scholarly journals Effect of Agronomic Biofortification of Sulphur and Boron on the Growth and Yield of Mustard (Brassica campestris L.) Crop

2020 ◽  
pp. 1-8
Author(s):  
M. A. Awal ◽  
M. H. O. Rashid ◽  
M. M. Rahman
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Dry Matter ◽  
Block Design ◽  
Growth And Yield ◽  
Combine Application ◽  
Dry Matter Accumulation ◽  
Yield Attributes ◽  
Mustard Crop ◽  
Agronomic Biofortification

Background and Objective: Sulphur and boron are found as most critical nutrient elements for the better growth and yield of mustard crop however no such concrete information for their uses in field production of this crop is yet to be reported. Therefore, an experiment was conducted to investigate the effect of agronomic biofortification of sulphur and boron nutrients on the growth and yield of mustard crop. Study Design: The experiment was laid out in a Randomized Complete Block Design (RCBD) with three replicates. Place of Study: The experiment was carried out in the Crop Botany Field Laboratory, Bangladesh Agricultural University, Mymensingh. Methodology: Three doses of sulphur (S) viz. 0, 20 and 40 kg ha-1 and three doses of boron (B) viz. 0, 0.5 and 1.0 kg ha-1 and their possible combinations were used as basal doses. Field data were collected from periodic destructive samplings on the plant height, number of leaves and branches per plant, total dry matter accumulation and finally yield components and yield. Results: Sulphur and boron fertilizations significantly influence the plant height, production of branches and leaves per plant, dry matter accumulation and yield attributes and yield of mustard crop. The mustard crop fertilized with 40 kg S ha-1 in combination with 1 B kg ha-1 produced taller plant, higher number of branches and leaves in each plant and higher amount of dry matter per plant while these plant traits were found as minimum when the growing the mustard crops in control plots i.e. the plants received neither sulphur nor boron. Application of sulphur @ 40 kg ha-1 along with boron @ 1 kg ha-1 produced the highest seed yield (2.73 t ha-1) whereas the lowest seed yield (1.08 t ha-1) was found where no sulphur and boron were applied. Conclusion: The result conclude that combine application of sulphur and boron @ 40 and 1 kg per hectare, respectively was found to be most effective dose in enhancing growth and yield of mustard crop.

Efficacy of Post Emergence Herbicides in Groundnut

2020 ◽  
Author(s):  
S. U. Kakade ◽  
J. P. Deshmukh ◽  
M. S. Solanke ◽  
S. S. Thakare ◽  
W. V. More
Keyword(s):  
Weed Control ◽  
Weed Management ◽  
Dry Matter ◽  
Block Design ◽  
Growth Yield ◽  
Growth And Yield ◽  
Soil Conditions ◽  
Dry Matter Accumulation ◽  
Yield Attributes ◽  
Pod Yield

Background: Groundnut encounters severe infestation of weed especially during the early stages of growth due to less crop canopy which allows higher weeds growth and thus crop becomes more susceptible to weed competition. During rainy season, effective and economical weed control is not possible through manual and mechanical weeding due to unfavorable soil conditions and also the unavailability of costly labours. Herbicides have been accepted as cost effective tool to manage weed menace in groundnut. The current study aims to study the efficancy of different post-emergence and pre-mix combination of post-emergence herbicides on weeds, growth and yield of groundnut. Methods: The field experiment was conducted at AICRP Weed Management field, Department of Agronomy, Dr. Panjabrao Deshmukh Krishi Vidyapeeth, Akola (M.S.) during three consecutive Kharif seasons of 2015- 2017. The experiment was laid out in Randomized Block Design with ten treatments replicated thrice. The treatments comprised of one pre emergence and five different post emergence herbicides and compared with weed free and weedy check. Result: The results revealed that weed free was found most effective to control weeds in groundnut with lowest weed count, weed dry matter of weeds and maximum gross monetary returns (Rs.117641/ha), net monetary returns (Rs.80894/ha). Among the herbicides, application of Imazethapyr + Imazomox 0.10 kg /ha POE 20 DAS produced less weed count and weed dry matter and highest weed control efficiency (80.68%) and lower weed index (6.71% ) as well as maximum growth, yield attributes and pod yield in groundnut over all the other herbicidal treatments viz. plant height (30.25), dry matter accumulation (18.11g), number of pods/plant (32.35) and pod yield (2448 kg/ha) and highest pooled B:C ratio (3.74).

scholarly journals Effect of Sowing Methods and NPK Levels on Growth and Yield of Rainfed Maize (Zea maysL.)

Scientifica ◽  
2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Shamim Gul ◽  
M. H. Khan ◽  
B. A. Khanday ◽  
Sabeena Nabi
Keyword(s):  
Leaf Area Index ◽  
Leaf Area ◽  
Plant Height ◽  
Seed Weight ◽  
Dry Matter ◽  
Growth And Yield ◽  
Dry Matter Accumulation ◽  
Area Index ◽  
Yield Attributes ◽  
100 Seed Weight

To investigate the response of rainfed maize to sowing methods and NPK levels, an experiment was undertaken during kharif of 2011 and 2012 at Dryland (Kerawa) Agriculture Research Station, Sher-e-Kashmir University of Agricultural Sciences and Technology of Kashmir, Budgam. The experiment was laid out in a randomized block design with combination of 2 sowing methods (flat sowing, 75 cm apart rows, and ridge sowing, 75 cm apart ridges) and 3 fertility levels (60 : 40 : 20, 75 : 50 : 30, and 90 : 60 : 40 N : P2O5 : K2O kg ha−1) with three replications. Various growth characters, namely, plant height, leaf area index, dry matter accumulation, number of days to different phenological stages, and yield, and yield contributing characters namely, cob length, number of grains cob−1, cob diameter (cm), and 100-seed weight (g), were significantly higher with S2over S1during both the years of experimentation. Fertilizer levels F3(90 : 60 : 40) and F2(75 : 50 : 30) at par with one another produced significant increase in growth and yield characters, namely, plant height, leaf area index, dry matter production at different growth stages, cob length, number of cobs plant−1, number of grains cob−1, and 100-seed weight over F1(60 : 40 : 20). Significantly higher grain yield was recorded with fertilizer level F3(90 : 60 : 40) being at par with F2(75 : 50 : 30) and showed significant increase over F1(60 : 40 : 20) with superiority of 5.4 and 5.7 per cent during 2011 and 2012, respectively. The findings of the study concluded that ridge method of sowing of maize with NPK levels of 75 : 50 : 30 kg ha−1showed better performance of crop in terms of growth, yield, and yield attributes.

scholarly journals Response of growth, yield attributes and yield to the application of KNap and NAA in cowpea (Vigna unguiculata (L.) Walp.)

1970 ◽  
Vol 36 (2) ◽  
pp. 127-132
Author(s):  
Md Jafar Ullah ◽  
Quazi Abdul Fattah ◽  
Feroza Hossain
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Vigna Unguiculata ◽  
Dry Matter ◽  
Growth Yield ◽  
Dry Matter Accumulation ◽  
Yield Attributes ◽  
Almost All ◽  
Pod Length ◽  
Number Of Seeds

Six concentrations each of KNap and NAA along with a control were tested on cowpea cv. Bari Falon- 2. Results showed that irrespective of treatment differences, dry matter of cowpea (Vigna unguiculata) increased during 60 to 105 DAS. Concentrations above 50 ppm NAA increased plant height. The dry matter and yield increased with the increasing of the concentrations of KNap and NAA up to 1250 and 50 ppm, respectively. No significant differences of dry matter accumulation, grain yield and almost all the yield attributes were observed in between 1250 ppm KNap and 50 ppm NAA. The highest values of dry matter/plant (54.52 g), pod length (13.15 cm), number of pods/plant (10.29), number of seeds/pod (10.61), 1000 seed weight (122 g), seed yield/plant (15.51 g), seed yield/ha (1630 kg) and harvest index (37.32 %) were obtained due to application of 1250 ppm KNap. Yield attributes had significantly positive correlation amongst them.   Key words: Cowpea, Vigna unguiculata, Plant height, Dry matter, Yield DOI = 10.3329/bjb.v36i2.1500 Bangladesh J. Bot. 36(2): 127-132, 2007 (December)

Response of fertility and agro-chemical on growth and yield of different varieties of Clusterbean

2019 ◽  
Vol 5 (02) ◽  
pp. 213-217
Author(s):  
Rekha Yogi ◽  
O. P. Sharma ◽  
H. P. Verma ◽  
Krishna P. Kanwar ◽  
A. C. Shivran
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Dry Matter ◽  
Block Design ◽  
Test Weight ◽  
Growth And Yield ◽  
Flowering Stage ◽  
Higher Plant ◽  
Stover Yield ◽  
Biological Yield

A field experiment was conducted during kharif season of 2013 to study response of clusterbean varieties to fertility levels and agro-chemicals at SKN College of Agriculture, Jobner. The experiment consisted of two varieties (RGC-1038 and RGC-1066), three treatments of fertility levels (control, 50% RDF and 100% RDF) and three treatments of agro-chemicals (control, thiourea 500 ppm twice at vegetative and pre flowering stage and thiourea 100 ppm twice at vegetative and pre flowering stage) thereby making eighteen treatment combinations tested in randomized block design with three replications. The results indicated that RGC 1066 variety recorded significantly higher plant height 60 DAS and at harvest and dry matter per meter row length at 30 DAS, 60 DAS and at harvest, number of pods/plant and seeds/pod, test weight, seed yield, stover yield and biological yield as compared to variety of RGC-1038. The result further indicated that application of fertilized 100% RDF significantly gave higher plant height at 60 DAS and at harvest similarly, dry matter per meter row length at 30 DAS, 60 DAS and at harvest, number of pods/plant and seeds/pod, test weight, seed yield, stover yield and biological yield recorded higher over control and fertilized with 50% RDF. Likewise, application of agro-chemical @ thiourea (500 ppm) significantly increased the plant height at 60 DAS and at harvest and dry matter per meter row length at 30 DAS, 60 DAS and at harvest, number of pods/plant and seeds/pod, test weight, seed yield, stover yield and biological yield and remained at par with the application of agro-chemical @ TGA (100 ppm) over control. However, plant height at 30 DAS remained materially unchanged under different varieties, fertility levels and agro-chemicals.

scholarly journals Evaluation of improved cassava genotypes for yield and related traits for a better breeding strategy under different agroecologies in Nigeria

Euphytica ◽  
2021 ◽  
Vol 217 (4) ◽  
Author(s):  
N. A. Adetoro ◽  
O. O. Oworu ◽  
A. L. Nassir ◽  
A. Bello ◽  
E. Parkes ◽  
...  
Keyword(s):  
Plant Height ◽  
Dry Matter ◽  
Block Design ◽  
Pasting Properties ◽  
Growth And Yield ◽  
Root Weight ◽  
Root Yield ◽  
Root Characteristics ◽  
Stay Green ◽  
Fresh Root

AbstractThis study aimed at determining shoot and root characteristics of cassava as affected by root yield and the influence of soil moisture on vegetative growth and yield. Thirty cassava genotypes were evaluated for morphological and physiological characterization in three locations in Nigeria: Ibadan, Mokwa and Zaria. Randomized complete block design was used with four replicates. Studies on the pasting properties of the genotypes were also carried out. Data were collected on plant height, stem girth, stay-green ability, garri and fresh root weight. Genotypes differed significantly (P < 0.05) across and within locations for shoot and root characteristics. Across locations, genotype 011663 had the highest plant height (132.4 cm); 30572 had the largest stem girth (8.6 cm); and 010040 was the best stay-green (2.2). Genotype 011086 had the highest number of roots per plot (95.7), 950289 had the highest fresh root yield (24.3 t/ha), and 990554 had the highest percentage of dry matter (35.2). Trends in root yields across locations were Ibadan (28.9 t/ha), Mokwa (20.3 t/ha), and Zaria (8 t/ha). Five genotypes IITA-TMS-IBA950289, 010034, 990554, 011807, and 980581 had negligible interactions with the environment and so have broad adaptation and are considered stable; and two clones 011807 and 950166 were found to be the best for pasting properties. Breeding strategies that consider root size, total root number, harvest index, dry matter, with applications for household foods and industrial uses, will be an effective and efficient way to select genotypes for high yield.

scholarly journals Effect of Arbuscular Mycorrhizal Fungi on the Tolerance to Sodium Chloride Levels, and on Growth and Yield of Lentil (Lens culinaris)

2017 ◽  
Vol 15 (1) ◽  
pp. 156-169 ◽  
Author(s):  
M Rahman ◽  
MAH Bhuiyan ◽  
ME Ali ◽  
F Alam ◽  
RA Begum
Keyword(s):  
Sodium Chloride ◽  
Seed Yield ◽  
Mycorrhizal Fungi ◽  
Agricultural Research ◽  
Block Design ◽  
Growth And Yield ◽  
Yield Attributes ◽  
Stover Yield ◽  
Mycorrhizal Inoculation ◽  
Mycorrhizal Plants

A pot experiment was carried out in the nethouse of Soil Science Division, Bangladesh Agricultural Research Institute, Joydebpur, Gazipur during 2014-2015 through 2015-2016. The design of the experiment was factorial randomized completely block design with 4 replications. The objectives of the study were to evaluate the potential of Arbuscular mycorrhization (AM) on the germination, yield and yield attributes of lentil treated with different concentration of sodium chloride (NaCl). Five NaCl treatments (0, 1, 2, 3 and 4%) possessed NaCl level as the first factor that were treated with soils before sowing of lentil seeds overriding or pivotal pulse crop in Bangladesh. The second factor consists of mycorrhizal and non-mycorrhizal treatments. Mycorrhizal plants showed better performance in terms of germination %, yield and yield contributing characters than non-mycorrhizal plants. With increasing NaCl concentration germination %, yield and yield contributing characters in the rhizosphere soil, decreased significantly (p<0.01). Interaction effects of mycorrhizal inoculation and NaCl on germination %, growth and yield of lentil were appeared to be statistically non-significant. The highest germination (96.25% in 2014-2015 and 92.50% in 2015-2016), seed yield (6.45 g pot-1 in 2014-2015 and 5.89 g pot-1 in 2015-2016), and stover yield (9.55 g pot-1 in 2014-2015 and 8.58 g pot-1 in 2015-2016) was found in NaCl 0% + AM treatment. The lowest germination %, seed yield and stover yield was found in NaCl 4% treatment. Mycorrhizal inoculation increased seed yield on an average by 31.85% during 2014-2015 and 63.71% during 2015-2016, and increased stover yield on an average by 48.56% during 2014-2015 and 63.55% during 2015-2016 over non-mycorrhizal inoculation. Therefore, it can be concluded that mycorrhizal inoculation increases germination %, growth and yield of lentil over non-mycorrhizal inoculation. The Agriculturists 2017; 15(1) 156-169

scholarly journals Effect of planting time on the growth and yield of chia (Salvia hispanica L.)

2016 ◽  
Vol 1 (3) ◽  
pp. 502-507 ◽  
Author(s):  
Md Masudul Karim ◽  
Md Ashrafuzzaman ◽  
Md Alamgir Hossain
Keyword(s):  
Seed Yield ◽  
Dry Matter ◽  
Block Design ◽  
Growth And Yield ◽  
Omega 3 ◽  
Contributing Factors ◽  
Salvia Hispanica ◽  
Planting Time ◽  
Salvia Hispanica L ◽  
Physiological Characters

Chia (Salvia hispanica L.) contains the highest level of omega- 3 fatty acid available in any cultivated plant source. The objective of this research was to find out the suitable planting time for chia in Bangladesh and to study the effect of planting time on its growth and yield. An experiment was carried out at the field laboratory of the Department of Crop Botany, Bangladesh Agricultural University (BAU), Mymensingh, during the period from November 2013 to July 2014 to study the growth, morpho-physiological yield contributing characters and yield of chia. The experiment was laid out in a Randomized Complete Block Design (RCBD) with three replications. The collected data were analyzed statistically and the means were adjudged by DMRT using the statistical computer package program, MSTAT_C. The tallest plant (136 cm), highest number of inflorescence plant–1 (13.67), highest amount of total dry matter (305 g) and highest root length (7.767 cm) were recorded from November planting at harvest. However, leaf area plant–1 (207.2 cm2) and LAI (1.891) had also significantly higher from November planting at 90 days after sowing (DAS) compared to other planting times. November planting further recorded the higher CGR (33.43 g m-2 day-1) at the stage between 76–90 DAS and thereafter they decreased. Higher seed yield (1033 Kg ha–1), husk yield (888 Kg ha–1), seed yield plant-1 (4.773 g), husk yield plant-1 (2.840 g) were also recorded from November planting. In December planting the seed yield, husk yield, seed yield plant-1, husk yield plant-1 were 681 Kg ha–1, 340 Kg ha–1, 2.350g and 0.9467g, respectively. Lower seed yield (159 Kg ha–1), husk yield (166 Kg ha–1), seed yield plant-1 (0.6150 g) and husk yield plant-1 (0.5383 g) were recorded from January planting. Except total dry matter, other morpho-physiological characters, yield and yield contributing factors were less effective in January than other planting time. February and March planting did not produce any fertile spike resulting yield less vegetative growth. These results revealed that, November planting was found outstanding superiority for plant growth, yield and morpho-physiological characters of chia in Bangladesh.Asian J. Med. Biol. Res. December 2015, 1(3): 502-507

Influence of primed seed and varying seed rate on growth and productivity of soybean (Glycine max L.) under different planting techniques

2018 ◽  
Author(s):  
Rupinder Kaur Jassal ◽  
Harmeet Singh
Keyword(s):  
Leaf Area Index ◽  
Leaf Area ◽  
Plant Height ◽  
Seed Yield ◽  
Dry Matter ◽  
Seed Priming ◽  
Dry Matter Accumulation ◽  
Area Index ◽  
Active Radiation ◽  
Seed Rate

An experiment was conducted at Punjab Agricultural University, Ludhiana during 2015 and 2016 to study the effect of priming, different seed rate on growth and seed yield of soybean planted under bed and flat method. The study was planned in factorial split plot design, keeping two planting techniques (flat sowing and bed sowing) and two seed priming treatments ( non primed seeds and 100 ppm GA3 primed seeds) in main plot and three seed levels ( 50, 62.5 and 75 kg ha-1) in sub plot. The objective of the study was to evaluate the effect of seed priming on growth and productivity under different planting techniques with the use of varying seed rates. The results revealed that growth attributes viz. emergence count, plant height, dry matter accumulation, leaf area index and photosynthetic active radiation interception (%) was significantly higher under bed planting technique as compared to flat sowing method. The pooled seed yield was increased by 15.6 % in bed planted soybean crop as compared to flat planted crop. Soybean seeds primed with 100 ppm GA3 recorded significant results in all the growth parameters. Primed seed recorded increase in yield 15.3 % than non primed seeds. Seed rate of 62.5 kg ha-1 recorded significantly higher emergence count, plant height, dry matter accumulation, leaf area index and photosynthetic active radiation interception (%) which was statistically similar in results with 75 kg ha-1 seed rate in both the two years. Pooled seed yield of 62.5 kg ha-1seed rate was 4.61 % higher than 75 kg ha-1 and 12.6 % than 50 kg ha-1 seed rate.

scholarly journals Growth and Yield of Onion as Influenced by Sulphur and Boron with Mulch Materials

2021 ◽  
pp. 1-14
Author(s):  
Sajeed Hasan Bappy ◽  
Khaleda Khatun ◽  
Tahmina Mostarin ◽  
Mutasim Fuad Shuvo ◽  
Mst. Umme Habiba ◽  
...  
Keyword(s):  
Plant Height ◽  
Dry Matter ◽  
Block Design ◽  
Matter Content ◽  
Growth And Yield ◽  
Leaf Number ◽  
Maximum Diameter ◽  
Dry Matter Content ◽  
Economic Point ◽  
Neck Diameter

A field experiment was conducted at the research farm of Sher-e-Bangla Agricultural University, Dhaka. During the period from October, 2018 to March, 2019 to find out the growth and yield of onion as influenced by Sulphur and Boron with mulch materials. The experiment consisted of two factors: Factor A: Four doses of Sulphurand Boron fertilizer viz. F0 = S0kgB0kg/ha (Control), F1 = S20kgB1kg/ha, F2 = S40kgB2kg/ha, F3 = S60kgB3kg/ha and Factor B: Four types of mulch viz. M0 = No mulch and no irrigation, M1 = Black polythene, M2 = Water hyacinth and M3 = Rice straw. There were 16 treatment combinations and experiment was setup in a Randomized Complete Block Design (RCBD) with three replications. In case of Sulphur and Boron treatments at 60 days after transplanting (DAT), the highest plant height 53.38 cm, maximum leaf number 10.48, highest bulb length 4.83 cm,, maximum neck diameter (1.31 cm), highest dry matter content (15.98%), dry matter content of leaf (24.74%), single bulb weight (39.93 g), yield per plot (0.80 kg) and yield per hectare (9.98 t) were obtained from F3 treatment. Among the mulch materials,  highest plant height at 60 DAT (52.51 cm), maximum leaf number (10.19), highest bulb length (4.52 cm), highest bulb diameter (5.74 cm), maximum neck diameter (1.26 cm), dry matter content of leaf (23.35%), single bulb weight (39.05 g), yield per plot (0.78 kg) and yield per hectare (9.76 t) were obtained from M1 treatment. In combined effect, the highest plant height at 60 DAT (55.54 cm), maximum leaf number (11.47), longest bulb length (5.51 cm), highest bulb diameter (6.68 cm), maximum diameter of neck (1.42 cm), dry matter content of leaf (27.48%), single bulb weight (42.40 g), yield per plot (0.85 kg) and yield per hectare (11.21 t) were obtained from F3M1 treatment (S60kg/ha + B3kg/ha with black polythene mulch). The highest gross return (Tk. 3, 36, 300/ha), net return (Tk. 1, 88, 934/ha) and benefit cost ration (2.28) was obtained from the treatment combination (F3M1). Accordingly, for high growth, high yield, and economic point of view, F3M1 treatment is recommended in onion cultivation.

scholarly journals Yield Performance of Mungbean Genotypes as Influenced by Herbicides with Different Weed Management Practices

2020 ◽  
Vol 4 (2) ◽  
pp. 88-100
Author(s):  
Shams Shaila Islam ◽  
Riyad Ul-Hasan Karim ◽  
Harmailis Chaniago ◽  
Sohrab Hossain
Keyword(s):  
Seed Yield ◽  
Weed Management ◽  
Dry Matter ◽  
Management Practices ◽  
Growth And Yield ◽  
Dry Matter Content ◽  
Yield Performance ◽  
Plant Seed ◽  
Yield Attributes ◽  
Hand Weeding

This research was conducted to investigate the effect of different herbicides with weed management practices on growth and yield performance of mungbean genotypes. The experiment consisted of two factors were mungbean genotypes and weed management. There were two genotypes namely BARI Mung 6 and BARI Mung 8. While there were five weed management practices namely control/no weeding and without herbicide application (T1), hand weeding at 20 and 40 DAS (T2), pre emergence herbicide (Panida) at 1-2 DAS (T3), pre emergence herbicide (Neon) at 2-3 DAS (T4), and post emergence herbicide (Neon) at 10-15 DAS+hand weeding (T5). The results revealed that BARI Mung 6 stand superior to BARI Mung 8 in respect of dry matter content/plant, pods/plant, seeds/plant, seed yield, and 1000 seed weight. Among weed management practices, maximum plant height (53.70 cm), dry matter weight/plant (17.96 g), pods/plant (18.31), seeds/plant (171.47), maximum weed control efficiency (33.78 %) obtained from T3 treatment. Based on the interaction effect showed that BARI Mung 6 weeded with pre emergence herbicide (Panida) at 1-2 DAS produced maximum seed yield (1.79 t/ha) as well as yield attributes showed 2.29 % higher seed yield.

Sign in / Sign up

Export Citation Format

Share Document