Computer Models of Pem Fuel Cells for the Study of Transient Modes in Electrical Power Supply Complexes

2021 ◽  
Vol 64 (3) ◽  
pp. 60-67
Author(s):  
Ivan Vasyukov ◽  
Keyword(s):  
Fuel Cells ◽  
Fuel Cell ◽  
Dynamic Response ◽  
Gradient Descent ◽  
Eddy Currents ◽  
Least Squares Method ◽  
Electrical Power ◽  
Computer Models ◽  
Pem Fuel Cells ◽  
Current Voltage

Static and dynamic computer models of fuel cells are considered. A static model is determined that most ac-curately reproduces the current-voltage characteristic of a real fuel cell. A method for tuning it according to the experimental I - V characteristic by the least squares method is proposed. A method for its adjustment ac-cording to the experimental I - V characteristic by the method of gradient descent is proposed. A modified elec-trical equivalent circuit of a fuel cell has been developed, which simulates its dynamic response, taking into ac-count the damping effect of eddy currents during operation of a stack of fuel cells on a pulse voltage converter. A method is proposed for determining the parameters of the model from the experimental oscillograms of the current and voltage of the stack. A universal model of a stack of fuel cells in LTspice has been developed, which makes it possible to simulate a dynamic response and, if necessary, simulate a real static I – V characteristic of the stack.

PVD Coated Bipolar Plates for PEM Fuel Cells

2005 ◽  
Vol 2 (4) ◽  
pp. 290-294 ◽  
Author(s):  
Shuo-Jen Lee ◽  
Ching-Han Huang ◽  
Yu-Pang Chen ◽  
Chen-Te Hsu
Keyword(s):  
Corrosion Resistance ◽  
Fuel Cells ◽  
Fuel Cell ◽  
Physical Vapor Deposition ◽  
Corrosion Current ◽  
Pem Fuel Cells ◽  
Bipolar Plates ◽  
Coating Materials ◽  
Pvd Coating ◽  
Simulated Fuel

Aluminum was considered a good candidate material for bipolar plates of the polymer electrolyte membrane (PEM) fuel cells due to its low cost, light weight, high strength and good manufacturability. But there were problems of both chemical and electrochemical corrosions in the PEM fuel cell operating environment. The major goals of this research are to find proper physical vapor deposition (PVD) coating materials which would enhance surface properties by making significant improvements on corrosion resistance and electrical conductivity at a reasonable cost. Several coating materials had been studied to analyze their corrosion resistance improvement. The corrosion rates of all materials were tested in a simulated fuel cell environment. The linear polarization curve of electrochemical method measured by potentiostat instrument was employed to determine the corrosion current. Results of the corrosion tests indicated that all of the coating materials had good corrosion resistance and were stable in the simulated fuel cell environment. The conductivities of the coated layers were better and the resistances changed very little after the corrosion test. At last, single fuel cells were made by each PVD coating material. Fuel cell tests were conducted to determine their performance w.r.t. that was made of graphite. The results of fuel cell tests indicated that metallic bipolar plates with PVD coating could be used in PEM fuel cells.

Analytical and numerical study on cooling flow field designs performance of PEM fuel cell with variable heat flux

2016 ◽  
Vol 30 (16) ◽  
pp. 1650155 ◽  
Author(s):  
Ebrahim Afshari ◽  
Masoud Ziaei-Rad ◽  
Nabi Jahantigh
Keyword(s):  
Heat Flux ◽  
Fuel Cells ◽  
Fuel Cell ◽  
Pressure Drop ◽  
Flow Field ◽  
Pem Fuel Cells ◽  
Coolant Flow ◽  
Temperature Uniformity ◽  
Variable Heat ◽  
Variable Heat Flux

In PEM fuel cells, during electrochemical generation of electricity more than half of the chemical energy of hydrogen is converted to heat. This heat of reactions, if not exhausted properly, would impair the performance and durability of the cell. In general, large scale PEM fuel cells are cooled by liquid water that circulates through coolant flow channels formed in bipolar plates or in dedicated cooling plates. In this paper, a numerical method has been presented to study cooling and temperature distribution of a polymer membrane fuel cell stack. The heat flux on the cooling plate is variable. A three-dimensional model of fluid flow and heat transfer in cooling plates with 15 cm × 15 cm square area is considered and the performances of four different coolant flow field designs, parallel field and serpentine fields are compared in terms of maximum surface temperature, temperature uniformity and pressure drop characteristics. By comparing the results in two cases, the constant and variable heat flux, it is observed that applying constant heat flux instead of variable heat flux which is actually occurring in the fuel cells is not an accurate assumption. The numerical results indicated that the straight flow field model has temperature uniformity index and almost the same temperature difference with the serpentine models, while its pressure drop is less than all of the serpentine models. Another important advantage of this model is the much easier design and building than the spiral models.

Effect of Vibration on the Liquid Water Transport of PEM Fuel Cells

2009 ◽  
Author(s):  
Luis Breziner ◽  
Peter Strahs ◽  
Parsaoran Hutapea
Keyword(s):  
Fuel Cells ◽  
Fuel Cell ◽  
Water Transport ◽  
Liquid Water ◽  
Pem Fuel Cells ◽  
Gas Diffusion ◽  
Cell Performance ◽  
Sinusoidal Vibration ◽  
Fuel Cell Performance ◽  
Liquid Water Transport

The objective of this research is to analyze the effects of vibration on the performance of hydrogen PEM fuel cells. It has been reported that if the liquid water transport across the gas diffusion layer (GDL) changes, so does the overall cell performance. Since many fuel cells operate under a vibrating environment –as in the case of automotive applications, this may influence the liquid water concentration across the GDL at different current densities, affecting the overall fuel cell performance. The problem was developed in two main steps. First, the basis for an analytical model was established using current models for water transport in porous media. Then, a series of experiments were carried, monitoring the performance of the fuel cell for different parameters of oscillation. For sinusoidal vibration at 10, 20 and 50Hz (2 g of magnitude), a decrease in the fuel cell performance by 2.2%, 1.1% and 1.3% was recorded when compared to operation at no vibration respectively. For 5 g of magnitude, the fuel cell reported a drop of 5.8% at 50 Hz, whereas at 20 Hz the performance increased by 1.3%. Although more extensive experimentation is needed to identify a relationship between magnitude and frequency of vibration affecting the performance of the fuel cell as well as a throughout examination of the liquid water formation in the cathode, this study shows that sinusoidal vibration, overall, affects the performance of PEM fuel cells.

Fuel-Cell Hybrid Systems to Generate Shipboard Electrical Power

2009 ◽  
Author(s):  
W. J. Sembler ◽  
S. Kumar
Keyword(s):  
Fuel Cells ◽  
Fuel Cell ◽  
Air Quality ◽  
Hybrid Systems ◽  
Hybrid System ◽  
Cell Hybrid ◽  
Electrical Power ◽  
History Of ◽  
Marine Applications ◽  
Fuel Cell Hybrid

The reduction of shipboard airborne emissions has been receiving increased attention due to the desire to improve air quality and reduce the generation of greenhouse gases. The use of a fuel cell could represent an environmentally friendly way for a ship to generate in-port electrical power that would eliminate the need to operate diesel-driven generators or use shore power. This paper includes a brief description of the various types of fuel cells in use today, together with a review of the history of fuel cells in marine applications. In addition, the results of a feasibility study conducted to evaluate the use of a fuel-cell hybrid system to produce shipboard electrical power are presented.

scholarly journals STEADY-STATE MODELLING OF PEM FUEL CELLS USING GRADIENT-BASED OPTIMIZER

10.6036/10099 ◽  
2021 ◽  
Vol DYNA-ACELERADO (0) ◽  
pp. [ 8 pp.]-[ 8 pp.]
Author(s):  
SALAH KAMAL ◽  
ATTIA EL-FERGANY ◽  
EHAB EHAB ELSAYED ELATTAR ◽  
AHMED AGWA
Keyword(s):  
Fuel Cells ◽  
Steady State ◽  
Fuel Cell ◽  
Optimization Problem ◽  
Pem Fuel Cells ◽  
Test Cases ◽  
Uncertain Parameters ◽  
Gradient Based ◽  
High Degree ◽  
Exchange Membrane

The accuracy of fuel cell (FC) models is important for the further numerical simulations and analysis at several conditions. The electrical (I-V) characteristic of the polymer exchange membrane fuel cells (PEMFCs) has high degree of nonlinearity comprising uncertain seven parameters as they aren’t given in fabricator's datasheets. These seven parameters need to be obtained to have the PEMFC model in order. This research addresses an up-to-date application of the gradient-based optimizer (GBO) to generate the best estimated values of such uncertain parameters. The estimation of these uncertain parameters is adapted as optimization problem having a cost function (CF) subjects to set of self-constrained limits. Three test cases of widely used PEMFCs units; namely, SR-12, 250-W module and NedStack PS6 to appraise the performance of the GBO are demonstrated and analyzed. The best values of the CF are 0.000142, 0.33598, and 2.10025 V2 for SR-12, 250-W module and NedStack PS6; respectively. Furthermore, the assessment of the GBO-based model is made by comparing its obtained results with the experiential results of these typical PEMFCs plus comparisons to other methods. At a due stage, many scenarios as a result of operating variations in regard to inlet regulation pressures and unit temperatures are performed. The copped reported results of the studied scenarios indicate the effectiveness of the GBO in establishing an accurate PEMFC model.

Fabrication and Performance Evaluation of Miniaturized Proton Exchange Membrane (PEM) Fuel Cells

2003 ◽  
Author(s):  
Tao Zhang ◽  
Pei-Wen Li ◽  
Qing-Ming Wang ◽  
Laura Schaefer ◽  
Minking K. Chyu
Keyword(s):  
Mass Transfer ◽  
Fuel Cells ◽  
Fuel Cell ◽  
Free Convection ◽  
Current Density ◽  
Pem Fuel Cells ◽  
Proton Exchange ◽  
Cathode Side ◽  
Ohmic Loss ◽  
Fuel Cell Performance

Two types of miniaturized PEM fuel cells are designed and characterized in comparison with a compact commercial fuel cell device in this paper. One has Nafion® membrane electrolyte sandwiched by two brass bipolar plates with micromachined meander-like gas channels. The cross-sectional area of the gas flow channel is approximately 250 by 250 (μm). The other uses the same Nafion® membrane and anode structure, but in stead of the brass plate, a thin stainless steel plate with perforated round holes is used at cathode side. The new cathode structure is expected to allow oxygen (air) being supplied by free-convection mass transfer. The characteristic curves of the fuel cell devices are measured. The activation loss and ohmic loss of the fuel cells have been estimated using empirical equations. Critical issues such as flow arrangement, water removing and air feeding modes concerning the fuel cell performance are investigated in this research. The experimental results demonstrate that the miniaturized fuel cell with free air convection mode is a simple and reliable way for fuel cell operation that could be employed in potential applications although the maximum achievable current density is less favorable due to limited mass transfer of oxygen (air). The relation between the fuel cell dimensions and the maximum achievable current density is also discussed with respect to free-convection mode of air feeding.

Analysis and Optimization of Transient Response of Polymer Electrolyte Fuel Cells

2015 ◽  
Vol 12 (1) ◽  
Author(s):  
A. Verma ◽  
R. Pitchumani
Keyword(s):  
Fuel Cells ◽  
Fuel Cell ◽  
Polymer Electrolyte ◽  
Transient Response ◽  
Single Channel ◽  
Rapid Change ◽  
Pem Fuel Cell ◽  
Pem Fuel Cells ◽  
Operating Parameters ◽  
Automotive Applications

Polymer electrolyte membrane (PEM) fuel cells are well suited for automotive applications compared to other types of fuel cells owing to their faster transient response and low-temperature operation. Due to rapid change in loads during automotive applications, study of dynamic behavior is of paramount importance. This study focuses on elucidating the transient response of a PEM fuel cell for specified changes in operating parameters, namely, voltage, pressure, and stoichiometry at the cathode and the anode. Transient numerical simulations are carried out for a single-channel PEM fuel cell to illustrate the response of power as the operating parameters are subjected to specified changes. These parameters are also optimized with an objective to match the power requirements of an automotive drive cycle over a certain period of time.

Artificial Neural Network Modeling of PEM Fuel Cells

2005 ◽  
Vol 2 (4) ◽  
pp. 226-233 ◽  
Author(s):  
Shaoduan Ou ◽  
Luke E. K. Achenie
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Fuel Cells ◽  
Fuel Cell ◽  
Back Propagation ◽  
Pem Fuel Cell ◽  
Pem Fuel Cells ◽  
Optimal Operating ◽  
Cell Systems ◽  
Artificial Neural

Artificial neural network (ANN) approaches for modeling of proton exchange membrane (PEM) fuel cells have been investigated in this study. This type of data-driven approach is capable of inferring functional relationships among process variables (i.e., cell voltage, current density, feed concentration, airflow rate, etc.) in fuel cell systems. In our simulations, ANN models have shown to be accurate for modeling of fuel cell systems. Specifically, different approaches for ANN, including back-propagation feed-forward networks, and radial basis function networks, were considered. The back-propagation approach with the momentum term gave the best results. A study on the effect of Pt loading on the performance of a PEM fuel cell was conducted, and the simulated results show good agreement with the experimental data. Using the ANN model, an optimization model for determining optimal operating points of a PEM fuel cell has been developed. Results show the ability of the optimizer to capture the optimal operating point. The overall goal is to improve fuel cell system performance through numerical simulations and minimize the trial and error associated with laboratory experiments.

Optimal Energy Dispatch Controller for Fuel Cell-Integrated Multi-Zone Building

2020 ◽  
Vol 1 (4) ◽  
Author(s):  
Yashen Lin ◽  
Venkatesh Chinde ◽  
Sen Huang
Keyword(s):  
Fuel Cells ◽  
Fuel Cell ◽  
Energy Savings ◽  
Electrical Power ◽  
Operating Cost ◽  
Potential Saving ◽  
Efficient Operation ◽  
Fuel Prices ◽  
Optimal Energy ◽  
Equipment Sizing

Abstract Stationary fuel cells provide potential opportunities for energy savings when integrated with buildings. Through smart dispatch of both electrical power and heat generated by the fuel cells and managing the building loads, the buildings can achieve more efficient operation. In this paper, we develop an optimal energy dispatch controller to operate a fuel cell-integrated building. The controller leverages the inherent thermal storage and the dispatchable fuel cell to reduce its operating cost and to allow the building to participate in grid services. The proposed controller is implemented on two types of commercial buildings, a large office building and a large hotel, and the effectiveness of the controller is demonstrated through simulations. The results also indicate that the potential saving varies significantly with different system parameters, including season, fuel prices, and equipment sizing, which provide helpful insights for building operators and other stake holders.

Sign in / Sign up

Export Citation Format

Share Document