Analyses des contraintes par méthodes graphiques dans une zone de coulissage : exemple de la région de Matapédia, Gaspésie, Appalaches du Québec

1993 ◽  
Vol 30 (3) ◽  
pp. 591-602 ◽  
Author(s):  
Claude Trudel ◽  
Michel Malo
Keyword(s):  
Cross Sections ◽  
Shear Zones ◽  
Strike Slip ◽  
Geological Mapping ◽  
Fault System ◽  
Upper Ordovician ◽  
The North ◽  
Principal Compressive Stress ◽  
Ground Faults ◽  
Dextral Strike Slip

The north-northeast trending Sellarsville and Rafting Ground faults are southeasterly directed Acadian (Devonian) thrusts in the Québec Appalachians. They are located at the western end of the Grand Pabos fault system, a dextral strike-slip fault system that transects Upper Ordovician to Lower Devonian sedimentary rocks in the southern Gaspé Peninsula. The structural analysis of mesoscopic brittle and brittle–ductile shear zones by graphical methods was used to determine the stress field related to these two faults. The attitude of slip lines was calculated when the slickenside striations were not observed on the movement plane. Conjugate faults, Arthaud's method, and Angelier and Mechler's method were used to determine the paleostress. The maximum principal compressive stress σ1, always subhorizontal and striking west-northwest – east-southeast, is perpendicular to the Sellarsville and Rafting Ground faults and was probably the cause of the thrusting motion along the faults. North-northeast-trending regional folds and cleavage could also be related to this same stress. Geological mapping and structural cross sections confirm the southeasterly directed thrust motions, which are well integrated in the Grand Pabos fault system. Sellarsville and Rafting Ground faults with the Restigouche fault may represent a leading contractional imbricate fan in a dextral strike-slip system. [Journal Translation]

Miocene to Messinian deformation and hydrothermal activity in a pre-Alpine basement massif of the French western Alps: new U-Th-Pb and argon ages from the Lauzière massif

2010 ◽  
Vol 181 (3) ◽  
pp. 227-241 ◽  
Author(s):  
Dominique Gasquet ◽  
Jean-Michel Bertrand ◽  
Jean-Louis Paquette ◽  
Jérémie Lehmann ◽  
Gueorgui Ratzov ◽  
...  
Keyword(s):  
Late Miocene ◽  
Shear Zones ◽  
Hydrothermal Activity ◽  
Western Alps ◽  
Strike Slip ◽  
Quartz Veins ◽  
The North ◽  
Slip Regime ◽  
Tectonically Active ◽  
Dextral Strike Slip

Abstract U-Pb and Th-Pb dating of monazite from hydrothermal quartz veins (“Alpine veins”) from the Lauzière massif (North Belledonne) together with Ar/Ar ages of adularias from the same veins constrain the age of the last tectono-metamorphic events that affected the External Crystalline Massifs (ECM). Ages obtained are surprisingly young. The study of the structural context of the veins combined with our chronological data, allow us to propose a tectonic scenario of the northern ECM for the 15-5 Ma period, which was poorly documented so far. The quartz veins are of two types: (i) the oldest are poorly mineralized (chlorite and epidote), flat-lying veins. The quartz fibres (= extension direction) are near vertical and seem to be associated with a subvertical dissolution schistosity superimposed upon an early Alpine deformation underlined by “mini-biotite”. They bear a sub-horizontal stretching lineation; (ii) the youngest veins are very rich in various minerals (anatase, rutile, phénacite, meneghinite, beryl, synchysite, ….). They are almost vertical. Their “en echelon” geometry as well as the horizontal attitude of their quartz fibres show a dextral strike-slip regime. Two groups of Th-Pb ages have been obtained: 11 to 10 Ma and 7 to 5 Ma. They were obtained from the most recent veins (vertical veins) sampled in different areas of the massif. The ca. 10 Ma ages are related to veins in the Lauzière granite and its metamorphic country-rocks at about 2 km from the eastern contact of the massif, while the ages of ca. 5 Ma correspond to veins occurring in mylonites along this contact. Adularias provided Ar/Ar ages at ca. 7 Ma. By contrast, a monazite from a vein of the Pelvoux massif (Plan du Lac) yielded a Th-Pb age of 17.6 Ma but in a different structural setting. Except fission track ages, there are very little ages of this range published in the recent literature on the Alps. The latter concern always gold mineralized veins (NE Mont Blanc and SW Lepontine dome). The last compressive tectonic regime dated between 15 and 12 Ma is coeval with (i) the late “Roselend thrust” event, which is recorded in the Mont Blanc by shear-zones with vertical lineation, (ii) the last movements in the basal mylonites of the Swiss Nappes, (iii) the horizontal Alpine veins from the Mont Blanc and Belledonne massifs (with vertical quartz fibres), which are similar to the early veins of the Lauzière. On the contrary, the vertical veins of the Lauzière, dated between 11 and 5 Ma, correspond to a dextral strike slip regime. This suggests that most of the strike-slip tectonics along the ECM took place during two stages (ca. 10 Ma and ca. 7-5 Ma) and not only at 18 Ma as had been proposed previously. Our ages are consistent with the late Miocene-Pliocene overlap of the Digne thrust to the South and to part of the normal movement along the Simplon fault to the North. Thus, all the external crystalline massifs were tectonically active during the late Miocene. This suggests that tectonic events in the external alpine belt may have contributed to some extent to the geodynamical causes of the Messinian crisis.

Geological mapping of the 1985 Chinese—British Tibetan (Xizang—Qinghai) Plateau Geotraverse route

1988 ◽  
Vol 327 (1594) ◽  
pp. 287-305 ◽  
Keyword(s):  
Strike Slip ◽  
Geological Mapping ◽  
Strike Slip Fault ◽  
Fault System ◽  
Late Triassic ◽  
Clastic Rocks ◽  
The North ◽  
Opposite Sequence ◽  
Geological Map ◽  
Qiangtang Terrane

The 1:500,000 coloured geological map of the traverse route combines observations from the Geotraverse, previous mapping, and interpretation of orbital images. The position of all localities visited by Geotraverse participants and basic geological data collected by them along the traverse route are shown on a set of maps originally drawn at 1:100,000 scale, reproduced on microfiche for this publication. More detailed mapping, beyond a single line of section, was achieved in five separate areas. The relationships between major rock units in these areas, and their significance, are outlined in this paper. Near Gyanco, (Lhasa Terrane) an ophiolite nappe, apparently connected with outcrops of ophiolites in the Banggong Suture about 100 km to the north, was under thrust by a discontinuous slice of Carboniferous—Permian clastic rocks and limestone, contrary to a previous report of the opposite sequence. At Amdo, a compressional left-lateral strike-slip fault zone has modified relationships along the Banggong Suture. Near Wuli, (northern Qiangtang Terrane) limited truncation of Triassic strata at the angular unconformity below Eocene redbeds demonstrates that most of the folding here is of Tertiary age. The map of the nearby Erdaogou region displays strong fold and thrust-shortening of the Eocene redbeds, evidence of significant crustal shortening after the India- Asia collision began. In the Xidatan-Kunlun Pass area, blocks of contrasting Permo—Triassic rocks are separated by east-trending faults. Some of these faults are ductile and of late Triassic — early Jurassic age, others are brittle and part of the Neogene—Quaternary Kunlun leftlateral strike-slip fault system. Some more significant remaining problems that geological mapping might help to solve are discussed briefly, including evidence for a possible additional ophiolitic suture within the Qiangtang Terrane.

The geometry of the North Anatolian transform fault in the Sea of Marmara and its temporal evolution: implications for the development of intracontinental transform faults

2014 ◽  
Vol 51 (3) ◽  
pp. 222-242 ◽  
Author(s):  
A.M. Celâl Şengör ◽  
Céline Grall ◽  
Caner İmren ◽  
Xavier Le Pichon ◽  
Naci Görür ◽  
...  
Keyword(s):  
Shear Zone ◽  
Shear Zones ◽  
Strike Slip ◽  
North Anatolian Fault ◽  
Strike Slip Fault ◽  
Fault System ◽  
Transform Fault ◽  
Sea Of Marmara ◽  
The North ◽  
Macro Scale

The North Anatolian Fault is a 1200 km long strike-slip fault system connecting the East Anatolian convergent area with the Hellenic subduction zone and, as such, represents an intracontinental transform fault. It began forming some 13–11 Ma ago within a keirogen, called the North Anatolian Shear Zone, which becomes wider from east to west. Its width is maximum at the latitude of the Sea of Marmara, where it is 100 km. The Marmara Basin is unique in containing part of an active strike-slip fault system in a submarine environment in which there has been active sedimentation in a Paratethyan context where stratigraphic resolution is higher than elsewhere in the Mediterranean. It is also surrounded by a long-civilised rim where historical records reach well into the second half of the first millennium BCE (before common era). In this study, we have used 210 multichannel seismic reflexion profiles, adding up to 6210 km profile length and high-resolution bathymetry and chirp profiles reported in the literature to map all the faults that are younger than the Oligocene. Within these faults, we have distinguished those that cut the surface and those that do not. Among the ones that do not cut the surface, we have further created a timetable of fault generation based on seismic sequence recognition. The results are surprising in that faults of all orientations contain subsets that are active and others that are inactive. This suggests that as the shear zone evolves, faults of all orientations become activated and deactivated in a manner that now seems almost haphazard, but a tendency is noticed to confine the overall movement to a zone that becomes narrower with time since the inception of the shear zone, i.e., the whole keirogen, at its full width. In basins, basin margins move outward with time, whereas highs maintain their faults free of sediment cover, making their dating difficult, but small perched basins on top of them in places make relative dating possible. In addition, these basins permit comparison of geological history of the highs with those of the neighbouring basins. The two westerly deeps within the Sea of Marmara seem inherited structures from the earlier Rhodope–Pontide fragment/Sakarya continent collision, but were much accentuated by the rise of the intervening highs during the shear evolution. When it is assumed that below 10 km depth the faults that now constitute the Marmara fault family might have widths approaching 4 km, the resulting picture resembles a large version of an amphibolite-grade shear zone fabric, an inference in agreement with the scale-independent structure of shear zones. We think that the North Anatolian Fault at depth has such a fabric not only on a meso, but also on a macro scale. Detection of such broad, vertical shear zones in Precambrian terrains may be one way to get a handle on relative plate motion directions during those remote times.

scholarly journals Basin Progress – Active Deformation Analysis by Tectonostratigraphic Elements and Geophysical Methods on North Anatolian Fault System (Eastern Marmara Region, Turkey)

2021 ◽  
Author(s):  
Bülent Doğan ◽  
Metin Aşcı ◽  
Ahmet Karakaş ◽  
Ertan Pekşen ◽  
Arzu Erener ◽  
...  
Keyword(s):  
Strike Slip ◽  
North Anatolian Fault ◽  
Fault System ◽  
Magnetic Method ◽  
Lake Basin ◽  
Active Deformation ◽  
Southern Boundary ◽  
The North ◽  
Dextral Strike Slip ◽  
Northern Branch

Abstract The Northern Branch of the North Anatolian Fault System controls and deforms the Izmit Basin and the Sapanca Lake Basin in the study area. Unlike the Sapanca Lake Basin, the oblique normal faults with WNW–ESE trending with maximum length of 5 km in the south of the basin have contributed to the deformation process in the formation of Izmit Basin. The fault sets mainly incline to the north. The N-S width of the dextral strike-slip active deformation was determined as 9 km at Izmit basin and 3.8 km at Sapanca Lake basin. Further, the minimum principal stress axes (σ3) vary in the trending ranges of N11°-74° E, which are caused by the transtensional stresses associated with strike-slip faulting in the Izmit Basin by a different tectonic source than the Sapanca Lake Basin. Besides, the crust depth of main strand of NAFS-NB was determined up to 1112 m by magnetic method. The secondary faults were determined by both magnetic and resistivity methods up to a depth of 110 m. The depression area between Izmit bay and Sapanca Lake on the northern Anatolian fault is an integrated basin with two dextral strike-slip tectonic origins. Thus, the Izmit Basin, along with the main strike-slip faulting, has been developed in the asymmetric negative flower structure, where only the southern boundary has become a fault. The Sapanca Lake Basin is a lazy-Z-shaped pull-apart system formed by the E–W trending fault as a releasing bend. A simple shear deformation ellipsoid with a long axis of approximately 35 km on the Northern Branch of the North Anatolian Fault System is defined for the Izmit – Sapanca integrated basin. Therefore, intra-basin deposits have different depths estimated from the gravity data in the Izmit – Sapanca integrated basin, and the maximum sediment thickness estimated is 2200 m in the middle of the Izmit Basin.

Is the North Altyn fault part of a strike-slip duplex along the Altyn Tagh fault system?

Geology ◽  
2000 ◽  
Vol 28 (3) ◽  
pp. 255 ◽  
Author(s):  
Eric Cowgill ◽  
An Yin ◽  
Wang Xiao Feng ◽  
Zhang Qing
Keyword(s):  
Strike Slip ◽  
Fault System ◽  
Altyn Tagh Fault ◽  
The North ◽  
Altyn Tagh

Inversion of regional surface-wave spectra for source parameters of aftershocks from the 1992 Petrolia earthquake sequence

1995 ◽  
Vol 85 (3) ◽  
pp. 705-715
Author(s):  
Mark Andrew Tinker ◽  
Susan L. Beck
Keyword(s):  
Surface Wave ◽  
Focal Mechanism ◽  
Source Parameters ◽  
Strike Slip ◽  
Earthquake Sequence ◽  
Fault System ◽  
Accretionary Wedge ◽  
Wave Spectra ◽  
The North ◽  
Gorda Plate

Abstract Regional distance surface waves are used to study the source parameters for moderate-size aftershocks of the 25 April 1992 Petrolia earthquake sequence. The Cascadia subduction zone had been relatively seismically inactive until the onset of the mainshock (Ms = 7.1). This underthrusting event establishes that the southern end of the North America-Gorda plate boundary is seismogenic. It was followed by two separate and distinct large aftershocks (Ms = 6.6 for both) occurring at 07:41 and 11:41 on 26 April, as well as thousands of other small aftershocks. Many of the aftershocks following the second large aftershock had magnitudes in the range of 4.0 to 5.5. Using intermediate-period surface-wave spectra, we estimate focal mechanisms and depths for one foreshock and six of the larger aftershocks (Md = 4.0 to 5.5). These seven events can be separated into two groups based on temporal, spatial, and principal stress orientation characteristics. Within two days of the mainshock, four aftershocks (Md = 4 to 5) occurred within 4 hr of each other that were located offshore and along the Mendocino fault. These four aftershocks comprise one group. They are shallow, thrust events with northeast-trending P axes. We interpret these aftershocks to represent internal compression within the North American accretionary prism as a result of Gorda plate subduction. The other three events compose the second group. The shallow, strike-slip mechanism determined for the 8 March foreshock (Md = 5.3) may reflect the right-lateral strike-slip motion associated with the interaction between the northern terminus of the San Andreas fault system and the eastern terminus of the Mendocino fault. The 10 May aftershock (Md = 4.1), located on the coast and north of the Mendocino triple junction, has a thrust fault focal mechanism. This event is shallow and probably occurred within the accretionary wedge on an imbricate thrust. A normal fault focal mechanism is obtained for the 5 June aftershock (Md = 4.8), located offshore and just north of the Mendocino fault. This event exhibits a large component of normal motion, representing internal failure within a rebounding accretionary wedge. These two aftershocks and the foreshock have dissimilar locations in space and time, but they do share a north-northwest oriented P axis.

Seismic attribute for characterization and prediction of carbonate faulted karst reservoirs in Tarim Basin, China

2021 ◽  
pp. 1-36
Author(s):  
Zhiwei Xiao ◽  
Li Wang ◽  
Ruizhao Yang ◽  
Dewei Li ◽  
Lingbin Meng
Keyword(s):  
Tarim Basin ◽  
Oil And Gas ◽  
Prediction Method ◽  
Strike Slip ◽  
Fault System ◽  
Bright Spot ◽  
Upper Ordovician ◽  
Reservoir Prediction ◽  
Seismic Attribute ◽  
Gas Field

An ultradeep, faulted karst reservoir of Ordovician carbonate was discovered in the Shunbei area of the Tarim Basin. Fractured-cavity reservoirs buried beneath the large thickness of upper Ordovician mudstone were formed along the fault-karst belts. The hydrocarbon accumulation in these reservoirs is controlled by the fault system, and the oil-gas accumulation was affected by karstification and hydrothermal reformation. Previous studies and 2D modeling revealed that the reservoirs had “bright spot” amplitude responses like “string beads,” and they have developed along the strike-slip faults. However, describing such a complex fault-controlled karst system is still a difficult problem that has not been well addressed. We have sought to instruct the attribute expression of faulted karst reservoirs in the northern part of the Tarim Basin. We applied coherence and fault likelihood (FL) seismic attributes to image faults and fractures zones. We then used a trend analysis method to calculate the residual impedance from the impedance of the acoustic inversion, using the fact that residual impedance has higher lateral resolution in reservoir predictions. Finally, we integrated the coherence, FL, and residual impedance attributes into a new seismic attribute, the “fault-vuggy body,” with a certain fusion coefficient. The fault-vuggy body attribute establishes a connection between faults and karst cavities. This method could help in the characterization and prediction of carbonate faulted karst reservoirs. Available drilling data were used to validate that the fused fault-vuggy body attribute was an effective reservoir prediction method. As the seismic sections and slices along the layer help delineate, the distribution of bright spots and strike-slip faults indicates that the main strike-slip fault zones are the most favorable reservoirs in the Shunbei Oil and Gas Field.

scholarly journals Structural analysis of the Rio Preto fold belt (northwestern Bahia / southern Piauí), a doubly-vergent asymmetric fan developed during the Brasiliano Orogeny

2014 ◽  
Vol 86 (3) ◽  
pp. 1101-1113 ◽  
Author(s):  
FABRÍCIO A. CAXITO ◽  
ALEXANDRE UHLEIN ◽  
LUIZ F.G. MORALES ◽  
MARCOS EGYDIO-SILVA ◽  
JULIO C.D. SANGLARD ◽  
...  
Keyword(s):  
Structural Analysis ◽  
Structural Evolution ◽  
Shear Zones ◽  
Central Compartment ◽  
Strike Slip ◽  
Fold Belt ◽  
Main Structure ◽  
The North ◽  
Brasiliano Orogeny ◽  
Analog Models

The Rio Preto fold belt borders the northwestern São Francisco craton and shows an exquisite kilometric doubly-vergent asymmetric fan structure, of polyphasic structural evolution attributed exclusively to the Brasiliano Orogeny (∼600-540 Ma). The fold belt can be subdivided into three structural compartments: The Northern and Southern compartments showing a general NE-SW trend, separated by the Central Compartment which shows a roughly E-W trend. The change of dip of S2, a tight crenulation foliation which is the main structure of the fold belt, between the three compartments, characterizes the fan structure. The Central Compartment is characterized by sub-vertical mylonitic quartzites, which materialize a system of low-T strike slip shear zones (Malhadinha – Rio Preto Shear Zone) crosscutting the central portion of the fold belt. In comparison to published analog models, we consider that the unique structure of the Rio Preto fold belt was generated by the oblique, dextral-sense interaction between the Cristalândia do Piauí block to the north and the São Francisco craton to the south.

scholarly journals Neogene kinematics of the Giudicarie Belt and eastern Southern Alpine orogenic front (Northern Italy)

2021 ◽  
Author(s):  
Vincent F. Verwater ◽  
Eline Le Breton ◽  
Mark R. Handy ◽  
Vincenzo Picotti ◽  
Azam Jozi Najafabadi ◽  
...  
Keyword(s):  
Cross Sections ◽  
Eastern Alps ◽  
Strike Slip ◽  
Fault System ◽  
Late Oligocene ◽  
Lateral Variation ◽  
Tectonic Structures ◽  
Tauern Window ◽  
Adriatic Plate ◽  
Lateral Extrusion

Abstract. Neogene indentation of the Adriatic plate into Europe led to major modifications of the Alpine orogenic structures and style of deformation in the Eastern Alps. Especially, the offset of the Periadriatic Fault by the Northern Giudicarie Fault marks the initiation of strike-slip faulting and lateral extrusion of the Eastern Alps. Questions remain on the exact role of this fault zone in changes of the Alpine orogen at depth. This necessitates quantitative analysis of the shortening, kinematics and depth of decoupling underneath the Northern Giudicarie Fault and associated fold-and thrust belt in the Southern Alps. Tectonic balancing of a network of seven cross sections through the Giudicarie Belt parallel to the local shortening direction reveals that it comprises two kinematic domains with different amounts and partly overlapping ages of shortening. These two domains are delimitated by the NW-SE oriented strike-slip Trento-Cles – Schio-Vicenza fault system, cross-cutting the Southern Alpine orogenic front in the south and merging with the Northern Giudicarie Fault in the north. The SW kinematic domain (Val Trompia sector) accommodated at least ~18 km of Late Oligocene to Early Miocene shortening. Since the Middle Miocene, the SW kinematic domain experienced a minimum of ~12–22 km shortening, whereas the NE kinematic domain underwent at least ~25–35 km shortening. Together, these domains contributed to an estimated ~53–75 km of sinistral strike-slip motion along the Northern Giudicarie Fault, implying that (most of) the offset of the Periadriatic Fault is due to Late Oligocene to Neogene indentation of the Adriatic plate into the Eastern Alps. Moreover, the faults linking the Giudicarie Belt with the Northern Giudicarie Fault reach ~15–20 km depth, indicating a thick-skinned tectonic style of deformation. These fault detachments may also connect at depth with a lower crustal Adriatic wedge that protruded north of the Periadriatic Fault and was responsible for N-S shortening and eastward escape of deeply exhumed units in the Tauern Window. Finally, the east-west lateral variation of shortening indicates internal deformation and lateral variation in strength of the Adriatic indenter, related to Permian – Mesozoic tectonic structures and paleogeographic domains.

scholarly journals Structural cross sections through the Corinth-Patras detachment fault-system in Northern Peloponnesus (Aegean Arc, Greece)

2001 ◽  
Vol 34 (1) ◽  
pp. 235 ◽  
Author(s):  
N. FLOTTÉ ◽  
D. SOREL
Keyword(s):  
Cross Sections ◽  
Detachment Fault ◽  
Fault System ◽  
Normal Faults ◽  
Field Observations ◽  
Structural Mapping ◽  
The North ◽  
Gulf Of Corinth ◽  
Aegean Arc

Structural mapping in northern Peloponnesus reveals the emergence of an E-W striking, more than 70km long, low angle detachment fault dipping to the north beneath the Gulf of Corinth. This paper describes four north-south structural cross-sections in northern Peloponnesus. Structural and sedimentological field observations show that in the studied area the normal faults of northern Peloponnesus branch at depth on this major low angle north-dipping brittle detachment. The southern part of the detachment and the related normal faults are now inactive. To the north, the active Helike and Aigion normal faults are connected at depth with the seismically active northern part of the detachment beneath the Gulf of Corinth.

Sign in / Sign up

Export Citation Format

Share Document