scholarly journals Geologic observations in the San Marcos area, Coahuila, Mexico: the case for sediment-hosted stratiform copper–silver mineralization in the Sabinas basin during the Laramide orogeny

2021 ◽  
Vol 73 (3) ◽  
pp. A160321
Author(s):  
José Perelló
Keyword(s):  
Structural Control ◽  
Large Scale ◽  
Hanging Wall ◽  
Surface Expression ◽  
Fault System ◽  
Structural Controls ◽  
San Marcos ◽  
Orogenic Uplift ◽  
Redox Boundary ◽  
Silver Mineralization

The sediment-hosted stratiform copper–silver mineralization in the San Marcos area of Coahuila, northeastern Mexico occurs predominantly at an Early Cretaceous redox boundary between footwall siliciclastic red beds of the San Marcos Formation and hanging-wall carbonate strata of the Cupido Formation in the Sabinas basin. The hypogene mineralization is mainly present as chalcocite-group minerals, with additional bornite and chalcopyrite, and everywhere occurs in both disseminated and vein/veinlet forms. Supergene copper-bearing oxides (malachite, chalcanthite, azurite, chrysocolla) are, however, the dominant surface expression of the mineralization. Additional sediment-hosted stratiform copper–silver mineralization also occurs, albeit erratically, in lower strata of the Sabinas basin as well as in veins in basement granitoids, thus spanning ~3000 m of basin stratigraphy. Where best developed, the stratiform mineralization displays intense structural control proximal to the regional San Marcos fault system. This major bounding fault, regional in nature and with numerous periods of activity, controlled the evolution of the Sabinas basin. Structural controls on mineralization include stacked, shallow-angle, bedding-parallel, northeast-vergent thrust faults and associated drag folds, in addition to numerous, steeply-dipping, northeast-trending copper-bearing veins and veinlets. The mineralized veins and veinlets, and the bedding-parallel thrusts display mutually crosscutting relationships. These elements are all consistent and in harmony with a regional northeast-trending direction of horizontal shortening accompanying reverse motion of the San Marcos fault system. Inversion along the San Marcos fault system, and the entire Sabinas basin in the Paleogene from ~60 to 40 Ma, resulted from wholesale contractional deformation during the Laramide (Mexican) orogeny. Hence, emplacement of the sediment-hosted stratiform copper–silver mineralization at San Marcos, and elsewhere in the larger Coahuila region, is interpreted as a natural corollary of large-scale, metal-bearing fluid expulsion, migration, and precipitation resulting from orogenic shortening, lithostatic loading, and squeezing of the Sabinas basin during Mexican orogen construction. Although sedimentation of the host strata in the Sabinas basin took place in a pericratonic setting associated with the opening of the Gulf of Mexico, sediment-hosted stratiform copper-silver mineralization occurred during orogenic uplift and conversion of the original basin into an orogen-foreland pair, with similarities to some of the world´s largest sediment-hosted stratiform copper provinces.

Terranes

1992 ◽  
Vol 13 (1) ◽  
pp. 1-4 ◽  
Author(s):  
B. J. Bluck ◽  
W. Gibbons ◽  
J. K. Ingham
Keyword(s):  
Hanging Wall ◽  
Fault System ◽  
Upper Proterozoic ◽  
Lower Proterozoic ◽  
Central Highland ◽  
Thrust Zone ◽  
Lower Palaeozoic ◽  
Moine Thrust Zone ◽  
Shallow Marine Sediments ◽  
Northern Highlands

AbstractThe Precambrian and Lower Palaeozoic foundations of the British Isles may be viewed as a series of suspect terranes whose exposed boundaries are prominent fault systems of various kinds, each with an unproven amount of displacement. There are indications that they accreted to their present configuration between late Precambrian and Carboniferous times. From north to south they are as follows.In northwest Scotland the Hebridean terrane (Laurentian craton in the foreland of the Caledonian Orogen) comprises an Archaean and Lower Proterozoic gneissose basement (Lewisian) overlain by an undeformed cover of Upper Proterozoic red beds and Cambrian to early mid Ordovician shallow marine sediments. The terrane is cut by the Outer Isles Thrust, a rejuvenated Proterozoic structure, and is bounded to the southeast by the Moine Thrust zone, within the hanging wall of which lies a Proterozoic metamorphic complex (Moine Supergroup) which constitutes the Northern Highlands terrane. The Moine Thrust zone represents an essentially orthogonal closure of perhaps 100 km which took place during Ordovician-Silurian times (Elliott & Johnson 1980). The Northern Highlands terrane records both Precambrian and late Ordovician to Silurian tectonometamorphic events (Dewey & Pankhurst 1970) and linkage with the Hebridean terrane is provided by slices of reworked Lewisian basement within the Moine Supergroup (Watson 1983).To the southwest of the Great Glen-Walls Boundary Fault system lies the Central Highlands (Grampian) terrane, an area dominated by the late Proterozoic Dalradian Supergroup which is underlain by a gneissic complex (Central Highland Granulites) that has been variously interpreted as either older

The Accumulation Rules of Budate Burial Hill Hydrocarbon Reservoir of Suderte Oilfield in Hailar Basin

2015 ◽  
Vol 733 ◽  
pp. 140-143
Author(s):  
Jin Hang Cai
Keyword(s):  
Source Rock ◽  
Large Scale ◽  
Metamorphic Rock ◽  
Fault System ◽  
Migration Ability ◽  
Accumulation Pattern ◽  
Hydrocarbon Reservoir ◽  
Oil Storage ◽  
Hailar Basin ◽  
Unconformity Surface

Metamorphic rock burial hill reservoir of Beier rift in Hailaer Basin, with large scale reservoir and high output has complex fault system. The fault through going direction roughly is NEE direction, and has wide fault section and lateral quickly changed fault displacement. Metamorphic rock reservoir can be divided into the vertical weathered fracture zone, crack and dissolved pores and caves development belt and tight zone. Accumulation is controlled by hydrocarbon ability of source rock, contacting relationship of source rock and reservoir, oil storage ability of reservoir, and vertical and lateral hydrocarbon migration ability of fault and unconformity surface. And formed top surface weathering crust accumulation pattern which the hydrocarbon migrated laterally along the unconformity surface, and interior reservoir pattern of crack broken zone accumulation which hydrocarbon migrated vertically along fault.

scholarly journals Exploring the shallow structure of the San Ramón thrust fault in Santiago, Chile (~33.5° S), using active seismic and electric methods

Solid Earth ◽  
2014 ◽  
Vol 5 (2) ◽  
pp. 837-849 ◽  
Author(s):  
D. Díaz ◽  
A. Maksymowicz ◽  
G. Vargas ◽  
E. Vera ◽  
E. Contreras-Reyes ◽  
...  
Keyword(s):  
Seismic Anisotropy ◽  
Average Length ◽  
Sedimentary Cover ◽  
Hanging Wall ◽  
Thrust Fault ◽  
Fault System ◽  
Surface Rupture ◽  
Thrust Tectonics ◽  
Rock Substratum ◽  
Fault Scarps

Abstract. The crustal-scale west-vergent San Ramón thrust fault system, which lies at the foot of the main Andean Cordillera in central Chile, is a geologically active structure with manifestations of late Quaternary complex surface rupture on fault segments along the eastern border of the city of Santiago. From the comparison of geophysical and geological observations, we assessed the subsurface structural pattern that affects the sedimentary cover and rock-substratum topography across fault scarps, which is critical for evaluating structural models and associated seismic hazard along the related faults. We performed seismic profiles with an average length of 250 m, using an array of 24 geophones (Geode), with 25 shots per profile, to produce high-resolution seismic tomography to aid in interpreting impedance changes associated with the deformed sedimentary cover. The recorded travel-time refractions and reflections were jointly inverted by using a 2-D tomographic approach, which resulted in variations across the scarp axis in both the velocities and the reflections that are interpreted as the sedimentary cover-rock substratum topography. Seismic anisotropy observed from tomographic profiles is consistent with sediment deformation triggered by west-vergent thrust tectonics along the fault. Electrical soundings crossing two fault scarps were used to construct subsurface resistivity tomographic profiles, which reveal systematic differences between lower resistivity values in the hanging wall with respect to the footwall of the geological structure, and clearly show well-defined east-dipping resistivity boundaries. These boundaries can be interpreted in terms of structurally driven fluid content change between the hanging wall and the footwall of the San Ramón fault. The overall results are consistent with a west-vergent thrust structure dipping ~55° E in the subsurface beneath the piedmont sediments, with local complexities likely associated with variations in fault surface rupture propagation, fault splays and fault segment transfer zones.

scholarly journals Features of the geological structure, tectonic development and oil and gas potential of the Chezhen depression (Bohai bay basin)

2021 ◽  
Vol 63 (5) ◽  
pp. 8-16
Author(s):  
Sh. Qiu ◽  
N. A. Kasyanova
Keyword(s):  
Large Scale ◽  
Oil And Gas ◽  
Geological Structure ◽  
Fault System ◽  
Bohai Bay ◽  
Industrial Oil ◽  
Tectonic Development ◽  
Geophysical Information ◽  
Oil Deposits ◽  
Gas Potential

Background. In terms of oil and gas, the territory of the Chezhen depression has been studied insufficiently compared to the neighbouring same-range depressions. These depressions complicate the first-order Jiyang depression, geographically coinciding with the largest Shengli hydrocarbon field. In recent years, much geological and geophysical information about the oil geologyof the Chezhen depression has been accumulated, which allows its prospecting oil and gas potential to be assessed.Aim. To reveal regular features of the geological structure and location of oil deposits in the Chezhen depression in order to support the prospecting and exploration work within the Chezhen block of the Shengli field.Materials and methods. A comprehensive analysis of literature data and collected materials was conducted. A historical and geodynamic study of the evolution of the studied area according to literature data was carried out, along with an analysis of the most recent geological and geophysical information and exploration data based on the materials of the “Shengli AKOO Sinopek” oil company. The analysis was based on the data from 52 drilling wells and the results of seismic surveys performed in the central part of the Chezhen depression.Results. Specific features of the block geological structure of the area under study were established, which formed under the repeated influence of large-scale horizontal tectonic movements occurring at different periods of geological history. The role of the most recent fault system in the modern spatial distribution of oil deposits was determined.Conclusions. Our studies demonstrate a great prospecting potential of the Chezhen depression territory, where the discovery of new industrial oil deposits can be expected.

scholarly journals Microbial ecology and geoelectric responses across a groundwater plume

2015 ◽  
Vol 3 (4) ◽  
pp. SAB9-SAB21 ◽  
Author(s):  
Rory Doherty ◽  
Blathnaid McPolin ◽  
Bernd Kulessa ◽  
Alessandra Frau ◽  
Anna Kulakova ◽  
...  
Keyword(s):  
Microbial Ecology ◽  
Large Scale ◽  
Contaminant Plume ◽  
Electrochemical Gradient ◽  
Iron Cycling ◽  
Nitrogen Gas ◽  
Nitrite Nitrate ◽  
Redox Boundary ◽  
Self Potential

We have used geophysics, microbiology, and geochemistry to link large-scale (30+ m) geophysical self-potential (SP) responses at a groundwater contaminant plume with its chemistry and microbial ecology of groundwater and soil from in and around it. We have found that microbially mediated transformation of ammonia to nitrite, nitrate, and nitrogen gas was likely to have promoted a well-defined electrochemical gradient at the edge of the plume, which dominated the SP response. Phylogenetic analysis demonstrated that the plume fringe or anode of the geobattery was dominated by electrogens and biodegradative microorganisms including Proteobacteria alongside Geobacteraceae, Desulfobulbaceae, and Nitrosomonadaceae. The uncultivated candidate phylum OD1 dominated uncontaminated areas of the site. We defined the redox boundary at the plume edge using the calculated and observed electric SP geophysical measurements. Conductive soils and waste acted as an electronic conductor, which was dominated by abiotic iron cycling processes that sequester electrons generated at the plume fringe. We have suggested that such geoelectric phenomena can act as indicators of natural attenuation processes that control groundwater plumes. Further work is required to monitor electron transfer across the geoelectric dipole to fully define this phenomenon as a geobattery. This approach can be used as a novel way of monitoring microbial activity around the degradation of contaminated groundwater plumes or to monitor in situ bioelectric systems designed to manage groundwater plumes.

Hydrofractures and crustal-scale fluid flow

2021 ◽  
Author(s):  
Paul D. Bons ◽  
Tamara de Riese ◽  
Enrique Gomez-Rivas ◽  
Isaac Naaman ◽  
Till Sachau
Keyword(s):  
Fluid Flow ◽  
Large Scale ◽  
Low Flow ◽  
Fault System ◽  
Tectonic Activity ◽  
Field Evidence ◽  
Dehydration Reactions ◽  
Matrix Flow ◽  
Matrix Porosity ◽  
Fluid Sources

<p>Fluids can circulate in all levels of the crust, as veins, ore deposits and chemical alterations and isotopic shifts indicate. It is furthermore generally accepted that faults and fractures play a central role as preferred fluid conduits. Fluid flow is, however, not only passively reacting to the presence of faults and fractures, but actively play a role in their creation, (re-) activation and sealing by mineral precipitates. This means that the interaction between fluid flow and fracturing is a two-way process, which is further controlled by tectonic activity (stress field), fluid sources and fluxes, as well as the availability of alternative fluid conduits, such as matrix porosity. Here we explore the interaction between matrix permeability and dynamic fracturing on the spatial and temporal distribution of fluid flow for upward fluid fluxes. Envisaged fluid sources can be dehydration reactions, release of igneous fluids, or release of fluids due to decompression or heating.</p><p> </p><p>Our 2D numerical cellular automaton-type simulations span the whole range from steady matrix-flow to highly dynamical flow through hydrofractures. Hydrofractures are initiated when matrix flow is insufficient to maintain fluid pressures below the failure threshold. When required fluid fluxes are high and/or matrix porosity low, flow is dominated by hydrofractures and the system exhibits self-organised critical phenomena. The size of fractures achieves a power-law distribution, as failure events may sometimes trigger avalanche-like amalgamation of hydrofractures. By far most hydrofracture events only lead to local fluid flow pulses within the source area. Conductive fracture networks do not develop if hydrofractures seal relatively quickly, which can be expected in deeper crustal levels. Only the larger events span the whole system and actually drain fluid from the system. We present the 10 square km hydrothermal Hidden Valley Mega-Breccia on the Paralana Fault System in South Australia as a possible example of large-scale fluid expulsion events. Although field evidence suggests that the breccia formed over a period of at least 150 Myrs, actual cumulative fluid duration may rather have been in the order of days only. This example illustrates the extreme dynamics that crustal-scale fluid flow in hydrofractures can achieve.</p>

Sign in / Sign up

Export Citation Format

Share Document