scholarly journals Correlation between concrete strength properties and surface electrical resistivity

2022 ◽  
Vol 15 (1) ◽  
Author(s):  
Carla Cavalcante Araújo ◽  
Gibson Rocha Meira
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Electrical Resistivity ◽  
Concrete Strength ◽  
Strength Properties ◽  
Splitting Tensile Strength ◽  
Test Parameters ◽  
Periodic Inspections ◽  
The Relationship ◽  
Non Destructive

abstract: Periodic inspections in reinforced concrete structures are important to be carried out to assess their state of conservation. In this scenario, non-destructive tests can be a suitable option since destructive tests are invasive and may be difficult to be performed in some cases. Considering this option, correlations between non-destructive test parameters and the concrete properties to be analyzed are useful tools that make easier the structure inspection. In the present work, correlations between the compressive strength (fc) and splitting tensile strength (ft) and surface electrical resistivity (ρ) of concretes were studied. Brazilian concretes of six different mixtures were analyzed at five different ages and correlation curves between strength properties and surface electrical resistivity of concrete were obtained, which are represented by the general relationships fc= 14.18·ln(ρ) + 18.43 and ft = 0.69·ln(ρ) + 2.15 for compressive strength and splitting tensile strength, respectively. In addition, a general curve considering literature data and results from this work was proposed to represent the relationship between compressive strength and surface electrical resistivity - fc = 11.89·ln(ρ) + 18.90.

scholarly journals Strength properties of high-performance concretes with carbonate coarse aggregate

2011 ◽  
Vol 9 (2) ◽  
pp. 069-076
Author(s):  
Jacek Góra
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
High Performance ◽  
Coarse Aggregate ◽  
High Performance Concrete ◽  
Concrete Strength ◽  
Strength Properties ◽  
Splitting Tensile Strength ◽  
Coarse Aggregates

High performance concretes were tested to find an effect of the three different coarse aggregates (basalt, granite and dolomite) on concrete strength properties. All the results were analyzed statistically. Splitting tensile strength of high performance concrete with dolomite aggregate was significantly higher than that of concretes with basalt and granite aggregate. The effect of dolomite aggregate on compressive strength of HPC was much more advantageous than that of granite aggregate.

scholarly journals AN INVESTIGATION ON THE EFFECTS OF MICRO-PARAMETERS ON THE STRENGTH PROPERTIES OF ROCK

2021 ◽  
Vol 36 (1) ◽  
pp. 111-119
Author(s):  
Behzad Jafari Mohammadabadi ◽  
Kourosh Shahriar ◽  
Hossein Jalalifar ◽  
Kaveh Ahangari
Keyword(s):  
Mechanical Properties ◽  
Numerical Simulation ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Friction Coefficient ◽  
Critical Stress ◽  
Friction Angle ◽  
Strength Properties ◽  
Brazilian Tensile Strength ◽  
The Relationship

Rocks are formed from particles and the interaction between those particles controls the behaviour of a rock’s mechanical properties. Since it is very important to conduct extensive studies about the relationship between the micro-parameters and macro-parameters of rock, this paper investigates the effects of some micro-parameters on strength properties and the behaviour of cracks in rock. This is carried out by using numerical simulation of an extensive series of Uniaxial Compressive Strength (UCS) and Brazilian Tensile Strength (BTS) tests. The micro-parameters included the particles’ contact modulus, the contact stiff ness ratio, bond cohesion, bond tensile strength, the friction coefficient and the friction angle, and the mechanical properties of chromite rock have been considered as base values of the investigation. Based on the obtained results, it was found that the most important micro-parameters on the behaviour of rock in the compressive state are bond cohesion, bond tensile strength, and the friction coefficient. Also, the bond tensile strength showed the largest effect under tensile conditions. The micro-parameter of bond tensile strength increased the rock tensile strength (up to 5 times), minimized destructive cracks and increased the corresponding strain (almost 2.5 times) during critical stress.

Research on Strength Properties of Concrete Using Aggregates from Repeatedly Recycling Concrete Waste

2014 ◽  
Vol 665 ◽  
pp. 147-150 ◽  
Author(s):  
Ping Hua Zhu ◽  
Yi Lei
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Coarse Aggregate ◽  
Strength Properties ◽  
Splitting Tensile Strength ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Fine Aggregate ◽  
Replacement Ratio ◽  
Design Strength

The strength properties of recycled aggregate concrete (RAC) using aggregates from repeatedly recycling concrete waste were studied. The relationships between cube compressive strength and splitting tensile strength and between each strength and replacement ratio of recycled aggregate to natural aggregate were established. The results showed that the strength properties of RAC with the design strength of 30MPa can be satisfied when the quality of recycled coarse and fine aggregates met respectively the needs of Grade II in GB/T25177-2010 and Grade III in GB/T25176-2010, with the replacement ratio to natural coarse aggregate and natural fine aggregate no more than 70% and 50%. Both strengths decreased and then increased for a while before descending again with increasing replacement ratio of recycled coarse aggregate, and decreased continuously with the increase of replacement ratio of recycled fine aggregate. The relationship between cube compressive strength and splitting tensile strength of RAC was found to be exponential function.

scholarly journals The Relation Tensile Strength And Flexibility Of Bamboo For Soil Stabilization

2021 ◽  
Vol 4 (1) ◽  
pp. 11
Author(s):  
Khoiriya Latifah ◽  
Joko Siswanto ◽  
Bambang Supriyadi ◽  
Carsoni C
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Soil Stabilization ◽  
Strength Properties ◽  
High Compressive Strength ◽  
Maximum Tensile Strength ◽  
The World ◽  
Bamboo Fibers ◽  
The Relationship

Bamboo is an abundant material and easily available in Indonesia. In addition to having high compressive strength and tensile strength as well as ease of obtaining and low prices, bamboo is a consideration and focus in developing in the world of construction today. In this study, bamboo is used for soil stabilization, where bamboo is used in the form of fibre. This research focuses on the strength properties of various types of bamboo. The focus is to investigate the relationship between the maximum tensile strength of bamboo and the flexibility of bamboo in soil stabilization. This is very important, because bamboo fibers used for soil stabilization rely on their tensile strength rather than their compressive strength. Thus, the optimum tensile strength and flexibility of bamboo must be of particular concern. From the results of the study of the tensile strength of two types of bamboo, namely Apus Bamboo and Java Bamboo, the Apus Bamboo results were found to have a higher tensile strength of 225.57 mpa with maximum flexibility of 19.99 mm and 43.76 mpa for tensile strength of Javanese Bamboo with a level of flexibility of 10.26 mm.

Experimental Research on the Relationship between Splitting Tensile Strength and Compressive Strength of Ceramisite Concrete

2011 ◽  
Vol 374-377 ◽  
pp. 1434-1437 ◽  
Author(s):  
Wei Jun Yang ◽  
Peng Wang
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Size Effect ◽  
Experimental Research ◽  
Splitting Tensile Strength ◽  
Axial Compressive Strength ◽  
The Relationship

Ceramisite concrete was charateristic of size effect as common concret. Through the experimentation of size effect on cubic compressive strength and axial compressive strength,and analysed and research coefficient of size effect by classical theoretics,elicit size effect of ceramisite concrete.

scholarly journals Evaluation of Concrete Material Properties at Early Age

CivilEng ◽  
2020 ◽  
Vol 1 (3) ◽  
pp. 326-350
Author(s):  
Osamah Obayes ◽  
Emad Gad ◽  
Tilak Pokharel ◽  
Jessey Lee ◽  
Kamiran Abdouka
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Fracture Energy ◽  
Material Properties ◽  
Modulus Of Elasticity ◽  
Inverse Analysis ◽  
Splitting Tensile Strength ◽  
Early Age ◽  
Concrete Compressive Strength ◽  
The Relationship

This article investigates the development of the following material properties of concrete with time: compressive strength, tensile strength, modulus of elasticity, and fracture energy. These properties were determined at seven different hydration ages (18 h, 30 h, 48 h, 72 h, 7 days, 14 days, 28 days) for four pure cement concrete mixes totaling 336 specimens tested throughout the study. Experimental data obtained were used to assess the relationship of the above properties with the concrete compressive strength and how these relationships are affected with age. Further, this study investigates prediction models available in literature and recommendations are made for models that are found suitable for application to early age concrete. Results obtained indicate that the relationship between the splitting tensile strength and concrete compressive strength can be approximated with a power function between 0.7 and 0.8, and this correlation is not affected by age. Fracture energy of the concrete and modulus of elasticity values obtained in this study correlate well with the square root of the compressive strength and it was found that this relationship holds true for all hydration ages investigated in this paper. Inverse analysis on the wedge-splitting test was conducted to determine the direct tensile strength. Values of tensile strength obtained from the inverse analysis have been validated numerically by carrying out finite element analysis on the wedge split, and anchor pull-out tests. The ratio of the tensile strength obtained from the inverse analysis to the splitting tensile strength was found to be in the range of 0.5–0.9 and 0.7 on average.

scholarly journals Correlation between the Compressive, Tensile Strength of Old Concrete under Marine Environment and Prediction of Long-Term Strength

2017 ◽  
Vol 2017 ◽  
pp. 1-12 ◽  
Author(s):  
Weilai Yao ◽  
Shiyong Jiang ◽  
Wei Fei ◽  
Tao Cai
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Marine Environment ◽  
Concrete Strength ◽  
Exponential Model ◽  
Experimental Result ◽  
Term Strength ◽  
Two Parameters ◽  
The Relationship

Compressive strength and tensile strength are important mechanical properties of concrete. The long-term strength of concrete under real service environment is an important parameter when evaluating existing buildings, which should also be properly considered in structural design. In this study, the relationship between compressive and splitting tensile strength of old concrete existing for long period under marine environment was investigated. At a deserted harbour, concrete cores samples were drilled by pairs in site. For each pair of samples, the two cores were drilled from the adjacent location and conducted to compressive, splitting tensile test, respectively. 48 compressive and splitting tensile strengths were finally obtained. From the test results, tensile strength presents general uptrend with compressive strength, and the two parameters are well positively correlated. Exponential model generally recommended by building codes or literatures is still capable of describing the relationship between compressive and tensile strength of old deteriorated concrete, when function parameters are properly determined. Based on statistical theory and the experimental result of this study, a method for predicting long-term tensile strength of concrete is developed and an example is given, which may provide a potential way to estimate long-term concrete strength under real marine environment.

scholarly journals Experimental Study on the Mechanical Properties of Amorphous Alloy Fiber-Reinforced Concrete

2018 ◽  
Vol 2018 ◽  
pp. 1-9 ◽  
Author(s):  
Chaohua Jiang ◽  
Yizhi Wang ◽  
Wenwen Guo ◽  
Chen Jin ◽  
Min Wei
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
Amorphous Alloy ◽  
Flexural Strength ◽  
Concrete Strength ◽  
Splitting Tensile Strength ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced

With great mechanical properties and corrosion resistance, amorphous alloy fiber (AAF) is a highly anticipated material in the fiber-reinforced concrete (FRC) field. In this study, the mechanical properties of AAFRC such as compressive strength, tensile strength, and flexural strength were examined. The comparison and analysis between AAFRC and steel fiber-reinforced concrete (SFRC) were also carried out. The results show that adding fibers significantly improves the concrete strength and toughness index. Compared with plain concrete, the compressive strength, splitting tensile strength, and flexural strength of AAFRC increase by 8.21–16.72%, 10.4–32.8%, and 18.12–45.21%, respectively. Meanwhile, the addition of AAF with a greater tensile strength and larger unit volume quantity improves the splitting tensile strength and flexural strength of concrete more noticeably than that of SF. Adding AAF improves the ductility of concrete more significantly in comparison to the SF. AAFRC shows great interfacial bonding performance as well. A prediction equation for the strength of AAFRC was proposed, which verified good accuracy calibrated based on the test results.

Abrasion Depth-Mechanical Properties Relations of Low-Cost PVA Engineered Cementitious Composites

2020 ◽  
Vol 30 ◽  
pp. 55-62
Author(s):  
Nadheer S. Ayoob ◽  
Yasir H. Daek ◽  
Ali N. Hilo ◽  
Sallal R. Abid
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Elastic Energy ◽  
Low Cost ◽  
Splitting Tensile Strength ◽  
Modulus Of Rupture ◽  
Bending Tests ◽  
Four Point Bending ◽  
Pva Fiber ◽  
The Relationship

Five engineered cementitious composite mixtures were adopted in this study with five different contents of 0, 0.5, 1.0, 1.5 and 2.0% of untreated low cost PVA fiber. Four different test specimens were prepared from the five mixtures to conduct several tests. Abrasion tests were conducted using 300 mm discs for six time steps each of 12 hours, while 100 mm cubes were used to evaluate the compressive strength. Cylinders with 100 mm diameter and 200 mm depth were adopted for splitting tensile strength, while four-point bending tests were conducted using small concrete beams with a span of 210 mm. The modulus of rupture was calculated from the tested beams, while the stiffness and elastic energy were calculated based on the load and deflection records of the beams. The tests showed that compressive strength did not affected noticeably by fiber inclusion, while all other mechanical quantities in addition to abrasion resistance exhibited significant improvement due to PVA fiber effect. The stiffness, splitting tensile strength, modulus of rupture and elastic energy exhibited maximum developments of 45, 134, 287 and 1181%, respectively, due fiber addition to the mixture. Quadratic formulas were found to be very accurate to correlate the relationship between abrasion depth in millimeters and each of splitting tensile strength, modulus of rupture and elastic energy, where R2 values of these relations were between 96.7 and 99.5%.

Sign in / Sign up

Export Citation Format

Share Document