MAPEAMENTO DE CONTORNO BIOCLIMÁTICO EM AVIÁRIO DE REGIÃO TROPICAL NA CIDADE DE DRACENA/SP

2018 ◽  
Vol 33 (1) ◽  
pp. 58
Author(s):  
Maria Beatriz Sartor ◽  
Mariana Wagner de Toledo Piza ◽  
Gabriel Rondina Pupo da Silveira ◽  
Edéria Pereira Gomes Azevedo ◽  
Sérgio Campos
Keyword(s):  
Thermal Comfort ◽  
Thermal Environment ◽  
Tropical Region ◽  
Poultry Production ◽  
Poultry Facilities ◽  
Relative Air Humidity ◽  
Bioclimatic Variables ◽  
Different Seasons ◽  
Globe Temperature ◽  
Equidistant Points

O ambiente dentro dos galpões avícolas é um dos fatores primordiais para se conseguir bons índices zootécnicos e retornos financeiros. Assim, o objetivo deste estudo foi avaliar o ambiente térmico no interior do galpão de aves poedeiras em diferentes estações do ano na tentativa de proporcionar uma melhor relação ao bem-estar das aves. O estudo foi realizado no galpão de aves poedeiras na UNESP - campus de Dracena/SP. Foram distribuídos e aferidos em doze pontos equidistantes as principais variáveis bioclimáticas, como temperatura de globo negro, temperatura do ar, temperatura de bulbo seco, temperatura de bulbo úmido, temperatura de superfície de telhado, umidade relativa do ar e velocidade do vento. As medições foram feitas nas transições entre as estações do inverno e primavera, primavera e verão e verão e outono, com o intuito de observar qual é a melhor estação do ano em que as aves apresentam um melhor conforto térmico dentro das instalações avícolas. As médias das variáveis bioclimáticas foram comparadas utilizando o teste estatístico Tukey (95%) através do software Statigrafics Centurion, e o software de superfície SURFER para o mapeamento do aviário. Os resultados indicaram que a transição entre inverno e primavera apresentou melhores valores com relação ao conforto térmico dentro do galpão, possibilitando um melhor bem-estar das aves e consequentemente melhor desempenho e retorno financeiro.PALAVRAS-CHAVES: Ambiência, Aquecimento Global, Ondas De Calor, Zootecnia De Precisão. MAPPING BIOCLIMATIC CONTOUR OF A POULTRY SHED IN A TROPICAL REGION IN THE CITY OF DRACENA/SPABSTRACT: The environment inside poultry houses is one of the main factors to achieve good zootechnical indexes and financial returns. Thus, the objective of this study was to evaluate the thermal environment inside the shed of laying hens in different seasons of the year in an attempt to provide a better relation to the welfare of birds. The study was carried out in the poultry shed at UNESP campus in Dracena / SP. The main bioclimatic variables, such as black globe temperature, air temperature, dry bulb temperature, wet bulb temperature, roof surface temperature, relative air humidity and wind speed were distributed and measured at twelve equidistant points. The measurements were taken at the transition between the seasons of winter and spring, spring and summer and summer and fall, in order to obtain the best season of the year in which the birds can obtain better thermal comfort inside the poultry facilities. The averages of the bioclimatic variables were compared using the Tukey statistical test (95%) using the Statigrafics Centurion software, where the SURFER surface software was used to map the aviary. The results indicated that the transition between winter and spring presented better values with respect to thermal comfort inside the shed, allowing a better welfare of the birds and consequently better performance and financial return.KEYWORDS: Environment, Global Warming, Heatwaves, Precision Poultry Production.

MAPEAMENTO DE CONTORNO BIOCLIMÁTICO EM AVIÁRIO DE REGIÃO TROPICAL NA CIDADE DE DRACENA/SP

2018 ◽  
Vol 33 (1) ◽  
pp. 52
Author(s):  
Robert Guaracy Aparecido Cardoso Araujo ◽  
Leda Gobbo de Freitas Bueno ◽  
Silvia Regina Lucas de Souza
Keyword(s):  
Thermal Comfort ◽  
Thermal Environment ◽  
Tropical Region ◽  
Poultry Production ◽  
Poultry Facilities ◽  
Relative Air Humidity ◽  
Bioclimatic Variables ◽  
Different Seasons ◽  
Globe Temperature ◽  
Equidistant Points

O ambiente dentro dos galpões avícolas é um dos fatores primordiais para se conseguir bons índices zootécnicos e retornos financeiros. Assim, o objetivo deste estudo foi avaliar o ambiente térmico no interior do galpão de aves poedeiras em diferentes estações do ano na tentativa de proporcionar uma melhor relação ao bem-estar das aves. O estudo foi realizado no galpão de aves poedeiras na UNESP - campus de Dracena/SP. Foram distribuídos e aferidos em doze pontos equidistantes as principais variáveis bioclimáticas, como temperatura de globo negro, temperatura do ar, temperatura de bulbo seco, temperatura de bulbo úmido, temperatura de superfície de telhado, umidade relativa do ar e velocidade do vento. As medições foram feitas nas transições entre as estações do inverno e primavera, primavera e verão e verão e outono, com o intuito de observar qual é a melhor estação do ano em que as aves apresentam um melhor conforto térmico dentro das instalações avícolas. As médias das variáveis bioclimáticas foram comparadas utilizando o teste estatístico Tukey (95%) através do software Statigrafics Centurion, e o software de superfície SURFER para o mapeamento do aviário. Os resultados indicaram que a transição entre inverno e primavera apresentou melhores valores com relação ao conforto térmico dentro do galpão, possibilitando um melhor bem-estar das aves e consequentemente melhor desempenho e retorno financeiro.PALAVRAS-CHAVES: Ambiência, Aquecimento Global, Ondas De Calor, Zootecnia De Precisão. MAPPING BIOCLIMATIC CONTOUR OF A POULTRY SHED IN A TROPICAL REGION IN THE CITY OF DRACENA/SPABSTRACT: The environment inside poultry houses is one of the main factors to achieve good zootechnical indexes and financial returns. Thus, the objective of this study was to evaluate the thermal environment inside the shed of laying hens in different seasons of the year in an attempt to provide a better relation to the welfare of birds. The study was carried out in the poultry shed at UNESP campus in Dracena / SP. The main bioclimatic variables, such as black globe temperature, air temperature, dry bulb temperature, wet bulb temperature, roof surface temperature, relative air humidity and wind speed were distributed and measured at twelve equidistant points. The measurements were taken at the transition between the seasons of winter and spring, spring and summer and summer and fall, in order to obtain the best season of the year in which the birds can obtain better thermal comfort inside the poultry facilities. The averages of the bioclimatic variables were compared using the Tukey statistical test (95%) using the Statigrafics Centurion software, where the SURFER surface software was used to map the aviary. The results indicated that the transition between winter and spring presented better values with respect to thermal comfort inside the shed, allowing a better welfare of the birds and consequently better performance and financial return.KEYWORDS: Environment, Global Warming, Heatwaves, Precision Poultry Production.

scholarly journals Verification of the Fanger Model in Real Conditions

2020 ◽  
Vol 328 ◽  
pp. 01001
Author(s):  
Natalia Krawczyk ◽  
Andrej Kapjor ◽  
Łukasz J. Orman
Keyword(s):  
Light Intensity ◽  
Thermal Comfort ◽  
Temperature Sensor ◽  
Thermal Environment ◽  
Thermal Sensation ◽  
Winter Period ◽  
Air Humidity ◽  
Relative Air Humidity ◽  
Globe Temperature ◽  
Environment Parameters

This study presents the issue of thermal comfort based on the Fanger model. The research was conducted in 5 rooms in the autumn-winter period. The research consisted of measurement of thermal environment parameters, air temperature and flow rate, relative air humidity, globe temperature sensor and light intensity. During the research, the students filled in questionnaires concerning thermal sensation. This allowed them to express their assessment of thermal comfort (predicted mean vote PMV and predicted percentage of dissatisfied PPD), as well as their preferences concerning the prevailing room conditions. Differences between the actual average predicted rating index and the Fanger model were shown. It can be noted that Fanger’s model does not reflect the results of the respondents.

scholarly journals Environment in poultry production covered with thermal and aluminum roofing tiles

2015 ◽  
Vol 35 (2) ◽  
pp. 206-214
Author(s):  
FERNANDO G. DE OLIVEIRA ◽  
WANESSA M. GODOI ◽  
ROBERTA PASSINI
Keyword(s):  
Thermal Comfort ◽  
Thermal Environment ◽  
Radiant Heat ◽  
Poultry Production ◽  
Thermal Indices ◽  
Significance Level ◽  
Temperature And Humidity ◽  
Humidity Index ◽  
The Difference ◽  
Globe Temperature

Brazil is a country of tropical climate, a fact that hinders the poultry production in the aspect of thermal comfort. Thus, we aimed to evaluate the thermal environment in commercial poultry houses with different covers during the months of December 2012 to May 2013, in the municipality of Rio Verde, Goiás. The experimental design was completely randomized in split plots with factorial arrangement of treatments 2x3, being two shed models (thermal and aluminum roof tiles) and three sections within each shed (initial, central and final) for 182 days, having the days as replicates. The thermal environment was assessed through thermal comfort indices: Temperature and Humidity Index, Black Globe Temperature and Humidity Index, Radiant Heat Load and Enthalpy. The data was analyzed by SISVAR 5.1., through the analysis of variance, the Scott Knott test used to compare the means, considering a significance level of 1%. The results showed a significant statistical difference between the sheds and the points assessed (P < 0.05). The thermal shed had the lowest values for the environmental variables (Dbt and Bgt) and thermal indices studied, but larger values for the RH compared to the shed with aluminum covering. The use of thermal covers minimizes the difference in temperature range throughout various times of the day, being at 14:00 o'clock the prominence time to others.

A Review of the Impact of Vegetation in Solar Control towards Enhanced Thermal Comfort and Energy Performance in Buildings

2019 ◽  
Vol 887 ◽  
pp. 428-434
Author(s):  
Dorcas A. Ayeni ◽  
Olaniyi O. Aluko ◽  
Morisade O. Adegbie
Keyword(s):  
Thermal Comfort ◽  
Adaptive Capacity ◽  
Thermal Environment ◽  
Thermal Conditions ◽  
Building Design ◽  
Energy Performance ◽  
Tropical Region ◽  
Indoor Climate ◽  
Solar Control ◽  
The Impact

Man requires a thermal environment that is within the range of his adaptive capacity and if this fluctuates outside the normal, a reaction is required beyond its adaptive capacity which results to health challenges. Therefore, the aim of building design in the tropical region is to minimize the heat gain indoors and enhance evaporative cooling of the occupants of the space so as to achieve thermal comfort. In most cases, the passive technologies are not adequate in moderating indoor climate for human comfort thereby relying on active energy technique to provide the needed comfort for the building users. The need for the use of vegetation as a panacea for achieving comfortable indoor thermal conditions in housing is recognised by architects globally. However, the practice by architects in Nigeria is still at the lower ebb. The thrust of this paper therefore is to examine the impact of vegetation in solar control reducing thermal discomfort in housing thereby enhancing the energy performance of the buildings. Using secondary data, the paper identifies the benefits of vegetation in and around buildings to include improvement of indoor air quality through the aesthetics quality of the environment and concludes that vegetation in and around building will in no small measure contributes to saving energy consumption.

scholarly journals Analyzing the Effect of Water Body on the Thermal Environment and Comfort at Indoor and Outdoor Spaces in Tropical University Campus

2021 ◽  
Vol 12 (10) ◽  
pp. 282-288
Author(s):  
Farhadur Reza ◽  
◽  
Shoichi Kojima ◽  
Wataru Ando
Keyword(s):  
Thermal Comfort ◽  
Thermal Environment ◽  
Outdoor Thermal Comfort ◽  
University Campus ◽  
Clothing Insulation ◽  
Comfort Index ◽  
Outdoor Spaces ◽  
Globe Temperature ◽  
And Performance ◽  
University Spaces

Water bodies play a significant role in its surrounding thermal environment. Thermal comfort in university spaces is critical that affects the students’ health and performance as well as the staffs. This study investigated thermal environment and comfort near lakeside and non-lakeside tropical university spaces. Standard Effective Temperature (SET*) have been calculated using recorded air temperature, relative humidity, globe temperature, air velocity, clothing insulation and metabolic rate to evaluate the thermal comfort in outdoor and indoor spaces. The effects of weather parameters have been clearly visible on the comfort index. The calculated SET* values indicate that the outdoor thermal comfort near a lake is much closer to the standard comfort zone than non-lakeside outdoor space. In the case of indoor thermal comfort, however, slightly a different scenario has been observed. To achieve the desirable indoor thermal environment, some design considerations are recommended based on findings.

scholarly journals Summer sleep quality and change of bedroom thermal environment – from the beginning to the end of sleep

2019 ◽  
Vol 111 ◽  
pp. 06054
Author(s):  
Noriko Umemiya ◽  
Kurumi Yamagata ◽  
Tomohiro Kobayashi
Keyword(s):  
Sleep Quality ◽  
Thermal Comfort ◽  
Thermal Environment ◽  
Subjective Sleep Quality ◽  
Wet Bulb Globe Temperature ◽  
Subjective Sleep ◽  
Environment Changes ◽  
Globe Temperature

Relations between bedroom thermal environment changes and subjective sleep quality and thermal comfort were surveyed for 63 apartment occupants during midsummer in Osaka. Changes of Wet Bulb Globe Temperature (WBGT) of 123 air-conditioned and 41 naturally ventilated nights were compared. 1) For air-conditioned bedrooms, sleep quality was better for smaller changes of WBGT from the beginning of sleep and for faster changes of WBGT to constant from the beginning of sleep. 2) For naturally ventilated bedrooms, a) WBGT increased from the beginning of sleep and decreased toward the end of sleep for higher sleep quality nights. However, WBGT decreased from the beginning of sleep and increased toward the end of sleep for lower sleep quality nights. b) The WBGT change was smaller for thermally comfortable nights.

scholarly journals Effects of Supply Angle on Thermal Environment of Residential Space with Hybrid Desiccant Cooling System for Multi-Room Control

2020 ◽  
Vol 10 (20) ◽  
pp. 7271
Author(s):  
Joon Ahn ◽  
Ho Yup Choi
Keyword(s):  
Thermal Comfort ◽  
Thermal Environment ◽  
Cooling System ◽  
Living Room ◽  
Comfort Zone ◽  
Computational Fluid Dynamics Cfd ◽  
Dining Room ◽  
Typical Summer ◽  
Globe Temperature ◽  
American Society

In this study, local measurement and computational fluid dynamics (CFD) were employed to evaluate the thermal comfort in a residential environment where desiccant cooling is performed in an outdoor air condition, which is the typical summer weather in Korea. The desiccant cooling system in the present study has been developed for multi-room control with a hybrid air distribution, whereby mixing and displacement ventilation occur simultaneously. Due to this distribution of air flow, the thermal comfort was changed, and the thermal comfort indicators conflicted. The evaluation indicators included the ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers) comfort zone, predicted mean vote (PMV), and effective draft temperature (EDT). The dry-bulb temperature displayed a distribution of 26.2–26.8 °C in the cooling spaces, i.e., living room, kitchen, and dining room. When determined based on the standard ASHRAE comfort zone, the space where desiccant cooling takes place entered the comfort zone for summer. Due to the influence of solar radiation, the globe temperature was more than 2 °C higher than the dry-bulb temperature at the window. A difference of up to 6% in humidity was observed locally in the cooling space. In the dining room located along the outlet of the desiccant cooling device, the PMV entered the comfort zone, but was slightly above 1 in the rest of the space. Conversely, as for the EDT, its value was lower than −1.7 in the dining room, but was included in the comfort zone in the rest of the space. By adjusting the discharge angle upward, the PMV and EDT were expected to be more uniform in the cooling space. In particular, the optimum discharge angle obtained was 40° upward from the discharge surface.

scholarly journals Thermal comfort indices in individual shelters for dairy calves with different types of roofs

2011 ◽  
Vol 31 (6) ◽  
pp. 1044-1051 ◽  
Author(s):  
Patrícia C. de F Fonseca ◽  
Eduardo A. de Almeida ◽  
Roberta Passini
Keyword(s):  
Thermal Comfort ◽  
Building Materials ◽  
Statistical Difference ◽  
Thermal Environment ◽  
Dairy Calves ◽  
Asbestos Cement ◽  
Humidity Index ◽  
Globe Temperature ◽  
Materials Used ◽  
Comfort Indices

Among the building materials used in rural facilities, roofs are noteworthy for being largely responsible for thermal comfort, influencing the thermal balance within the shelter. This study aimed to evaluate the influence of roof on the Enthalpy (H), Thermal Load of Radiation (TLR), and Black Globe Temperature and Humidity Index (BGHI) in individual shelters for dairy calves. The design was completely randomized with three treatments: Z - zinc tile, AC - asbestos-cement tile and ACW - asbestos-cement tile painted white on the upper side. The averages were compared by the Scott Knott test at 1% probability. The results showed no statistical difference between treatments (P<0.01) and the external environment for H. For TLR, there was statistical difference among all treatments, where ACW showed the lowest TLR, 489.28 W m-2, followed by AC with 506.72 W m-2 and Z with the highest TLR, 523.55 W m-2. For BGHI, the lowest values were observed for ACW (76.8) and AC (77.4), differing significantly from Z, which obtained the highest value (81.6). The tiles with white paint on the upper side promoted the lowest TLR and the lowest BGHI, favoring the thermal environment in the shelter.

scholarly journals Thermal comfort findings: Scenario at Malaysian automotive industry

2013 ◽  
Vol 17 (2) ◽  
pp. 387-396 ◽  
Author(s):  
Ahmad Ismail ◽  
Kumar Karagaratnan ◽  
Kumaran Kadirgama
Keyword(s):  
Thermal Comfort ◽  
Automotive Industry ◽  
Thermal Environment ◽  
Thermal Sensation ◽  
Human Subjects ◽  
Demographic Data ◽  
Working Environment ◽  
Paint Shop ◽  
Wet Bulb Globe Temperature ◽  
Globe Temperature

This paper discusses the findings of thermal comfort assessment at Malaysian automotive industry. Nine critical workstations were chosen as subjects for the study in order to determine the thermal comfort among workers at Malaysian automotive industry. The human subjects for the study comprises of the operators from tire receiving, dashboard assembly, drum tester, body assembly, seat assembly, door check assembly, stamping workstation, engine sub assembly and paint shop of the factory. The environmental factors such as Wet Bulb Globe Temperature (WBGT), relative humidity, air velocity, illuminance were measured using BABUC A apparatus and Thermal Comfort Measurement equipment. Through questionnaire survey, the demographic data of subjects and their perceptions on thermal comfort at each workstation were assessed based on ISO Standard 7730 and thermal sensation scale using Predicted Mean Vote (PMV). Then, Predicted Percentage of Dissatisfied (PPD) is used to estimate the thermal satisfaction of occupants. The results indicated that most of the workstations of the automotive industry are considered as uncomfortable. Tire receiving station is considered having better working environment compared to other stations with lowest PMV index of 1.09 to 1.41 and PPD of 46%. Meanwhile, the engine sub assembly station and paint shop of assembly are considered the worst thermal environment with the PMV index values ranging between 2.1 to 2.9 and PPD values of 81% to 99%. Therefore, these two workstations are considered not comfortable because the thermal sensation scale is warm and almost hot.

scholarly journals Evaluation of litter material and ventilation systems on poultry production: II. thermal comfort

2011 ◽  
Vol 40 (6) ◽  
pp. 1356-1363 ◽  
Author(s):  
Paulo Giovanni de Abreu ◽  
Valéria Maria Nascimento Abreu ◽  
Arlei Coldebella ◽  
Fátima Regina Ferreira Jaenisch ◽  
Doralice Pedroso de Paiva
Keyword(s):  
Repeated Measures ◽  
Thermal Environment ◽  
Thermal Conditions ◽  
Radiant Heat ◽  
Poultry Production ◽  
Rice Husks ◽  
Air Velocity ◽  
Globe Temperature ◽  
Soybean Straw ◽  
Ventilation Systems

The objective of this study was to evaluate environmental thermal conditions in broiler houses with two different ventilation systems and two different litter materials. The experiment was carried out in four 12 m × 10 m broiler houses, internally divided in 4 boxes/poultry house, with 200 birds/pen for four consecutive flocks, each one with a duration of 42 days with 15 days of downtime between flocks. Treatments tested were two ventilation systems (stationary or oscillating fans), and two types of litter materials (soybean straw or rice husks). It was collected in the center of each pen and in the external enviroment, dry and wet bulb temperatures, black globe temperature, and air velocity. These data were collected at 3-hour intervals from 8:00 a.m. to 6:00 p.m. at the fourth, fifth and sixth week age of the bird. Based on the data collected at each time, wet and globe temperature index (WBGT) and radiant heat load (RHL) were determined. Litter temperature reaings were also performed by using an infrared thermometer. Effects of flock, ventilation, week, hour and the interactions among factors on the studied variables were evaluated in the analysis of the internal thermal environment by using the theory of mixed models for repeated measures. Ventilation provided by stationary and oscilating fans had equal behavior and it did not affect the studied variable. However, both ventilation systems are sufficient to soften internal thermal conditions in the broiler house in relation to the external environment. Relative humidity of the air is higher when rice husks is used as litter material.

Sign in / Sign up

Export Citation Format

Share Document