scholarly journals Achieving a More Sustainable and Fair Society: How Individual and Collective Action Shape the Energy Efficiency of Buildings / Conseguindo uma Sociedade Mais Sustentável e Justa: Como a Ação Individual e Coletiva Molda a Eficiência Energética dos Edifícios

Author(s):  
Teresa Parejo-Navajas

AbstractThe behavior of occupants in buildings has an enormous impact on their energy consumption. Despite the efforts to improve the energy efficiency in buildings, there are still many barriers that need to be overcome. Behavior change measures -to improve the energy performance of buildings- are focused on both, the design and the use and operation of buildings. If we are really committed to achieving the sustainable development objective to improve our society’s well-being, special attention should be put into energy use behavior as it has been proven to be an effective way for improvement. ResumoO comportamento dos ocupantes em edifícios tem um enorme impacto no seu consumo de energia. Apesar dos esforços para melhorar a eficiência energética nos edifícios, ainda há muitas barreiras que precisam ser superadas. Medidas de mudança de condutas - para melhorar o desempenho energético dos edifícios - são focadas tanto no design como na utilização e operação de edifícios. Se estamos realmente empenhados em alcançar o objetivo de desenvolvimento sustentável para melhorar o bem-estar da nossa sociedade, uma atenção particular deve ser proporcionada em relação as condutas que influem no uso cotidiano de energia, uma vez que se provou ser um meio eficaz de progresso.

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Muhammad Arif Budiyanto ◽  
Muhammad Hanzalah Huzaifi ◽  
Simon Juanda Sirait ◽  
Putu Hangga Nan Prayoga

AbstractSustainable development of container terminals is based on energy efficiency and reduction in CO2 emissions. This study estimated the energy consumption and CO2 emissions in container terminals according to their layouts. Energy consumption was calculated based on utility data as well as fuel and electricity consumptions for each container-handling equipment in the container terminal. CO2 emissions were estimated using movement modality based on the number of movements of and distance travelled by each container-handling equipment. A case study involving two types of container terminal layouts i.e. parallel and perpendicular layouts, was conducted. The contributions of each container-handling equipment to the energy consumption and CO2 emissions were estimated and evaluated using statistical analysis. The results of the case study indicated that on the CO2 emissions in parallel and perpendicular layouts were relatively similar (within the range of 16–19 kg/TEUs). These results indicate that both parallel and perpendicular layouts are suitable for future ports based on sustainable development. The results can also be used for future planning of operating patterns and layout selection in container terminals.


2021 ◽  
Author(s):  
M.R. Amjath ◽  
◽  
H. Chandanie ◽  
S.D.I.A. Amarasinghe ◽  
◽  
...  

It has been observed that inefficient buildings consume three to five times more energy than efficient buildings. Subsequently, improving the Energy Efficiency (EE) of existing buildings, which account for a significant portion of the energy consumption of the building sector, has become a top priority. Also, Heating, Ventilation, and Air Conditioning (HVAC) and lighting systems typically account for three-quarters of a building's energy consumption. Hence, focus on the energy efficiency improvements associated with these subsystems is entailed to optimise the energy use of buildings in comparison to other energy consumers. Energy Retrofit (ER) is defined as the main approach in improving the energy efficiency of buildings to achieve energy reduction goals. Nevertheless, there is a general lack of awareness regarding ER. Thus, the purpose of this article is to bridge this research gap by critically reviewing the applicable literature on ER. The paper first analysed the role of retrofits in buildings concerning optimising energy performance. The paper also discusses the implementation process of ER, which includes five steps viz. pre-retrofit survey, energy auditing, and performance assessment, identification of suitable and feasible retrofit options, site implementation and commissioning, and validation and verification. Further, different types of ER applicable to HVAC and lighting systems are discussed. In their endeavor to enhance the EE of existing buildings, practitioners could apply the findings of this study, as a basis to understand the available ER types and as a measure to gauge the efficiency of existing buildings, which will facilitate effective decision-making.


2020 ◽  
Vol 1 (1) ◽  
Author(s):  
Naim Jabbour

Data shows residential energy consumption constituting a significant portion of the overall energy end use in the European Union (EU), ranging between 15% and 30%. Furthermore, the EU’s dependency on foreign fossil fuel-based energy imports has been steadily increasing since 1993, constituting approximately 60% of its primary energy. This paper provides an analytical re-view of diverse residential building/energy policies in targeted EU countries, to shed insight on the impact of such policies and measures on energy use and efficiency trends. Accordingly, the adoption of robust residential green and energy efficient building policies in the EU has increased in the past decade. Moreover, data from EU energy efficiency and consumption databases attributes 44% of total energy savings since 2000 to energy upgrades and improvements within the residential sector. Consequently, many EU countries and organizations are continuously evaluating residential building energy consumption patterns to increase the sec-tor’s overall energy performance. To that end, energy efficiency gains in EU households were measured at 1% in 2000 compared to 27.8% in 2016, a 2600% increase. Accordingly, 36 policies have been implemented successfully since 1991 across the EU targeting improvements in residential energy efficiency and reductions in energy use. Moreover, the adoption of National Energy Efficiency Actions Plans (NEEACP) across the EU have been a major driver of energy savings and energy efficiency. Most energy efficiency plans have followed a holistic multi-dimensional approach targeting the following areas, legislative actions, financial incentives, fiscal tax exemptions, and public education and awareness programs and campaigns. These measures and policy instruments have cumulatively generated significant energy savings and measurable improvements in energy performance across the EU since their inception. As a result, EU residential energy consumption trends show a consistent decrease over the past decade. The purpose of this analysis is to explore, examine, and compare the various green building and energy-related policies in the EU, highlighting some of the more robust and progressive aspects of such policies. The paper will also analyze the multiple policies and guidelines across targeted European nations. Lastly, the study will assess the status of green residential building policies in Lebanon, drawing from the comprehensive European measures, in order to recommend a comprehensive set of guidelines to advance energy policies and building practices in the country. Keywords: Building Policies; Residential Energy Patterns; Residential Energy Consumption; Energy Savings


Author(s):  
Salah Ouldboukhitine ◽  
Sofiane Amziane ◽  
Maroua Benkhaled

The energy performance of buildings represents a major challenge in terms of sustainable development. The buildings and buildings construction sectors combined are responsible for over one-third of global final energy consumption and nearly 40% of total direct and indirect CO2 emissions. In order to reduce the energy consumption of buildings and their harmful impact on the environment, special attention has been paid in recent years to the use of bio-based materials. Several works have been carried out in the last decades in order to model the coupled heat, air and moisture transfers in the building envelope but the difficulties lies in the identification of numerous parameters that the HAM proposed models use. In the present paper, a sensitivity study regarding the HAM parameters is implemented in order to apprehend the most determining parameters during the transfer processes. A reduced model based on these parameters is then determined.


2019 ◽  
Vol 11 (6) ◽  
pp. 1672 ◽  
Author(s):  
Ali Amiri ◽  
Juudit Ottelin ◽  
Jaana Sorvari

Depletion of natural resources and climate change are undoubtedly the biggest challenges that humankind faces today. Here, buildings have a crucial role since they consume the majority, i.e., 30% to 40% of the total energy resources. Green building certification is one of the solutions to limit the energy use in buildings. In addition, it is seen to indicate a consideration for sustainability aspects in construction. LEED is the most widely used certificate worldwide. However, recently some critics have raised doubts about LEED and whether it actually implies sustainability. Most of the criticism has been targeted to the energy aspects of LEED. Nevertheless, there is no consensus on the usefulness of LEED: is it really beneficial for the environment, and is it worth of the money and time invested on the certification process? In this study a critical analysis of the literature to find an answer to this question is presented. Altogether 44 peer reviewed articles dealing with the abovementioned issue were selected out of 164 search result. Based on the studied material, the different aspects of LEED from the viewpoint of energy-efficiency are discussed. From the 44 reviewed articles, ten articles state that LEED certificate indicates energy efficiency while eight papers end up with an opposite conclusion. The rest of the papers do not take any stand on this matter. The study showed that energy efficiency of LEED-certified buildings is questionable especially at lower levels, i.e., certified. Therefore, it is recommended to modify the Energy and Atmosphere category of LEED in order to improve the actual energy performance of buildings.


2019 ◽  
Vol 887 ◽  
pp. 335-343
Author(s):  
Nazanin Moazzen ◽  
Mustafa Erkan Karaguler ◽  
Touraj Ashrafian

Energy efficiency has become a crucial part of human life, which has an adverse impact on the social and economic development of any country. In Turkey, it is a critical issue especially in the construction sector due to increase in the dependency on the fuel demands. The energy consumption, which is used during the life cycle of a building, is a huge amount affected by the energy demand for material and building construction, HVAC and lighting systems, maintenance, equipment, and demolition. In general, the Life Cycle Energy (LCE) needs of the building can be summarised as the operational and embodied energy together with the energy use for demolition and recycling processes.Besides, schools alone are responsible for about 15% of the total energy consumption of the commercial building sector. To reduce the energy use and CO2 emission, the operational and embodied energy of the buildings must be minimised. Overall, it seems that choosing proper architectural measures for the envelope and using low emitting material can be a logical step for reducing operational and embodied energy consumptions.This paper is concentrated on the operating and embodied energy consumptions resulting from the application of different architectural measures through the building envelope. It proposes an educational building with low CO2 emission and proper energy performance in Turkey. To illustrate the method of the approach, this contribution illustrates a case study, which was performed on a representative schoold building in Istanbul, Turkey. Energy used for HVAC and lighting in the operating phase and the energy used for the manufacture of the materials are the most significant parts of embodied energy in the LCE analyses. This case study building’s primary energy consumption was calculated with the help of dynamic simulation tools, EnergyPlus and DesignBuilder. Then, different architectural energy efficiency measures were applied to the envelope of the case study building. Then, the influence of proposed actions on LCE consumption and Life Cycle CO2 (LCCO2) emissions were assessed according to the Life Cycle Assessment (LCA) method.


2019 ◽  
Vol 8 (5) ◽  
pp. 366-390 ◽  
Author(s):  
Phan Anh Nguyen ◽  
Regina Bokel ◽  
Andy van den Dobbelsteen

Purpose Refurbishing houses is considered a key measure to improve the energy efficiency of the built environment. However, little is known about the implementation and outcome of housing renovation for energy upgrades in the Vietnamese practice. The purpose of this paper is to investigate the energy performance of the current housing stock in Vietnam and the potential to reduce energy use in households. Design/methodology/approach The paper is based on a survey with 153 respondents in three major climatic regions of Vietnam. The survey focusses on building characteristics, environmental performance, energy performance and refurbishment activities. Data collected from the survey were statistically analysed to give insight into the current performance of the housing stock and its energy saving potential. Findings This paper concludes that building design and construction, particularly the building envelope, have a significant influence on the occupants’ comfort. However, the energy consumption in houses is not statistically associated with building design and indoor environment. It is suggested that financial status and occupants’ behaviour currently have a strong influence on the household energy use. The survey also showed that refurbishment improves the housing performance, especially if improving the indoor environment was one of the drivers. Originality/value There are very few studies on energy use in households in Vietnam, especially with regards to actual energy consumption. This paper brings insights into the actual energy consumption and reveals the “performance gap” in Vietnamese housing stock.


Author(s):  
Daranee Jareemit ◽  
Parintorn Canyookt

Abstract Thailand committed to achieving the Sustainable Development Goals to increase urban livability and reduce energy use in the building sector. However, the design information to achieve those challenge goals has been undefined. This study aimed to investigate and examine potential improvements for outdoor thermal comfort and energy efficiency in 136 designs of the two-type residential cluster in Pathum Thani, Thailand, via designs of building orientation, geometry and window-to-wall ratio (WWR). The daily cooling energy consumption in residential clusters was performed using eQuest under the modified weather data from the prior microclimate analysis. The energy-saving scenarios were calculated and compared to the acceptable outdoor thermal comfort hours. It is found that the row house cluster had the potential to be more sustainable than a single house. The row house clusters on orthogonal street orientation offered the highest percentage of hours in outdoor thermal comfort of 46% and energy efficiency below the new standard of Thailand. The cooling energy savings through increasing H/W with lowering WWR was up to 32%. This study’s results could provide urban planners and architects with the new design guidelines and improvement potentials to make cities more energy efficient and environmentally friendly for outdoor living in Thailand.


Author(s):  
Vasyl Zelenko ◽  
Yaryna Ferenchak ◽  
Nataliya Zelenko

The paper outlines major preconditions of development of energy efficiency programs and the process of their introduction from the perspective of sustainable development concept. Energy saving measures of European Union are examined, its experience and results, like green books and Thermie programs, etc are analyzed. The paper also specifies relevant activities and responsibilities undertaken by Member States by 2030 and the rates planned to be achieved. The experience of neighboring Poland in energy efficiency promotion is analyzed, as far as the country most closely resembles Ukraine by the initial rates in 1990. We calculated conditional losses of Ukraine in 2017 as the gap between the rates of energy efficiency of Ukraine and Poland (similarity of climate conditions and the state of housing funds allowed us to assume that the comparison will be the most correct regarding Ukraine). The results of calculations make us conclude that the funds are used most efficiently if the money designated, for example, for subsidizing of population are directed at strengthening of energy efficiency (at least up to the level of neighboring country). It will result in saving of about 40 billion. This is the amount defined as Ukrainian capacity in terms of improvement of energy saving and possible results of its realization. The paper determines the stage Ukraine is at in introduction of energy efficiency measures and programs: “warm loans” program; conditions regarding energy saving in Ukraine enshrined in the EU-Ukraine Association Agreement; creation of legal basis, namely the Law of Ukraine “On Energy Efficiency Fund” as of 8 June 2017. The role of newly created Energy Efficiency Fund is analyzed. Special attention is paid to the fact that energy efficient construction is one of international liabilities undertaken by Ukraine. The presence of The Active House Alliance at Ukrainian market is an important achievement in this sphere as it is the non-profit association aiming at creation of housing concept corresponding to the sustainable development principles.


Sign in / Sign up

Export Citation Format

Share Document