scholarly journals Human Hair Fibre Reinforced Concrete

Author(s):  
George M Varghese ◽  
Adarsh M V ◽  
Alphy Jomichan ◽  
Ajna Manaf ◽  
Author(s):  
S. O. Adetola

Efforts have been made to improve the quality and performance of concrete structures especially its permeability and durability properties. Concrete is a heterogeneous material containing several components (sand, aggregate, cement, etc.) which vary in size and geometry, and their positions in the concrete enclosure are randomly distributed, giving them defects even before experiencing any form of mechanical loading. In this study, the compositions of Chicken Feather Fibre (CFF) and Synthetic Hair Fibre (SHF) by weight were varied by 0%, 1.5%, 2.5%, 3.5% and 5% for Samples A to E respectively. Physical and Mechanical properties such as water absorption (WA), thickness swelling (TS), compressive and split tensile strength were determined. Results showed that WA and TS property of the fibre reinforced concrete block decreased with decrease in percentage by weight of CFF and SHF and curing days with highest value being 10.01 to a lowest value of 0.14. Also, compressive strength (CS) for sample A increased with increase in curing days from 16.98MPa at 7 days to 20.66MPa at 28 days and sample B has its highest CS at 14 days with 9.98 MPa while other samples decreased progressively. Split Tensile Strength (STS) for sample A increases with increase in curing days from 9.84MPa to 13.64MPa while sample B decreases from 7 to 21 days of curing from 5.43MPa to 4.79MPa and increased at 28 days to 4.92MPa. Samples C, D and E follow same trend as sample B. The SEM study shows that the interlocking concrete block (ICB) containing 0% of chicken feather and synthetic hair fibre has brittle characteristics while other samples containing different percentage by weight of chicken feather and synthetic hair fibre shows ductile characteristics. CFF and SHF enhanced WA, TS, CS and STS of fibre reinforced concrete.


2019 ◽  
Vol 14 (3) ◽  
pp. 6089-6092
Author(s):  
Awang Nasrizal Awang Ali ◽  
Normadiana Mohammad Hanapi ◽  
Mohd Mawardi Bin Mohd Kamal ◽  
Jamil Matarul ◽  
Basir Noordin

Author(s):  
Hummaira Kanwal ◽  
Muhammad Shahzad Aslam ◽  
Tayyaba Latif Mughal ◽  
Muhammad Asim ◽  
Reena Majid Memon

FRC (Fibre Reinforced Concrete) is fibrous material which increases its structural integrity, resists to explosive spalling in case of environmental affects, improves mix cohesion, improves ductility, reduces of steel reinforcement requirements and reduces the voids due to good stiffness. It contains short discrete fibres that are uniformly distributed. Mostly, natural fibers are the waste material which may have negative impact on environment. Synthetic fibres include steel fibres and glass fibres but natural fibres are coconut fibres and human hair fibres which tends to vary the properties to concrete. In addition, the character of FRC changes with varying concrete, fibre material, geometries, distribution, orientation and densities. Hair fibre concrete gives a practical, cost-effective and convenient method to avoid cracks and deficiencies regarding strength and proper mixing ratio which occurs at a longer period. Fibres have been used to reduce plastic shrinkage and drying shrinkage in concrete. In some structural elements, fibrous concrete can be used to reduce the cost of structure. Different fibres are used to improve the tensile strength of concrete. Human hair are strong in tension. Hair fibres can be utilized as a strengthening material. Hair fibre is a non-decay able matter and available at a cheap rate. Experiments have been performed on fibrous concrete cylinders containing various percentages of human hair which is 0, 0.5, 1 and 1.5% by the weight of cement. A total of seventy-two cylinders have been prepared with FRC having different %ages of hair content. Workability, compressive strength and split tensile strength have been checked at three curing ages i.e. 7, 14 and 28 days. This research will open a new wicket in the horizon of reuse of waste material efficiently in construction industry. This innovation in construction industry will save our natural resources and use fibre in productive and an effective approach.


Author(s):  
Awang Nasrizal Awang Ali ◽  
Normadiana Mohammad Hanapi ◽  
Mohd. Mawardi Mohd. Kamal ◽  
Amminudin Ab. Latif ◽  
Jamil Matarul ◽  
...  

2019 ◽  
Vol 26 (4) ◽  
pp. 197-208
Author(s):  
Leo Gu Li ◽  
Albert Kwok Hung Kwan

Previous research studies have indicated that using fibres to improve crack resistance and applying expansive agent (EA) to compensate shrinkage are both effective methods to mitigate shrinkage cracking of concrete, and the additions of both fibres and EA can enhance the other performance attributes of concrete. In this study, an EA was added to fibre reinforced concrete (FRC) to produce concrete mixes with various water/binder (W/B) ratios, steel fibre (SF) contents and EA contents for testing of their workability and compressive properties. The test results showed that adding EA would slightly increase the superplasticiser (SP) demand and decrease the compressive strength, Young’s modulus and Poisson’s ratio, but significantly improve the toughness and specific toughness of the steel FRC produced. Such improvement in toughness may be attributed to the pre-stress of the concrete matrix and the confinement effect of the SFs due to the expansion of the concrete and the restraint of the SFs against such expansion.


2014 ◽  
Vol 5 (2) ◽  
pp. 119-125
Author(s):  
I. Kovács

The present paper of a series deals with the experimental characterisation of flexural toughness properties of structural concrete containing different volume of hooked-end steel fibre reinforcement (75 kg/m3, 150 kg/m3). Third-point flexural tests were carried out on steel fibre reinforced concrete beams having a cross-section of 80 mm × 85 mm with the span of 765 mm, hence the shear span to depth ratio was 3. Beams were sawn out of steel fibre reinforced slab elements (see Part I) in order to take into consideration the introduced privilege fibre orientation (I and II) and the position of the beam (Ba-a, Ba-b, Ba-c) before sawing (see Part I). Flexural toughness properties were determined considering different standard specifications, namely the method of the ASTM (American Standards for Testing Materials), the process of the JSCE (Japan Society of Civil Engineering), and the final proposal of Banthia and Trottier for the post cracking strength. Consequently, behaviour of steel fibre reinforced concrete was examined in bending taking into consideration different experimental parameters such as fibre content, concrete mix proportions, fibre orientation, positions of test specimens in the formwork, while experimental constants were the size of specimens, the type of fibre used and the test set-up and test arrangement.


Sign in / Sign up

Export Citation Format

Share Document