scholarly journals Plasmonic Refractive Index Sensor with High Figure of Merit Based on Concentric-Rings Resonator

Author(s):  
Zhaojian Zhang ◽  
Junbo Yang ◽  
Xin He ◽  
Jingjing Zhang ◽  
Jie Huang ◽  
...  

A plasmonic refractive index (RI) sensor based on metal-insulator-metal (MIM) waveguide coupled with concentric double rings resonator (CDRR) is proposed and investigated numerically. Utilizing the novel supermodes of the CDRR, the FWHM of the resonant wavelength can be modulated, and a sensitivity of 1060 nm/RIU with high figure of merit (FOM) 203.8 is realized in the near-infrared region. The unordinary modes as well as the influence of structure parameters on the sensing performance are also discussed. Such plasmonic sensor with simple framework and high optical resolution could be applied to on-chip sensing systems and integrated optical circuits. Besides, the special cases of bio- sensing and triple rings are also discussed.

Author(s):  
Zhaojian Zhang ◽  
Junbo Yang ◽  
Xin He ◽  
Jingjing Zhang ◽  
Jie Huang ◽  
...  

A plasmonic refractive index (RI) sensor based on metal-insulator-metal (MIM) waveguide coupled with concentric double rings resonator (CDRR) is proposed and investigated numerically. Utilizing the novel supermodes of the CDRR, the FWHM of the resonant wavelength can be modulated, and a sensitivity of 1060 nm/RIU with high figure of merit (FOM) 203.8 is realized in the near-infrared region. The unordinary modes as well as the influence of structure parameters on the sensing performance are also discussed. Such plasmonic sensor with simple framework and high optical resolution could be applied to on-chip sensing systems and integrated optical circuits.


2016 ◽  
Vol 24 (9) ◽  
pp. 9975 ◽  
Author(s):  
Lei Chen ◽  
Yumin Liu ◽  
Zhongyuan Yu ◽  
Dong Wu ◽  
Rui Ma ◽  
...  

2021 ◽  
Author(s):  
Ahmad Azuad Yaseer ◽  
Md. Farhad Hassan ◽  
Infiter Tathfif ◽  
Kazi Sharmeen Rashid ◽  
Rakibul Hasan Sagor

Abstract In this paper, a six cavity-based metal-insulator-metal plasmonic sensor is proposed. The designed sensor can detect six primary colors in the visible wavelength. Moreover, the proposed sensor can also sense the change in the refractive index. An initial sensitivity of 648.41 nm/RIU and figure of merit of (FOM) 141.29 are found based on the transmittance profile extracted through the two-dimensional (2D) finite element method (FEM). The structural parameters are optimized to maximize the performance of the modeled device both as a color filter and a refractive index sensor. The optimized FOM, FOM* and sensitivity are recorded as 218.80, 4.771 × 10⁴, and 865.31 nm/RIU, respectively. Due to high FOM and FOM*, this sensor is expected to be utilized as a color filter in various sectors, such as medical, industrial, and forensic, where the light of a particular wavelength is mandatory.


2021 ◽  
Author(s):  
Yuan-Fong Chou Chau

Abstract A multiple-mode metal-insulator-metal plasmonic sensor with four coupled bowtie resonators containing two pair of silver baffles is numerically investigated using the finite element method and verified by the temporal coupled-mode theory. The proposed structure can function as the plasmonic refractive index and glucose sensors working in visible and near-infrared wavelength range. Simulation results show that introducing the silver baffles in bowtie cavities can modify the plasmon resonance modes and give a tunable way to enhance the sensitivity and figure of merit. The highest sensitivity (S) can reach S=1500.00, 1400.00, and 1100.00 nm/RIU and the high figure of merit (FOM) of 50.00, 46.67, and 36.67 RIU-1 from mode 1 to mode 3. The sensitivity obtained from three modes with operating wavelengths in visible and near-infrared simultaneously exceeds 1100.00 nm/RIU along with remarkably high FOM, which are not attainable from other reported literature. The proposed structure can realize multi-mode and shows impressive practical prospects that can be applied for integrated optics circuits (IOCs) and other nanophotonics devices.


2016 ◽  
Vol 2016 ◽  
pp. 1-6 ◽  
Author(s):  
Said Mahajna ◽  
Michal Neumann ◽  
Ofer Eyal ◽  
Atef Shalabney

The TM and TE guided modes in the coupled plasmon-waveguide resonance configuration are investigated in the spectral domain. Here we use the modes dispersion to study their capability for sensing in the near infrared region. It is shown that the spectral widths of the guided modes are, at least, one order of magnitude smaller than the conventional surface plasmon resonance counterpart. The enhanced sensitivity and figure of merit of the guided modes reveal their potential for sensing in the spectral interrogation method where the traditional configurations are inherently limited. Moreover, the high resolution associated with the narrow resonances and the polarization dependence make these modes very promising for anisotropic biosensing in the spectral interrogation approach. The extremely high figure of merit, large penetration depth, and propagation distance in the near infrared region open the possibility of combining the plasmon-waveguide configuration with absorption spectroscopy techniques for molecular recognition.


2021 ◽  
Author(s):  
Moutusi De ◽  
Vinod Kumar Singh

Abstract In this article, an efficient high birefringent D-shaped photonic crystal fiber (HB-D-PCF) plasmonic refractive index sensor is reported. It is able to work over a long low refractive index (RI) analyte range from 1.29 to 1.36. This modified simple structured hexagonal PCF has high birefringence in the near-infrared region. A thin gold film protected by a titanium dioxide (TiO2) layer is deposited on the D-surface of the PCF which acts as surface plasmon active layer. The sensor consists of an analyte channel on the top of the fiber. The performance of the HB-D-PCF is analyzed based on finite element method (FEM). Both wavelength and amplitude interrogation techniques are applied to study the sensing performance of the optimized sensor. Numerical results show wavelength and amplitude sensitivity of 9245nm/RIU and 1312 RIU-1 respectively with high resolution. Owing to the high sensitivity, long range sensing ability as well as spectral stability the designed HB-D-PCF SPR sensor is a potential candidate for water pollution control, glucose concentration testing, biochemical analyte detection as well as portable device fabrication.


Nanomaterials ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 1399 ◽  
Author(s):  
Chung-Ting Chou Chao ◽  
Yuan-Fong Chou Chau ◽  
Hung Ji Huang ◽  
N. T. R. N. Kumara ◽  
Muhammad Raziq Rahimi Kooh ◽  
...  

We numerically and theoretically investigate a highly sensitive and tunable plasmonic refractive index sensor that is composed of a metal-insulator-metal waveguide with a side-coupled nanoring, containing silver nanorods using the finite element method. Results reveal that the presence of silver nanorods in the nanoring has a significant impact on sensitivity and tunability performance. It gives a flexible way to tune the system response in the proposed structure. Our designed sensor has a sensitivity of 2080 nm/RIU (RIU is the refractive index unit) along with a figure of merit and a quality factor of 29.92 and 29.67, respectively. The adequate refractive index sensitivity can increase by adding the silver nanorods in a nanoring, which can induce new surface plasmon polaritons (SPPs) modes that cannot be found by a regular nanoring. For a practical application, a valid introduction of silver nanorods in the nanoring can dramatically reduce the dimension of the proposed structure without sacrificing performance.


Sign in / Sign up

Export Citation Format

Share Document