scholarly journals INDOOR LOCALIZATION USING ACCELEROMETER AND GYROSCOPE SMARTPHONE BASED

2021 ◽  
Vol 2 (2) ◽  
pp. 119-126
Author(s):  
Anggreini Intan Permata Sari ◽  
Arkham Zahri Rakhman
Keyword(s):  
Error Rate ◽  
Indoor Localization ◽  
Dead Reckoning ◽  
Initial Position ◽  
Sensor System ◽  
System Testing ◽  
Accelerometer Sensor ◽  
Campus Environment ◽  
Gyroscope Sensor ◽  
Pedestrian Dead Reckoning

Indoor localization is one of the more accurate technologies to be used to determine indoors or buildings. Pedestrian Dead Reckoning (PDR) is a method of determining the user's position by adding a method that occurs to a known initial position. The displacement that occurs is estimated with the help of an accelerometer sensor attached to the user as a step detector and to determine the direction towards the user using a gyroscope sensor. System testing is carried out in the Institut Teknologi Sumatera’s campus environment on the 2nd floor of Building C and D. The results from the detection of steps get an error rate of 1.13% using a threshold of 0.8.

Rancang Bangun Smart Case Sistem Monitoring Tabung Gas Elpiji Berbasis Mikrokontroler

CHIPSET ◽  
2020 ◽  
Vol 1 (02) ◽  
pp. 61-68
Author(s):  
Anisha Fadia Haya ◽  
Werman kasoep ◽  
Nefy Puteri Novani
Keyword(s):  
Error Rate ◽  
Load Cell ◽  
Sensor System ◽  
System Testing ◽  
A Value ◽  
Gas Leak ◽  
Weight Value ◽  
Gas Cylinders ◽  
Sms Notification ◽  
Module System

This study aims to create a system that can monitor gas cylinders where this device consists of two systems, the first is a system to measure the weight of 3kg LPG gas cylinders to find the remaining gas which will then be displayed on the LCD, and the second the system gives a notification (alarm) if there is a gas leak via SMS. This system consists of Arduino UNO Microcontroller components, Load cell Sensor, MQ-6 Sensor, and SIM800L GSM Module. For overall system testing, the load cell sensor system can display a percentage of the weight value obtained an error rate of 0%, this indicates that the formula used in the program runs according to what is desired. In the MQ-6 sensor system can make the buzzer on at a value >= 700 ppm, the results of the buzzer can live when the detected gas value >= 700 ppm, this is as desired. In the sim800L gsm module system can send leak notifications, the results obtained that the module can send SMS notifications. And the system turns on the buzzer when the LPG gas has reached the minimum limit, the results obtained by the buzzer will sound when the remaining gas value <= 16%. Based on tests conducted on this system the system can measure the desired weight of the cylinder to look for the remaining gas in the form of a percentage and detect a gas leak and then send an SMS notification.

scholarly journals A Loose-Coupled Fusion of Inertial and UWB Assisted by a Decision-Making Algorithm for Localization of Emergency Responders

Electronics ◽  
2019 ◽  
Vol 8 (12) ◽  
pp. 1463 ◽  
Author(s):  
André G. Ferreira ◽  
Duarte Fernandes ◽  
André P. Catarino ◽  
Ana M. Rocha ◽  
João L. Monteiro
Keyword(s):  
Decision Making ◽  
Indoor Localization ◽  
Dead Reckoning ◽  
Time Of Arrival ◽  
Robust Solution ◽  
Localization Accuracy ◽  
Positioning Systems ◽  
Emergency Responders ◽  
Pedestrian Dead Reckoning ◽  
Non Line Of Sight

Combining different technologies is gaining significant popularity among researchers and industry for the development of indoor positioning systems (IPSs). These hybrid IPSs emerge as a robust solution for indoor localization as the drawbacks of each technology can be mitigated or even eliminated by using complementary technologies. However, fusing position estimates from different technologies is still very challenging and, therefore, a hot research topic. In this work, we pose fusing the ultrawideband (UWB) position estimates with the estimates provided by a pedestrian dead reckoning (PDR) by using a Kalman filter. To improve the IPS accuracy, a decision-making algorithm was developed that aims to assess the usability of UWB measurements based on the identification of non-line-of-sight (NLOS) conditions. Three different data fusion algorithms are tested, based on three different time-of-arrival positioning algorithms, and experimental results show a localization accuracy of below 1.5 m for a 99th percentile.

scholarly journals iPAC: Integrate Pedestrian Dead Reckoning and Computer Vision for Indoor Localization and Tracking

IEEE Access ◽  
2019 ◽  
Vol 7 ◽  
pp. 183514-183523 ◽  
Author(s):  
Danyang Li ◽  
Yumeng Lu ◽  
Jingao Xu ◽  
Qiang Ma ◽  
Zhuo Liu
Keyword(s):  
Computer Vision ◽  
Indoor Localization ◽  
Dead Reckoning ◽  
Localization And Tracking ◽  
Pedestrian Dead Reckoning

PDR-Aided Algorithm with WiFi Fingerprint Matching for Indoor Localization

2014 ◽  
Vol 701-702 ◽  
pp. 989-993
Author(s):  
Wen Bin Yu ◽  
Peng Li ◽  
Zhi Chen ◽  
Chang Li
Keyword(s):  
Social Network ◽  
Indoor Localization ◽  
Dead Reckoning ◽  
Location Based Services ◽  
Fingerprint Matching ◽  
Network Applications ◽  
Wireless Signal ◽  
Signal Fluctuation ◽  
Pedestrian Dead Reckoning ◽  
Wifi Fingerprint

Recently, indoor localization is essential to enable location-based services for many mobile and social network applications. Due to fluctuation of the wireless signal, the accuracy of a simple WiFi fingerprint-based localization is not high. In this paper, we first exploit Pedestrian Dead Reckoning (PDR) technology to overcome the problem of the wireless signal fluctuation, then propose a PDR-aided algorithm with WiFi fingerprint matching for indoor localization, which using the PDR technology aided indoor localization. Experiments show that our algorithm has better accuracy than other indoor localization methods.

scholarly journals Smartphone-Based Pedestrian Dead Reckoning for 3D Indoor Positioning

Sensors ◽  
2021 ◽  
Vol 21 (24) ◽  
pp. 8180
Author(s):  
Jijun Geng ◽  
Linyuan Xia ◽  
Jingchao Xia ◽  
Qianxia Li ◽  
Hongyu Zhu ◽  
...  
Keyword(s):  
Kalman Filter ◽  
Indoor Localization ◽  
Dead Reckoning ◽  
Step Length ◽  
Indoor Positioning ◽  
Actual Measurement ◽  
Location Service ◽  
Cubature Kalman Filter ◽  
Robust Adaptive ◽  
Pedestrian Dead Reckoning

Indoor localization based on pedestrian dead reckoning (PDR) is drawing more and more attention of researchers in location-based services (LBS). The demand for indoor localization has grown rapidly using a smartphone. This paper proposes a 3D indoor positioning method based on the micro-electro-mechanical systems (MEMS) sensors of the smartphone. A quaternion-based robust adaptive cubature Kalman filter (RACKF) algorithm is proposed to estimate the heading of pedestrians based on magnetic, angular rate, and gravity (MARG) sensors. Then, the pedestrian behavior patterns are distinguished by detecting the changes of pitch angle, total accelerometer and barometer values of the smartphone in the duration of effective step frequency. According to the geometric information of the building stairs, the step length of pedestrians and the height difference of each step can be obtained when pedestrians go up and downstairs. Combined with the differential barometric altimetry method, the optimal height can be computed by the robust adaptive Kalman filter (RAKF) algorithm. Moreover, the heading and step length of each step are optimized by the Kalman filter to reduce positioning error. In addition, based on the indoor map vector information, this paper proposes a heading calculation strategy of the 16-wind rose map to improve the pedestrian positioning accuracy and reduce the accumulation error. Pedestrian plane coordinates can be solved based on the Pedestrian Dead-Reckoning (PDR). Finally, combining pedestrian plane coordinates and height, the three-dimensional positioning coordinates of indoor pedestrians are obtained. The proposed algorithm is verified by actual measurement examples. The experimental verification was carried out in a multi-story indoor environment. The results show that the Root Mean Squared Error (RMSE) of location errors is 1.04–1.65 m by using the proposed algorithm for three participants. Furthermore, the RMSE of height estimation errors is 0.17–0.27 m for three participants, which meets the demand of personal intelligent user terminal for location service. Moreover, the height parameter enables users to perceive the floor information.

scholarly journals Tightly Coupling Fusion of UWB Ranging and IMU Pedestrian Dead Reckoning for Indoor Localization

IEEE Access ◽  
2021 ◽  
pp. 1-1
Author(s):  
Rashid Ali ◽  
Ran Liu ◽  
Anand Nayyar ◽  
Basit Qureshi ◽  
Zhiqiang Cao
Keyword(s):  
Indoor Localization ◽  
Dead Reckoning ◽  
Pedestrian Dead Reckoning

scholarly journals Off-Site Indoor Localization Competitions Based on Measured Data in a Warehouse

Sensors ◽  
2019 ◽  
Vol 19 (4) ◽  
pp. 763 ◽  
Author(s):  
Ryosuke Ichikari ◽  
Katsuhiko Kaji ◽  
Ryo Shimomura ◽  
Masakatsu Kourogi ◽  
Takashi Okuma ◽  
...  
Keyword(s):  
Test Data ◽  
Indoor Localization ◽  
Dead Reckoning ◽  
Measured Data ◽  
Practical Performance ◽  
Testing Environments ◽  
The Many ◽  
Warehouse Operations ◽  
Pedestrian Dead Reckoning ◽  
Unique Capability

The performance of indoor localization methods is highly dependent on the situations in which they are used. Various competitions on indoor localization have been held for fairly comparing the existing indoor localization methods in shared and controlled testing environments. However, it is difficult to evaluate the practical performance in industrial scenarios through the existing competitions. This paper introduces two indoor localization competitions, which are named the “PDR Challenge in Warehouse Picking 2017” and “xDR Challenge for Warehouse Operations 2018” for tracking workers and vehicles in a warehouse scenario. For the PDR Challenge in Warehouse Picking 2017, we conducted a unique competition based on the data measured during the actual picking operation in an actual warehouse. We term the dead-reckoning of a vehicle as vehicle dead-reckoning (VDR), and the term “xDR” is derived from pedestrian dead-reckoning (PDR) plus VDR. As a sequel competition of the PDR Challenge in Warehouse Picking 2017, the xDR Challenge for Warehouse Operations 2018 was conducted as the world’s first competition that deals with tracking forklifts by VDR with smartphones. In the paper, first, we briefly summarize the existing competitions, and clarify the characteristics of our competitions by comparing them with other competitions. Our competitions have the unique capability of evaluating the practical performance in a warehouse by using the actual measured data as the test data and applying multi-faceted evaluation metrics. As a result, we successfully organize the competitions due to the many participants from many countries. As a conclusion of the paper, we summarize the findings of the competitions.

scholarly journals Pedestrian Stride-Length Estimation Based on LSTM and Denoising Autoencoders

Sensors ◽  
2019 ◽  
Vol 19 (4) ◽  
pp. 840 ◽  
Author(s):  
Qu Wang ◽  
Langlang Ye ◽  
Haiyong Luo ◽  
Aidong Men ◽  
Fang Zhao ◽  
...  
Keyword(s):  
Error Rate ◽  
Stride Length ◽  
Inertial Sensor ◽  
Dead Reckoning ◽  
Training Data ◽  
Sensor Data ◽  
Walking Distance ◽  
Estimation Accuracy ◽  
Length Estimation ◽  
Pedestrian Dead Reckoning

Accurate stride-length estimation is a fundamental component in numerous applications, such as pedestrian dead reckoning, gait analysis, and human activity recognition. The existing stride-length estimation algorithms work relatively well in cases of walking a straight line at normal speed, but their error overgrows in complex scenes. Inaccurate walking-distance estimation leads to huge accumulative positioning errors of pedestrian dead reckoning. This paper proposes TapeLine, an adaptive stride-length estimation algorithm that automatically estimates a pedestrian’s stride-length and walking-distance using the low-cost inertial-sensor embedded in a smartphone. TapeLine consists of a Long Short-Term Memory module and Denoising Autoencoders that aim to sanitize the noise in raw inertial-sensor data. In addition to accelerometer and gyroscope readings during stride interval, extracted higher-level features based on excellent early studies were also fed to proposed network model for stride-length estimation. To train the model and evaluate its performance, we designed a platform to collect inertial-sensor measurements from a smartphone as training data, pedestrian step events, actual stride-length, and cumulative walking-distance from a foot-mounted inertial navigation system module as training labels at the same time. We conducted elaborate experiments to verify the performance of the proposed algorithm and compared it with the state-of-the-art SLE algorithms. The experimental results demonstrated that the proposed algorithm outperformed the existing methods and achieves good estimation accuracy, with a stride-length error rate of 4.63% and a walking-distance error rate of 1.43% using inertial-sensor embedded in smartphone without depending on any additional infrastructure or pre-collected database when a pedestrian is walking in both indoor and outdoor complex environments (stairs, spiral stairs, escalators and elevators) with natural motion patterns (fast walking, normal walking, slow walking, running, jumping).

Sign in / Sign up

Export Citation Format

Share Document