scholarly journals Optimal Composition of Blended Waste Ceramic Aggregate

◽  
2016 ◽  
Author(s):  
Jacek Katzer ◽  
◽  
Elżbieta Kuźmińska ◽  
Keyword(s):  
Optimal Composition

Transiting into Singaporean identity: Immigration and naturalisation policy

2015 ◽  
Vol 13 (1) ◽  
pp. 33-48 ◽  
Author(s):  
Mathews Mathew ◽  
Debbie Soon
Keyword(s):  
Manpower Planning ◽  
The State ◽  
Comparative Perspective ◽  
Policy Discourse ◽  
Optimal Composition ◽  
Skilled Labour ◽  
Planning Policy ◽  
The Government ◽  
The Ideal

Debates in Singapore about immigration and naturalisation policy have escalated substantially since 2008 when the government allowed an unprecedentedly large number of immigrants into the country. This essay will discuss immigration and naturalisation policy in Singapore and the tensions that have been evoked, and how these policies are a key tool in regulating the optimal composition and size of the population for the state’s imperatives. It will demonstrate that although the state has, as part of its broader economic and manpower planning policy to import labour for economic objectives, it seeks to retain only skilled labour with an exclusive form of citizenship.  Even as the Singapore state has made its form of citizenship even more exclusive by reducing the benefits that non-citizens receive, its programmes for naturalising those who make the cut to become citizens which include the recently created Singapore Citizenship Journey (SCJ) is by no means burdensome from a comparative perspective. This paper examines policy discourse and the key symbols and narratives provided at naturalisation events and demonstrates how these are used to evoke the sense of the ideal citizen among new Singaporeans. 

THE CHOICE OF THE OPTIMAL COMPOSITION OF HARD CAPSULES WITH TRITICAINE-ALPHA

2019 ◽  
Vol 21 (12) ◽  
pp. 66-71
Author(s):  
Тарасов В.В. ◽  
◽  
Краснюк И.И. ◽  
Козлова Ж. М. ◽  
◽  
...  
Keyword(s):  
Optimal Composition

Hygrothermal performance of various Typha–clay composite

2018 ◽  
Vol 42 (3) ◽  
pp. 316-335 ◽  
Author(s):  
Ibrahim Niang ◽  
Chadi Maalouf ◽  
Tala Moussa ◽  
Christophe Bliard ◽  
Etienne Samin ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Optimal Composition ◽  
Volume Weight ◽  
Hygrothermal Behavior ◽  
Three Samples ◽  
Hygrothermal Performance ◽  
Absolute Density ◽  
Typha Australis ◽  
Hygric Properties ◽  
Made In

This article deals with the influence of both morphology and amount of Typha on hygrothermal behavior of a Typha–clay composite for building application. An agromaterial containing the fiber mix of Typha Australis and clay was made in three samples: three fiber mixtures were prepared with different amounts Typha and cut type (transversal or longitudinal). The physical properties of these materials were studied in terms of porosity, apparent and absolute density, thermal conductivity, and hygric properties. Results show a real impact of the Typha fraction type and its volume content on hygrothermal properties of the studied material due to the porosity. The transversal fraction of Typha (80% in volume weight) seems to be the optimal composition for a better hygrothermal behavior.

Aspects of Applying Hard Chromium Coatings on the Inner Surfaces of Components for Hydraulic Drives with Hydrostatic Guideways

2021 ◽  
Vol 316 ◽  
pp. 827-832
Author(s):  
D. V. Ardashev ◽  
L.V. Shipulin ◽  
A.S. Degtyareva-Kashutina
Keyword(s):  
Hydraulic Cylinder ◽  
Chromium Coating ◽  
Optimal Composition ◽  
Chromic Anhydride ◽  
Corrosion Resistant ◽  
Distinctive Features ◽  
Wear Resistant Coatings ◽  
Hard Chromium ◽  
Chromium Plating ◽  
Plating Method

We considered the processes of chromium plating the inner surfaces of the components of cylinders with hydrostatic guideways. We demonstrated the various aspects of the chromium plating process – the limitations placed on the machinery depending on the dimensions of the parts to be plated and the unevenness of the deposition rate of chromium along the length of the part. We developed a diagram of an installation for the application of a hard chromium coating on inner surfaces, which includes a cathode, an anode, a tank, and a pipeline. The distinctive features of the installation are the method of supplying the electrolyte at an angle to the horizontal, which allows us to supply the electrolyte through a turbulent flow swirling along a helical path, and the use of a chromium-plated installation casing. We studied various modes for applying a hard chromium coating on the inner surfaces of a hydraulic cylinder. As a result, we determined the optimal composition of the chromium electrolyte – the ratio of chromic anhydride and sulfuric acid – which is 10:1, respectively, and experimentally selected deposition modes. Chromium coatings obtained through the use of the concentrated electrolyte, which we developed, and the chromium plating method have 5...20% greater hardness and a 10...30-times reduction in porosity with the formation of a shiny, lumpy sludge, which corresponds to corrosion-resistant and wear-resistant coatings needed to manufacture hydraulic drives with highly efficient hydrostatic guideways.

Sintesis dan Karakterisasi Na-CMC dari A-Selulosa Serabut Kelapa Sawit

2021 ◽  
Vol 1 (9) ◽  
pp. 375-381
Author(s):  
Indriani Indriani ◽  
Abu Hasan ◽  
Anerasari Meydinariasty
Keyword(s):  
Palm Oil ◽  
Trichloroacetic Acid ◽  
Reaction Medium ◽  
Synthesis Process ◽  
Optimal Composition ◽  
Palm Fiber ◽  
Oil Processing ◽  
Reaction Media ◽  
By Products

Na-CMC adalah eter polimer selulosa linier yang digunakan sebagai bahan pengental, pengemulsi dan penstabil. Salah satu bahan dasar pembuatan Na-CMC yaitu serabut kelapa sawit. Serabut kelapa sawit merupakan salah satu hasil samping terbesar yang dihasilkan dalam proses pengolahan minyak kelapa sawit dan dapat dapat dijadikan sebagai sumber selulosa karena mengandung selulosa hingga 59,60%. Tujuan dari penelitian ini untuk mendaptakan komposisi optimal campuran media reaksi isopropanol-etanol dan konsentrasi asam trikloroasetat serta konsentrasi NaOH dengan memvariasikan komposisi media reaksi isopropanol-etanol menjadi 20:80; 40:60; 50:50; 60:40 dan 80:20, sedangkan untuk konsentrasi asam trikloroasetat yaitu 15%, 20% san 25% dan untuk konsentrasi NaOH adlah 15% dan 20%. Didapat bahwa  komposisi optimal media reaksi pada proses sintesis Na-CMC terdapat pada campuran isopropanol-etanol 80:20 dengan konsentrasi asam trikloroasetat 25% dan konsentrasi NaOH 20% menghasilkan nilai DS yang tertinggi yaitu sebesar 0,8124 dengan kemurnian dan pH berturut-turut sebesar 99,68% dan 7,9.   Na-CMC is a linear cellulose polymer ether used as a thickener, emulsifier and stabilizer. One of the basic ingredients for making Na-CMC is palm fiber. Palm fiber is one of the largest by-products produced in the palm oil processing process and can be used as a source of cellulose because it contains up to 59.60% cellulose. The purpose of this study was to obtain the optimal composition of the isopropanol-ethanol reaction media mixture and the concentration of trichloroacetic acid and NaOH concentration by varying the composition of the isopropanol-ethanol reaction medium to 20:80; 40:60; 50:50; 60:40 and 80:20, while the concentrations of trichloroacetic acid were 15%, 20% and 25% and the concentrations of NaOH were 15% and 20%, respectively. It was found that the optimal composition of the reaction medium in the Na-CMC synthesis process was found in a mixture of isopropanol-ethanol 80:20 with a concentration of 25% trichloroacetic acid and 20% NaOH concentration resulting in the highest DS value of 0.8124 with purity and pH respectively. 99.68% and 7.9.

Composition and Properties of TiO2 Sol to Produce a Photocatalytic Composite Material

2020 ◽  
Vol 854 ◽  
pp. 45-50
Author(s):  
Ekaterina N. Gubareva ◽  
Valeria V. Strokova ◽  
Yulia N. Ogurtsova ◽  
Pavel S. Baskakov ◽  
Lok Pratap Singh
Keyword(s):  
Composite Material ◽  
Titanium Dioxide ◽  
Ethyl Alcohol ◽  
Titanium Dioxide Nanoparticles ◽  
Sol Gel ◽  
Component Composition ◽  
Optimal Composition ◽  
Optimal Ratio ◽  
Nanosized Titanium Dioxide ◽  
Sol Gel Synthesis

The paper presents the process of sol-gel synthesis of titanium dioxide nanoparticles, the peculiarities of the influence of component composition (titanium precursor content, solvent and stabilizer − surfactant) on the properties of sol and powder obtained on its basis. As a result of the study, the nature of the influence of the type and content of the surfactant in the solution of tetrabutoxytitanium in ethanol on the size of the synthesized particles of titanium dioxide was revealed. The optimal composition of the reaction mixture of TiO–R sol was obtained and the optimal ratio of tetrabutoxytitanium and ethyl alcohol was revealed using which a material with a high content of nanosized titanium dioxide was obtained.

Sign in / Sign up

Export Citation Format

Share Document