Application of precision chronometric technologies for monitoring deviations in the internal combustion engine operation

2021 ◽  
Author(s):  
E.T. Plaksina ◽  
A.B. Syritsky ◽  
A.S. Komshin
Keyword(s):  
Internal Combustion Engine ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Internal Combustion ◽  
The Arctic ◽  
Diagnostic Systems ◽  
Time Intervals ◽  
Angle Sensor ◽  
Engine Operation ◽  
Working Cycle

The article considers the main methods of internal combustion engine diagnostics. A method based on measuring the time intervals between the phases of the working cycle of the mechanism is described. An algorithm for measuring the time intervals from the formulation of the problem to the proof of the efficiency of this method on an internal combustion engine has been determined. The installation of the angle sensor on the crankshaft of the experimental bench engine VAZ 21126 is shown. The basis for the construction of a mathematical model of the crankshaft is presented and the main factors influencing its movement are identified. A criterion has been established according to which the misfire is determined most accurately. The results obtained can be used for developing diagnostic systems for internal combustion engines, as well as engines operating in extreme conditions, for example, beyond the Arctic Circle, on ships, etc.

Research of influence of thermal loadings on reliability of gas-diesel engines of transport and technological machines

2019 ◽  
Vol 2 (3) ◽  
pp. 121-128
Author(s):  
N. S. Sevryugina ◽  
A. S. Apatenko
Keyword(s):  
Internal Combustion Engine ◽  
Diesel Engines ◽  
Thermal Load ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Engine Oil ◽  
Actual Condition ◽  
Engine Operation ◽  
Software Product

Introduction: the factors determining the development trends of the machine-building industry on the example of modernization of the internal combustion engine are considered. The evaluation of the effectiveness of cooperation between manufacturers and the scientific potential of leading scientists in the development of designs of gas-diesel engines. The requirement of time of increase of ecology of internal combustion engines is proved, the reasons braking mass introduction of gas-diesel engines for transport and technological cars are revealed. The parameter of influence on the thermal load of the piston group in gaseous fuel is allocated. The estimation of constructive perfection of development of system of cooling of the piston of the engine is given. The effects of increased temperature on individual parts of the piston in the form of scrapes, chips, causing failure of the internal combustion engine as a whole are shown. The influence of engine oil quality on the engine operation is revealed. It is proposed to Supplement the design of the internal combustion engine with an oil level control device, developed an algorite and a software product for calculating the residual life of the engine oil on key parameters, with the establishment of the term of their replacement.Methods: the study is based on the analysis of the works of leading domestic and foreign scientists in the field of improving the design of power equipment. The theoretical and methodological basis of the study was the system approach, methods of mathematical analysis, reliability theory, analytical and statistical processing of results.Results and discussion: the theoretical justification for the increased thermal load of piston in a gas-diesel engine, justifies the addition of the construction device control engine oil level and consideration of the resource and replacement intervals for the parameters of the actual physical and chemical condition, using the database presented in the software product.Conclusion: operation of gas-diesel engines requires from the operator more strict control over the temperature regime of the engine, the condition of the engine oil and the efficiency of the engine oil, the proposed solutions will allow to assess the quality of the engine oil in real time and to carry out its replacement according to the actual condition, which will ensure.

Effect of Engine Operating Parameters on Combustion and Emission Characteristics

1992 ◽  
Author(s):  
Jiang Lu ◽  
Ashwani K. Gupta ◽  
Eugene L. Keating
Keyword(s):  
Internal Combustion Engine ◽  
Combustion Chamber ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Combustion Process ◽  
Pressure Rise ◽  
Internal Combustion ◽  
Operating Parameters ◽  
Emission Characteristics ◽  
Pollutants Emission

Abstract Numerical simulation of flow, combustion, heat release rate and pollutants emission characteristics have been obtained using a single cylinder internal combustion engine operating with propane as the fuel. The data are compared with experimental results and show excellent agreement for peak pressure and the rate of pressure rise as a function of crank angle. The results obtained for NO and CO are also found to be in good agreement and are similar to those reported in the literature for the chosen combustion chamber geometry. The results have shown that both the combustion chamber geometry and engine operating parameters affects the flame growth within the combustion chamber which subsequently affects the pollutants emission levels. The code employed the time marching procedure and solves the governing partial differential equations of multi-component chemically reacting fluid flow by finite difference method. The numerical results provide a cost effective means of developing advanced internal combustion engine chamber geometry design that provides high efficiency and low pollution levels. It is expected that increased computational tools will be used in the future for enhancing our understanding of the detailed combustion process in internal combustion engines and all other energy conversion systems. Such detailed information is critical for the development of advanced methods for energy conservation and environmental pollution control.

scholarly journals Individual drive of internal combustion engine lubrication system based on switched reluctance motor

2020 ◽  
Vol 6 (2) ◽  
pp. 146-151
Author(s):  
Ihor Holovach ◽  
◽  
Lidiia Kasha ◽  
Ivan Hudzii
Keyword(s):  
Internal Combustion Engine ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Switched Reluctance Motor ◽  
Internal Combustion ◽  
Hydrodynamic Resistance ◽  
Lubrication System ◽  
Resistance Characteristic ◽  
Switched Reluctance ◽  
Reluctance Motor

The article analyses the modern lubrication systems for internal combustion engines. Systems with mechanical drive components that contain mechanical and electronic components have been found to have a number of disadvantages. In particular, when the internal combustion engine is started cold, when the viscosity of the oil is high, the hydrodynamic resistance characteristic rises sharply, which leads to high pressure at low speeds and the drive requires low pump speeds. Again, the increase in oil temperature causes a decrease in viscosity, the hydrodynamic resistance characteristic becomes flatter. This, in turn, reduces the pressure in the lubrication system and requires an increase in pump speed in order to keep the pressure constant. Based on the analysis, the requirements for lubrication systems are formulated and a separate lubrication system with forced oil supply is proposed in this paper. For the drive of pump lubrication system of the internal combustion engine, a switched reluctance motor is proposed and calculated. Such motor by its qualities is one of the most useful in this type of systems.

scholarly journals Assessment of thermodynamic cycle of internal combustion engine in terms of rightsizing

2019 ◽  
Vol 178 (3) ◽  
pp. 182-186
Author(s):  
Zbigniew SROKA ◽  
Maciej DWORACZYŃSKI
Keyword(s):  
Internal Combustion Engine ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Combustion Process ◽  
Thermodynamic Cycle ◽  
Internal Combustion ◽  
Research Problem ◽  
Combustion Engines ◽  
Operating Characteristics ◽  
Swept Volume

The modification of the downsizing trend of internal combustion engines towards rightsizing is a new challenge for constructors. The change in the displacement volume of internal combustion engines accompanying the rightsizing idea may in fact mean a reduction or increase of the defining swept volume change factors and thus may affect the change in the operating characteristics as a result of changes in combustion process parameters - a research problem described in this publication. Incidents of changes in the displacement volume were considered along with the change of the compression space and at the change of the geometric degree of compression. The new form of the mathematical dependence describing the efficiency of the thermodynamic cycle makes it possible to evaluate the opera-tion indicators of the internal combustion engine along with the implementation of the rightsizing idea. The work demonstrated the in-variance of cycle efficiency with different forms of rightsizing.

FEATURES OF MEASURING THE CAMSHAFT OF INTERNAL COMBUSTION ENGINES

2021 ◽  
Vol 4 (30) ◽  
pp. 99-105
Author(s):  
A. V. Summanen ◽  
◽  
S. V. Ugolkov ◽  
Keyword(s):  
Internal Combustion Engine ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Technical Condition ◽  
Combustion Engines

This article discusses the issues of assessing the technical condition of the camshaft, internal combustion engine. The necessary parameters for assessing the technical condition of the engine camshaft have been determined. How and how to measure and calculate this or that parameter is presented in detail. Methods for calculating the parameters are presented. A scheme and method for measuring neck wear, determining the height of the cam, determining the beating of the central journal of the camshaft are proposed. The main defects of the camshafts are presented. The issues of the influence of these parameters on the operability of the camshaft and the internal combustion engine as a whole are considered.

Possibility of using gas lubricant in the cylinders of internal combustion engines of transport vehicles

2021 ◽  
pp. 13-20
Author(s):  
Keyword(s):  
Internal Combustion Engine ◽  
Bearing Capacity ◽  
Power Plants ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Combustion Engines ◽  
Engine Piston ◽  
Suspension Stiffness ◽  
Gas Layer

The prospects of using the gas-static suspension of the internal combustion engine piston in transport vehicles and power plants are considered. The diagram of the piston and the method for calculating the stiffness and bearing capacity of the gas layer surrounding the piston are presented, as well as the results of experiments that showed the relevance of this method. The possibility of gas and static centering of the engine piston is confirmed. Keywords: internal combustion engine, piston, gasstatic suspension, stiffness, bearing capacity, gas medium. [email protected]

On-board online evaluation of the charge density in internal combustion engines through electrical discharge characteristics

2019 ◽  
Vol 22 (1) ◽  
pp. 341-348
Author(s):  
Nir Druker ◽  
Gideon Goldwine ◽  
Eran Sher
Keyword(s):  
Charge Density ◽  
Internal Combustion Engines ◽  
Evaluation Method ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Ambient Conditions ◽  
Engine Operation ◽  
Cycle Basis ◽  
Spark Timing ◽  
Propulsion Unit

We propose here a new method to evaluate the mixture charge density inside the combustion chamber of an internal combustion engine. This is an important parameter that is needed to optimize the spark timing and the amount of fuel that is introduced to the cylinder at each cycle, thus optimizing the engine operation for higher power, lower brake-specific fuel consumption, or lower pollutants’ emission at any altitude/ambient conditions. The evaluation of the charge density is performed at each cycle (on a cycle-to-cycle basis) by using the voltage–current characteristics of the spark plug gap. This real-time evaluation method may save two of the present in-use temperature and pressure gages, thus considerably increasing the reliability of the propulsion unit. Owing to the expected higher system reliability and system simplicity, small unmanned aerial vehicles, as well as small automotive engines of various types, may significantly benefit from this proposed method. The method principles, rationale, and some preliminary results are presented.

scholarly journals Analytical Approach to the Exergy Destruction and the Simple Expansion Work Potential in the Constant Internal Energy and Volume Combustion Process

Energies ◽  
2020 ◽  
Vol 13 (2) ◽  
pp. 395
Author(s):  
Jeongwoo Song ◽  
Han Ho Song
Keyword(s):  
Internal Combustion Engine ◽  
Analytical Approach ◽  
Combustion Engine ◽  
Combustion Process ◽  
Internal Combustion ◽  
Thermodynamic System ◽  
Exergy Destruction ◽  
Engine Operation ◽  
System Temperature ◽  
Simple Expansion

The exergy destruction due to the irreversibility of the combustion process has been regarded as one of the key losses of an internal combustion engine. However, there has been little discussion on the direct relationship between the exergy destruction and the work output potential of an engine. In this study, an analytical approach is applied to discuss the relationship between the exergy destruction and efficiency by assuming a simple thermodynamic system simulating an internal combustion engine operation. In this simplified configuration, the exergy destruction during the combustion process is mainly affected by the temperature, which supports well-known facts in the literature. However, regardless of this exergy destruction, the work potential in this simple engine architecture is mainly affected by the pressure during the combustion process. In other words, if these pressure conditions are the same, increasing the system temperature to reduce the exergy destruction does not lead to an increase in the expansion work; rather, it only results in an increase in the remaining exergy after expansion. In a typical internal combustion engine, temperatures before combustion timing must be increased to reduce the exergy destruction, but increasing pressure before combustion timing is a key strategy to increase efficiency.

Effect of IC Engine Operating Conditions on Combustion and Emission Characteristics

1993 ◽  
Vol 115 (4) ◽  
pp. 694-701 ◽  
Author(s):  
Jiang Lu ◽  
Ashwani K. Gupta ◽  
Eugene L. Keating
Keyword(s):  
Internal Combustion Engine ◽  
Combustion Chamber ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Operating Conditions ◽  
Emission Characteristics ◽  
Ic Engine ◽  
Pollutants Emission ◽  
Good Agreement

Numerical simulation of flow, combustion, heat release rate, and pollutants emission characteristics have been obtained using a single cylinder internal combustion engine operating with propane as the fuel. The data show that for good agreement with experimental results on the peak pressure and the rate of pressure rise as a function of crank angle, spark ignition energy and local cylinder pressure must be properly modeled. The results obtained for NO and CO showed features which are qualitatively in good agreement and are similar to those reported in the literature for the chosen combustion chamber geometry. The results have shown that both the combustion chamber geometry and engine operating parameters affects the flame growth within the combustion chamber which subsequently affects the pollutants emission levels. The code employed the time marching procedure and solves the governing partial differential equations of multicomponent chemically reacting fluid flow by finite difference method. The numerical results provide a cost effective means of developing advanced internal combustion engine chamber geometry design that provides high efficiency and low pollution levels. It is expected that increased computational tools will be used in the future for enhancing our understanding of the detailed combustion process in internal combustion engines and all other energy conversion systems. Such detailed information is critical for the development of advanced methods for energy conservation and environmental pollution control.

Simulation of Instantaneous Heat Transfer in Spark Ignition Internal Combustion Engines: Unsteady Thermal Boundary Layer Modelling

2009 ◽  
Author(s):  
David R. Buttsworth ◽  
Abdalla Agrira ◽  
Ray Malpress ◽  
Talal Yusaf
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Internal Combustion Engine ◽  
Thermal Boundary Layer ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Restrictive Assumption ◽  
Low Dimensional ◽  
Energy Equations

Simulation of internal combustion engine heat transfer using low-dimensional thermodynamic modelling often relies on quasi-steady heat transfer correlations. However, unsteady thermal boundary layer modelling could make a useful contribution because of the inherent unsteadiness of the internal combustion engine environment. Previous formulations of the unsteady energy equations for internal combustion engine thermal boundary layer modelling appear to imply that it is necessary to adopt the restrictive assumption that isentropic processes occur in the gas external to the thermal boundary layer. Such restrictions are not required and we have investigated if unsteady modelling can improve the simulation of crank-resolved heat transfer. A modest degree of success is reported for the present modelling which relies on a constant effective turbulent thermal conductivity. Improvement in the unsteady thermal boundary layer simulations is expected in future when the temporal and spatial variation in effective turbulent conductivity is correctly modelled.

Sign in / Sign up

Export Citation Format

Share Document