Effect of Phosphorus and Zinc Interaction on Performance of Green Gram [Vigna radiata (L.) Wilczek]

2020 ◽  
Author(s):  
Mamta Phogat ◽  
Padma Angmo ◽  
A. K. Mondal ◽  
Sunil Kumar ◽  
A. P. Rai
Keyword(s):  
Plant Height ◽  
Vigna Radiata ◽  
Seed Weight ◽  
Block Design ◽  
Green Gram ◽  
Growth And Yield ◽  
Treatment Level ◽  
Yield Attributes ◽  
Stover Yield ◽  
Four Levels

The experiment comprising of four levels of phosphorus, i.e., 0, 20, 40 and 60 kg ha-1 and four levels of zinc, i.e., 0, 5, 10 and 15 kg ha-1 was conducted to investigate the interaction effect of phosphorus and zinc fertilization on yield and yield attributes of green gram [Vigna radiata (L.) Wilczek] cv. SML-668. The treatments were laid out in Randomized Block Design (Factorial) with three replications. The results revealed that plant height, number of pods plant-1, 1000 seed weight, seed and stover yield were increased significantly up to 60 kg ha-1 phosphorus and 10 kg ha-1 zinc treatment levels. Further increase in zinc levels found to decrease the yield and yield attributing traits, indicating antagonistic effect of phosphorus and zinc on each other. The highest plant height, number of pods plant-1, 1000 seed weight, seed and stover yield (at 60 kg P ha-1 and 10 kg Zn ha-1 treatment level) were 48.70 cm, 27.15, 32.70 g, 957.25 and 2398.30 kg ha-1, respectively. Thus, interaction of phosphorus and zinc was significant for all the growth and yield attributing parameters.

scholarly journals GROWTH AND YIELD EVALUATION OF MUSTARD VARIETIES GROWN IN A MEDIUM HIGHLAND OF KHULNA REGION

2021 ◽  
Vol 18 (1) ◽  
pp. 1-8
Keyword(s):  
Seed Weight ◽  
Harvest Index ◽  
Block Design ◽  
Growth Yield ◽  
Growth And Yield ◽  
Rabi Season ◽  
Yield Attributes ◽  
Randomized Complete Block Design ◽  
Stover Yield ◽  
Number Of Seeds

The present research was conducted at the experimental field of Agrotechnology Discipline, Khulna University, Khulna during Rabi season 2016-17 to investigate the growth and yield performance of mustard varieties. The experiment was arranged in a randomized complete block design consisting of eight mustard varieties (viz. BARI Sarisha-8, BARI Sarisha-11, BARI Sarisha-13, BARI Sarisha-14, BARI Sarisha-15, BARI Sarisha-16, Rai and Tori-7) as treatment and replicated thrice. All the growth, yield attributes and yield were substantially influence among the mustard varieties except the phenological parameters. Results of the experiment showed that the highest plant height (131.33 cm), seed yield (1813.33 kg ha-1) and stover yield (3876.67 kg ha-1) were found in BARI Sarisha-16. BARI Sarisha-11 was found better in respect of maximum siliqua plant-1, weight of seeds plant-1, 1000-seed weight and harvest index. Besides this, BARI Sarisha-14 showed the maximum number of seeds siliqua-1. Therefore, findings of this study suggested that BARI Sarisha-16 would be suitable for better productivity and recommended for cultivation in the medium highland of Khulna region of Bangladesh.

scholarly journals Effect of phosphorus on growth and yield of sesame

2019 ◽  
Vol 6 (2) ◽  
pp. 245-251
Author(s):  
Nushrat Jahan ◽  
ABM Shafiul Alam ◽  
Atiya Sharmin Mitu ◽  
Md Ahasan Habib ◽  
Md Sefaur Rahman
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Seed Weight ◽  
Harvest Index ◽  
Block Design ◽  
Growth And Yield ◽  
Stover Yield ◽  
Biological Yield ◽  
Number Of Leaves ◽  
P Application

The present study was conducted at the Research farm of Sher-e-Bangla Agricultural University, Sher-e-Bangla Nagar, Dhaka, during March to June 2014 to examine the effect of Phosphorus on the growth and yield of Sesame. BARI Til-3 variety was used for the study. This experiment was consisted of single factor eg. phosphorus. There were three levels of phosphorus viz. (i) P0 (0 % P), (ii) P1 (20 % P) and (iii) P2 (30 % P) and the experiment was laid out in a Randomized Complete Block Design (RCBD) with six replications. Different levels of phosphorus showed significant effect on growth and yield of sesame. Individually phosphorus had significant effect on highest plant height, number of leaves plant-1, number of primary branches plant-1, number of secondary branches plant-1, number of capsule plant-1, number of seeds capsule-1, 1000 seed weight, seed yield and harvest index. The highest plant height of sesame (136.30 cm), the highest no leaves plant-1 of sesame (34.44), number of primary branches plant-1 (5.56), number of secondary branches plant-1 (7.61), number of capsule plant-1 (25.87), number of seed capsule-1 (70.47),1000 seed weight (3.54), Seed yield (1581.00 kg ha-1), Stover yield (3034.42 kg ha-1), biological yield (4615.76), harvest index (34.11%), oil content (43.92%) was recorded from P1. Again, the highest days to first flowering of sesame (31.67) was recorded from P1 (20 % P) but the highest days to maturity was (85.67) recorded from P2 (30% P). Application of P at different percentage is causing effect in growth and yield of sesame. Res. Agric., Livest. Fish.6(2): 245-251, August 2019

scholarly journals Effect of sowing methods and weeding regimes on the yield of Sesame (Sesamum indicum L.)

2022 ◽  
Vol 8 (3) ◽  
pp. 291-299
Author(s):  
Afroza Khanam ◽  
Md Abdus Salam ◽  
Md Romij Uddin ◽  
Md Golam Rabbani ◽  
Shohrab Hoshain
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Seed Weight ◽  
Block Design ◽  
Yield Attributes ◽  
Free Treatment ◽  
Stover Yield ◽  
Biological Yield ◽  
Number Of Seeds ◽  
Number Of Branches

The experiment was conducted at the Agronomy Field Laboratory, Bangladesh Agricultural University to observe the effect of sowing methods and weeding regimes on the yield of sesame. The experiment comprised of two factors. Two methods of sowing i.e., broadcasting and line sowing (S2), and six weeding regimes- control (T0), weed free (T1), one hand weeding at 15 DAS (T2), two hand weedings at 15 and 30 DAS (T3), three hand weedings at 15, 30 and 45 DAS (T4) and application of Panida (Pendimethalin) herbicide (T5) at 3 DAS. The experiment was laid out in a randomized complete block design (RCBD) with three replications. Almost all the yield characters of sesame were affected significantly due to sowing methods, weeding regime and their interaction. Result showed that the l ine sowing showed better performance regarding plant height (100.40 cm), number of branches (4.983) plant–1, number of capsules plant–1 (47.82), number of seeds capsule–1 (69.66), 1000–seed weight (2.96 g), seed yield (956.90 kg ha–1), stover yield (2167.0 kg ha–1), biological yield (3123.00 kg ha–1) and harvest index (31.45%) than that of broadcasting method. Also weed free treatment had the highest plant height (101.90 cm), highest number of branches (5.00) plant-1, highest capsule (47.08) plant–1, heaviest 1000–seed weight (3.28 g), highest number of seeds capsule–1 (76.22), highest seed yield (974.30 kg ha–1), stover yield (2947.0 kg ha–1) and biological yield (3922.0 kg ha–1) as compared to other treatments while unweeded plot had least significant effect among the whole yield and yield attributes of sesame. In case of interactions, both weed free treatment and herbicidal effect with line sowing methods produced the highest plant height, number of branches and capsules plant–1, seeds capsule–1, seed yield, stover yield and biological yield (109.80 cm, 5.967, 56.57, 81.53, 1054.0 kg ha–1, 3139.0 kg ha–1 and 4193.0 kg ha–1, respectively) as compared to other interaction combinations. The results of the study reveal that the weed free treatment along with line sowing would be the proper technique for higher production of sesame. But line sowing along with application of Panida herbicide would be the best combination for obtaining higher yield of sesame since it is not feasible for the farmers to keep their field weed free throughout all the growing periods. Res. Agric., Livest. Fish.8(3): 291-299, December 2021

scholarly journals Response of growth and yield of two soybean varieties to seed pre-treatment applications

2021 ◽  
Vol 883 (1) ◽  
pp. 012052
Author(s):  
N Herawati ◽  
A R Aisah ◽  
I Mardian ◽  
B N Hidayah ◽  
B T R Erawati
Keyword(s):  
Plant Height ◽  
Seed Treatment ◽  
Seed Quality ◽  
Block Design ◽  
Growth And Yield ◽  
Agronomic Crops ◽  
Randomized Block Design ◽  
Two Factors ◽  
Pre Treatment ◽  
Four Levels

Abstract Plant growth is influenced by seed quality. Seeds need to be treated to prevent pest and disease disorders or to increase seed germination. Soybean planting was carried out in this study by the treatment of varieties and seed pre-treatment application before planting. The study aimed to measure the growth and yield of soybeans by varieties and seed treatment before planting, carried out in the Village of Nggembe, District of Bolo, Bima Regency. The study used factorial randomized block design with two factors. The first factor was soybean varieties consisting of two levels, namely Devon and Dena varieties, and the second factor was the application of pre-planting seed treatments consisting of four levels namely Cruiser, Marshall, Agrisoy, and without seed treatment, each treatment was repeated three times. Observations were made on the performance of agronomic crops and soybean yields. The results showed that the treatment of soybean varieties and the application of seed treatment had a significant influence on plant height and soybean productivity, and both treatments had interactions on parameters of plant height, number of filled pods, weight of 100 seeds, and soybean productivity with the best results successively produced by a combination of Devon-Control, Devon-Marshall, Devon-Agrisoy, and Dena-Cruiser.

scholarly journals Effect of Arbuscular Mycorrhizal Fungi on the Tolerance to Sodium Chloride Levels, and on Growth and Yield of Lentil (Lens culinaris)

2017 ◽  
Vol 15 (1) ◽  
pp. 156-169 ◽  
Author(s):  
M Rahman ◽  
MAH Bhuiyan ◽  
ME Ali ◽  
F Alam ◽  
RA Begum
Keyword(s):  
Sodium Chloride ◽  
Seed Yield ◽  
Mycorrhizal Fungi ◽  
Agricultural Research ◽  
Block Design ◽  
Growth And Yield ◽  
Yield Attributes ◽  
Stover Yield ◽  
Mycorrhizal Inoculation ◽  
Mycorrhizal Plants

A pot experiment was carried out in the nethouse of Soil Science Division, Bangladesh Agricultural Research Institute, Joydebpur, Gazipur during 2014-2015 through 2015-2016. The design of the experiment was factorial randomized completely block design with 4 replications. The objectives of the study were to evaluate the potential of Arbuscular mycorrhization (AM) on the germination, yield and yield attributes of lentil treated with different concentration of sodium chloride (NaCl). Five NaCl treatments (0, 1, 2, 3 and 4%) possessed NaCl level as the first factor that were treated with soils before sowing of lentil seeds overriding or pivotal pulse crop in Bangladesh. The second factor consists of mycorrhizal and non-mycorrhizal treatments. Mycorrhizal plants showed better performance in terms of germination %, yield and yield contributing characters than non-mycorrhizal plants. With increasing NaCl concentration germination %, yield and yield contributing characters in the rhizosphere soil, decreased significantly (p<0.01). Interaction effects of mycorrhizal inoculation and NaCl on germination %, growth and yield of lentil were appeared to be statistically non-significant. The highest germination (96.25% in 2014-2015 and 92.50% in 2015-2016), seed yield (6.45 g pot-1 in 2014-2015 and 5.89 g pot-1 in 2015-2016), and stover yield (9.55 g pot-1 in 2014-2015 and 8.58 g pot-1 in 2015-2016) was found in NaCl 0% + AM treatment. The lowest germination %, seed yield and stover yield was found in NaCl 4% treatment. Mycorrhizal inoculation increased seed yield on an average by 31.85% during 2014-2015 and 63.71% during 2015-2016, and increased stover yield on an average by 48.56% during 2014-2015 and 63.55% during 2015-2016 over non-mycorrhizal inoculation. Therefore, it can be concluded that mycorrhizal inoculation increases germination %, growth and yield of lentil over non-mycorrhizal inoculation. The Agriculturists 2017; 15(1) 156-169

Effect of nutrient management on productivity and economics of soybean

2017 ◽  
Vol 2 (02) ◽  
pp. 206-209
Author(s):  
Y. A. Bhosale ◽  
D. P. Pacharne
Keyword(s):  
Nutrient Management ◽  
Block Design ◽  
Foliar Spray ◽  
Growth And Yield ◽  
Silty Clay ◽  
Yield Attributes ◽  
Net Returns ◽  
Randomized Block Design ◽  
Stover Yield ◽  
Economic Indices

A field experiment was conducted during kharif season of 2015 on silty clay loam soil at MPKV, Rahuri (MS), to study the varying nutrient management levels on productivity and economics of different soybean varieties. The experiment was laid out in factorial randomized block design with 15 combinations of three varieties (KDS-344, JS-9305 and KS-103) and five nutrient management levels ( GRDF, 75% GRDF + 0.5% foliar spray of grade IInd at 30 and 45 DAS, 100% GRDF + 0.5% foliar spray of grade IInd at 30 and 45 DAS, N4: 125% GRDF + 0.5% foliar spray of grade IInd at 30 and 45 DAS and 50:75:30 N, P2O5, K2O kg ha-1 + 5 tons FYM ha-1. The variety KDS-344 and application of nutrient management dose 125% GRDF + 0.5 Grade IInd foliar spray at 30 and 45 DAS recorded significantly the highest growth and yield attributes viz., plant height (cm), number of branches, number root of nodules, number of pod plant-1 and weight of seeds plant-1 (g). The variety KDS-344 recorded highest grain and stover (3.66 and 4.64 t /ha) yield and highest economic indices like cost of cultivation (40,623), net monetary returns (87355) and net returns per rupee invested (3.17). The grain yield (4.34 t/ha) and stover yield (4.53 t/ha) of soybean was significantly higher by application of fertilizer dose of 125% GRDF + 0.5% Grade IInd foliar spray at 30 and 45 DAS than rest of treatments, but it was also at par with 75% GRDF + 0.5 Grade IInd foliar spray at 30 and 45 DAS and 100% GRDF + 0.5% Grade IInd foliar spray at 30 and 45 DAS. Similarly, variety KDS-344 and application of nutrient levels of 75 % GRDF + 0.5 % Grade IInd foliar spray at 30 and 45 DAS recorded the highest net returns (82756) and net returns per rupee invested (3.24) in soybean due to reduce in cost of cultivation (36931) and nutrient losses.

scholarly journals The Study of Herbicide Kinds and Tillage Methods on the Growth and Yield of Mung Bean (Vigna radiata L)

2018 ◽  
Vol 19 (1) ◽  
pp. 7
Author(s):  
Supriyadi Supriyadi
Keyword(s):  
Vigna Radiata ◽  
Mung Bean ◽  
Seed Weight ◽  
Plant Biomass ◽  
Block Design ◽  
Least Square ◽  
Growth And Yield ◽  
Main Plot ◽  
Tillage Method ◽  
Tillage Methods

<p>The objective of this research was finding the answer to comprehend the influence of herbicide kinds, tillage methods, and interaction between them on the growth and yield of mung bean (<em>Vigna radiata</em> L). The thinking background of this research is that mung bean is not tolerant with weed competition, meanwhile herbicide that can control weed on mung bean crop hasn’t been found yet. Sometimes tillage is need to control weed, too. But the effect of tillage on increasing the yield of mung bean hasn’t been completely recognized.</p><p>The research was carried out in Karangasem village, Surakarta, in about 106 meter height sea level water, at Entisol soil. The research was designed with Randomized Completely Block Design (RCBD) that arranged according to Split Plot Design, that had 2 factors with 12 treatment combinations and every combination was replicated 4 times. The first factor was tillage method as main plot, that had 3 levels as follow: no-tillage method (P0), one time tillage method (P1), and two times tillage method (P2). The second factor was herbicide kind as sub plot, that had 4 levels as follows: control (H0), Isopropylamine Glyphosate herbicide/Roundup (H1), Oxadiazone herbicide/Ronstar 250 EC (H2), and Oxyfluorfen herbicide/Goal 2E (H3). The result was analyzed with Analysis of Variance on 1% and 5% level and then analyzed with Least Square Design (LSD) test if Anova test showed significant result.</p><p>From the result of this research, we can concluded that Roundup is able to increase total mature pods and dry seed weight of mung bean, but not significantly affecting all other research variables. Goal and Ronstar can make the plant height and fresh plant biomass of mung bean lower, and not significantly affecting total mature pods, total immature pods, total unfilled pods, dry seed weight, and 100 dry seed weight of mung bean. Meanwhile Ronstar is not significantly affecting. Goal can make the dry plant biomass of mung bean lower. The tillage method treatments and interaction between tillage method and herbicide kind treatments is not significantly affecting all studied variables.</p>

scholarly journals Effect of Agronomic Biofortification of Sulphur and Boron on the Growth and Yield of Mustard (Brassica campestris L.) Crop

2020 ◽  
pp. 1-8
Author(s):  
M. A. Awal ◽  
M. H. O. Rashid ◽  
M. M. Rahman
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Dry Matter ◽  
Block Design ◽  
Growth And Yield ◽  
Combine Application ◽  
Dry Matter Accumulation ◽  
Yield Attributes ◽  
Mustard Crop ◽  
Agronomic Biofortification

Background and Objective: Sulphur and boron are found as most critical nutrient elements for the better growth and yield of mustard crop however no such concrete information for their uses in field production of this crop is yet to be reported. Therefore, an experiment was conducted to investigate the effect of agronomic biofortification of sulphur and boron nutrients on the growth and yield of mustard crop. Study Design: The experiment was laid out in a Randomized Complete Block Design (RCBD) with three replicates. Place of Study: The experiment was carried out in the Crop Botany Field Laboratory, Bangladesh Agricultural University, Mymensingh. Methodology: Three doses of sulphur (S) viz. 0, 20 and 40 kg ha-1 and three doses of boron (B) viz. 0, 0.5 and 1.0 kg ha-1 and their possible combinations were used as basal doses. Field data were collected from periodic destructive samplings on the plant height, number of leaves and branches per plant, total dry matter accumulation and finally yield components and yield. Results: Sulphur and boron fertilizations significantly influence the plant height, production of branches and leaves per plant, dry matter accumulation and yield attributes and yield of mustard crop. The mustard crop fertilized with 40 kg S ha-1 in combination with 1 B kg ha-1 produced taller plant, higher number of branches and leaves in each plant and higher amount of dry matter per plant while these plant traits were found as minimum when the growing the mustard crops in control plots i.e. the plants received neither sulphur nor boron. Application of sulphur @ 40 kg ha-1 along with boron @ 1 kg ha-1 produced the highest seed yield (2.73 t ha-1) whereas the lowest seed yield (1.08 t ha-1) was found where no sulphur and boron were applied. Conclusion: The result conclude that combine application of sulphur and boron @ 40 and 1 kg per hectare, respectively was found to be most effective dose in enhancing growth and yield of mustard crop.

scholarly journals Effect of Biochar Application as a Soil Amendment on Growth and Yield of Sesame (Sesamumindicuml.)

2020 ◽  
Vol 22 (2) ◽  
pp. 113-127
Author(s):  
TS Roy ◽  
MT Rahaman ◽  
R Chakraborty ◽  
M Mostofa ◽  
MS Rahaman
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Block Design ◽  
Growth And Yield ◽  
Randomized Complete Block Design ◽  
Stover Yield ◽  
Two Factors ◽  
Biological Yield ◽  
Number Of Leaves ◽  
Different Levels

The experiment was conducted to study the effect of biochar on growth and yield of sesame. In the experiment, the treatment consisted of three varieties, viz., V1 = BARI Til- 2, V2 = BARI Til-3 and V3 = BARI Til-4, and five levels of biocharviz., B0= control (no biochar application), B1= 2 t ha-1, B2= 4 t ha-1, B3= 6 t ha-1 and B4= 8 t ha-1. The experiment was laid out in two factors randomized complete block design (RCBD) with three replications.Variety, application of different levels of biochar and their interaction showed statistically significant variation in plant height, number of leaves plant-1at 55 and 80 DAS and at harvest, capsules plant-1, seeds capsule-1, 1000-seed weight, seed yield, stover yield, biological yield and harvest index.The highest plant height (70.34, 110.95 and 109.84 cm at 55 and 80 DAS and at harvest respectively), number of leaves plant-1 (80.47, 116.70 and 94.54 at 55, 80 DAS and at harvest, respectively), number of branches plant-1 (3.60), capsules plant-1(80.47), number of seeds capsule-1(56.02),seed yield(1.07tha-1)andharvestindex(36.46%)were observed in the variety BARI Til-4 cultivated with the application of biochar @ 6 t ha-1 (V3*B3) and the lowest one was observed in variety BARI Til-2 with no biochar application (V1*B0).Biochar is effective for increasing growth and yield of sesame. Bangladesh Agron. J. 2019, 22(2): 113-127

scholarly journals Growth and yield of bari mung-5 (Vigna radiata L. Wilczek) following TIBA application

2014 ◽  
Vol 23 (2) ◽  
pp. 179-185
Author(s):  
AMM Golam Adam ◽  
Nargis Jahan
Keyword(s):  
Plant Height ◽  
Vigna Radiata ◽  
Harvest Index ◽  
Dry Matter ◽  
Positive Response ◽  
Growth And Yield ◽  
Yield Attributes ◽  
Treatment Number ◽  
Number Of Branches

An experiment was conducted to evaluate the effect of TIBA (0, 20, 50, 100, 150 mg/l) on the growth and yield attributes of BARI Mung?5 laid out in RBD. Plant height decreased due to TIBA treatments. Number of branches and leaves per plant were found to increase in all the treatments at all the ages of growth except at 7 DAS and the maximum number of branches and leaves were recorded due to 20 mg/l TIBA treatment. Dry matter per plant increased due to 20 mg/l TIBA in most cases and was significantly highest at harvest. All the yield contributing characters showed positive response to 20 mg/l TIBA treatment. Number of pods and seeds per plant and fresh and dry weights of pods significantly differed from all other treatments. Increase in yield per plant and yield per hectare following 20 mg/l TIBA was 22.60 and 22.80% over the control, respectively. The highest harvest index was also recorded from 20 mg/l TIBA followed by control. DOI: http://dx.doi.org/10.3329/dujbs.v23i2.20098 Dhaka Univ. J. Biol. Sci. 23(2): 179-185, 2014

Sign in / Sign up

Export Citation Format

Share Document