scholarly journals Digital format for preparation of instrument production. Part 1. Design stage

2020 ◽  
Vol 63 (3) ◽  
pp. 242-249
Author(s):  
V.F. Bulavin ◽  
T.G. Bulavina ◽  
V.V. Yakhrichev ◽  
A.S. Stepanov
Keyword(s):  
Design Stage ◽  
Digital Format ◽  
Instrument Production ◽  
Production Part

scholarly journals Preliminary project design for insect production: part 2 – organism kinetics, system dynamics and the role of modelling & simulation

2021 ◽  
pp. 1-14
Author(s):  
R. Kok
Keyword(s):  
Operating Conditions ◽  
Design Stage ◽  
Project Design ◽  
Specific System ◽  
Simulation Based ◽  
Possibility Space ◽  
Formal Design ◽  
Parameter Values ◽  
Production Part

During preliminary project design (PPD) an entopreneur can investigate a variety of process types, organism/feed combinations, operating conditions and procedures, control approaches, etc. before deciding on a specific system arrangement and proceeding to a more formal design stage. With modelling and simulation the effort required to locate a high-value point within the overall possibility space for a system can be greatly reduced because much of the development work can be carried out in a virtual environment. Nevertheless, to formulate models of the organism/feed kinetics as well as other system aspects, this approach must be based on experimental data. And, of course, results of a simulation study must be verified empirically. A simulation-based approach to PPD allows an entopreneur to study the dynamics of a wide variety of system arrangements and to gain insight into how a given arrangement is likely to perform with different parameter values and disturbances.

Review of operational indications on the design of facilities for radiopharmaceutical manufacturing in italy

2020 ◽  
Author(s):  
M.A. D’Avanzo ◽  
G.M. Contessa ◽  
G. Cocomello ◽  
M. Mattozzi ◽  
M. Pacilio ◽  
...  
Keyword(s):  
Ionizing Radiation ◽  
Design Stage ◽  
Safety Aspects ◽  
Scientific Institutions ◽  
Available Information

Purpose. In this article, the authors propose useful operational indications to approach in the best possible way the issues concerning the design of a facility for manufacturing radiopharmaceuticals, with focus on organizational and safety aspects. Methods. Several documents produced by authoritative bodies, national and international scientific institutions and associations were examined and referenced, to the purpose of reviewing all available information in the field. Results. Indications are gathered for the design stage, including the organization of accesses and routes and characteristics and requirements of premises and systems. Conclusions. Main goal is to guide the reader in evaluating and choosing the most suitable features and equipment to limit the risks due to ionizing radiation and to prevent contamination of the workers and the environment.

Pilot trials of hemicelluloses extraction prior to thermomechanical pulp production: Part 1

TAPPI Journal ◽  
2011 ◽  
Vol 10 (5) ◽  
pp. 21-28 ◽  
Author(s):  
CARL HOUTMAN ◽  
ERIC HORN
Keyword(s):  
Oxalic Acid ◽  
Energy Savings ◽  
Wood Chip ◽  
Strength Properties ◽  
Thermomechanical Pulp ◽  
Sugar Solution ◽  
Bisulfite Treatment ◽  
Pilot Trials ◽  
Pulp Production ◽  
Production Part

Pilot data indicate that wood chip pretreatment with oxalic acid reduced the specific energy required to make thermomechanical pulp. A combined oxalic acid/bisulfite treatment resulted in 21% refiner energy savings and 13% increase in brightness for aspen. A low level of oxalic acid treatment was effective for spruce. Energy savings of 30% was observed with no significant change in strength properties. Adding bisulfite did not significantly increase the brightness of the spruce pulp. For pine, the optimum treatment was a moderate level of oxalic acid, which resulted in 34% energy savings and an increase in strength properties. For all of these treatments 1–3 w/w % carbohydrates were recovered, which can be fermented to produce ethanol. The extract sugar solution contained significant quantities of arabinose.

Multi-Objective Design Problem of Tire Wear and Visualization of Its Pareto Solutions2

2006 ◽  
Vol 34 (3) ◽  
pp. 170-194 ◽  
Author(s):  
M. Koishi ◽  
Z. Shida
Keyword(s):  
Inverse Problems ◽  
Conceptual Design ◽  
Dimensional Space ◽  
Design Stage ◽  
Objective Functions ◽  
Pareto Solutions ◽  
Design Problems ◽  
Multi Objective ◽  
Design Engineers ◽  
Design Variables

Abstract Since tires carry out many functions and many of them have tradeoffs, it is important to find the combination of design variables that satisfy well-balanced performance in conceptual design stage. To find a good design of tires is to solve the multi-objective design problems, i.e., inverse problems. However, due to the lack of suitable solution techniques, such problems are converted into a single-objective optimization problem before being solved. Therefore, it is difficult to find the Pareto solutions of multi-objective design problems of tires. Recently, multi-objective evolutionary algorithms have become popular in many fields to find the Pareto solutions. In this paper, we propose a design procedure to solve multi-objective design problems as the comprehensive solver of inverse problems. At first, a multi-objective genetic algorithm (MOGA) is employed to find the Pareto solutions of tire performance, which are in multi-dimensional space of objective functions. Response surface method is also used to evaluate objective functions in the optimization process and can reduce CPU time dramatically. In addition, a self-organizing map (SOM) proposed by Kohonen is used to map Pareto solutions from high-dimensional objective space onto two-dimensional space. Using SOM, design engineers see easily the Pareto solutions of tire performance and can find suitable design plans. The SOM can be considered as an inverse function that defines the relation between Pareto solutions and design variables. To demonstrate the procedure, tire tread design is conducted. The objective of design is to improve uneven wear and wear life for both the front tire and the rear tire of a passenger car. Wear performance is evaluated by finite element analysis (FEA). Response surface is obtained by the design of experiments and FEA. Using both MOGA and SOM, we obtain a map of Pareto solutions. We can find suitable design plans that satisfy well-balanced performance on the map called “multi-performance map.” It helps tire design engineers to make their decision in conceptual design stage.

Conceptualising the Benefit Framework of an Enterprise Content Management System (ECMS)

2018 ◽  
Vol 15 (2) ◽  
pp. 17
Author(s):  
Mohamad Rahimi Mohamad Rosman ◽  
Mohammad Azhan Abdul Aziz
Keyword(s):  
Management System ◽  
Content Management ◽  
Extensive Review ◽  
Content Management System ◽  
Field Of Study ◽  
Factors Influencing ◽  
Digital Format ◽  
Enterprise Content Management ◽  
The Subject

Content management is an organisational effort of managing content, particularly in digital format. Although it has been over 25 years since content management was introduced, this field of study is still considered an emerging topic with unresolved issues-in particular, the subject of benefit achievement. Therefore, grounded on an extensive review of 135 articles, the purpose of this study is to investigate the benefits that organisations can gain through the proper use of an Enterprise Content Management System (ECMS). Subsequently, this paper identifies a list of ECMS benefits and proposes an ECMS benefit framework for further exploration into this field. Our result shows that although ECMS does bring benefits to organisations, these benefits are diverse; indicating that there are certain determinants or factors influencing the achievement of such benefits. Moreover, it is also found that in the context of the benefit framework of Shang and Seddon [10], three categories were found relevant to the field of content management: operational benefit, managerial benefit, and strategic benefit.

Tailoring Design Development and Ideation in Catering To Industry Demands

2017 ◽  
Vol 14 (1) ◽  
pp. 67
Author(s):  
Fadila Mohd Yusof ◽  
Azmir Mamat Nawi ◽  
Azhari Md Hashim ◽  
Ahmad Fazlan Ahmad Zamri ◽  
Abu Hanifa Ab Hamid ◽  
...  
Keyword(s):  
Teaching And Learning ◽  
Industrial Design ◽  
Protocol Analysis ◽  
Early Stage ◽  
Idea Generation ◽  
Learning Processes ◽  
Design Stage ◽  
Design Development ◽  
Conceptual Design Phase ◽  
Industry Practice

Design development is one of the processes in the teaching and learning of industrial design. This process is important during the early stage of ideas before continuing to the next design stage. This study was conducted to investigate the comparison between  academic  syllabus  and  industry  practices  whether  these  processes  are  highly dependent on the idea generation and interaction related to the designer or to the student itself. The data were gathered through an observation of industry practice during conceptual design phase, teaching and learning process in academic through Video Protocol Analysis (VPA) method and interviews with industry practitioners via structured and unstructured questionnaires. The data were analysed by using NVivo software in order to formulate the results. The findings may possibly contribute to the teaching and learning processes especially in the improvement of industrial design syllabus in order to meet the industry demands. Keywords: design development, industrial design, industry demands

Sign in / Sign up

Export Citation Format

Share Document