAS and syrinx was approximately 6 mm Hg. Syrinx pressure waveform lead the SAS pressure waveform by approximately 40 ms. Syrinx pressure was found to be less than the SAS for ∼200ms during the 860-ms flow cycle. Unsteady pulse wave velocity in the syrinx was computed to be a maximum of ∼25m∕s. LDV measurements indicated that spinal cord wall motion was nonaxisymmetric with a maximum displacement of ∼140μm, which is below the resolution limit of MRI. Agreement between in vivo and in vitro MR measurements demonstrates that the hydrodynamics in the fluid filled coaxial elastic tube system are similar to those present in a single patient with syringomyelia. The presented in vitro study of spinal cord wall motion, and complex unsteady pressure and flow environment within the syrinx and SAS, provides insight into the complex biomechanical forces present in syringomyelia.


2021 ◽  
Vol 2021 ◽  
pp. 1-6
Author(s):  
Tareq Hajaj ◽  
Antonis Perdiou ◽  
Cosmin Sinescu ◽  
Mihai Rominu ◽  
Meda Lavinia Negrutiu ◽  
...  

In vitro studies have shown that rapid penetration of bacteria in the entire root canal system may occur after endodontic treatment without a coronal seal. A proper restorative technique is necessary to ensure a coronal seal and protection of the residual dental structure. The aim of this in vitro study was to evaluate the coronal sealing ability of the most relevant clinical materials by means of dye penetration (neutral red dye, Sigma-Aldrich, Germany), through a light spectrometric device, and to establish which one of the tested dental materials possesses the best sealing ability. Forty-two extracted teeth were prepared and used for this experiment; they were sealed with 5 different cements. The flow composite had the best absorbance value with 0.00675 ± 0.00096 (mean ± standard deviation) for monoradicular samples and 0.025 ± 0.00129 for pluriradicular samples. Under the constraints of the present study, both flowable and packable composite materials can be recommended as orifice sealing materials to prevent microleakage in an endodontically treated tooth. To assess the clinical superiority of any material, further in vivo studies are required.


1989 ◽  
Vol 9 (3) ◽  
pp. 169-173 ◽  
Author(s):  
Mary Anne Luzar ◽  
Alain Slingeneyer ◽  
Alberto Cantaluppi ◽  
Francesco P. Peluso

Previously published in vitro results, confirmed by clinical studies, indicate that the use of a flush significantly reduces peritonitis in single-use and reusable continuous ambulatory peritoneal dialysis (CAPD) systems. Since reusable systems may use the flush plus inline disinfectant between exchanges, the question remains as to whether or not the flush could be used alone in all disconnect systems. Using an in vitro model, we evaluated the flush in two reusable disconnect systems that use both flush and disinfectant in vivo. In a series of twenty sets per organism per incubation (0 h and 10 h), Y sets were inoculated in the lumen with three pure cultures (103 CFU range). Ability of flush without disinfectant to clear sets of contamination was analyzed by collecting multiple samples at each step of the procedure, enriching with tryptone broth and verifying bacterial growth. When contaminated sets were not incubated, flush efficacy of the systems was consistent with previous data showing 100% removal of Staphylococcus epidermidis, but only partial elimination of Staphylococcus aureus and Pseudomonas aeruginosa. After incubation, simulating reusable systems, the flush was able to eliminate S. epidermidis less than 50% of the time. There was no significant difference in results between the two systems tested. Reusable systems allow more contact time between bacteria and plastic resulting in reduced flush efficacy suggesting that, for safest conditions, they should be used with inline disinfectants.


1996 ◽  
Vol 40 (11) ◽  
pp. 2511-2516 ◽  
Author(s):  
J A Vazquez ◽  
M T Arganoza ◽  
J K Vaishampayan ◽  
R A Akins

The use of azole prophylaxis as a measure to prevent invasive fungal infections in high-risk patients is increasing and is now the standard of care in many institutions. Previous studies disagree on whether preexposure of Candida albicans to azoles affects their subsequent susceptibility to amphotericin B (AmB). The present in vitro study indicates that azole exposure generates a subpopulation of cells that are not affected by subsequent exposure to AmB. These cells that are phenotypically resistant to AmB tolerated by most cells not exposed to azole. The percentage of cells that convert to phenotypic resistance to AmB varies with the concentration and the azole. Itraconazole is more effective than fluconazole in generating cells that are phenotypically resistant to AmB and that tolerate an otherwise lethal transient exposure to AmB. Until cells that are not exposed to fluconazole are simultaneously challenged with AmB, they are not protected to a significant extent from killing by AmB. Cells that are challenged with continuous exposure to AmB also acquire phenotypic resistance to AmB at increased frequencies by azole preexposure, but this requires that the azole be continuously present during incubation with AmB. In addition, Candida cells taken from mature colonies that are not actively growing are not susceptible to the short-term killing effects of AmB without azole preexposure. The adaptive responses of C. albicans to AmB and potentially other antifungal agents that may result from prior exposure to azoles in vitro or potentially in microenvironments in vivo that induce physiological changes may have major clinical implications.


Sign in / Sign up

Export Citation Format

Share Document