Actors for the Internet of Things

2021 ◽  
Author(s):  
Arjun Shukla
Keyword(s):  
Message Passing ◽  
High Performance ◽  
Distributed Programming ◽  
Single Server ◽  
Actor Model ◽  
Levels Of Abstraction ◽  
Message Type ◽  
Concurrent Computation ◽  
Iot Devices ◽  
The Internet Of Things

The actor model is a model for concurrent computation, centered around message passing between entities in a system. It is well suited for distributed programming, due to its semantics including very little guarantees or assumptions of reliability. Actor model implementations have grown more widespread in many languages. The library Akka (written in Scala) is one of the most popular actor libraries. However, Akka is missing some key features. Our goal is to create our own actor library called Aurum, which not only has these features but exhibits higher performance. The new features include easy ways to forge references, configure and launch clusters, message type translations, and the ability to inject message drops and delays into every part the application. Aurum will be implemented in Rust, a programming language designed for high performance, asynchrony and high levels of abstraction that is well suited for IoT devices. Our results show that Aurum outperforms Akka. In our benchmarks, a single server running Aurum gives three times the throughput as an equivalent Akka server, while maintaining good programmability and having features useful for IoT.

scholarly journals An Easy-to-Integrate IP Design of AHB Slave Bus Interface for the Security Chip of IoT

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Conggui Yuan ◽  
Xin Zheng ◽  
Bo Rao ◽  
Shuting Cai
Keyword(s):  
High Performance ◽  
Random Number Generator ◽  
Control Logic ◽  
Iot Security ◽  
Interface Control ◽  
Important Means ◽  
Security Module ◽  
Iot Devices ◽  
On Chip ◽  
The Internet Of Things

Information security is fundamental to the Internet of things (IoT) devices, in which security chip is an important means. This paper proposes an Advanced High-performance Bus Slave Control IP (AHB-SIP), which applies to cryptographic accelerators in IoT security chips. Composed by four types of function registers and AHB Interface Control Logic (AICL), AHB-SIP has a simple and easy-to-use structure. The System on Chip (SoC) design can be realized by quickly converting the nonstandard interface of the security module to the AHB slave interface. AHB-SIP is applied to the security accelerators of SM2, SM3, and SM4 and random number generator (RNG). Combined with a low-power embedded CPU, TIMER, UART, SPI, IIC, and other communication interfaces, a configurable SoC can be integrated. Moreover, SMIC 110 nm technology is employed to tape out the SoC on a silicon chip. The area of AHB-SIP is 0.072 mm2, only occupying 6‰ of the chip (3.45 ∗ 3.45 mm2), and the power consumption of encryption modules combined with AHB-SIP is lower than that combined with AXI interface, which is decreased up to 61.0% and is ideal for the application of IoT.

scholarly journals Hardware Implementation of Secure Lightweight Cryptographic Designs for IoT Applications

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Wajih El Hadj Youssef ◽  
Ali Abdelli ◽  
Fethi Dridi ◽  
Mohsen Machhout
Keyword(s):  
High Performance ◽  
Security Analysis ◽  
Smart Devices ◽  
Security Level ◽  
Test Results ◽  
Cryptographic Primitives ◽  
Application Deployment ◽  
Iot Devices ◽  
The Internet Of Things ◽  
Constrained Devices

The recent expansion of the Internet of Things is creating a new world of smart devices in which security implications are very significant. Besides the claimed security level, the IoT devices are usually featured with constrained resources, such as low computation capability, low memory, and limited battery. Lightweight cryptographic primitives are proposed in the context of IoT while considering the trade-off between security guarantee and good performance. In this paper, we present optimized hardware, lightweight cryptographic designs, of 32-bit datapath, LED 64/128, SIMON 64/128, and SIMECK 64/128 algorithms, for constrained devices. Our proposed designs are investigated on Spartan-3, Spartan-6, and Zynq-7000 FPGA platforms in terms of area, speed, efficiency, and power consumption. The proposed designs achieved a high throughput up to 891.99 Mbps, 838.95 Mbps, and 210.13 Mbps for SIMECK 64/128, SIMON 64/128, and LED 64/128 on Zynq-7000, respectively. A deep comparison between our three proposed designs is elaborated on different FPGA families for adequate FPGAs-based application deployment. Test results and security analysis show that not only can our proposed designs achieve good encryption results with high performance and a low reduced cost but also they are secure enough to resist statistical attacks.

Multi-level Parallelization of Genotype Imputation on Supercomputers

2020 ◽  
Vol 15 ◽  
Author(s):  
Weiwen Zhang ◽  
Long Wang ◽  
Theint Theint Aye ◽  
Juniarto Samsudin ◽  
Yongqing Zhu
Keyword(s):  
Association Study ◽  
Message Passing ◽  
High Performance ◽  
Message Passing Interface ◽  
Genome Wide Association Study ◽  
Job Scheduling ◽  
Genotype Imputation ◽  
Job Level ◽  
Multi Level ◽  
High Performance Requirement

Background: Genotype imputation as a service is developed to enable researchers to estimate genotypes on haplotyped data without performing whole genome sequencing. However, genotype imputation is computation intensive and thus it remains a challenge to satisfy the high performance requirement of genome wide association study (GWAS). Objective: In this paper, we propose a high performance computing solution for genotype imputation on supercomputers to enhance its execution performance. Method: We design and implement a multi-level parallelization that includes job level, process level and thread level parallelization, enabled by job scheduling management, message passing interface (MPI) and OpenMP, respectively. It involves job distribution, chunk partition and execution, parallelized iteration for imputation and data concatenation. Due to the design of multi-level parallelization, we can exploit the multi-machine/multi-core architecture to improve the performance of genotype imputation. Results: Experiment results show that our proposed method can outperform the Hadoop-based implementation of genotype imputation. Moreover, we conduct the experiments on supercomputers to evaluate the performance of the proposed method. The evaluation shows that it can significantly shorten the execution time, thus improving the performance for genotype imputation. Conclusion: The proposed multi-level parallelization, when deployed as an imputation as a service, will facilitate bioinformatics researchers in Singapore to conduct genotype imputation and enhance the association study.

Agricultural Application of Web of Things Architecture

Impact ◽  
2019 ◽  
Vol 2019 (10) ◽  
pp. 61-63 ◽  
Author(s):  
Akihiro Fujii
Keyword(s):  
Internet Of Things ◽  
Agricultural Sector ◽  
Electronic Device ◽  
Specific Work ◽  
Science And Engineering ◽  
Unique Identifier ◽  
Agricultural Application ◽  
Iot Devices ◽  
The Internet Of Things ◽  
Type Pressure

The Internet of Things (IoT) is a term that describes a system of computing devices, digital machines, objects, animals or people that are interrelated. Each of the interrelated 'things' are given a unique identifier and the ability to transfer data over a network that does not require human-to-human or human-to-computer interaction. Examples of IoT in practice include a human with a heart monitor implant, an animal with a biochip transponder (an electronic device inserted under the skin that gives the animal a unique identification number) and a car that has built-in sensors which can alert the driver about any problems, such as when the type pressure is low. The concept of a network of devices was established as early as 1982, although the term 'Internet of Things' was almost certainly first coined by Kevin Ashton in 1999. Since then, IoT devices have become ubiquitous, certainly in some parts of the world. Although there have been significant developments in the technology associated with IoT, the concept is far from being fully realised. Indeed, the potential for the reach of IoT extends to areas which some would find surprising. Researchers at the Faculty of Science and Engineering, Hosei University in Japan, are exploring using IoT in the agricultural sector, with some specific work on the production of melons. For the advancement of IoT in agriculture, difficult and important issues are implementation of subtle activities into computers procedure. The researchers challenges are going on.

scholarly journals IoT Traffic: Modeling and Measurement Experiments

IoT ◽  
2021 ◽  
Vol 2 (1) ◽  
pp. 140-162
Author(s):  
Hung Nguyen-An ◽  
Thomas Silverston ◽  
Taku Yamazaki ◽  
Takumi Miyoshi
Keyword(s):  
Smart Home ◽  
Large Scale ◽  
Traffic Modeling ◽  
The Novel ◽  
Network Behavior ◽  
Performance Accuracy ◽  
Traffic Generator ◽  
Multiple Devices ◽  
Iot Devices ◽  
The Internet Of Things

We now use the Internet of things (IoT) in our everyday lives. The novel IoT devices collect cyber–physical data and provide information on the environment. Hence, IoT traffic will count for a major part of Internet traffic; however, its impact on the network is still widely unknown. IoT devices are prone to cyberattacks because of constrained resources or misconfigurations. It is essential to characterize IoT traffic and identify each device to monitor the IoT network and discriminate among legitimate and anomalous IoT traffic. In this study, we deployed a smart-home testbed comprising several IoT devices to study IoT traffic. We performed extensive measurement experiments using a novel IoT traffic generator tool called IoTTGen. This tool can generate traffic from multiple devices, emulating large-scale scenarios with different devices under different network conditions. We analyzed the IoT traffic properties by computing the entropy value of traffic parameters and visually observing the traffic on behavior shape graphs. We propose a new method for identifying traffic entropy-based devices, computing the entropy values of traffic features. The method relies on machine learning to classify the traffic. The proposed method succeeded in identifying devices with a performance accuracy up to 94% and is robust with unpredictable network behavior with traffic anomalies spreading in the network.

scholarly journals Secure the IoT Networks as Epidemic Containment Game

Symmetry ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 156
Author(s):  
Juntao Zhu ◽  
Hong Ding ◽  
Yuchen Tao ◽  
Zhen Wang ◽  
Lanping Yu
Keyword(s):  
Heuristic Algorithms ◽  
Heuristic Method ◽  
Exact Algorithms ◽  
Epidemic Threshold ◽  
Solution Quality ◽  
Sis Model ◽  
Linear Programming Formulation ◽  
Iot Devices ◽  
General Graphs ◽  
The Internet Of Things

The spread of a computer virus among the Internet of Things (IoT) devices can be modeled as an Epidemic Containment (EC) game, where each owner decides the strategy, e.g., installing anti-virus software, to maximize his utility against the susceptible-infected-susceptible (SIS) model of the epidemics on graphs. The EC game’s canonical solution concepts are the Minimum/Maximum Nash Equilibria (MinNE/MaxNE). However, computing the exact MinNE/MaxNE is NP-hard, and only several heuristic algorithms are proposed to approximate the MinNE/MaxNE. To calculate the exact MinNE/MaxNE, we provide a thorough analysis of some special graphs and propose scalable and exact algorithms for general graphs. Especially, our contributions are four-fold. First, we analytically give the MinNE/MaxNE for EC on special graphs based on spectral radius. Second, we provide an integer linear programming formulation (ILP) to determine MinNE/MaxNE for the general graphs with the small epidemic threshold. Third, we propose a branch-and-bound (BnB) framework to compute the exact MinNE/MaxNE in the general graphs with several heuristic methods to branch the variables. Fourth, we adopt NetShiled (NetS) method to approximate the MinNE to improve the scalability. Extensive experiments demonstrate that our BnB algorithm can outperform the naive enumeration method in scalability, and the NetS can improve the scalability significantly and outperform the previous heuristic method in solution quality.

Maximizing piezoelectricity by self-assembled highly porous perovskite–polymer composite films to enable the internet of things

2020 ◽  
Vol 8 (27) ◽  
pp. 13619-13629 ◽  
Author(s):  
Asif Abdullah Khan ◽  
Md Masud Rana ◽  
Guangguang Huang ◽  
Nanqin Mei ◽  
Resul Saritas ◽  
...  
Keyword(s):  
Internet Of Things ◽  
Polymer Composite ◽  
High Performance ◽  
Composite Films ◽  
The Internet ◽  
Next Generation ◽  
Self Assembled ◽  
Self Powered ◽  
The Internet Of Things ◽  
Highly Porous

A high-performance perovskite/polymer piezoelectric nanogenerator for next generation self-powered wireless micro/nanodevices.

scholarly journals Transparent CoAP Services to IoT Endpoints through ICN Operator Networks

Sensors ◽  
2019 ◽  
Vol 19 (6) ◽  
pp. 1339 ◽  
Author(s):  
Hasan Islam ◽  
Dmitrij Lagutin ◽  
Antti Ylä-Jääski ◽  
Nikos Fotiou ◽  
Andrei Gurtov
Keyword(s):  
Storage Capacity ◽  
Communication Overhead ◽  
Full Potential ◽  
Core Network ◽  
Computation Complexity ◽  
State Management ◽  
Iot Devices ◽  
Novel Applications ◽  
And Storage ◽  
The Internet Of Things

The Constrained Application Protocol (CoAP) is a specialized web transfer protocol which is intended to be used for constrained networks and devices. CoAP and its extensions (e.g., CoAP observe and group communication) provide the potential for developing novel applications in the Internet-of-Things (IoT). However, a full-fledged CoAP-based application may require significant computing capability, power, and storage capacity in IoT devices. To address these challenges, we present the design, implementation, and experimentation with the CoAP handler which provides transparent CoAP services through the ICN core network. In addition, we demonstrate how the CoAP traffic over an ICN network can unleash the full potential of the CoAP, shifting both overhead and complexity from the (constrained) endpoints to the ICN network. The experiments prove that the CoAP Handler helps to decrease the required computation complexity, communication overhead, and state management of the CoAP server.

A high-performance, portable implementation of the MPI message passing interface standard

1996 ◽  
Vol 22 (6) ◽  
pp. 789-828 ◽  
Author(s):  
William Gropp ◽  
Ewing Lusk ◽  
Nathan Doss ◽  
Anthony Skjellum
Keyword(s):  
Message Passing ◽  
High Performance ◽  
Message Passing Interface
Sign in / Sign up

Export Citation Format

Share Document