scholarly journals Produção de feijão-caupi e gergelim consorciado com mamoneira no Semiárido paraibano

2017 ◽  
Vol 12 (1) ◽  
pp. 01 ◽  
Author(s):  
Guilherme de Freitas Furtado ◽  
Anielson dos Santos Souza ◽  
Rodolfo Rodrigo de Almeida Lacerda ◽  
Lúcia Helena Garófalo Chaves ◽  
José Raimundo de Sousa Júnior ◽  
...  
Keyword(s):  
Castor Bean ◽  
Yield Components ◽  
Block Design ◽  
Field Conditions ◽  
Semiarid Region ◽  
Experimental Plot ◽  
Experimental Systems ◽  
Randomized Block Design ◽  
Experimental Trials

<p>Objetivou-se avaliar os componentes de produção do feijão-caupi e gergelim, consorciado com a mamoneira no semiárido paraibano. O experimento foi desenvolvido no período de março a novembro de 2011 em condições de campo em Pombal, Paraíba. Realizou-se sob delineamento experimental em blocos ao acaso com três sistemas de cultivo em dois ensaios experimentais: feijão-caupi (cv. BRS Novaera) e gergelim (cv. BRS Seda) em monocultivo, consórcio com mamona cv. IAC 2028 e consórcio com mamona cv. BRS Nordestina, com 4 repetições, totalizando 12 parcelas experimentais em cada ensaio. O consórcio com a mamoneira reduz os componentes de produção e produção do feijão-caupi e gergelim, sendo a cv. BRS Nordestina mais competitiva. Considerando as variáveis estudadas, a melhor opção para cultivo consorciado do feijão-caupi ou gergelim na região é a cv. IAC 2028.<strong> </strong></p><p align="center"><strong><em>Production of cowpea and sesame intercropped with castor bean in semiarid region of Paraiba</em></strong><strong><em></em></strong></p><p><strong>Abstract</strong><strong>: </strong>The objective was to evaluate yield components of cowpea and sesame grown as secondary crops, intercropping with castor bean in the semiarid region of Paraiba. The experiment was carried out from March to November 2011 under field conditions in Pombal, Paraíba state. Three experimental systems were used in a randomized block design in two experimental trials: cowpea (cv. BRS Novaera) and sesame (cv. BRS Seda) in monoculture, intercropping with castor bean cv. IAC 2028 and intercropping with castor bean cv. BRS Nordestina, with 4 replicates, totaling 12 experimental plot in each trial. The intercrop with castor bean reduces yield components and yield of cowpea and sesame, with an cv. BRS Nordestina more competitive. Considering the variables studied, the best option for intercropping cowpea or sesame in the region is the cv. IAC 2028.</p>

scholarly journals POTENTIAL AGROFORESTRY SYSTEMS FOR SEMIARID REGIONS

FLORESTA ◽  
2021 ◽  
Vol 51 (2) ◽  
pp. 363
Author(s):  
Erick Martins Nieri ◽  
Rodolfo Soares de Almeida ◽  
Renato Luiz Grisi Macedo ◽  
Wagner Massote Magalhães ◽  
Nelson Venturin ◽  
...  
Keyword(s):  
Castor Bean ◽  
Block Design ◽  
Agroforestry Systems ◽  
Semiarid Region ◽  
Wood Production ◽  
Semiarid Regions ◽  
M 10 ◽  
Randomized Block Design

The objective of this work was to evaluate the potential of agroforestry systems in the semiarid, and to evaluate the productivity of eucalyptus in three planting spacing, in single cultivation in agroforestry systems. The comparison of the systems was in a randomized block design with four systems (monoculture; peanut systems; castor bean; cassava) and three eucalyptus spacing (10 m x 2 m, 10 m x 3 m and 10 m x 4 m). Monocultures and other characteristics were compared by randomized block design. Peanut productivity was evaluated at three and a half months, castor productivity at five and eight months and cassava productivity at 21 months. Eucalyptus productivity was measured at 13 and 21 months of age. The results showed that the wood production was greater in the 10 m x 2 m spacing and in the system with castor and single cultivation. The castor yield was higher in the system, in the 10 m x 3 m spacing, while the cassava productivity was higher in monoculture. The area equivalence index of the systems was higher than that of monocultures. Therefore, eucalyptus agroforestry systems intercropped with castor and cassava are suitable for the semiarid region. The 10 m x 2 m spacing provided a larger volume of wood (m³ ha-1). Castor yield was higher in the 10 m x 3 m spacing. For cassava, the highest yield was obtained in monoculture and in the system with 10 m x 3 m or 10 m x 4 m spacing.

Combining ability and heterosis studies across environments in linseed (Linum usitatissimum L.)

2011 ◽  
Vol 59 (1) ◽  
pp. 87-102 ◽  
Author(s):  
S. Sood ◽  
N. Kalia ◽  
S. Bhateria
Keyword(s):  
Seed Yield ◽  
Linum Usitatissimum ◽  
Combining Ability ◽  
Yield Components ◽  
Block Design ◽  
Linum Usitatissimum L ◽  
Randomized Block Design ◽  
Component Traits ◽  
Parental Lines ◽  
Fibre Yield

Combining ability and heterosis were calculated for fourteen lines of linseed in a line × tester mating design using twelve lines and two diverse testers in two different environments. The hybrids and parental lines were raised in a completely randomized block design with three replications to investigate seed and fibre yield and their component traits. Genetic variation was significant for most of the traits over environments. Combining ability studies revealed that the lines KL-221 and LCK-9826 were good general combiners for seed yield and most of its components, whereas LMH-62 and LC-2323 were good general combiners for yield components only. Moreover, KL-221 was also a good general combiner for fibre yield. Similarly, B-509 and Ariane were good general combiners for fibre yield and most of its components. Among the specific cross combinations, B-509 × Flak-1 was outstanding for seed yield per plant and B-509 × KL-187 and LC-2323 × LCK-9826 for fibre yield per plant, with high SCA effects. In general, the hybrids excelled their respective parents and the standard checks for most of the characters studied. Based on the comparison of mean performance, SCA effects and the extent of heterosis, the hybrids LC-2323 × LCK-9826 and B-509 × KL-221 appeared to be the most promising for both seed and fibre yield. Other promising combinations were LC-2323 × KL-210 and B-509 × Ariane for seed and fibre yield, respectively. The superiority of LC-2323, LCK-9826, KL-221, B-509 and Ariane as good general combiners was further confirmed by the involvement of these parents in the desirable cross combinations.

Effectiveness of nitrogen and bio-fertilizer choice for improving growth and yield of hybrid rice (Oryza sativa L.) during dry season

2020 ◽  
Vol 57 (4) ◽  
pp. 302-309
Author(s):  
Sukanta Pal ◽  
Megha Sana ◽  
Hirak Banerjee ◽  
Lhingneikim Lhungdim
Keyword(s):  
Yield Components ◽  
Hybrid Rice ◽  
Growth Parameters ◽  
Oryza Sativa L ◽  
Block Design ◽  
Growth And Yield ◽  
Combined Application ◽  
Randomized Block Design ◽  
N Dose ◽  
Dry Seasons

Effect of nitrogen and bio-fertilizer on growth and productivity of hybrid rice (cv. PHB 71) was assessed during dry seasons of 2017 and 2018 at Research Farm of BCKV under new alluvial zone of West Bengal. The experiment was laid out in factorial randomized block design with 12 treatment combinations having 4 levels of N and 3 types of bio-fertilizer replicated thrice. Application at 180 kg N/ha produced tallest plants at 90 DAT with maximum LAI (60 DAT), DMA (90 DAT), tillers/hill (90 DAT) and CGR (30-60 & 60-90 DAT). The same N rate resulted in highest panicles/m2, panicle length, panicle weight, filled grains/panicle and 1000-grain weight. A decrease in N dose from 180 to 150 kg/ha caused reduction in all those yield components; however, the variation was non-significant except for number of panicles/m2. Maximum grain yield, straw yield and harvest index was also achieved with 180 kg N/ha accounting 120.1, 34.9 and 32.8% more than the values obtained with zero-N; however, it was statistically at par with the yields and HI obtained with 150 kg N/ha. The Azospirillum application increased all the growth parameters, yield components and yield of hybrid rice over other tested bio-fertilizers (Azospirillum > PSB > K mobilizer), accounting 5.9 and 8.8% more than the yields obtained with PSB and K mobilizer. The interaction of N and bio-fertilizer exerted significant effect on growth attributes but failed to record any significant variations in yield components and yield of hybrid rice. The maximum economic benefit was achieved with combined application of 180 kg N/ha and Azospirillum.

scholarly journals Nitrogen topdressing and application ways of fluazifop-p-butyl + fomesafen in weed control and agronomic performance of common bean

2015 ◽  
Vol 87 (4) ◽  
pp. 2301-2307 ◽  
Author(s):  
MATHEUS G. SILVA ◽  
ORIVALDO ARF ◽  
PAULO E. TEODORO
Keyword(s):  
Common Bean ◽  
Weed Control ◽  
Yield Components ◽  
Dry Matter ◽  
Block Design ◽  
Agronomic Performance ◽  
Randomized Block Design ◽  
Bean Yield ◽  
Leaf N Content ◽  
Leaf N

ABSTRACT The objective of this study was to investigate the effect of interaction between nitrogen topdressing and different application ways (active ingredients) a.i. fluazifop-p-butyl + fomesafen in weed control and agronomic performance of common bean. The experiment was conducted during winter 2003 in Selvíria/MS. The experimental design used was a randomized block design with four replications in a factorial scheme 2x7. The first factor was composed by the absence or presence of nitrogen topdressing, while the second factor consisted of different application ways of fluazifop-p-butyl + fomesafen. The following variables were measured: leaf N content, dry matter of plants, yield components (number of pods plant-1, number of grains plant-1, the average number of grains pod-1 and mass of 100 grains), grain yield, phytotoxicity and weed control percentage. The nitrogen topdressing with 75 kg ha-1provided higher dry matter of plants, higher weed control and higher common bean yield of irrigated winter. In the absence of nitrogen topdressing in the application of urea before or together to fluazifop-p-butyl + fomesafen increased their effectiveness in controlling weeds without interference in the agronomic performance of common bean.

scholarly journals Yield of castor bean fertilized with sewage sludge and potassium and magnesium sulphate

2015 ◽  
Vol 19 (8) ◽  
pp. 773-779 ◽  
Author(s):  
Thâmara F. M. Cavalcanti ◽  
Geraldo R. Zuba ◽  
Regynaldo A. Sampaio ◽  
João P. Carneiro ◽  
Ely S. A. de Oliveira ◽  
...  
Keyword(s):  
Organic Matter ◽  
Sewage Sludge ◽  
Castor Bean ◽  
Block Design ◽  
Additional Treatment ◽  
Iron Copper ◽  
Maximum Value ◽  
Randomized Block Design ◽  
N Requirement ◽  
Bean Leaves

<title>ABSTRACT</title><p>The aim of this study was to evaluate the yield and nutrition of castor bean in response to fertilization with sewage sludge and potassium (K) and magnesium (Mg) sulphate. The experiment was carried out from January to July 2011. The treatments, in a randomized block design with three replicates, in a Nitosol, corresponded to a factorial scheme (2 x 4 +1): two doses of K and Mg sulphate combined with four doses of sewage sludge (0, 2.60, 5.20 and 10.40 t ha<sup>-1</sup>, dry basis), applied based on its nitrogen (N) content and the N requirement for the crop and an additional treatment with NPK. The castor bean grain yield fertilized with sewage sludge did not differ from conventional fertilization, with the maximum value achieved at a dose of 7.5 t ha<sup>-1</sup> of sewage sludge. The fertilization with sewage sludge increased zinc and copper levels in the soil to values close to or higher than those in conventional fertilization, without any influence on the concentrations in the leaf. Fertilization with K and Mg sulphate increased the levels of these cations in the soil without affecting the concentrations in the leaves. The fertilization with sewage sludge increased the contents of organic matter, sulfur, zinc, iron, copper and boron in the soil, and manganese and boron in castor bean leaves.</p>

scholarly journals Penampilan Varietas Jagung Unggul Baru Bermutu Protein Tinggi di Jawa dan Bali

2017 ◽  
Vol 10 (2) ◽  
pp. 49 ◽  
Author(s):  
Muhammad Azrai
Keyword(s):  
Amino Acids ◽  
Yield Components ◽  
Future Prospect ◽  
Block Design ◽  
Quality Protein Maize ◽  
Row Spacing ◽  
Randomized Block Design ◽  
Puccinia Polysora ◽  
Ear Height ◽  
Biomass Plant

<p><strong>Abstract</strong></p><p>Study on the performance of two quality protein maize (QPM) varieties (Srikandi Putih-1 and Srikandi Kuning-1) plus two Indonesian open pollinated varieties (Bayu and Lamuru) was conducted at seven environments in Java and Bali. The experiments were arranged in a randomized block design with three replications. Each variety was grown in a four-row plot with 5 m length, 75cm apart and 25 cm within row spacing and one plant per hill. Observations were made on yield, biomass, plant height, ear height, flowering dates, yield components, plant and ear aspect, husk cover, diseases incidence of Puccinia polysora and Helminthossporium maydis, protein contains, lysine, and tryptophan-amino acids contains. In general, Srikandi Putih-1 and Srikandi Kuning-1 varieties had a good adaptations under all environments. They contained nearly twice the lysine and tryptophan-amino acids compared to Bayu and Lamuru varieties. Therefore, they have future prospect for the development of protein synthesis in humans and monogastric animals.</p><p><strong>Abstrak</strong></p><p>Penelitian penampilan varietas jagung unggul baru bermutu protein tinggi (Srikandi Putih-1 dan Srikandi Kuning-1) dan dua varietas unggul nasional (Bayu dan Lamuru) telah dilaksanakan pada tujuh lokasi di Jawa dan Bali pada tahun 2003 sampai 2004. Penelitian ditata dalam percobaan acak kelompok dengan tiga ulangan. Setiap varietas ditanam pada petakan empat baris, panjang 5 m, jarak antar baris 75 cm, jarak dalam barisan 25 cm, dan ditumbuhkan satu tanaman per rumpun. Pengamatan dilakukan terhadap hasil biji, biomas segar, tinggi tanaman, panjang tongkol, umur berbunga, komponen hasil, skor penampilan tanaman, penutupan kelobot, penyakit karat dan hawar daun, serta kandungan protein kasar, asam amino lisin, dan triptofan. Secara umum varietas Srikandi Putih-1 dan Srikandi Kuning-1 dapat beradaptasi baik pada semua lingkungan. Selain itu, kedua varietas tersebut mempunyai kandungan lisin dan triptofan hampir dua kali lipat dibandingkan dengan varietas Bayu dan Lamuru. Oleh karena itu, kedua varietas tersebut mempunyai prospek untuk dikembangkan sebagai sintesis protein pada ternak monogastrik dan manusia.</p>

scholarly journals Effect of spatial arrangement on the production components and yield of sunflower

Revista CERES ◽  
2016 ◽  
Vol 63 (2) ◽  
pp. 214-222
Author(s):  
Francisco Thiago Coelho Bezerra ◽  
Alek Sandro Dutra ◽  
João Bosco Pitombeira
Keyword(s):  
Yield Components ◽  
Harvest Index ◽  
Polynomial Regression ◽  
Block Design ◽  
Spatial Arrangement ◽  
Biodiesel Production ◽  
Plant Science ◽  
Oilseed Crop ◽  
Randomized Block Design ◽  
Crop Cycle

ABSTRACT The sunflower plant is an oilseed crop that has aroused a great interest in the Brazilian and international scenery especillay because of the possibility of using its oil for biodiesel production. The objective of this study was to evaluate productivity and yield components of Embrapa 122 sunflower according to the spatial arrangement. Treatments were arranged in 4 x 4 factorial arrangement, which are the four spacings between rows (0.30; 0.50; 0.70 and 0.90 m) and four sowing densities (30,000; 45,000; 60,000 and 75,000 plants ha-1). The experiment was carried out in a complete randomized block design with four replications. The experiments were conducted in the experimental area of the Plant Science Department in Fortaleza, State of Ceará-Brazil and on the Curu Vale Experimental Farm in Pentecoste, State of Ceará-Brazil. Productivity and the following production components were analyzed in the end of the crop cycle: harvested capitula, capitulum diameter, capitulum mass, achene mass per capitulum, mass of 100 achenes, achenes per capitulum, harvest index and oil content in the achenes. The experiments were analyzed jointly in relation to the cropping area and the data submitted to analysis of variance and quantitative factors tested by polynomial regression. The variables, spacing, density and cropping area did not interact with these variables and the spatial arrangement of the plants affected only the components. The cropping area influences the productive behavior of sunflower Embrapa 122. The spatial arrangement of the plants of sunflower of variety Embrapa 122 influences yield components but does not affect productivity.

scholarly journals ‘Pele de sapo’ melon grown under different irrigation depths and bioestimulant rates in the Semiarid region of Brazil

2020 ◽  
Vol 11 ◽  
pp. e3303
Author(s):  
Daíse Souza Reis Lima ◽  
Welson Lima Simões ◽  
José Aliçandro Bezerra da Silva ◽  
Magno do Nascimento Amorim ◽  
Alessandra Monteiro Salviano ◽  
...  
Keyword(s):  
Production Efficiency ◽  
Irrigation System ◽  
Block Design ◽  
Cold Season ◽  
Semiarid Region ◽  
Randomized Block Design ◽  
Relative Water ◽  
Chlorophyll A And B ◽  
Hot Season ◽  
Amino Acid Contents

The objective of this work was to evaluate physiological and biochemical responses of Pele de sapo melon to different irrigation depths (ID) and bioestimulant rates (BTM) to improve its production efficiency. The experiment was conducted in an experimental field in Juazeiro, BA, Brazil. A randomized block design in split split-plot arrangement was used, with four ID (60, 80, 100, and 120% of crop evapotranspiration – ETc) in the plots; five (BTM) (Stimulate® at 0, 0.6, 1.2, 2.4, and 4.8 L ha-1 applied via irrigation system during the flowering stage and after the fruiting stage) in the subplots; and two crop seasons (hot season, 23 to 39 °C; and cold season, 15 to 30 °C) in the sub-subplots. The plants were under daily drip irrigation and spacing of 2.0 × 0.3 m. The variables evaluated were: gas exchange, water use efficiency, chlorophyll a and b, relative water, sugar, and amino acid contents, and fruit yield. The results showed that the ID of 60% ETc resulted in water deficit, denoted by increases in solute concentrations, whereas the ID of 80% and 100% resulted in plants with good performance for biochemical, physiological, and production parameters in both crop seasons. The hot season, ID of 120% ETc, and BTM of 2.4 L ha-1 are recommended for Pele de sapo melon crops, since they result in the best physiological responses and fruit yields.

scholarly journals Planting Density and Soybean (Glycine max L.) Cultivars Effects on Yield Components in the Amazon

2020 ◽  
Vol 8 (3) ◽  
pp. 63
Author(s):  
Priscila Pereira Sacramento ◽  
Letícia Cunha da Hungria ◽  
Jamil Chaar El-Husny ◽  
Luis De Souza Freitas
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Yield Components ◽  
Block Design ◽  
Planting Density ◽  
Maximum Height ◽  
Soybean Cultivars ◽  
Linear Behavior ◽  
Randomized Block Design ◽  
Glycine Max L

The aim of this study was to evaluate the influence of planting density and cultivar of soybean on yield components in the southeast Amazon. The experiment was carried out in an Oxisol, with a randomized block design in a 2 x 4 factorial scheme. The treatments were two soybean cultivars (BRS 9090 RR and BRS 8990 RR) and four planting densities (13, 15, 18 and 20 plants m-1), with three replications. First pod insertion height (IFP), plant height (H), number of pods per plant (NPP), grain yield (Y) and weight of 100 grains (W100) were evaluated. The insertion height of the first pod showed a tendency of increase with the increment of plants per linear meter for cultivar BRS 8990 RR, different of the behavior observed for the cultivar BRS 9090 RR, which only showed difference when the density of 300.000 plants ha-1 was tested. For plant height, among soybean cultivars, there was only difference in D400, with BRS 8990 RR showing a maximum height of 83.3 cm, 21% higher than BRS 9090 RR. When evaluated under D350, BRS 8990 RR showed an increase of 13% in the number of pods compared to BRS 9090 RR. Both cultivars showed linear behavior for the grain yield, increasing according the plant population, with the highest grain yield obtained under the density of 400.000 plants ha-1 (4527.3 kg ha-1). The weight of 100 grains was not influenced by any variation factor.

scholarly journals Aluminum tolerance in castor bean lines1

2018 ◽  
Vol 48 (3) ◽  
pp. 299-305
Author(s):  
Lucas Barbosa de Freitas ◽  
Dirceu Maximino Fernandes ◽  
Suelen Cristina Mendonça Maia ◽  
Laerte Gustavo Pivetta ◽  
Maurício Dutra Zanotto
Keyword(s):  
Castor Bean ◽  
Block Design ◽  
Aluminum Tolerance ◽  
Acid Soils ◽  
Al Tolerance ◽  
Tropical Regions ◽  
Randomized Block Design ◽  
Bean Plants ◽  
Management Techniques ◽  
Adequate Management

ABSTRACT Castor bean plants are susceptible to aluminum (Al) in the soil, requiring adequate management techniques for their cultivation in acid soils containing high Al levels, as it occurs in tropical regions. This study aimed to assess the Al tolerance of castor bean lines. A randomized block design, in a 2 x 9 factorial scheme, with four replicates, was used. The treatments consisted of presence and absence of Al, as well as nine castor bean lines (CRZ H06, CRZ H11, CRZ H12, CRZ H15, CRZ H17, CRZ H18, CRZ H19, CRZ H22 and FCA). Based on a distribution into quartiles, the lines were divided into two groups. The Al-tolerant group contained the CRZ H06, H11 and H17 lines, while the group susceptible to Al was composed of CRZ H12, H15, H18, H19, H22 and FCA. The FCA and CRZ H17 lines showed the highest growth, when cultivated without Al.

Sign in / Sign up

Export Citation Format

Share Document