scholarly journals Synthesis and Physicochemical Study of Xanthan Butyl Ether

2021 ◽  
pp. 137-146
Author(s):  
Aleksandr S. Kazachenko ◽  
Olga Yu. Fetisova ◽  
Aleksandr V. Antonov ◽  
Galina N. Bondarenko ◽  
Valentine V. Sychev
Keyword(s):  
Electron Microscopy ◽  
Thermal Analysis ◽  
Scanning Electron Microscopy ◽  
Ir Spectroscopy ◽  
Phase Analysis ◽  
Elemental Analysis ◽  
Butyl Ester ◽  
Butyl Ether ◽  
X Ray ◽  
Scanning Electron

Xanthan is an important polysaccharide widely used in many industrial fields. It is produced by the bacteria Xanthomonascampestris. Chemical modification of xanthan can open up new horizons for its use. In this work, xanthan butyl ester was obtained for the first time by the interaction of xanthan and bromobutane using sodium hydroxide as a catalyst. The composition and structure of the obtained new xanthan derivative was studied by elemental analysis, IR spectroscopy, X-ray phase analysis, scanning electron microscopy and thermal analysis. The introduction of a butyl group into the xanthan molecule was proved by elemental analysis and IR spectroscopy by the appearance of corresponding bands. It was shown by X-ray phase analysis that xanthan butyl ether has a more X-ray amorphous structure in comparison with the original xanthan. It was shown by scanning electron microscopy that xanthan butyl ether powder consists of particles of a larger size and a layered structure in comparison with the original xanthan. It has been shown by thermal analysis that xanthan butyl ether is less thermostable than the starting xanthan

PENINGKATAN LAJU DISOLUSI ACYCLOVIR DENGAN METODE SISTEM DISPERSI PADAT MENGGUNAKAN POLOXAMER 188

2016 ◽  
Vol 5 (1) ◽  
pp. 6
Author(s):  
Budi Setiawan ◽  
Erizal Zaini ◽  
Salman Umar
Keyword(s):  
Electron Microscopy ◽  
Thermal Analysis ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Differential Thermal Analysis ◽  
Fourier Transform Infrared ◽  
X Ray Diffraction ◽  
Poloxamer 188 ◽  
X Ray ◽  
Scanning Electron

Sebuah penelitian tentang sistem dispersi padat dari asiklovir dengan poloxamer 188 telah dilakukan formulasi dengan pencampuran secara fisika dengan rasio 1 : 1, 1 : 3, 1 : 5 dan dispersi padat 1 : 1, 1 : 3, 1 : 5 dan penggilingan 1:1 sebagai pembanding. Dispersi padat dibuat menggunakan metode pencairan (fusi), yang digabung dengan poloxamer 188 pada hotplate kemudian asiklovir dimasukkan ke dalam hasil poloxamer 188 lalu di kocok hingga membentuk masa homogen. Semua formula yang terbentuk termasuk asiklovir poloxamer 188 murni dianalisis karakterisasinya dengan Differential Thermal Analysis (DTA), X-ray Diffraction, Scanning Electron Microscopy (SEM), dan Fourier Transform Infrared (FTIR), kemudian pengambilan dilakukan  (penentuan kadar) mengunakan spektrofotometer UV pada panjang gelombang 257,08 nm dan uji laju disolusi dengan aquadest bebas CO2 menggunakan metode dayung. Hasil pengambilan  (penentuan kadar) menunjukkan bahwa semua formula memenuhi persyaratan farmakope Amerika edisi 30 dan farmakope Indonesia edisi 4 yaitu 95-110%. Sedangkan hasil uji laju disolusi untuk campuran fisik 1: 1, dan dispersi padat 1: 1, dan penggilingan 1: 1 menunjukkan peningkatan yang nyata dibandingkan asiklovir murni. Hal ini juga dapat dilihat dari hasil perhitungan statistik  menggunakan analisis varian satu arah  SPSS 17.

Effect of Heat Treatments on Wettability of Nacre

2020 ◽  
Vol 985 ◽  
pp. 86-90
Author(s):  
Andi Muhammad Anshar ◽  
Sengo Kobayashi ◽  
Satoshi Okano
Keyword(s):  
Electron Microscopy ◽  
Thermal Analysis ◽  
Scanning Electron Microscopy ◽  
Heating Temperature ◽  
Pearl Oyster ◽  
Heat Treatments ◽  
Organic Substances ◽  
Water Contact ◽  
X Ray ◽  
Scanning Electron

The surface wettability of biomaterials influences on osteoblast behavior and bone formation. In this research, the variation of wettability of nacre by heat treatments was examined. Plates of the nacre were fabricated from shells of the Akoya pearl oyster. The specimens were heated at 100, 200, 300, 400, 500, and 600 °C. Characterizations of the specimens during and after heat treatments were carried out using scanning electron microscopy, X-ray diffractometry, and thermogravimetry-differential thermal analysis. The water contact angle (WCA) of the specimen was measured to evaluate wettability. The color of nacre changed from iridescent color to brownish weak-iridescence by the heating at and over 300 °C. The nacre heated at and over 300 °C became brittle because organic substances in nacre, which acts as the glue between the aragonite platelets were evaporated by the heating. The WCA of the specimen was decreased with increasing heating temperature, which should be related to the decrease in the number of organic substances in nacre by the heating.

Phase composition and morphological analysis of human gallstones using IR spectroscopy, scanning electron microscopy and X-ray Rietveld analysis

2016 ◽  
Vol 231 (2) ◽  
Author(s):  
Samiran Pramanik ◽  
Soumen Ghosh ◽  
Arkaprovo Roy ◽  
Ramanuj Mukherjee ◽  
Alok Kumar Mukherjee
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Phase Composition ◽  
Ir Spectroscopy ◽  
Rietveld Analysis ◽  
Quantitative Phase Analysis ◽  
Human Gallbladder ◽  
X Ray ◽  
Quantitative Phase ◽  
Scanning Electron

AbstractQuantitative phase composition and morphological characterization of 12 human gallbladder stones (GS1–GS12) retrieved from patients of eastern India have been carried out using IR-spectroscopy, powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM). The FTIR spectra indicated that the primary composition of gallstones studied was cholesterol. X-ray powder diffraction study revealed cholesterol monohydrate (CHM) as the major crystalline phase in GS1–GS12. The Rietveld analysis showed that nine of the gallstones were composed exclusively of CHM, while the remaining three stones contained in addition to CHM, small amounts (4.2–10.6 wt%) of calcium carbonate as aragonite and vaterite. The crystallite size of CHM in GS1–GS12 varied between 82(6) and 249(3) nm. The SEM images of gallstones showed different crystal habits of CHM such as plates, thin rods, rectangular and hexagonal blocks, which resulted into different levels of agglomeration at the mesoscopic scale. Presence of numerous parasitic eggs with a typical muskmelon surface in three gallstones (GS2, GS7 and GS9) suggests possible association between the liver fluke infection and biliary stone formation in these patients. To the best of our knowledge, the study constitutes the first report of X-ray quantitative phase analysis of gallstones using the Rietveld methodology.

New coordination polymers of glyoxal bis(2-hydroxyanil)

1995 ◽  
Vol 7 (4) ◽  
pp. 433-441 ◽  
Author(s):  
Salah A EI-Shatoury
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Metal Ions ◽  
Coordination Polymers ◽  
Elemental Analysis ◽  
Electronic Spectra ◽  
Metal Content ◽  
X Ray ◽  
Dsc Analyses ◽  
Scanning Electron

Coordination polymers of [2,2'-(ethandiylidenedinitrilo) diphenol) have been prepared with the metal ions Cu(II), Ni(1I) and Cr(III). They were characterized by elemental analysis, IR and electronic spectra. The metal content in all polymers was found to be consistent with a 1:1 (metal:ligand) stoichiometry. The thermal behaviour of these coordination polymers has been studied by thermogravimetric and DSC analyses in air up to 500 C. The crystallinity of the formed polymers was determined by x-ray analysis. The morphological structures of these polymers were determined by scanning electron microscopy.

Elemental Analysis of Alkalis and Dental Deposits Associated with Coca Chewing in Ecuador

2006 ◽  
Vol 17 (1) ◽  
pp. 77-89 ◽  
Author(s):  
Douglas H. Ubelaker ◽  
Karen E. Stothert
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Spectral Analysis ◽  
North America ◽  
Elemental Analysis ◽  
X Ray ◽  
Tooth Structure ◽  
Elemental Analyses ◽  
The Relationship ◽  
Scanning Electron

AbstractThe relationship between Andean coca use and dental deposits is explored through the use of scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS). Elemental analyses of samples of large dental deposits from archeologically recovered skeletons from Ecuador dating between 500 B.C. and A.D. 1532 are compared with those of normal calculus deposits of individuals from North America (modern and precontact), of normal tooth structure and of samples of alkali recovered from Ecuadorian artifacts thought to have been employed in coca use. Spectral analysis revealed homogeneity among all dental samples (deposits and structure) and that they are distinct from the elemental pattern revealed in the analysis of the artifact alkalis.

Darstellung und Charakterisierung des Silber(I,II,III)-oxidclathrates Ag7O8HCO3 / Synthesis and Characterization of the Silver(I,II,III) Oxide Clathrate Ag7O8HCO3

2000 ◽  
Vol 55 (9) ◽  
pp. 882-886 ◽  
Author(s):  
Martin Jansen ◽  
Sascha Vensky
Keyword(s):  
Electron Microscopy ◽  
Thermal Analysis ◽  
Scanning Electron Microscopy ◽  
Magnetic Susceptibility ◽  
Solid State Nmr ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

The silver(I,II,III) oxide clathrate Ag7O8HCO3 was synthesized by anodic oxidation of silver(I) in a suspension of Ag2CO3 in an aqueous AgF solution. The title compound was characterized by single crystal X-ray diffraction (cubic, Fm3̄m, a = 9.8085(3) Å, Z = 4), scanning electron microscopy, thermal analysis, IR spectroscopy, 1H-solid state-NMR and measurement of the magnetic susceptibility

Sign in / Sign up

Export Citation Format

Share Document