scholarly journals Combustion stability of dual fuel engine powered by diesel-ethanol fuels

2019 ◽  
Vol 178 (3) ◽  
pp. 155-161
Author(s):  
Łukasz NOWAK ◽  
Wojciech TUTAK
Keyword(s):  
Diesel Fuel ◽  
Combustion Process ◽  
Combustion Stability ◽  
Dual Fuel ◽  
Probability Density Distribution ◽  
Maximum Pressure ◽  
Operational Parameters ◽  
Compression Ignition Engine ◽  
Energy Fraction ◽  
The Stability

The paper presents result of combustion stability assessment of dual fuel engine. The authors analyzed results of co-combustion of diesel fuel with alcohol in terms of combustion stability. The comparative analysis of both the operational parameters of the engine and the IMEP, as the parameters determining the stability of the combustion process, were carried out. It was analyzed, among others values of the COVIMEP coefficient, the spread of the maximum pressure value, the angle of the position of maximum pressure and the probability density distribution of the IMEP. The experimental investigation was conducted on 1-cylinder air cooled compression ignition engine. The test engine operated with constant rpm equal to 1500 rpm and constant angle of start of diesel fuel injection. The engine was operat-ed with ethanol up to 50% of its energy fraction. The influence of ethanol on ignition delay time spread and end of combustion process was evaluated. It turns out that the share of ethanol does not adversely affect the stability of ignition..

scholarly journals Comparative Analysis of Combustion Stability of Diesel/Ethanol Utilization by Blend and Dual Fuel

Processes ◽  
2019 ◽  
Vol 7 (12) ◽  
pp. 946 ◽  
Author(s):  
Wojciech Tutak ◽  
Arkadiusz Jamrozik
Keyword(s):  
Diesel Fuel ◽  
Fuel Injection ◽  
Combustion Process ◽  
Combustion Stability ◽  
Dual Fuel ◽  
Maximum Pressure ◽  
Compression Ignition Engine ◽  
Energy Fraction ◽  
Pure Ethanol ◽  
Advantages And Disadvantages

The aim of the work is a comparison of two combustion systems of fuels with different reactivity. The first is combustion of the fuel mixture and the second is combustion in a dual-fuel engine. Diesel fuel was burned with pure ethanol. Both methods of co-firing fuels have both advantages and disadvantages. Attention was paid to the combustion stability aspect determined by COVIMEP as well as the probability density function of IMEP. It was analyzed also the spread of the maximum pressure value, the angle of the position of maximum pressure. The influence of ethanol on ignition delay time spread and end of combustion process was evaluated. The experimental investigation was conducted on 1-cylinder air cooled compression ignition engine. The test engine operated with constant rpm equal to 1500 rpm and constant angle of start of diesel fuel injection. The engine was operated with ethanol up to 50% of its energy fraction.

scholarly journals Influence of Gasoline Addition on Biodiesel Combustion in a Compression-Ignition Engine with Constant Settings

Processes ◽  
2020 ◽  
Vol 8 (11) ◽  
pp. 1499
Author(s):  
Wojciech Tutak ◽  
Arkadiusz Jamrozik
Keyword(s):  
Diesel Fuel ◽  
Ignition Delay ◽  
Combustion Process ◽  
Gasoline Fraction ◽  
Combustion Stability ◽  
Dual Fuel ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Combustion Duration ◽  
Fuel Technology

This paper presents results of investigation of co-combustion process of biodiesel with gasoline, in form of mixture and using dual fuel technology. The main objective of this work was to show differences in both combustion systems of the engine powered by fuels of different reactivity. This paper presents parameters of the engine and the assessment of combustion stability. It turns out that combustion process of biodiesel was characterized by lower ignition delay compared to diesel fuel combustion. For 0.54 of gasoline energetic fraction, the ignition delay increased by 25% compared to the combustion of the pure biodiesel, but for dual fuel technology for 0.95 of gasoline fraction it was decreased by 85%. For dual fuel technology with the increase in gasoline fraction, the specific fuel consumption (SFC) was decreased for all analyzed fractions of gasoline. In the case of blend combustion, the SFC was increased in comparison to dual fuel technology. An analysis of spread of ignition delay and combustion duration was also presented. The study confirmed that it is possible to co-combust biodiesel with gasoline in a relatively high energetic fraction. For the blend, the ignition delay was up to 0.54 and for dual fuel it was near to 0.95.

scholarly journals An Experimental Study on the Performance and Emission of the diesel/CNG Dual-Fuel Combustion Mode in a Stationary CI Engine

Energies ◽  
2019 ◽  
Vol 12 (20) ◽  
pp. 3857 ◽  
Author(s):  
Arkadiusz Jamrozik ◽  
Wojciech Tutak ◽  
Karol Grab-Rogaliński
Keyword(s):  
Diesel Fuel ◽  
Carbon Dioxide Emissions ◽  
Combustion Engine ◽  
Combustion Process ◽  
Pressure Rise ◽  
Dual Fuel ◽  
Maximum Pressure ◽  
Stable Operation ◽  
Performance And Emission ◽  
Ci Engine

One of the possibilities to reduce diesel fuel consumption and at the same time reduce the emission of diesel engines, is the use of alternative gaseous fuels, so far most commonly used to power spark ignition engines. The presented work concerns experimental research of a dual-fuel compression-ignition (CI) engine in which diesel fuel was co-combusted with CNG (compressed natural gas). The energy share of CNG gas was varied from 0% to 95%. The study showed that increasing the share of CNG co-combusted with diesel in the CI engine increases the ignition delay of the combustible mixture and shortens the overall duration of combustion. For CNG gas shares from 0% to 45%, due to the intensification of the combustion process, it causes an increase in the maximum pressure in the cylinder, an increase in the rate of heat release and an increase in pressure rise rate. The most stable operation, similar to a conventional engine, was characterized by a diesel co-combustion engine with 30% and 45% shares of CNG gas. Increasing the CNG share from 0% to 90% increases the nitric oxide emissions of a dual-fuel engine. Compared to diesel fuel supply, co-combustion of this fuel with 30% and 45% CNG energy shares contributes to the reduction of hydrocarbon (HC) emissions, which increases after exceeding these values. Increasing the share of CNG gas co-combusted with diesel fuel, compared to the combustion of diesel fuel, reduces carbon dioxide emissions, and almost completely reduces carbon monoxide in the exhaust gas of a dual-fuel engine.

scholarly journals Analysis of the uniqueness of the combustion process of the Perkins 1104D-E44TA engine in dual-fuel operation powered by natural gas and diesel fuel

2019 ◽  
Vol 177 (2) ◽  
pp. 156-164
Author(s):  
Dariusz KURCZYŃSKI ◽  
Michał WARIANEK ◽  
Piotr ŁAGOWSKI
Keyword(s):  
Diesel Fuel ◽  
Combustion Process ◽  
Injection System ◽  
Dual Fuel ◽  
Maximum Pressure ◽  
Operating Cycle ◽  
Indicator Diagram ◽  
Common Rail Injection System ◽  
Common Rail Injection ◽  
The Impact

The paper presents the results of the research on the uniqueness of the combustion process in the Perkins 1104D-E44TA engine already equipped with a Common Rail injection system, and then adapted on an engine test stand to dual-fuel operation. The result of the combustion process is an indicator diagram. The combustion process in the cylinder of the tested engine was evaluated by determining the uniqueness indicators of subsequent operating cycles, such as: the uniqueness indicator for the maximum pressure of the operating cycle, the uniqueness indicator for the mean indicated pressure, the uniqueness indicator for the indicated diagram and the uniqueness indicator for the partial indicator diagram. The conducted tests and the analysis of the results showed the impact of dual-fuel power supply of the tested engine on the combustion process, as compared to supplying the engine only with diesel fuel, for which it has been optimized.

scholarly journals The Combustion and Emissions Performance of a Syngas-Diesel Dual Fuel Compression Ignition Engine

2016 ◽  
Author(s):  
Hongsheng Guo ◽  
W. Stuart Neill ◽  
Brian Liko
Keyword(s):  
Diesel Fuel ◽  
Combustion Engine ◽  
Direct Injection ◽  
Combustion Stability ◽  
Pollutant Emissions ◽  
Dual Fuel ◽  
Remote Communities ◽  
Inert Component ◽  
Compression Ignition Engine ◽  
Renewable Biomass

Remote communities in Canada heavily rely on reciprocating diesel generators for heat and power generation. These engines utilize diesel fuel that is imported at great expense and generate green-house gas (GHG) and pollutant emissions. Replacing diesel fuel in these engines by syngas derived from a thermo-chemical treatment of local renewable biomass can not only lower the fuel cost but also reduce GHG and pollutant emissions for remote communities. Besides, syngas-diesel dual fuel combustion can maintain the ability to revert back to diesel operation and therefore ensure reliable heat and power supply when syngas is not available. In this study, the combustion and emissions performance of a syngas-diesel dual fuel engine was investigated at low and medium loads. A single cylinder direct injection diesel engine was modified to operate using a dual fuel strategy. The diesel fuel was directly injected to the cylinder, while syngas was injected into the intake port. The effects of syngas fraction and composition on energy efficiency, cylinder pressure, exhaust temperature, and combustion stability were recorded and analyzed. The emissions data, including PM, NOx, CO, and unburned hydrocarbon, were also analyzed and reported in the paper. The results suggest that the substitution of diesel by a syngas caused a slight decrease in brake thermal efficiency and an increase in CO emissions. The effect of a syngas on soot emissions depended on the composition and/or quality. The inert component content of a syngas significantly affected NOx emissions in a syngas-diesel dual fuel internal combustion engine.

scholarly journals Combustion Stability, Performance and Emission Characteristics of a CI Engine Fueled with Diesel/n-Butanol Blends

Energies ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2817
Author(s):  
Arkadiusz Jamrozik ◽  
Wojciech Tutak ◽  
Karol Grab-Rogaliński
Keyword(s):  
Alternative Fuels ◽  
Specific Energy Consumption ◽  
Combustion Process ◽  
Combustion Stability ◽  
Dual Fuel ◽  
Initial Increase ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Engine Operation ◽  
Energy Share

The development of compression ignition engines depends mainly on using alternative fuels, such as alcohols. The paper presents the results of tests of a stationary compression ignition engine fueled with mixtures of diesel oil and n-butanol with an energy share from 0 to 60%. The combustion and emission results of a dual-fuel engine were compared to a conventional diesel-only engine. As part of the work, the combustion process, including changes in pressure and heat release rate, as well as exhaust emissions from the test engine, were investigated. The main operational parameters of the engine were determined, including mean indicated pressure, thermal efficiency and specific energy consumption. Moreover, the stability of the engine operation was analyzed. The research shows that the 60% addition of n-butanol to diesel fuel increases the ignition delay (by 39%) and shortens the combustion duration (by 57%). In addition, up to 40%, it results in increased pmax, HRRmax and PPRmax. The engine was characterized by the highest efficiency, equal to 41.35% when operating on DB40. In the whole range of alcohol content, the dual-fuel engine was stable. With the increase of n-butanol content to 40%, the emission of NOx increased. The lowest concentration of CO was obtained during the combustion of DB50. After the initial increase (for DB20), the THC emission was reduced to the lowest value for DB40. Increasing the energy share of alcohol to 60% resulted in a significant, more than 43 times, reduction in soot emissions.

scholarly journals Research on the effect of diesel fuel injection parameters on the exhaust emissions in the turbocharged CI engine operating on propane

2019 ◽  
Vol 177 (2) ◽  
pp. 180-186
Author(s):  
Sławomir LUFT ◽  
Tomasz SKRZEK
Keyword(s):  
Diesel Fuel ◽  
High Efficiency ◽  
Fuel Injection ◽  
Combustion Process ◽  
Dual Fuel ◽  
Compression Ignition Engine ◽  
Injection Parameters ◽  
Study Results ◽  
Wide Range ◽  
Ci Engine

The article presents results of the studies on the charged, dual-fuel CI compression ignition engine fuelled with propane. The main goal of the studies was to fuel the engine so that the amount of energy provided with propane is possibly highest at the high efficiency, low emission of harmful exhaust constituents and proper combustion. As the studies conducted so far have shown, with the increase of energy from propane we observe crucial changes in the combustion process. As these changes may be a barrier in the further increase of energy, we decided to change the injection parameters of the diesel fuel. The changes introduced allowed for the 70% energetic contribution of gas fuel at the subsequent elimination of unfavourable phenomena. The fuel injection was realized divided into two doses. Both proportions and angle at the beginning of the injection for both doses were variable. The angle at the beginning of injection for the first dose was changed in a wide range and depended on the value of charging pressure. The angle at the beginning of injection for the second dose was changed in a much narrower range, mainly due to very clear changes in the nature of combustion process. The studies have been conducted for three values of charging pressure, namely 200; 400 and 600 [mbar], and also for the naturally aspirated version. Study results have been presented in a form of regulation characteristics for the angle of the beginning of injection of the pilot dose for the chosen charging variants, as well as volume and angle of the beginning of injection for the main dose. The obtained results show that the content of exhaust constituents for the dual-fuel CI engine depends highly on assumed regulations of injection parameters of the fuel dose initiating the ignition, as well as engine charging pressure.

scholarly journals Comparative Analysis of the Combustion Stability of Diesel-Methanol and Diesel-Ethanol in a Dual Fuel Engine

Energies ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 971 ◽  
Author(s):  
Arkadiusz Jamrozik ◽  
Wojciech Tutak ◽  
Renata Gnatowska ◽  
Łukasz Nowak
Keyword(s):  
Diesel Fuel ◽  
Ignition Delay ◽  
Combustion Process ◽  
Combustion Stability ◽  
Dual Fuel ◽  
Effective Pressure ◽  
Engine Operation ◽  
Indicated Mean Effective Pressure ◽  
Alcohol Fuel ◽  
Alcohol Fuels

The co-combustion of diesel with alcohol fuels in a compression ignition dual fuel engine is one of the ways of using alternative fuels to power combustion engines. Scientific explorations in this respect should not only concern the combustion process in one engine cycle, which is most often not representative for a longer engine life, but should also include an analysis of multiple cycles, which would allow for indicating reliable parameters of engine operation and its stability. This paper presents experimental examinations of a CI engine with a dual fuel system, in which co-combustion was performed for diesel and two alcohol fuels (methanol and ethanol) with energy contents of 20%, 30%, 40% and 50%. The research included the analysis of the combustion process and the analysis of cycle-by-cycle variation of the 200 subsequent engine operation cycles. It was shown that the presence and increase in the share of methanol and ethanol used for co-combustion with diesel fuel causes an increase in ignition delay and increases the heat release rate and maximum combustion pressure values. A larger ignition delay is observed for co-combustion with methanol. Based on changes in the coefficient of variation of the indicated mean effective pressure (COVIMEP) and the function of probability density of the indicated mean effective pressure (f(IMEP)), prepared for a series of engine operation cycles, it can be stated that the increase in the percentage of alcohol fuel used for co-combustion with diesel fuel does not impair combustion stability. For the highest percentage of alcohol fuel (50%), the co-combustion of diesel with methanol shows a better stability.

An experimental investigation of the performance, emission and combustion stability of compression ignition engine powered by diesel and ammonia solution (NH4OH)

2020 ◽  
pp. 146808742094094
Author(s):  
Michał Pyrc ◽  
Michał Gruca ◽  
Arkadiusz Jamrozik ◽  
Wojciech Tutak ◽  
Romualdas Juknelevičius
Keyword(s):  
Diesel Fuel ◽  
Carbon Dioxide Emissions ◽  
Ammonia Solution ◽  
Operating Conditions ◽  
Combustion Stability ◽  
Dual Fuel ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Engine Operation ◽  
Test Engine

This study presents experimental examinations of a stationary single-cylinder compression ignition dual fuel engine for the combustion of diesel fuel with water ammonia solution. The effect of 25% water ammonia solution on the combustion, performance, emissions and stability of the dual fuel compression ignition engine was investigated, taking into account its different operating conditions. The experiments were carried out for three modes of engine operation with three loads (35%, 60% and 100%) and a change in the water ammonia solution energy fraction at 60% load, within the range from 0% to 17%. Co-combustion of diesel fuel with water ammonia solution in the test engine contributed to an increase in the ignition delay period and combustion duration, and to an increase in the heat release rate. Compared to the combustion of diesel fuel alone, combustion involving ammonia causes deterioration in the stability of the test engine operation, yet not exceeding the permissible stability indices for reciprocating combustion engines. Addition of water ammonia solution led to reduced nitrogen oxide emissions and increasing carbon monoxide and hydrocarbon emissions and did not result in significant changes in carbon dioxide emissions.

scholarly journals The Effect of RME-1-Butanol Blends on Combustion, Performance and Emission of a Direct Injection Diesel Engine

Energies ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2941
Author(s):  
Wojciech Tutak ◽  
Arkadiusz Jamrozik ◽  
Karol Grab-Rogaliński
Keyword(s):  
Diesel Engine ◽  
Heat Release ◽  
Direct Injection ◽  
Specific Energy Consumption ◽  
Combustion Process ◽  
Constant Load ◽  
Combustion Stability ◽  
Performance And Emission ◽  
Energy Share ◽  
The Stability

The main objective of this study was assessment of the performance, emissions and combustion characteristics of a diesel engine using RME–1-butanol blends. In assessing the combustion process, great importance was placed on evaluating the stability of this process. Not only were the typical COVIMEP indicators assessed, but also the non-burnability of the characteristic combustion stages: ignition delay, time of 50% heat release and the end of combustion. The evaluation of the combustion process based on the analysis of heat release. The tests carried out on a 1-cylinder diesel engine operating at a constant load. Research and evaluation of the combustion process of a mixture of RME and 1-butanol carried out for the entire range of shares of both fuels up to 90% of 1-butanol energetic fraction. The participation of butanol in combustion process with RME increased the in-cylinder peak pressure and the heat release rate. With the increase in the share of butanol there was noted a decrease in specific energy consumption and an increase in engine efficiency. The share of butanol improved the combustion stability. There was also an increase in NOx emissions and decrease in CO and soot emissions. The engine can be power by blend up to 80% energy share of butanol.

Sign in / Sign up

Export Citation Format

Share Document