Improving the display performance of reflective color LCDs with micro-cone-structure film

1999 ◽  
Vol 7 (1) ◽  
pp. 67
Author(s):  
Xibin Shao ◽  
Jianxin Cuo ◽  
Sheng Wu ◽  
Jianfeng Yuan ◽  
Ximin Huang
1987 ◽  
Vol 65 (11) ◽  
pp. 2338-2351 ◽  
Author(s):  
E. E. McIver ◽  
J. F. Basinger

Fossil cedar foliage of the Cupressinocladus interruptus type, with associated seeds and cones, is locally abundant in Paleocene deposits of the Ravenscrag Formation, southwestern Saskatchewan, Canada. Vegetative remains of this type occur frequently in early Tertiary plant assemblages throughout the northern hemisphere, indicating that this now extinct cedar was once widespread. For the first time this cedar can be described on the basis of both vegetative and reproductive morphology. Foliage is frond-like with a characteristic opposite branching pattern. Seed cones are globose and woody and bear four equal and decussate scales with prominent umbos. Seeds bear large, equal, semicircular wings. The fossil cedar appears most closely related to extant Cupressaceae such as Thuja, Chamaecyparis, and Heyderia. Foliage closely resembles that of Thuja, while cones are most similar to those of Chamaecyparis. The fossil differs sufficiently in foliage and seed cone structure to preclude assignment to an extant genus and is here assigned to Mesocyparis borealis gen. et sp. nov. Similarities among such extant genera as Thuja, Chamaecyparis, Heyderia, and Thujopsis and the fossil Mesocyparis borealis suggest that all may belong to a single natural group. Furthermore, this group may be more closely related to the southern hemispheric genera Libocedrus, Papuacedrus, and Austrocedrus than present classification schemes imply. Our examination of the Cupressaceae indicates that a revision of present systems of classification is required to accommodate evidence from both extant and extinct cedars.


1994 ◽  
Vol 345 ◽  
Author(s):  
J. A. Greer ◽  
H. J. Van Hook ◽  
M. D. Tabat ◽  
H. Q. Nguyen ◽  
G. Gammie ◽  
...  

AbstractHigh luminance (brightness) thin-film phosphor materials have potential use in a variety of applications including heads-up, helmet-mounted, and electroluminescent displays, as well as in emerging flat-panel displays based on field emitter technology. Phosphor materials in thin film form offer several advantages over conventional powder phosphor screens. Since the film is nearly fully dense and in intimate contact with the underlying substrate, thin film phosphors transfer heat to the face plate much quicker than conventional, more porous, powder phosphor materials. This allows thin film phosphor screens to be driven at higher power levels, and therefore produce higher luminance, assuming the efficiency of the powder and film are the same. Fully dense phosphor films have smaller surface area, and will outgas less than conventional powder phosphor materials. Thin film phosphors have smaller grain sizes than conventional powder phosphor materials which will provide for smaller spot size, and thus, higher resolution. Furthermore, in applications such as field-emitter displays, powder phosphor particles can be physically dislodged from the screen due to the high electric fields produced by the large potential difference between the anode screen and gate electrode (or cathode), or dislodged by arcing which may occur if a powder particle protrudes significantly above the screen surface. Dislodged particles or damage produced by arcing could degrade display performance. Dense, thin-film phosphor materials which are well adhered to transparent substrates will provide much smoother surface morphologies, and should be able to withstand significantly higher electric field strength without arcing or screen degradation due to the dislocation of particles.


2012 ◽  
Vol 262 ◽  
pp. 263-268
Author(s):  
Zhan Jun Si ◽  
Jia Wang ◽  
Chong Gu

In recent years, screen soft proofing has matured with the development of color management and display technology, and it has become the direction of printing development and the key of promotion. This article aimed at raising a testing scheme of display performance and adjusting scheme of corresponding display parameters, on this account to test the professional display’s performance, adjust display parameters and make color management. At the same time with reflecting the actual situation of display, a stable and accurate color reproduction environment was provided for screen soft proofing. After that, evaluations were carried out to evaluate printing quality of screen soft proofing on the condition that display’s performance was good, consequently the differences between proofing effects and final printing were studied. The result shows that this testing scheme of display performance can reflect the truth of display which is tested in this paper, the display after adjusted and color management according to this scheme shows good effect in the ability of screen analog proofing original, it can approach the requirements of the printing proofing.


2010 ◽  
Author(s):  
Shin-ichi Uehara ◽  
Hiroyasu Ujike ◽  
Goro Hamagishi ◽  
Kazuki Taira ◽  
Takafumi Koike ◽  
...  

Author(s):  
Anshari Akbar ◽  
Dwiyanto ◽  
A. A. Pramudita ◽  
Eriko N. Nasser ◽  
Rizki Permala
Keyword(s):  

Processes ◽  
2018 ◽  
Vol 6 (8) ◽  
pp. 108 ◽  
Author(s):  
Gitae Moon ◽  
Wonjun Jang ◽  
Intae Son ◽  
Hyun Cho ◽  
Yong Park ◽  
...  

Indium tin oxide (ITO) transparent electrodes are troubled with high cost and poor mechanical stability. In this study, layer-by-layer (LBL)-processed thin films with single-walled carbon nanotubes (SWNTs) exhibited high transparency and electrical conductivity as a candidate for ITO replacement. The repetitive deposition of polycations and stabilized SWNTs with a negative surfactant exhibits sufficiently linear film growth and high optoelectronic performance to be used as transparent electrodes for vertically aligned (VA) liquid crystal display (LCD) cells. The LC molecules were uniformly aligned on the all of the prepared LBL electrodes. VA LCD cells with SWNT LBL electrodes exhibited voltage-transmittance (V-T) characteristics similar to those with the conventional ITO electrodes. Although the response speeds were slower than the LCD cell with the ITO electrode, as the SWNT layers increased, the display performance was closer to the LCD cells with conventional ITO electrode. This work demonstrated the good optoelectronic performance and alignment compatibility with LC molecules of the SWNT LBL assemblies, which are potential alternatives to ITO films as transparent electrodes for LCDs.


1888 ◽  
Vol 5 (12) ◽  
pp. 574-574
Author(s):  
W. S. Gresley
Keyword(s):  

1993 ◽  
Vol 159 (1) ◽  
pp. 153-162 ◽  
Author(s):  
S.A. Berman ◽  
D. Moss ◽  
S. Bursztajn

Sign in / Sign up

Export Citation Format

Share Document