scholarly journals Specific energy consumption of a Moringa oleifera seed shelling machine

2020 ◽  
Vol 66 (No. 3) ◽  
pp. 104-111
Author(s):  
Oluwaseyi Fadele ◽  
Ademola Afolabi ◽  
Dolapo Oloyede ◽  
Olufemi Adedire ◽  
Hafsat Bankole ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Specific Energy ◽  
Moringa Oleifera ◽  
Specific Energy Consumption ◽  
Large Seed ◽  
The Relationship ◽  
Moringa Oleifera Seed

In this work, the Specific Energy Consumption (SEC) and machine capacity for a Moringa oleifera seed shelling machine were determined in relation to the cylinder speed and seed sizes. A M. oleifera seed shelling machine was tested and the SEC was appraised. The SEC and machine capacity of the M. oleifera seed shelling machine were determined at five speed levels, viz. 200, 240, 280, 320 and 360 rpm using three seed sizes (viz. small, medium and large seed sizes). The SEC and machine capacity increased with the seed sizes during the shelling process. The same trend was observed for the relationship between the SEC and cylinder speed. The minimum values obtained for the SEC using the small, medium and large M. oleifera seed sizes were 31.25, 40.07 and 54.22 Wh·kg<sup>–1</sup>, respectively, at a cylinder speed of 200 rpm while the maximum values obtained for the small, medium and large seed sizes were 58.01, 74.37 and 100.63 Wh·kg<sup>–1</sup>, respectively, at a cylinder speed of 360 rpm. The optimum values obtained for the machine capacity were 14.58, 11.38 and 8.41 kg×h<sup>–1</sup> using the small, medium and large seed sizes, respectively. Conclusively, this study shows that the SEC and machine capacity were affected by the variation in the cylinder speed and seed sizes.

scholarly journals Physical, technological and technical characteristics of the blasted rock mass in terms of energy intensity of the processes

2021 ◽  
Vol 303 ◽  
pp. 01034
Author(s):  
Ivan Panachev ◽  
Ilya Kuznetsov ◽  
Anastasia Shirokolobova
Keyword(s):  
Rock Mass ◽  
Energy Consumption ◽  
Specific Energy ◽  
Energy Intensity ◽  
Coal Mines ◽  
Specific Energy Consumption ◽  
Rock Blasting ◽  
Mining Equipment ◽  
The Relationship

Kuzbass coal mines are equipped with powerful mining equipment; it is CME excavator type with bucket capacity from 4.6 m3 to 20 m3. To evaluate the efficiency of the excavation processes, a universal criterion was used – the value of specific energy consumption (kW h/m3). The dependences of excavator efficiency on the quality of rock blasting, estimated by the diameter of the average piece in the shot pile, are obtained. The relationship between the efficiency of excavators CME - 4.6, CME – 8, CME – 12.5, CME – 20, their energy intensity and the diameter of an average piece in the shot pile is determined.

scholarly journals Energy efficiency in the zeolite impact crushing plant of San Andrés (Holguín, Cuba)

DYNA ◽  
2015 ◽  
Vol 82 (193) ◽  
pp. 93-97
Author(s):  
José Ramón Hechavarría-Pérez ◽  
Alfredo L. Coello-Velazquez ◽  
Fernando Daniel Robles Proenza ◽  
Juan María Menendez-Aguado
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Specific Energy ◽  
Specific Energy Consumption ◽  
Operational Parameters ◽  
Impact Crushing ◽  
San Andres ◽  
Crushing Plant ◽  
The Impact ◽  
The Relationship

The present work deals with the impact crusher energy efficiency at San Andres Zeolitic Plant. Varying the operational parameters levels (rotor velocity, hammer row number and crusher capacity) were carried up two experimental series: First series was aimed to obtain the influence of the operational parameters on the power consumed by the crusher motor; the second series evaluated the crusher specific energy consumption behavior. First series empirical model obtained describes the influence of operational parameters on power consumption. Also the relationship among specific energy consumption and crusher speed and capacity were obtained. The most efficient operational regimen corresponded to 1100 rpm of the rotor velocity, 2 hammer row numbers and 15 t/h of crusher capacity.

Determination of grinding parameters of fenugreek seed

1970 ◽  
Vol 26 (1) ◽  
pp. 16 ◽  
Author(s):  
S Balasubramanian ◽  
Rajkumar Rajkumar ◽  
K K Singh
Keyword(s):  
Particle Size ◽  
Energy Consumption ◽  
Moisture Content ◽  
Specific Energy ◽  
Feed Rate ◽  
Average Particle Size ◽  
Specific Energy Consumption ◽  
Average Particle ◽  
Fenugreek Seeds ◽  
Fenugreek Seed

Experiment to identify ambient grinding conditions and energy consumed was conducted for fenugreek. Fenugreek seeds at three moisture content (5.1%, 11.5% and 17.3%, d.b.) were ground using a micro pulverizer hammer mill with different grinding screen openings (0.5, 1.0 and 1.5 mm) and feed rate (8, 16 and 24 kg h-1) at 3000 rpm. Physical properties of fenugreek seeds were also determined. Specific energy consumptions were found to decrease from 204.67 to 23.09 kJ kg-1 for increasing levels of feed rate and grinder screen openings. On the other hand specific energy consumption increased with increasing moisture content. The highest specific energy consumption was recorded for 17.3% moisture content and 8 kg h-1 feed rate with 0.5 mm screen opening. Average particle size decreased from 1.06 to 0.39 mm with increase of moisture content and grinder screen opening. It has been observed that the average particle size was minimum at 0.5 mm screen opening and 8 kg h-1 feed rate at lower moisture content. Bond’s work index and Kick’s constant were found to increase from 8.97 to 950.92 kWh kg-1 and 0.932 to 78.851 kWh kg-1 with the increase of moisture content, feed rate and grinder screen opening, respectively. Size reduction ratio and grinding effectiveness of fenugreek seed were found to decrease from 4.11 to 1.61 and 0.0118 to 0.0018 with the increase of moisture content, feed rate and grinder screen opening, respectively. The loose and compact bulk densities varied from 219.2 to 719.4 kg m-3 and 137.3 to 736.2 kg m-3, respectively.  

scholarly journals Bibliometric Analysis of Specific Energy Consumption (SEC) in Machining Operations: A Sustainable Response

2021 ◽  
Vol 13 (10) ◽  
pp. 5617
Author(s):  
Raman Kumar ◽  
Sehijpal Singh ◽  
Ardamanbir Singh Sidhu ◽  
Catalin I. Pruncu
Keyword(s):  
Energy Consumption ◽  
Bibliometric Analysis ◽  
Specific Energy ◽  
Specific Energy Consumption ◽  
Primary Data ◽  
Data Content ◽  
Author Keywords ◽  
Link Strength ◽  
Inclusive Analysis ◽  
Machining Operations

This paper’s persistence is to make an inclusive analysis of 268 documents about specific energy consumption (SEC) in machining operations from 2001 to 2020 in the Scopus database. A systematic approach collects information on SEC documents’ primary data; their types, publications, citations, and predictions are presented. The VOSviewer 1.1.16 and Biblioshiny 2.0 software are used for visualization analysis to show the progress standing of SEC publications. The selection criteria of documents are set for citation analysis. The ranks are assigned to the most prolific and dominant authors, sources, articles, countries, and organizations based on the total citations, number of documents, average total citation, and total link strength. The author-keywords, index-keywords, and text data content analysis has been conducted to find the hotspots and progress trend in SEC in machining operations. The most prolific and dominant article, source, author, organization, and country are Anderson et al. “Laser-assisted machining of Inconel 718 with an economic analysis”, the Int J Mach Tools Manuf, Shin Y.C., form Purdue University Singapore, and United States, respectively, based on total citations as per defined criteria. The author keywords “specific cutting energy” and “surface roughness” dominate the machining operations SEC. SEC’s implication in machining operations review and bibliometric analysis is to deliver an inclusive perception for the scholars working in this field. It is the primary paper that utilizes bibliometric research to analyze the SEC in machining operations publications expansively. It is valuable for scholars to grasp the hotspots in this field in time and help the researchers in the SEC exploration arena rapidly comprehend the expansion status and trend.

scholarly journals Batch Reverse Osmosis Desalination Modeling under a Time-Dependent Pressure Profile

Membranes ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 173
Author(s):  
Abdeljalil Chougradi ◽  
François Zaviska ◽  
Ahmed Abed ◽  
Jérôme Harmand ◽  
Jamal-Eddine Jellal ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Reverse Osmosis ◽  
Specific Energy ◽  
Energy Demand ◽  
Specific Energy Consumption ◽  
Pressure Profile ◽  
Recovery Ratio ◽  
Feed Concentration ◽  
Energetic Performance ◽  
Feed Volume

As world demand for clean water increases, reverse osmosis (RO) desalination has emerged as an attractive solution. Continuous RO is the most used desalination technology today. However, a new generation of configurations, working in unsteady-state feed concentration and pressure, have gained more attention recently, including the batch RO process. Our work presents a mathematical modeling for batch RO that offers the possibility of monitoring all variables of the process, including specific energy consumption, as a function of time and the recovery ratio. Validation is achieved by comparison with data from the experimental set-up and an existing model in the literature. Energetic comparison with continuous RO processes confirms that batch RO can be more energy efficient than can continuous RO, especially at a higher recovery ratio. It used, at recovery, 31% less energy for seawater and 19% less energy for brackish water. Modeling also proves that the batch RO process does not have to function under constant flux to deliver good energetic performance. In fact, under a linear pressure profile, batch RO can still deliver better energetic performance than can a continuous configuration. The parameters analysis shows that salinity, pump and energy recovery devices efficiencies are directly linked to the energy demand. While increasing feed volume has a limited effect after a certain volume due to dilution, it also shows, interestingly, a recovery ratio interval in which feed volume does not affect specific energy consumption.

Sign in / Sign up

Export Citation Format

Share Document