scholarly journals Development of Crustal-Scale Shear Zones at the Singhbhum Craton–Eastern Ghats Belt Boundary Region: A Critical Review of the Mesoarchean–Neoproterozoic Odyssey

Lithosphere ◽  
2021 ◽  
Vol 2021 (Special 6) ◽  
Author(s):  
Gautam Ghosh ◽  
Proloy Ganguly ◽  
Shuvankar Karmakar ◽  
Sankar Bose ◽  
Joydip Mukhopadhyay ◽  
...  
Keyword(s):  
Shear Zones ◽  
Boundary Region ◽  
Eastern Ghats ◽  
Fault System ◽  
Tectonic Activity ◽  
Eastern Ghats Belt ◽  
Singhbhum Craton ◽  
The North ◽  
Suprasubduction Zone ◽  
Scale Shear

Abstract A number of crustal-scale shear zones have developed along the southern margin of the Singhbhum Craton, in the boundary with the Neoarchean Rengali Province and the Meso-Neoproterozoic Eastern Ghats Belt. The cratonic part, evolved in a suprasubduction zone setting, bears imprints of late Mesoarchean orogenic episode (D1C) at ca. 3.1 Ga with folding and thrust imbrication of the cratonic rocks. The succeeding orogenic imprint is etched in the Neoarchean (~2.8 Ga) with development of the Sukinda thrust along the craton margin and thrust-related deformation of the rocks of the Rengali Province (D2C-D1R). The latter event remobilized cratonic fringe with development of a spectacular E-W trending transpressional belt in the Southern Iron Ore Group rocks cored by the Sukinda ultramafics. In the Eastern Ghats Belt, the major ultrahigh-temperature orogeny took place during the Grenvillian-age (~1.0-0.9 Ga) assembly of the supercontinent Rodinia. This belt eventually got juxtaposed against the expanded Singhbhum Craton in the end-Neoproterozoic time (~0.5 Ga) along the Kerajang Fault Zone. This latter event remobilized a large part of the Rengali Province (D2R) with development of an intraterrane transpressional belt bounded by the Barkot Shear Zone in the north. The northern fringe of the intruding Eastern Ghats Belt developed a complex network of strike-slip fault system under this impact, probably an outcome of tectonic activity along the Kuunga suture, which signifies the joining of greater India with East Antarctica. The present synthesis visualizes early development in the craton through formation of a typical orogenic sequence, imbricated in thrust piles, resulting from a ca. 3.1 Ga orogeny. Further cratonic expansion was achieved via repetitive accretion and remobilization, development of crustal-scale faults and transpressional belts at ca. 2.8 Ga and ca. 0.5 Ga, much in a similar fashion as documented along oblique convergent margins of all ages.

scholarly journals Decratonization by rifting enables orogenic reworking and transcurrent dispersal of old terranes in NE Brazil

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Carlos E. Ganade ◽  
Roberto F. Weinberg ◽  
Fabricio A. Caxito ◽  
Leonardo B. L. Lopes ◽  
Lucas R. Tesser ◽  
...  
Keyword(s):  
Shear Zones ◽  
Boundary Region ◽  
The North ◽  
Pan African ◽  
Juvenile Material ◽  
Oceanic Basin ◽  
Borborema Province ◽  
Isotopic Model ◽  
Late Neoproterozoic

AbstractDispersion and deformation of cratonic fragments within orogens require weakening of the craton margins in a process of decratonization. The orogenic Borborema Province, in NE Brazil, is one of several Brasiliano/Pan-African late Neoproterozoic orogens that led to the amalgamation of Gondwana. A common feature of these orogens is that a period of extension and opening of narrow oceans preceded inversion and collision. For the case of the Borborema Province, the São Francisco Craton was pulled away from its other half, the Benino-Nigerian Shield, during an intermittent extension event between 1.0–0.92 and 0.9–0.82 Ga. This was followed by inversion of an embryonic and confined oceanic basin at ca. 0.60 Ga and transpressional orogeny from ca. 0.59 Ga onwards. Here we investigate the boundary region between the north São Francisco Craton and the Borborema Province and demonstrate how cratonic blocks became physically involved in the orogeny. We combine these results with a wide compilation of U–Pb and Nd-isotopic model ages to show that the Borborema Province consists of up to 65% of strongly sheared ancient rocks affiliated with the São Francisco/Benino-Nigerian Craton, separated by major transcurrent shear zones, with only ≈ 15% addition of juvenile material during the Neoproterozoic orogeny. This evolution is repeated across a number of Brasiliano/Pan-African orogens, with significant local variations, and indicate that extension weakened cratonic regions in a process of decratonization that prepared them for involvement in the orogenies, that led to the amalgamation of Gondwana.

scholarly journals Outline of the Nagssugtoqidian mobile belt of East Greenland

1979 ◽  
Vol 89 ◽  
pp. 9-18
Author(s):  
D Bridgwater ◽  
J.S Myers
Keyword(s):  
Shear Zones ◽  
Granulite Facies ◽  
Tectonic Activity ◽  
Mobile Belt ◽  
East Greenland ◽  
The North ◽  
Marginal Areas ◽  
High Level ◽  
North And South ◽  
Wide Zone

The Nagssugtoqidian mobile belt is a 240 km wide zone of deformation and plutonic activity which cuts across the Archaean craton of East Greenland. The belt was established 2600 m.y. ago by the formation of vertical E-W shear zones and the syntectonic intrusion of basic dykes. Tectonic activity along the E-W shear zones was followed by the emplacement of tonalitic intrusions, the Blokken gneisses, 2350 m.y. ago in the central parts of the mobile belt. The emplacement of the Blokken gneisses was accompanied and followed by further emplacement of basic dykes. These are synplutonic in the centre of the mobile belt but are emplaced into more rigid crust in the marginal areas of the belt and in the Archaean craton to the north and south. During a second major tectonic and thermal episode circa 1900 m.y. ago, the region was deformed by thrusting from the north. In the southem part of the mobile belt the earlier steep shear zones are cut by shear zones dipping gently northwards in which rocks are downgraded to greenschist facies. The grade of metamorphism increases northwards and shear zones are replaced by open folds with axial surfaces which dip gently northwards. The increasing ductility in the centre of and northem part of the belt is associated with the intrusion of charnockitic plutons and their granulite facies aureoles. Regional uplift occurred before the intrusion of high level post-tectonic plutons of diorite and granite 1550 m.y. ago.

scholarly journals THE INTRAPLATE VOLCANO-TECTONIC ACTIVITY IN NORTH-EASTERN AND SOUTH SECTORS OF THE PACIFIC LITHOSPHERIC PLATES WITH THE CONNECTION OF THE CHANGE OF ITS RELATIVE MOTION

2021 ◽  
Vol 49 (4) ◽  
pp. 102-127
Author(s):  
E. G. Mirlin ◽  
T. I. Lygina ◽  
E. I. Chesalova
Keyword(s):  
Relative Motion ◽  
Sedimentary Cover ◽  
Oceanic Lithosphere ◽  
Pacific Plate ◽  
Fault System ◽  
Tectonic Activity ◽  
The North ◽  
The Pacific ◽  
North Eastern ◽  
Absolute Age

The analysis of altimetric data in combination with bathymetry and gravimetry materials in the north-eastern and southern sectors of the Pacific Ocean, as well as detailed data on the underwater relief, the structure of the sedimentary cover, the composition and absolute age of basalts obtained within the area of domestic geological exploration for ferromanganese nodules (the Clarion-Clipperton zone) is carried out. Structural trends formed by local cone-shaped local structures of presumably volcanic nature, grouped along transform faults belonging to various stages of the kinematics of the Pacific Plate, have been traced in the structure of the oceanic lithosphere at various scale levels. The first trend corresponds to the extension of the fault system corresponding to the spreading system on the crest of the East Pacific rise before the restructuring of its planned geometry in the Paleocene-Eocene, the second coincides with their extension after the change in the relative movement of the Pacific Plate. The trends are characterized by planned disagreement, and an increase in the number of seamounts is observed in the areas of their intersection. Within the area of detailed studies, obvious signs of volcanic-tectonic activity were revealed: high dissection of the underwater relief, hills of different heights with steep slopes, whose volcanic nature is confirmed by differentiated basalts raised from their slopes, the absolute age of which indicates the multistage outpourings that occurred in an intraplate environment. The angular velocity of rotation of the spreading axis and the linear velocity of its advance with changes in the kinematics of the Pacific plate are estimated and possible reasons for changes in its relative motion are considered. An improved scheme of adaptation of the spreading zone to a change in the direction of relative plate movement is proposed, acc0ording to which an essential factor of intraplate volcanic-tectonic activity is the relaxation of stresses in the plate caused by external influence on it.

New geophysical data from the northern Cordillera: preliminary interpretations and implications for the tectonics and deep geology

1994 ◽  
Vol 31 (6) ◽  
pp. 891-904 ◽  
Author(s):  
C. Lowe ◽  
R. B. Horner ◽  
J. K. Mortensen ◽  
S. T. Johnston ◽  
C. F. Roots
Keyword(s):  
Gravity Data ◽  
Field Studies ◽  
Geophysical Data ◽  
Fault System ◽  
Tectonic Activity ◽  
Denali Fault ◽  
The North ◽  
The Pacific ◽  
Proterozoic Basement ◽  
Seismic Sections

In this paper we analyze recently acquired geophysical data from the northern Cordillera and their relation to the mapped geology. A prominent gravity high (> −45 mGal (1 Gal = 1 cm/s2)) coincides with a magnetic low and an aseismic region in west-central Yukon where the underlying geology is dominated by quartzo-feldspathic rocks having moderate densities. Extension (~15%), magmatic underplating, and accretion of the anomalous region onto oceanic crust are three possible explanations.Magnetic, gravity, and seismicity data all show significant differences in the physical state of the crust on either side of the Tintina Fault and, together with geological data indicating large offset, suggest it was once a major crustal-scale strike-slip fault. The new gravity data also delineate an arcuate zone of steep gradients (up to 1.4 mGal/km) in the miogeocline, which may correlate with a west-dipping Proterozoic basement ramp mapped on deep seismic sections farther to the north and a transition from thin (east) to thick sediment cover (west). Seismicity data show that current tectonic activity is concentrated along the Pacific – North America plate margin in southwestern Yukon and adjacent Alaska and, although there is a marked decrease in activity inland of this margin, notable concentrations occur along the Denali Fault System and in the eastern miogeocline. There is a distinct absence of earthquakes in parts of the Selwyn Basin and in the northern Yukon–Tanana Terrane. Limited field studies suggest activity is confined to the upper 10–15 km of the crust.

Time constraints and fault kinematic evolution of the Periadriatic Fault System along the Meran-Mauls segment (N Italy)

2021 ◽  
Author(s):  
Stefano Zanchetta ◽  
Chiara Montemagni ◽  
Claudia Mascandola ◽  
Andrea Zanchi
Keyword(s):  
Structural Analysis ◽  
Seismic Activity ◽  
Microstructural Analysis ◽  
Shear Zones ◽  
Fault System ◽  
Time Interval ◽  
Brittle Deformation ◽  
The North ◽  
Kinematic Evolution ◽  
Deformation Regime

<p>The Periadriatic Fault System (PFS) is one of the most important tectonic element in the Alps, separating the Europe-verging collisional wedge from the S-verging Southern Alps. The PFS developed in a dextral transpressional regime during the Cenozoic, following the Adria-Europe collision. The area between the Passeier and the Eisack rivers (Meran, NE Italy) is a key area for the understanding of the interactions among the PFS, the Giudicarie Fault and the fault network here active in the middle to late Cenozoic. Here the elsewhere E-W trending PFS rotates to a NE-SW trend, impliying significant changes in the fault kinematics and evolution.</p><p>The NE-SW strand of the PFS, known as the Meran-Mauls fault, is connected to the North Giudicarie Fault to the west and to the Pustertal segment of the PFS to the east. A general evolution from the ductile to brittle deformation regime has been recognized on the base of field-based structural analysis and microstructural analysis of fault rocks. Pseudotachylytes occur all along the fault zone, testifying to the seismic activity of the Meran-Mauls fault. <sup>40</sup>Ar-<sup>39</sup>Ar dating of pseudotachylytes provided ages in the 32-22 Ma time interval, indicating that the PFS experienced a prolonged seismic activity during middle Cenozoic times. Several pseudotachylytes veins show a re-activation as cm-thick ductile shear zones, indicating that the plastic-brittle transition was not sharp in time.</p><p>Combining the structural analysis of the PFS with other adjacent faults connected in space and time (Passeier fault, Faltleis fault, Val Nova fault and other minor faults) we reconstructed a marked reverse dip-slip kinematics of the Meran-Mauls Fault during a progressive transition across the plastic-brittle regime, followed in time by a dextral transpression. Paleostress reconstructions performed on these faults populations indicate a progressive switch of the main direction of compression from NW-SE to N-S. This switch likely occurred when the Meran-Mauls segment of the PFS definitively passed to a brittle deformation regime.</p><p> </p>

scholarly journals Crustal-scale shear zones and heterogeneous structure beneath the North Anatolian Fault Zone, Turkey, revealed by a high-density seismometer array

2015 ◽  
Vol 430 ◽  
pp. 129-139 ◽  
Author(s):  
Metin Kahraman ◽  
David G. Cornwell ◽  
David A. Thompson ◽  
Sebastian Rost ◽  
Gregory A. Houseman ◽  
...  
Keyword(s):  
Fault Zone ◽  
Shear Zones ◽  
High Density ◽  
North Anatolian Fault ◽  
Heterogeneous Structure ◽  
North Anatolian Fault Zone ◽  
The North ◽  
Scale Shear

The geometry of the North Anatolian transform fault in the Sea of Marmara and its temporal evolution: implications for the development of intracontinental transform faults

2014 ◽  
Vol 51 (3) ◽  
pp. 222-242 ◽  
Author(s):  
A.M. Celâl Şengör ◽  
Céline Grall ◽  
Caner İmren ◽  
Xavier Le Pichon ◽  
Naci Görür ◽  
...  
Keyword(s):  
Shear Zone ◽  
Shear Zones ◽  
Strike Slip ◽  
North Anatolian Fault ◽  
Strike Slip Fault ◽  
Fault System ◽  
Transform Fault ◽  
Sea Of Marmara ◽  
The North ◽  
Macro Scale

The North Anatolian Fault is a 1200 km long strike-slip fault system connecting the East Anatolian convergent area with the Hellenic subduction zone and, as such, represents an intracontinental transform fault. It began forming some 13–11 Ma ago within a keirogen, called the North Anatolian Shear Zone, which becomes wider from east to west. Its width is maximum at the latitude of the Sea of Marmara, where it is 100 km. The Marmara Basin is unique in containing part of an active strike-slip fault system in a submarine environment in which there has been active sedimentation in a Paratethyan context where stratigraphic resolution is higher than elsewhere in the Mediterranean. It is also surrounded by a long-civilised rim where historical records reach well into the second half of the first millennium BCE (before common era). In this study, we have used 210 multichannel seismic reflexion profiles, adding up to 6210 km profile length and high-resolution bathymetry and chirp profiles reported in the literature to map all the faults that are younger than the Oligocene. Within these faults, we have distinguished those that cut the surface and those that do not. Among the ones that do not cut the surface, we have further created a timetable of fault generation based on seismic sequence recognition. The results are surprising in that faults of all orientations contain subsets that are active and others that are inactive. This suggests that as the shear zone evolves, faults of all orientations become activated and deactivated in a manner that now seems almost haphazard, but a tendency is noticed to confine the overall movement to a zone that becomes narrower with time since the inception of the shear zone, i.e., the whole keirogen, at its full width. In basins, basin margins move outward with time, whereas highs maintain their faults free of sediment cover, making their dating difficult, but small perched basins on top of them in places make relative dating possible. In addition, these basins permit comparison of geological history of the highs with those of the neighbouring basins. The two westerly deeps within the Sea of Marmara seem inherited structures from the earlier Rhodope–Pontide fragment/Sakarya continent collision, but were much accentuated by the rise of the intervening highs during the shear evolution. When it is assumed that below 10 km depth the faults that now constitute the Marmara fault family might have widths approaching 4 km, the resulting picture resembles a large version of an amphibolite-grade shear zone fabric, an inference in agreement with the scale-independent structure of shear zones. We think that the North Anatolian Fault at depth has such a fabric not only on a meso, but also on a macro scale. Detection of such broad, vertical shear zones in Precambrian terrains may be one way to get a handle on relative plate motion directions during those remote times.

Analyses des contraintes par méthodes graphiques dans une zone de coulissage : exemple de la région de Matapédia, Gaspésie, Appalaches du Québec

1993 ◽  
Vol 30 (3) ◽  
pp. 591-602 ◽  
Author(s):  
Claude Trudel ◽  
Michel Malo
Keyword(s):  
Cross Sections ◽  
Shear Zones ◽  
Strike Slip ◽  
Geological Mapping ◽  
Fault System ◽  
Upper Ordovician ◽  
The North ◽  
Principal Compressive Stress ◽  
Ground Faults ◽  
Dextral Strike Slip

The north-northeast trending Sellarsville and Rafting Ground faults are southeasterly directed Acadian (Devonian) thrusts in the Québec Appalachians. They are located at the western end of the Grand Pabos fault system, a dextral strike-slip fault system that transects Upper Ordovician to Lower Devonian sedimentary rocks in the southern Gaspé Peninsula. The structural analysis of mesoscopic brittle and brittle–ductile shear zones by graphical methods was used to determine the stress field related to these two faults. The attitude of slip lines was calculated when the slickenside striations were not observed on the movement plane. Conjugate faults, Arthaud's method, and Angelier and Mechler's method were used to determine the paleostress. The maximum principal compressive stress σ1, always subhorizontal and striking west-northwest – east-southeast, is perpendicular to the Sellarsville and Rafting Ground faults and was probably the cause of the thrusting motion along the faults. North-northeast-trending regional folds and cleavage could also be related to this same stress. Geological mapping and structural cross sections confirm the southeasterly directed thrust motions, which are well integrated in the Grand Pabos fault system. Sellarsville and Rafting Ground faults with the Restigouche fault may represent a leading contractional imbricate fan in a dextral strike-slip system. [Journal Translation]

scholarly journals Decratonization by Rifting followed by Orogeny and Transcurrent Dispersal of Old Terranes in NE Brazil: A Common Feature of Gondwana Amalgamation?

2020 ◽  
Author(s):  
Carlos Ganade ◽  
Roberto Weinberg ◽  
Fabricio Caxito ◽  
Leonardo Lopes ◽  
Lucas Tesser ◽  
...  
Keyword(s):  
Shear Zones ◽  
Boundary Region ◽  
The North ◽  
Juvenile Material ◽  
Borborema Province ◽  
Isotopic Model ◽  
Late Neoproterozoic

Abstract Dispersion and deformation of cratonic fragments within orogens in the periphery of cratons require weakening of the craton margins in a process of decratonization. The Borborema orogenic province, in NE Brazil, is one of several Brasiliano/Panafrican late Neoproterozoic orogens that led to the amalgamation of Gondwana. A common feature of these orogens is that a period of extension and opening of narrow oceans preceded inversion and collision. For the case of the Borborema Province, the São Francisco Craton was pulled away from its other half, the Benino-Nigerian Shield, during an extension event lasting between 1 Ga and 0.65 Ma. This was followed by inversion and a transpressional orogeny from c. 0.60 Ga onwards. Here we investigate the boundary region between the north São Francisco Craton and the Borborema Province and demonstrate how cratonic blocks became physically involved in the orogeny. We combine these results with a wide compilation of U-Pb and Nd-isotopic model ages to show that the BP consists of up to 65% of strongly sheared ancient rocks affiliated with the Sao Francisco/Benino-Nigerian Craton, separated by major transcurrent shear zones, with only ~ 15 % addition of juvenile material during the orogeny. This evolution is repeated across a number of Brasiliano/Panafrican orogens, with significant local variations, and indicate that extension weakened entire cratonic regions in a process of decratonization that prepared them for involvement in the orogenies that led to the amalgamation of Gondwana.

Sign in / Sign up

Export Citation Format

Share Document