scholarly journals BIOSYNTHESIS AND CHARACTERIZATION OF GOLD NANOPARTICLES AND THEIR INTERACTION STUDY WITH METFORMIN

2020 ◽  
Vol 21 (2) ◽  
pp. 56
Author(s):  
Dian Anggraini ◽  
Siti Suhartati ◽  
Iwan Syahjoko Saputra ◽  
Sudirman Sudirman
Keyword(s):  
Particle Size ◽  
Gold Nanoparticles ◽  
Leaf Extract ◽  
Average Particle Size ◽  
Synthesis Method ◽  
Spherical Shape ◽  
Imperata Cylindrica ◽  
Average Particle ◽  
Interaction Study

BIOSYNTHESIS AND CHARACTERIZATION OF GOLD NANOPARTICLES AND THEIR INTERACTION STUDY WITH METFORMIN. Synthesis of gold nanoparticles successfully carried using Imperata cylindrica L leaf extract. In this study, the approach used through green synthesis method is a reaction betwen of the HAuCl4 solution (concentration variation as 3; 5; 7 x 10-4 M) with Imperata cylindrica L leaf extract. Results of UV-Vis showed of gold nanoparticles has a maximum wavelength at 530 nm with absorbance value of 1.4. Results of FTIR shows a shift the absorption peak at wavenumber of 3392 cm-1 to 3404 cm-1. PSA and PZC showed the distribution of gold nanoparticles was 48.84 nm with a charge of 20.5 mV. Gold nanoparticles has a spherical shape and an average particle size of 20 nm which can be seen from the results of the characterization using TEM. XRD showed crystalize size average of gold nanoparticles as 20.47 nm. The interaction between of gold nanoparticles with metformin can be seen in the absorbance decrease of 0.38 at a wavelength of 531 nm and the results of PSA shows an average particle size of AuNPs@metformin is 122 nm. From the characterization data can be concluded the gold nanoparticles were successfully synthesized using natural bioreductors by utilizing secondary metabolites from Imperata cylindrica L leaf extract.

Synthesis and Characterization of Water-Soluble Monolayer-Protected Gold Nanoparticles

2011 ◽  
Vol 415-417 ◽  
pp. 617-620 ◽  
Author(s):  
Yan Su ◽  
Ying Yun Lin ◽  
Yu Li Fu ◽  
Fan Qian ◽  
Xiu Pei Yang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Particle Size ◽  
Gold Nanoparticles ◽  
Average Particle Size ◽  
Water Soluble ◽  
Synthesis And Characterization ◽  
Average Particle ◽  
Transmission Electron

Water-soluble gold nanoparticles (AuNPs) were prepared using 2-mercapto-4-methyl-5- thiazoleacetic acid (MMTA) as a stabilizing agent and sodium borohydride (NaBH4) as a reducing agent. The AuNPs product was analyzed by transmission electron microscopy (TEM), UV-vis absorption spectroscopy and Fourier transform infrared spectroscopy (FTIR). The TEM image shows that the particles were well-dispersed and their average particle size is about 5 nm. The UV-vis absorption and FTIR spectra confirm that the MMTA-AuNPs was stabilized by the carboxylate ions present on the surface of the AuNPs.

Preparation and Characterization of Gold Nanoparticles in the Presence of Citrate and Soybean Seed Extract in an Acidic Conditions

Drug Research ◽  
2017 ◽  
Vol 67 (05) ◽  
pp. 266-270 ◽  
Author(s):  
Ebrahim Izadi ◽  
Ali Rasooli ◽  
Abolfazl Akbarzadeh ◽  
Soodabeh Davaran
Keyword(s):  
Particle Size ◽  
Gold Nanoparticles ◽  
Size Distribution ◽  
Average Particle Size ◽  
Soybean Seed ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Soybean Extract ◽  
Average Size

AbstractThrough the present study, an eco-friendly method was used to synthesize the gold nanoparticles (GNPs) by using the sodium citrate and extract of the soybean seed as reducing the agents at PH 3. X-Ray diffraction (XRD) method was used to evaluate the crystal structure of as-synthesized NPs and it’s revealed that this method leads to well crystallized GNPs. In order to determine the particle size and their distribution, field emission scanning microscopy (FE-SEM) and dynamic light scattering (DLS) were used. The results showed that, the average particle size distribution of synthesized GNPs in solutions containing of the soybean extract and 1% citrate at PH 3 is about 109.6 and 140.9 nm, respectively. Also, we find that the average size of GNPs is 40 and 33 nm from solutions of citrate and soybean extract, respectively. It was concluded that using the extract of soybean seeds as reducing agent can lead to GNPs with small size and narrow size distribution.

scholarly journals EFFECT OF CONCENTRATION OF IMPERATA CYLINDRICA L LEAF EXTRACT ON SYNTHESIS PROCESS OF GOLD NANOPARTICLES

2018 ◽  
Vol 19 (2) ◽  
pp. 72
Author(s):  
Iwan Syahjoko Saputra ◽  
Yoki Yulizar ◽  
Sudirman Sudirman
Keyword(s):  
Particle Size ◽  
Gold Nanoparticles ◽  
Leaf Extract ◽  
Synthesis Method ◽  
Ion Source ◽  
Imperata Cylindrica ◽  
Hydroxyl Group ◽  
Synthesis Process ◽  
Tem Analysis ◽  
Ft Ir

Gold Nanoparticles (GoldNPs) successful was performed using HAuCl4 precursor as Au3+ ion source with 7x10-4 M concentration. The research aims to knows effect of concentration variation of Imperata cylindrica L leaf extract on synthesis process of gold nanoparticles. The research used of green synthesis method. Colloid of nanoparticles which is formed in analyzed using UV-Vis Spectrophotometer, FT-IR Spectroscopy, PSA, PZC, XRD and TEM. The results of synthesis showed the best concentration of Imperata cilindrica L leaf extract at 3,46%, happen a shift of wavelength at UV-Vis from 216 nm to 530 nm with 1.779 absorbance value. The PSA analysis showed a particle size of 51.87 nm and a PZC value of -19.2 mV. The result of FT-IR indicated a shift of wavenumber in the hidroxyl group from 3354 cm-1 to 3390 cm-1 and showed a interaction of hydroxyl group at imperata cylindrica L leaf extract with Au3+ ion. TEM analysis shows the morphology of GoldNPs that spherical shape with a particle size of 20 nm. XRD calculation results show crystallite size of gold nanoparticles is 15.47 nm.

Preparation ZnO nanoparticles with Different Concentration by Laser Ablation in Liquid

2021 ◽  
Vol 39 (1B) ◽  
pp. 197-202
Author(s):  
Ghufran S. Jaber ◽  
Khawla S. Khashan ◽  
Maha J. Abbas
Keyword(s):  
Particle Size ◽  
Laser Ablation ◽  
Laser Pulse ◽  
Laser Energy ◽  
Average Particle Size ◽  
Spherical Shape ◽  
Pulse Number ◽  
Average Particle ◽  
Zno Nps ◽  
Laser Ablation In Liquid

The effects of varying laser pulse numbers on the fabricated of ZnONPs by pulsed laser ablation in deionized water of Zn-metal are investigated. The Nd: YAG laser at energy 600mJ prepared three samples by change the laser pulse number (100, 150, and 200). The results were collected and examined using an electron scanning microscope, XRD – diffraction, and transmission electron microscope. The result revealed the colloidal spherical shape and the homogeneous composition of the ZnO NPs. The nanoparticles resulted in different concentrations and sized distributions by changing the pulse number of a laser. The average particle size and the mass concentration of particle size increase with an increasing number of laser pulses by fixed the laser energy.

scholarly journals Sintesis Nanopartikel Perak Menggunakan Ekstrak Daun Kluwak Pangium edule Reinw Sebagai Bioreduktor dan Uji Aktivitasnya Sebagai Antioksidan

2019 ◽  
Vol 10 (1) ◽  
Author(s):  
Indrawati Patabang ◽  
Syahruddin Kasim ◽  
Paulina Taba
Keyword(s):  
Antioxidant Activity ◽  
Particle Size ◽  
Silver Nanoparticles ◽  
Leaf Extract ◽  
Average Particle Size ◽  
Xrd Analysis ◽  
Average Particle ◽  
Result Show ◽  
Ic50 Values ◽  
Show Result

Silver nanoparticles have been synthesized using kluwak leaf extract (Pangium edule Reinw) as bioreductor and antioxidant activity assay. The nanoparticles formed were monitored by observing UV-Vis absorption and characterized by using FTIR, PSA, XRD and SEM instruments. The result of functional group characterization with FTIR show that the functional groups OH, C = O, C-O and CH2 act as Ag+ reducing agent. The size of silver nanoparticles was determined by using Particle Size Analyzer (PSA) and the result show average particle size distribution of 93.2 nm. Morphology of AgNp were observed by Scanning Electron Microscope (SEM) and X-Ray Difraction (XRD) analysis show result of 51,78 nm. The antioxidant activity was shown by in kluwak leaf extract and silver nanoparticles with IC50 values respectively 831,33 ppm dan 1493,09 ppm.

scholarly journals Preparation and characterization of domperidone nanoparticles for dissolution improvement

2018 ◽  
Vol 27 (1) ◽  
pp. 39-52
Author(s):  
Mohammed Sabar Al-lami ◽  
Malath H. Oudah ◽  
Firas A. Rahi
Keyword(s):  
Particle Size ◽  
Average Particle Size ◽  
In Vitro Release ◽  
Methyl Cellulose ◽  
Precipitation Method ◽  
Average Particle ◽  
Antisolvent Precipitation ◽  
Stirring Time

This study was carried out to prepare and characterize domperidone nanoparticles to enhance solubility and the release rate. Domperidone is practically insoluble in water and has low and an erratic bioavailability range from 13%-17%. The domperidone nanoparticles were prepared by solvent/antisolvent precipitation method at different polymer:drug ratios of 1:1 and 2:1 using different polymers and grades of poly vinyl pyrolidone, hydroxy propyl methyl cellulose and sodium carboxymethyl cellulose as stabilizers. The effect of polymer type, ratio of polymer:drug, solvent:antisolvent ratio, stirring rate and stirring time on the particle size, were investigated and found to have a significant (p? 0.05) effect on particle size. The best formula was obtained with lowest average particle size of 84.05. This formula was studied for compatibility by FTIR and DSC, surface morphology by FESEM and crystalline state by XRPD. Then domperidone nanoparticles were formulated into a simple capsule dosage form in order to study of the in vitro release of drug from nanoparticles in comparison raw drug and mixture of polymer:drug ratios of 2:1. The release of domperidone from best formula was highly improved with a significant (p? 0.05) increase.

scholarly journals Effect of the polymeric coating over Fe3O4 particles used for magnetic separation

2010 ◽  
Vol 8 (5) ◽  
pp. 1041-1046 ◽  
Author(s):  
Raúl Reza ◽  
Carlos Martínez Pérez ◽  
Claudia Rodríguez González ◽  
Humberto Romero ◽  
Perla García Casillas
Keyword(s):  
Particle Size ◽  
Magnetite Nanoparticles ◽  
Average Particle Size ◽  
Spherical Shape ◽  
Polymeric Coating ◽  
Average Particle ◽  
Synthesis Conditions ◽  
Aging Conditions ◽  
Magnetite Particles ◽  
Average Size

AbstractIn this work, the synthesis of magnetite nanoparticles by two variant chemical coprecipitation methods that involve reflux and aging conditions was investigated. The influence of the synthesis conditions on particle size, morphology, magnetic properties and protein adsorption were studied. The synthesized magnetite nanoparticles showed a spherical shape with an average particle size directly influenced by the synthesis technique. Particles of average size 27 nm and 200 nm were obtained. When the coprecipitation method was used without reflux and aging, the smallest particles were obtained. Magnetite nanoparticles obtained from both methods exhibited a superparamagnetic behavior and their saturation magnetization was particle size dependent. Values of 67 and 78 emu g−1 were obtained for the 27 nm and 200 nm magnetite particles, respectively. The nanoparticles were coated with silica, aminosilane, and silica-aminosilane shell. The influence of the coating on protein absorption was studied using Bovine Serum Albumin (BSA) protein.

Preparation and Particle Size Characterization of Cu Nanoparticles Prepared by Anodic Arc Plasma

2010 ◽  
Vol 92 ◽  
pp. 163-169
Author(s):  
Hong Xia Qiao ◽  
Zhi Qiang Wei ◽  
Ming Ru Zhou ◽  
Zhong Mao He
Keyword(s):  
Crystal Structure ◽  
Particle Size ◽  
Specific Surface ◽  
Size Distribution ◽  
Surface Area ◽  
Specific Surface Area ◽  
Average Particle Size ◽  
Spherical Shape ◽  
Average Particle ◽  
Uniform Size

Copper nanoparticles were successfully prepared in large scales by means of anodic arc discharging plasma method in inert atmosphere. The particle size, specific surface area, crystal structure and morphology of the samples were characterized by X-ray diffraction (XRD), BET equation, transmission electron microscopy (TEM) and the corresponding selected area electron diffraction (SAED). The experiment results indicate that the crystal structure of the samples is fcc structure as same as that of the bulk materials. The specific surface area is is 11 m2/g, with the particle size distribution ranging from 30 to 90 nm, the average particle size about 67nm obtained from TEM and confirmed from XRD and BET results. The nanoparticles have uniform size, higher purity, narrow size distribution and spherical shape can be prepared by this convenient and effective method.

The Aggregation Study and Characterization of Silver Nanoparticles

2017 ◽  
Vol 263 ◽  
pp. 165-169
Author(s):  
Silvia Chowdhury ◽  
Faridah Yusof ◽  
Nadzril Sulaiman ◽  
Mohammad Omer Faruck
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Particle Size ◽  
Silver Nanoparticles ◽  
Absorption Spectrum ◽  
Average Particle Size ◽  
Average Particle ◽  
Transmission Electron ◽  
Vis Spectroscopy

In this article, we have studied the process of silver nanoparticles (AgNPs) aggregation and to stop aggregation 0.3% Polyvinylpyrrolidone (PVP) was used. Aggregation study carried out via UV-vis spectroscopy and it is reported that the absorption spectrum of spherical silver nanoparticles were found a maximum peak at 420 nm wavelength. Furthermore, Transmission Electron Microscopy (TEM) were used to characterized the size and shape of AgNPs, where the average particle size is around 10 to 25 nm in diameter and the AgNPs shape is spherical. Next, Dynamic Light Scattering (DLS) were used, owing to observed size distribution and self-correlation of AgNPs.

scholarly journals Synthesis and characterization of the aluminium phosphates modified with ammonium, calcium and molybdenum by hydrothermal method

2016 ◽  
Vol 18 (2) ◽  
pp. 131-139
Author(s):  
Kinga Łuczka ◽  
Barbara Grzmil ◽  
Bogumił Kic ◽  
Krzysztof Kowalczyk
Keyword(s):  
Particle Size ◽  
Physicochemical Parameters ◽  
Average Particle Size ◽  
Synthesis And Characterization ◽  
Average Particle ◽  
Influence Of Process Parameters ◽  
Molar Ratios ◽  
Aluminum Phosphates ◽  
The Individual

Abstract Synthesis and characterization of the aluminum phosphates modified with ammonium, calcium and molybdenum were conducted. The influence of process parameters (reactive pressure and molar ratios) in the reaction mixture were studied. The contents of the individual components in the products were in the range of: 10.97–17.31 wt% Al, 2.65–13.32 wt% Ca, 0.70–3.11 wt% Mo, 4.36–8.38 wt% NH3, and 35.12–50.54 wt% P2O5. The materials obtained in the experiments were characterized by various physicochemical parameters. The absorption oil number was in the range from 67 to 89 of oil/100 g of product, the surface area was within the range of 4–76 m2/g, whereas the average particle size of products reached 282–370 nm. The Tafel tests revealed comparable anticorrosive properties of aluminum phosphates modified with ammonium, calcium, molybdenum in comparison with commercial phosphate.

Sign in / Sign up

Export Citation Format

Share Document