Near-Fault Monitoring Reveals Combined Seismic and Slow Activation of a Fault Branch within the Istanbul–Marmara Seismic Gap in Northwest Turkey

Author(s):  
Patricia Martínez-Garzón ◽  
Virginie Durand ◽  
Stephan Bentz ◽  
Grzegorz Kwiatek ◽  
Georg Dresen ◽  
...  

Abstract Various geophysical observations show that seismic and aseismic slip on a fault may occur concurrently. We analyze microseismicity recordings from a temporary near-fault seismic network and borehole strainmeter data from the eastern Marmara region in northwest Turkey to track seismic and aseismic deformation around the hypocentral region of an Mw 4.5 earthquake in 2018. A slow transient is observed that lasted about 30 days starting at the time of the Mw 4.5 event. We study about 1200 microseismic events that occurred during 417 days after the Mw 4.5 event around the mainshock fault rupture. The seismicity reveals a strong temporal clustering, including four episodic seismic sequences, each containing more than 30 events per day. Seismicity from the first two sequences displayed typical characteristics driven by aseismic slip and/or fluids, such as the activation of a broader region around the mainshock and swarm-like topology. The third and fourth sequences correspond to typical mainshock–aftershock sequences. These observations suggest that slow slip and potentially fluid diffusion along the fault plane could have controlled the seismicity during the initial 150 days following the Mw 4.5 event. In contrast, stress redistribution and breaking of remaining asperities may have caused the activity after the initial 150 days. Our observation from a newly installed combined dense seismic and borehole strainmeter network follows an earlier observation of a slow transient occurring in conjunction with enhanced local seismic moment release in the same region. This suggests a frequent interaction of seismic and aseismic slip in the Istanbul–Marmara seismic gap.

2021 ◽  
Author(s):  
Patricia Martínez-Garzón ◽  
Virginie Durand ◽  
Stephan Bentz ◽  
Taylan Turkmen ◽  
Grzegorz Kwiatek ◽  
...  

<p>Recent laboratory and field observations show that fault seismic and aseismic slip may occur concurrently. Here, we combine microseismicity recordings from a temporary near-fault seismic network (SMARTnet) and borehole strainmeter data from the eastern Marmara region in NW Turkey to track seismic and aseismic deformation around the hypocentral region of a M<sub>W</sub> 4.5 earthquake that occurred in 2018. The strainmeter data show a clear strain signal transient starting at the time of the M<sub>W</sub> 4.5 event and lasting for about 150 days. We study about 1,200 microseismic events following the mainshock within and beyond the mainshock fault rupture. The temporal distribution of the seismicity reveals a strong temporal clustering, including four semi-periodic seismic sequences each containing more than 50 events in two days. Two seismic sequences occurred during the strain transient showing different characteristics compared to two sequences occurring afterwards. Seismicity occurring during the transient displayed typical characteristics driven by aseismic slip, such as the activation of a broader region from the mainshock, and the absence of a clear mainshock in each sequence. Seismic sequences occurring after the transient correspond to typical mainshock-aftershock sequences and activated a region closer to the original M<sub>W</sub> 4.5 mainshock. We suggest post-strain transient seismicity originate from stress redistribution and breaking of remaining asperities. Our observations from a newly installed combined dense seismic and strainmeter network in the eastern Sea of Marmara region allows identifying repeated triggering of aseismic transients within an observation period of three years suggesting these may occur more often than previously thought.</p>


An effective earthquake (Mw 7.9) struck Alaska on 3 November, 2002. This earthquake ruptured 340 km along Susitna Glacier, Denali and Totschunda faults in central Alaska. The peak ground acceleration (PGA) was recorded about 0.32 g at station PS10, which was located 3 km from the fault rupture. The PGA would have recorded a high value, if more instruments had been installed in the region. A numerical study has been conducted to find out the possible ground motion record that could occur at maximum horizontal slip during the Denali earthquake. The current study overcomes the limitation of number of elements to model the Denali fault. These numerical results are compared with observed ground motions. It is observed that the ground motions obtained through numerical analysis are in good agreement with observed ground motions. From numerical results, it is observed that the possible expected PGA is 0.62 g at maximum horizontal slip of Denali fault.


2021 ◽  
Author(s):  
Tohid Nozadkhalil ◽  
Semih Ergintav ◽  
Ziyadin Cakir ◽  
Ugur Dogan ◽  
Thomas R. Walter

<p>Westward migration of M>7 earthquakes along North Anatolian fault with the latest one, Izmit 1999 event, led focus of studies to the seismic gap in the main Marmara fault. For this purpose, the coastal ranges of the Marmara Sea, mainly Istanbul megacity, are renowned for earthquake and ground motion hazards, associated with faulting, landslides and sediment compaction processes. Ground motion associated with man-made activities, however, have been barely studied. The Thrace region of Turkey, some 50 km to the North of the Marmara Sea, expresses pronounced ground motions affecting large areas. We use the Persistent InSAR technique to monitor the Marmara region using Sentinel-1 satellites’ TOPSAR data between 2014 and 2020. Results for both ascending (T131 and T58) and descending (T36) tracks reveals 10 mm/yr rate of subsidence in the Thrace region of Turkey, affecting an area ~15400km² with dimensions of ~110 km by ~140 km. There are two plausible mechanisms for this deformation; (1) excessive pumping of groundwater for agricultural purposes, or (2) natural gas extraction activities taking place in the region. To better understand the observed deformation source, as a first step, we model potential gas extraction by volume change. No piezometric data are available for this region for the time being. Thick sediments including sandstone, reefal carbonates, amongst others, are aimed for gas exploration in the Thrace basin for more than half century. Depth of gas extraction wells and sediment thickness is compiled from previous studies to compare the subsided area with sediment and well depth variations. </p><p>We use  the Poly3D boundary element method to model the surface. Poly3D uses planar triangular elements of constant model to model displacement’s source. Using triangular elements provides models with complex and smooth 3D surfaces avoiding overlaps or gaps, and hence allowing one to construct realistic models. Poly3dinv inverse model applies a fast non-negative/non-positive least squares solver to optimize the solution. We construct a surface enveloping tips of the wells and use it to produce deformation at surface due by allowing opening on it. Small residuals between the observation and model based on opening suggests that deformation is likely caused by natural gas extraction.</p>


2020 ◽  
Vol 2020 ◽  
pp. 1-17
Author(s):  
Vui Van Cao ◽  
Son Quang Pham

The literature related to earthquakes and fibre reinforced polymer (FRP) retrofitting can be divided into two main categories: (1) the applications of FRP to retrofit structures subjected to single traditional earthquakes and (2) the effects of mainshock-aftershock sequences on original structures (without FRP retrofitting). Research on using FRP to mitigate the risk of pulse-type mainshock-aftershock sequences for reinforced concrete (RC) structures located in near-fault regions is hardly found in the literature and is thus the aim of this study. To achieve this aim, a four-storey RC frame, near-fault mainshocks, and seismic sequences were selected. The frame was retrofitted using FRP wraps at plastic hinge locations. Nonlinear time history and damage analyses of the original and FRP-retrofitted frames subjected to these near-fault mainshocks and seismic sequences were conducted. The results showed that aftershocks significantly increase the damage indices of the frames, shifting the damage state of the original frame from severe damage to collapse and the damage state of the FRP-retrofitted frame from light damage to moderate damage. FRP retrofitting successfully reduced the risk of seismic sequences by reducing the damage two levels, shifting the damage state of the original frame from collapse to moderate damage.


2020 ◽  
Author(s):  
Tom Winder ◽  
Robert S. White

<p>Swarms of microearthquakes on a network of conjugate strike-slip faults in the rift zone in Central Iceland have been detected and located using a dense local seismic network operational since 2007. These swarms have been recorded since the 1970s, but the cause of their clear swarm-like nature remains enigmatic.</p><p>We use the QuakeMigrate earthquake detection and location software – which is able to detect earthquakes separated by very small inter-event times – to produce a highly complete catalogue. Automatic hypocentre locations have been refined using waveform cross-correlation and double-difference relocation, and focal mechanisms and manual earthquake locations have been produced for a subset of events by manual picking. Analysis of the resulting high-resolution earthquake catalogue reveals systematic migration of hypocentres at velocities of ~ 1 km/day along sharply defined fault planes ranging from 1 – 10 km in length. In the majority of swarms we also observe clusters of identical repeating events, providing evidence for re-loading of the brittle asperities that produce earthquakes.</p><p>For a selection of swarms, our high resolution seismic observations are complemented by GPS and InSAR measurements, allowing us to constrain the amount of fault slip. Comparing this, and the area of the fault plane activated in the swarm, to the seismic moment release reveals a significant contribution of aseismic slip, or very low effective stress drop. Analysis of swarms triggered on these faults by the static coulomb stress increase induced by the 2014 Bárðarbunga-Holuhraun dike intrusion provides a further estimate of the amplitude of the stress cycle.</p><p>We combine our observations with comparisons to numerical & laboratory modelling studies, observed swarm scaling properties and knowledge of the geological and permeability structure of the Icelandic crust to determine the nature of the transient forcing driving these exceptionally well-recorded tectonic earthquake swarms.</p>


2019 ◽  
Vol 510 ◽  
pp. 209-218 ◽  
Author(s):  
Patricia Martínez-Garzón ◽  
Marco Bohnhoff ◽  
David Mencin ◽  
Grzegorz Kwiatek ◽  
Georg Dresen ◽  
...  

2021 ◽  
Author(s):  
Virginie Durand ◽  
Patricia Martínez-Garzón ◽  
Adriano Gualandi ◽  
Mahmud Haghighi ◽  
Mahdi Motagh ◽  
...  

<p>More and more studies worldwide show that seismic and aseismic slip can occur jointly, impacting the seismic hazard in a region. It is thus important to be able to reconstruct the deformation partitioning and fault interactions. In this study, we focus on the eastern Sea of Marmara region south of the megalopolis of Istanbul (Turkey). In this region, the plate-bounding North Anatolian Fault (NAF) is splitting into several branches. The northern branch is locked and is considered to host the nucleation zone of a M~7 earthquake expected for the region. In 2016, a 3-days long foreshock sequence preceded a M<sub>W</sub> 4.2 event located at the junction of the two or more sub-branches. It has been argued that this sequence may have been driven by aseismic slip involved in the earthquake nucleation (Malin et al., 2018). Starting around the time of this earthquake, a large strain signal, lasting 50 days, was identified on a single strainmeter station located ~30km from the M4.2 epicenter (Martinez-Garzon et al., 2019). To better characterize this sequence, we revisit it adding new types of data: we analyze GPS and InSAR data together with reprocessed strainmeter recordings of all the availaible stations in the region during 18 months framing the observed strain signal. To enhance the tectonic features in the strainmeter data, we apply a variational Bayesian Independent Component Analysis (vbICA, Gualandi et al. 2015). Following the M4.2 earthquake, we highlight a 50 km westward migration of the seismicity starting from its epicentral area and lasting 6 months. Increases in the seismic activity correspond to variations in the tectonic components of the recordings at two nearby strainmeters. The first changes in seismicity and strainmeter data occur 2.5 months before the M<sub>W</sub>4.2 event, and are also concomitant with a variation in the trend of the GPS data. The GPS data, along with the strainmeter ones, exhibit a second clear change at the time of the mainshock, that is also lasting two months. Similarly, the InSAR data highlight a variation in the time series around the time of the earthquake, lasting several weeks. The combination of these different types of measurements covering various signal-frequency bands of deformation in the eastern Sea of Marmara highlights the presence of a measurable large-scale and long-lasting deformation transient that begins and ends several weeks before and after the occurrence of a Mw4.2 earthquake. These observations show that further reducing the observational gap both in terms of detection threshold and frequency band allows to decipher signals that usually remain undetected. This is non-trivial but relevant for seismic hazard and risk assessment especially in case of submarine faults collocated with population centers, as is the case of the study region.</p>


Sign in / Sign up

Export Citation Format

Share Document