An Image Encryption Algorithm Based on the Improved Sine-Tent Map

This paper makes use of the characteristics of initial sensitivity and randomness of the chaotic map to design an image encryption algorithm based on the sine map and the tent map. The sine map is used to improve the tent map; then, the improved sine-tent map is proposed. The traditional tent map proposed in this paper has an expanded control parameter range and better chaos. In this algorithm, bit rearrangement is adopted to further improve the improved sine-tent map, which can reconstruct the output value and expand the chaotic characteristics of the map. In this algorithm, the image parameters are connected with the algorithm to generate the key. In the encryption step, a method of replacing the most significant bit and scrambling-diffusion algorithm is designed to encrypt the plaintext image. Finally, the algorithm is simulated with the experiment and evaluated with analysis; then, the experimental results are given. The evaluation results show that the ciphertext of the algorithm has high randomness, strong robustness, and better resistance to differential attacks after comparison. The correlation of the ciphertext image pixels is very low, and the algorithm is highly secure as a conclusion.

Plasmonic Refractive Index Sensor Optimized for Color Detection

In this paper, a six cavity-based metal-insulator-metal plasmonic sensor is proposed. The designed sensor can detect six primary colors in the visible wavelength. Moreover, the proposed sensor can also sense the change in the refractive index. An initial sensitivity of 648.41 nm/RIU and figure of merit of (FOM) 141.29 are found based on the transmittance profile extracted through the two-dimensional (2D) finite element method (FEM). The structural parameters are optimized to maximize the performance of the modeled device both as a color filter and a refractive index sensor. The optimized FOM, FOM* and sensitivity are recorded as 218.80, 4.771 × 10⁴, and 865.31 nm/RIU, respectively. Due to high FOM and FOM*, this sensor is expected to be utilized as a color filter in various sectors, such as medical, industrial, and forensic, where the light of a particular wavelength is mandatory.

Motion Sickness Lessons from the Southern Ocean

BACKGROUND: The objectives were to assess the prevalence, severity, and medication taken, and to look for predictive factors in order to better identify characteristics of passengers at risk of motion sickness during transport from Hobart in Tasmania to the French polar stations in Antarctica. METHODS: There were 239 passengers who were surveyed over 4 yr with 4 round trips per year using the Motion Sickness Susceptibility Questionnaire (MSSQ), Simulator Sickness Questionnaire (SSQ), state-trait anxiety test (STAI-Trait and STAI-State), and general parameters (age, gender, number of trips, jet-lag, direction of the trip), medication, calculation of the distance of each passengers cabin to the center of gravity (CoG). RESULTS: While the passengers had a low intrinsic sensitivity to motion sickness (MSSQ), 94 reported at least one SSQ symptom of motion sickness, and 38 vomited. Five associated factors were discovered: greater initial sensitivity (MSSQ), anticipation of being ill, younger age, higher level of anxiety at midtrip, and greater distance from the CoG. Of the passengers, there were 54 who took anti-motion sickness medication at different times of the trip, however, these passengers experienced more nausea. This could be due to self-selection since they were more sensitive to motion sickness. CONCLUSION: We identified three predictive factors of motion sickness (greater intrinsic susceptibility, younger age, and greater cabin distance from the CoG). For preventive purposes, two associated factors of MS (anticipation of being ill, MSSQ score) were determined to classify three groups of risk of MS to improve passenger care during the trip. Besnard S, Bois J, Hitier M, Vogt J, Laforet P, Golding JF. Motion sickness lessons from the Southern Ocean. Aerosp Med Hum Perform. 2021; 92(9):720727.

Genetic Modulation of Initial Sensitivity to Δ9-Tetrahydrocannabinol (THC) Among the BXD Family of Mice

Cannabinoid receptor 1 activation by the major psychoactive component in cannabis, Δ9-tetrahydrocannabinol (THC), produces motor impairments, hypothermia, and analgesia upon acute exposure. In previous work, we demonstrated significant sex and strain differences in acute responses to THC following administration of a single dose (10 mg/kg, i.p.) in C57BL/6J (B6) and DBA/2J (D2) inbred mice. To determine the extent to which these differences are heritable, we quantified acute responses to a single dose of THC (10 mg/kg, i.p.) in males and females from 20 members of the BXD family of inbred strains derived by crossing and inbreeding B6 and D2 mice. Acute THC responses (initial sensitivity) were quantified as changes from baseline for: 1. spontaneous activity in the open field (mobility), 2. body temperature (hypothermia), and 3. tail withdrawal latency to a thermal stimulus (antinociception). Initial sensitivity to the immobilizing, hypothermic, and antinociceptive effects of THC varied substantially across the BXD family. Heritability was highest for mobility and hypothermia traits, indicating that segregating genetic variants modulate initial sensitivity to THC. We identified genomic loci and candidate genes, including Ndufs2, Scp2, Rps6kb1 or P70S6K, Pde4d, and Pten, that may control variation in THC initial sensitivity. We also detected strong correlations between initial responses to THC and legacy phenotypes related to intake or response to other drugs of abuse (cocaine, ethanol, and morphine). Our study demonstrates the feasibility of mapping genes and variants modulating THC responses in the BXDs to systematically define biological processes and liabilities associated with drug use and abuse.

Analytical Parameters of a Novel Glucose Biosensor Based on Grafted PFM as a Covalent Immobilization Technique

Bioanalytical methods, in particular electrochemical biosensors, are increasingly used in different industrial sectors due to their simplicity, low cost, and fast response. However, to be able to reliably use this type of device, it is necessary to undertake in-depth evaluation of their fundamental analytical parameters. In this work, analytical parameters of an amperometric biosensor based on covalent immobilization of glucose oxidase (GOx) were evaluated. GOx was immobilized using plasma-grafted pentafluorophenyl methacrylate (pgPFM) as an anchor onto a tailored HEMA-co-EGDA hydrogel that coats a titanium dioxide nanotubes array (TiO2NTAs). Finally, chitosan was used to protect the enzyme molecules. The biosensor offered outstanding analytical parameters: repeatability (RSD = 1.7%), reproducibility (RSD = 1.3%), accuracy (deviation = 4.8%), and robustness (RSD = 2.4%). In addition, the Ti/TiO2NTAs/ppHEMA-co-EGDA/pgPFM/GOx/Chitosan biosensor showed good long-term stability; after 20 days, it retained 89% of its initial sensitivity. Finally, glucose concentrations of different food samples were measured and compared using an official standard method (HPLC). Deviation was lower than 10% in all measured samples. Therefore, the developed biosensor can be considered to be a reliable analytical tool for quantification measurements.

Parallel Mixed Image Encryption and Extraction Algorithm Based on Compressed Sensing

In the actual image processing process, we often encounter mixed images that contain multiple valid messages. Such images not only need to be transmitted safely, but also need to be able to achieve effective separation at the receiving end. This paper designs a secure and efficient encryption and separation algorithm based on this kind of mixed image. Since chaotic system has the characteristics of initial sensitivity and pseudo-randomness, a chaos matrix is introduced into the compressed sensing framework. By using sequence signal to adjust the chaotic system, the key space can be greatly expanded. In the algorithm, we take the way of parallel transmission to block the data. This method can realize the efficient calculation of complex tasks in the image encryption system and improve the data processing speed. In the decryption part, the algorithm in this paper can not only realize the restoration of images, but also complete the effective separation of images through the improved restoration algorithm.

Genetic modulation of initial sensitivity to Δ9-tetrahydrocannabinol (THC) among the BXD family of mice

Cannabinoid receptor 1 activation by the major psychoactive component in cannabis, Δ9-tetrahydrocannabinol (THC), produces motor impairments, hypothermia, and analgesia upon acute exposure. In previous work, we demonstrated significant sex and strain differences in acute responses to THC following administration of a single dose (10 mg/kg, i.p.) in C57BL/6J (B6) and DBA/2J (D2) inbred mice. To determine the extent to which these differences are heritable, we quantified acute responses to a single dose of THC (10 mg/kg, i.p.) in males and females from 20 members of the BXD family of inbred strains derived by crossing and inbreeding B6 and D2 mice. Acute THC responses (initial sensitivity) were quantified as changes from baseline for: 1. spontaneous activity in the open field (mobility), 2. body temperature (hypothermia), and 3. tail withdrawal latency to a thermal stimulus (analgesia/antinociception). Initial sensitivity to the immobilizing, hypothermic, and antinociceptive effects of THC varied substantially across the BXD family. Heritability was highest for mobility and hypothermia traits, indicating that segregating genetic variants modulate initial sensitivity to THC. We identified genomic loci and candidate genes, including Ndufs2, Scp2, Rps6kb1 or P70S6K, Pde4d, and Pten, that may control variation in THC initial sensitivity. We also detected strong correlations between initial responses to THC and legacy phenotypes related to intake or response to other drugs of abuse (cocaine, ethanol, and morphine). Our study demonstrates the feasibility of mapping genes and variants modulating THC responses in the BXDs to systematically define biological processes and liabilities associated with drug use and abuse.

A Revised Point-to-Point Calibration Approach with Adaptive Errors Correction to Weaken Initial Sensitivity of Cuff-Less Blood Pressure Estimation

Initial calibration is a great challenge for cuff-less blood pressure (BP) measurement. The traditional one point-to-point (oPTP) calibration procedure only uses one sample/point to obtain unknown parameters of a specific model in a calm state. In fact, parameters such as pulse transit time (PTT) and BP still have slight fluctuations at rest for each subject. The conventional oPTP method had a strong sensitivity in the selection of initial value. Yet, the initial sensitivity of calibration has not been reported and investigated in cuff-less BP motoring. In this study, a mean point-to-point (mPTP) paring calibration method through averaging and balancing calm or peaceful states was proposed for the first time. Thus, based on mPTP, a factor point-to-point (fPTP) paring calibration method through introducing the penalty factor was further proposed to improve and optimize the performance of BP estimation. Using the oPTP, mPTP, and fPTP methods, a total of more than 100,000 heartbeat samples from 21 healthy subjects were tested and validated in the PTT-based BP monitoring technologies. The results showed that the mPTP and fPTP methods significantly improved the performance of estimating BP compared to the conventional oPTP method. Moreover, the mPTP and fPTP methods could be widely popularized and applied, especially the fPTP method, on estimating cuff-less diastolic blood pressure (DBP). To this extent, the fPTP method weakens the initial calibration sensitivity of cuff-less BP estimation and fills in the ambiguity for individualized calibration procedure.