scholarly journals Pemetaan batuan penyusun candi di bawah permukaan berdasarkan metode geomagnetik studi kasus: cagar budaya candi Songgiriti desa Songgokerto kecamatan Batu kota Batu

2021 ◽  
Vol 2 (1) ◽  
pp. 11-18
Author(s):  
Agus Riyanto ◽  
Siti Zulaikah ◽  
Daeng Achmad Suaidi
Keyword(s):  
Magnetic Field ◽  
Magnetic Susceptibility ◽  
Cultural Heritage ◽  
Mineral Exploration ◽  
Analysis Data ◽  
Local Magnetic Field ◽  
Cross Sectional ◽  
Sample Number ◽  
Magnetometer Data ◽  
Archaeological Objects

The geomagnetic method is often used in petroleum, geothermal and mineral exploration and can be applied to searching prospect archaeological objects (Siahaan, 2009). Several studies has been used the geomagnetic method to seek for archaeological objects by Ariani (2012) in Losari Temples and Sismanto et al (1997) in Kedulan Temple. In Batu City there is one of the cultural heritage that have not been intact called Songgoriti Temple. So, in this research we expected the existence of temple’s rocks using geomagnetic method. The de sign of the research using geomagnetic methods begins with the study of litera ture. This research was conducted with two methods there is calculating the val ue of the magnetic susceptibility of samples Temple’s rock using Bartington Susceptibility Meter MS2B and retrieving data field using the Proton magneto meter type ENVI SCINTREX. In the end of this research, we accepted the re sults of the two methods were compared to find out the site rock of temple. In magnetometer data analysis, data is processed using Magpick software, surfer 9.0 software and Mag2dc software. The results of the research show that a local magnetic field patterns of rocks in the area of cultural heritage Songgoriti Tem ple is divided into three parts namely high local magnetic field (yellow to red), the moderate local magnetic field (green to yellow) and low local magnetic field (blue). Furthermore based on five cross-sectional modeling using Mag2dc, we obtained the prediction the site of temple Songgoriti that is the sample number 1 found on the 2 position i.e at coordinates 49S 664547.5m 9130115m and coor dinate 49S 664585m 9130105m; sample number 3 found on the 2 position i.e at coordinates 49S 664583m 9130100m and coordinate 49S 664585m 9130100m; sample number 4 found on the 2 position i.e. at coordinates 49S 664577.5m 9130115m and coordinate 49S 664577.5m 9130110m; sample number 5 found on the 3 position i.e. at coordinates 49S 664566m 9130095m, coordinates 49S 664573m 9130095m and coordinate 49S 664582.5 m 9130095m; sample num ber 6 is found in 5 position i.e. at coordinates 49S 664545.5 m 9130110m, coordinates 49S 664550m 9130110m, coordinates 49S 664546m 9130105m, coordinates 49S 664565m 9130105m and coordinates 49S 664562.5 m 9130100m. For sample number 2 that is not found at all in the five models cross section. This may be caused by the value of the magnetic susceptibility sample number 2 is minor when compared to another samples that is 0.86 x 10-6 m3/kg

scholarly journals Cluster spacecraft observations of a ULF wave enhanced by Space Plasma Exploration by Active Radar (SPEAR)

2009 ◽  
Vol 27 (9) ◽  
pp. 3591-3599 ◽  
Author(s):  
S. V. Badman ◽  
D. M. Wright ◽  
L. B. N. Clausen ◽  
R. C. Fear ◽  
T. R. Robinson ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Field Line ◽  
Space Plasma ◽  
Local Magnetic Field ◽  
Field Line Resonance ◽  
Ionospheric Heating ◽  
Ulf Wave ◽  
Line Resonance ◽  
Magnetometer Data ◽  
Field Lines

Abstract. Space Plasma Exploration by Active Radar (SPEAR) is a high-latitude ionospheric heating facility capable of exciting ULF waves on local magnetic field lines. We examine an interval from 1 February 2006 when SPEAR was transmitting a 1 Hz modulation signal with a 10 min on-off cycle. Ground magnetometer data indicated that SPEAR modulated currents in the local ionosphere at 1 Hz, and enhanced a natural field line resonance with a 10 min period. During this interval the Cluster spacecraft passed over the heater site. Signatures of the SPEAR-enhanced field line resonance were present in the magnetic field data measured by the magnetometer on-board Cluster-2. These are the first joint ground- and space-based detections of field line tagging by SPEAR.

scholarly journals MRI-Based Quantification of Magnetic Susceptibility in Gel Phantoms: Assessment of Measurement and Calculation Accuracy

2018 ◽  
Vol 2018 ◽  
pp. 1-13
Author(s):  
Emma Olsson ◽  
Ronnie Wirestam ◽  
Emelie Lind
Keyword(s):  
Magnetic Field ◽  
Magnetic Susceptibility ◽  
Contrast Agent ◽  
Calculated Data ◽  
Local Magnetic Field ◽  
Main Magnetic Field ◽  
Magic Angle ◽  
Venous Oxygen Saturation ◽  
Tissue Contrast ◽  
Concentration Of Contrast Agent

The local magnetic field inside and around an object in a magnetic resonance imaging unit depends on the magnetic susceptibility of the object being magnetized, in combination with its geometry/orientation. Magnetic susceptibility can thus be exploited as a source of tissue contrast, and susceptibility imaging may also become a useful tool in contrast agent quantification and for assessment of venous oxygen saturation levels. In this study, the accuracy of an established procedure for quantitative susceptibility mapping (QSM) was investigated. Three gel phantoms were constructed with cylinders of varying susceptibility and geometry. Experimental results were compared with simulated and analytically calculated data. An expected linear relationship between estimated susceptibility and concentration of contrast agent was observed. Less accurate QSM-based susceptibility values were observed for cylindrical objects at angles, relative to the main magnetic field, that were close to or larger than the magic angle. Results generally improved for large objects/high spatial resolution and large volume coverage. For simulated phase maps, accurate susceptibility quantification by QSM was achieved also for more challenging geometries. The investigated QSM algorithm was generally robust to changes in measurement and calculation parameters, but experimental phase data of sufficient quality may be difficult to obtain in certain geometries.

An Augmented Iteratively Re-weighted and Refined Least Squares Method for lp Minimization Problem in Inverse Modeling of Potential Field Magnetic Data

2020 ◽  
Vol 1 (3) ◽  
Author(s):  
Maysam Abedi
Keyword(s):  
Magnetic Field ◽  
Magnetic Susceptibility ◽  
Least Squares ◽  
Minimization Problem ◽  
Potential Field ◽  
Field Data ◽  
Least Squares Method ◽  
Porphyry Copper ◽  
Magnetic Data ◽  
Magnetic Field Data

The presented work examines application of an Augmented Iteratively Re-weighted and Refined Least Squares method (AIRRLS) to construct a 3D magnetic susceptibility property from potential field magnetic anomalies. This algorithm replaces an lp minimization problem by a sequence of weighted linear systems in which the retrieved magnetic susceptibility model is successively converged to an optimum solution, while the regularization parameter is the stopping iteration numbers. To avoid the natural tendency of causative magnetic sources to concentrate at shallow depth, a prior depth weighting function is incorporated in the original formulation of the objective function. The speed of lp minimization problem is increased by inserting a pre-conditioner conjugate gradient method (PCCG) to solve the central system of equation in cases of large scale magnetic field data. It is assumed that there is no remanent magnetization since this study focuses on inversion of a geological structure with low magnetic susceptibility property. The method is applied on a multi-source noise-corrupted synthetic magnetic field data to demonstrate its suitability for 3D inversion, and then is applied to a real data pertaining to a geologically plausible porphyry copper unit.  The real case study located in  Semnan province of  Iran  consists  of  an arc-shaped  porphyry  andesite  covered  by  sedimentary  units  which  may  have  potential  of  mineral  occurrences, especially  porphyry copper. It is demonstrated that such structure extends down at depth, and consequently exploratory drilling is highly recommended for acquiring more pieces of information about its potential for ore-bearing mineralization.

scholarly journals Cultural heritage science at CNA (seville, Spain): Applications of XRF and IBA techniques to art and archaeological objects.

2020 ◽  
Vol 167 ◽  
pp. 108324 ◽  
Author(s):  
F.J. Ager ◽  
M.A. Respaldiza ◽  
S. Scrivano ◽  
I. Ortega-Feliu ◽  
A. Kriznar ◽  
...  
Keyword(s):  
Cultural Heritage ◽  
Heritage Science ◽  
Archaeological Objects

Experimental investigation and optimization on field shaper structure parameters in magnetic pulse welding

2021 ◽  
pp. 095440542110148
Author(s):  
Yingzi Chen ◽  
Zhiyuan Yang ◽  
Wenxiong Peng ◽  
Huaiqing Zhang
Keyword(s):  
Magnetic Field ◽  
High Speed ◽  
Light Metal ◽  
Magnetic Pulse ◽  
Cross Sectional ◽  
Magnetic Pulse Welding ◽  
Pulse Welding ◽  
Sectional Shape ◽  
Welding System ◽  
The Magnetic Field

Magnetic pulse welding is a high-speed welding technology, which is suitable for welding light metal materials. In the magnetic pulse welding system, the field shaper can increase the service life of the coil and contribute to concentrating the magnetic field in the welding area. Therefore, optimizing the structure of the field shaper can effectively improve the efficiency of the system. This paper analyzed the influence of cross-sectional shape and inner angle of the field shaper on the ability of concentrating magnetic field via COMSOL software. The structural strength of various field shapers was also analyzed in ABAQUS. Simulation results show that the inner edge of the field shaper directly affects the deformation and welding effect of the tube. So, a new shape of field shaper was proposed and the experimental results prove that the new field shaper has better performance than the conventional field shaper.

scholarly journals Optical Imaging of Magnetic Particle Cluster Oscillation and Rotation in Glycerol

2021 ◽  
Vol 7 (5) ◽  
pp. 82
Author(s):  
River Gassen ◽  
Dennis Thompkins ◽  
Austin Routt ◽  
Philippe Jones ◽  
Meghan Smith ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Magnetic Fields ◽  
Magnetic Particles ◽  
Magnetic Particle ◽  
Barium Hexaferrite ◽  
Optical Microscope ◽  
Simplified Model ◽  
Particle Cluster ◽  
Average Deviation ◽  
Cross Sectional

Magnetic particles have been evaluated for their biomedical applications as a drug delivery system to treat asthma and other lung diseases. In this study, ferromagnetic barium hexaferrite (BaFe12O19) and iron oxide (Fe3O4) particles were suspended in water or glycerol, as glycerol can be 1000 times more viscous than water. The particle concentration was 2.50 mg/mL for BaFe12O19 particle clusters and 1.00 mg/mL for Fe3O4 particle clusters. The magnetic particle cluster cross-sectional area ranged from 15 to 1000 μμm2, and the particle cluster diameter ranged from 5 to 45 μμm. The magnetic particle clusters were exposed to oscillating or rotating magnetic fields and imaged with an optical microscope. The oscillation frequency of the applied magnetic fields, which was created by homemade wire spools inserted into an optical microscope, ranged from 10 to 180 Hz. The magnetic field magnitudes varied from 0.25 to 9 mT. The minimum magnetic field required for particle cluster rotation or oscillation in glycerol was experimentally measured at different frequencies. The results are in qualitative agreement with a simplified model for single-domain magnetic particles, with an average deviation from the model of 1.7 ± 1.3. The observed difference may be accounted for by the fact that our simplified model does not include effects on particle cluster motion caused by randomly oriented domains in multi-domain magnetic particle clusters, irregular particle cluster size, or magnetic anisotropy, among other effects.

Sign in / Sign up

Export Citation Format

Share Document