scholarly journals Stratigraphic organisation of the Jurassic sequence in Interior Oman, Arabian Peninsula

GeoArabia ◽  
2006 ◽  
Vol 11 (1) ◽  
pp. 17-50 ◽  
Author(s):  
Mathieu Rousseau ◽  
Gilles Dromart ◽  
Henk Droste ◽  
Peter Homewood
Keyword(s):  
Middle Jurassic ◽  
Large Scale ◽  
Geometric Model ◽  
Sedimentary Facies ◽  
Source Rocks ◽  
Correlation Technique ◽  
Well Log ◽  
Angular Unconformity ◽  
Stratigraphic Model ◽  
Jurassic Sequence

ABSTRACT A Stratigraphic model is proposed for the Jurassic sequence in Interior Oman. The model is based on regional well-log correlations, outcrop analysis and integration of Biostratigraphy. Large-scale architectures are restored using a well-to-well correlation technique, after the well-log markers of the relevant surfaces of sequence stratigraphy are identified. This identification is achieved by comparing well-log signatures to lithological and sedimentological columns of nearby exposed sections. The subsurface dataset consists of 19 wells arranged in two east-west profiles, 341 km and 332 km long. The Jurassic sequence in Interior Oman shows a general easterly thinning wedge and includes two hiatuses with marked age-gaps. Three major depositional episodes are identified: (1) a Pliensbachian-Toarcian coastal encroachment in a southward direction, represented by the dominantly clastic deposition of the Lower Mafraq Formation upon the Permian carbonates; (2) a general late Bajocian marine flooding (hybrid facies of marginal-marine environments of the Upper Mafraq Formation), followed through the Bathonian-Callovian by the carbonate Dhruma-Tuwaiq System which evolved through time from a low-angle, homoclinal ramp dipping in a (north) westwards direction, to a purely aggradational, flat-topped platform (upper Dhruma and Tuwaiq Mountain formations); (3) a Kimmeridgian-Tithonian onlap in an eastwards direction of finegrained limestones (Jubaila-Rayda) upon the post-Tuwaiq unconformity. Depositional hiatuses in the early Liassic and at the Early-Middle Jurassic transition are likely to reflect major eustatic sea-level lowstands. In contrast, subsurface correlations of the MFSs through the Dhruma-Tuwaiq indicate that the post-Tuwaiq unconformity is a low-angle (0.001 degrees) angular unconformity associated with tilting and truncation of the underlying sequences. Oxfordian sequences were probably never deposited in Interior Oman because of a lack of accommodation space and prolonged subaerial exposure. It is here proposed that the Upper/Middle Jurassic angular unconformity in Interior Oman was planed-off by subaerial carbonate dissolution during a steady, tectonically-driven uplift of the whole eastern Arabian shelf edge. The proposed geological model has several implications for the petroleum systems of Interior Oman. The geometric model predicts the distribution of the sedimentary facies, including source rocks, clastic and carbonate reservoirs, and seal facies. The occurrence of isolated Upper Mafraq-producing reservoir sands (i.e. Sayh Rawl field) are believed to be restricted to central and eastern Interior Oman. There are two other reservoir/seal combinations, both related to the Upper/Middle Jurassic unconformity: (1) truncation traps of the Dhruma-Tuwaiq below the unconformity (i.e. Hadriya and Uwainat reservoirs); (2) updip pinch-out trap of the Hanifa above the unconformity. Finally, it is believed that the early Late Jurassic general uplift and truncation of eastern Oman may have caused local remobilisation, updip migration, and loss to the surface of oil in reservoirs, initially generated from the prolific Al Huqf source rocks of Late Precambrian-Early Cambrian age.

THE INTRA-LATROBE PLAY : A CASE HISTORY FROM THE BASKER/MANTA BLOCK (VIC/P19), GIPPSLAND BASIN

1988 ◽  
Vol 28 (1) ◽  
pp. 100
Author(s):  
A.B.S. Clark ◽  
B.M. Thomas
Keyword(s):  
Large Scale ◽  
Fault Plane ◽  
Sedimentary Facies ◽  
Source Rocks ◽  
Economic Viability ◽  
Burial Depth ◽  
The North ◽  
North Eastern ◽  
Limiting Parameters ◽  
Gippsland Basin

In 1981 Shell and its co-venturers were the successful applicants for gazettal block V80-3, now permit VIC/P19, on the north-eastern margin of the Gippsland Basin where, subsequently, 10 exploration wells were drilled. At the time of the award, the offshore Gippsland Basin had been explored for some 20 years, and the conventional 'Top Latrobe' play even then was considered to be largely exhausted although a few small traps of doubtful economic viability remained untested. Thus, from the outset, exploration in VIC/P19 also emphasised the intra-Latrobe play. While the existence of the intra-Latrobe play has long been recognised, its extent and limiting parameters are less well documented.Recent exploration results in the southern part of VIC/P19 indicate that the main phase (peak) of generation and expulsion of hydrocarbons from intra- Latrobe source rocks occurs at depths of 4 to 5 km for oil and 5 to 6 km for gas. Large-scale vertical migration of hydrocarbons (up to 2 km or more) is probably occurring in many parts of the central Gippsland Basin and has charged faulted intra- Latrobe traps, such as found at Basker-1 and Manta-1. These accumulations are characterised by multiple stacked reservoirs (fluvial and alluvial sandstones) and thin hydrocarbon columns. However, similar adjacent traps are dry, despite the presence of equivalent reservoirs (e.g. Basker South-I and Chimaera-I), probably due to inadequate lateral fault seals. Lateral sealing may occur along the fault plane itself or by favourable juxtaposition of lithologies, both cases being demonstrated in the Manta accumulation. The petrology and reservoir characteristics of Latrobe Group sandstones vary considerably, depending largely on sedimentary facies. Sands of fluvial or alluvial origin are generally inferior to those deposited in shoreline environments. An effective intra-Latrobe reservoir 'floor' lies at around 4 km burial depth for both fluvial and alluvial sandstones.

The northwest Australian continental margin

1982 ◽  
Vol 305 (1489) ◽  
pp. 45-62 ◽  
Keyword(s):  
Early Cretaceous ◽  
Continental Margin ◽  
Middle Jurassic ◽  
Large Scale ◽  
Geothermal Gradient ◽  
Source Rocks ◽  
High Rate ◽  
Hydrocarbon Generation ◽  
Carbonate Sedimentation ◽  
Break Up

The Northwest Shelf of Australia offers a typical example of a ‘passive’ continental margin. Major intra-cratonic basins of Permian to Middle Jurassic age developed along the present coastline, superimposed to either orthogonally trending Palaeozoic basins or Precambrian basement rocks. In each of these depocentres distinct lithotectonic units can be recognized that are related to phases of rifting and subsequent continental break-up. The pre-break-up rift valley and intra-cratonic basin stages are represented by a very thick Permian to Middle Jurassic series of mainly fluvio-deltaic sediments but with occasional marine incursions. Break-up took place near the end of the Middle Jurassic and was accompanied by large-scale block faultings with associated uplift and sub-areal erosion. Gradually late Jurassic to early Cretaceous marine sediments transgressed over the eroded surface: within the general transgressive episode, late Callovian, late Oxfordian to Kimmeridgian, late Tithonian to early Cretaceous marine incursions may be singled out. Open marine conditions, related to the breakup of Gondwanaland and opening of the Indian Ocean, became widespread during the Albian in the southern part of the Australian Northwest Shelf and during the Cenomanian in the northern part. The deposition of a thick prograding wedge of mainly carbonate sedimentation since the mid-Eocene resulted in a northwesterly regional tilt of the Shelf. Hydrocarbon occurrences are related to the tectonic evolution. Early Triassic, early Middle Jurassic, late Oxfordian-Kimmeridgian and early Cretaceous marine incursions are directly related to the deposition of potential source rocks in restricted basins. A regressive phase led to the deposition of Triassic fluviatile sediments with excellent reservoir potential. Break-up tectonism and subsequent marine transgression provided the relevant trapping mechanism and probably the migration paths for the major gas-condensate discoveries of the Rankin Platform. The prolonged high rate of subsidence and accompanying thick sedimentation have ensured that hydrocarbon generation occurred, despite the low geothermal gradient.

Sequence stratigraphy of source and reservoir rocks in the Upper Permian and Jurassic of Jameson Land, East Greenland

1998 ◽  
pp. 43-54 ◽  
Author(s):  
Lars Stemmerik ◽  
Gregers Dam ◽  
Nanna Noe-Nygaard ◽  
Stefan Piasecki ◽  
Finn Surlyk
Keyword(s):  
Sequence Stratigraphy ◽  
Middle Jurassic ◽  
Sedimentary Basins ◽  
Upper Jurassic ◽  
Oil Field ◽  
Source Rocks ◽  
Upper Permian ◽  
Shallow Marine ◽  
East Greenland ◽  
Reservoir Rocks

NOTE: This article was published in a former series of GEUS Bulletin. Please use the original series name when citing this article, for example: Stemmerik, L., Dam, G., Noe-Nygaard, N., Piasecki, S., & Surlyk, F. (1998). Sequence stratigraphy of source and reservoir rocks in the Upper Permian and Jurassic of Jameson Land, East Greenland. Geology of Greenland Survey Bulletin, 180, 43-54. https://doi.org/10.34194/ggub.v180.5085 _______________ Approximately half of the hydrocarbons discovered in the North Atlantic petroleum provinces are found in sandstones of latest Triassic – Jurassic age with the Middle Jurassic Brent Group, and its correlatives, being the economically most important reservoir unit accounting for approximately 25% of the reserves. Hydrocarbons in these reservoirs are generated mainly from the Upper Jurassic Kimmeridge Clay and its correlatives with additional contributions from Middle Jurassic coal, Lower Jurassic marine shales and Devonian lacustrine shales. Equivalents to these deeply buried rocks crop out in the well-exposed sedimentary basins of East Greenland where more detailed studies are possible and these basins are frequently used for analogue studies (Fig. 1). Investigations in East Greenland have documented four major organic-rich shale units which are potential source rocks for hydrocarbons. They include marine shales of the Upper Permian Ravnefjeld Formation (Fig. 2), the Middle Jurassic Sortehat Formation and the Upper Jurassic Hareelv Formation (Fig. 4) and lacustrine shales of the uppermost Triassic – lowermost Jurassic Kap Stewart Group (Fig. 3; Surlyk et al. 1986b; Dam & Christiansen 1990; Christiansen et al. 1992, 1993; Dam et al. 1995; Krabbe 1996). Potential reservoir units include Upper Permian shallow marine platform and build-up carbonates of the Wegener Halvø Formation, lacustrine sandstones of the Rhaetian–Sinemurian Kap Stewart Group and marine sandstones of the Pliensbachian–Aalenian Neill Klinter Group, the Upper Bajocian – Callovian Pelion Formation and Upper Oxfordian – Kimmeridgian Hareelv Formation (Figs 2–4; Christiansen et al. 1992). The Jurassic sandstones of Jameson Land are well known as excellent analogues for hydrocarbon reservoirs in the northern North Sea and offshore mid-Norway. The best documented examples are the turbidite sands of the Hareelv Formation as an analogue for the Magnus oil field and the many Paleogene oil and gas fields, the shallow marine Pelion Formation as an analogue for the Brent Group in the Viking Graben and correlative Garn Group of the Norwegian Shelf, the Neill Klinter Group as an analogue for the Tilje, Ror, Ile and Not Formations and the Kap Stewart Group for the Åre Formation (Surlyk 1987, 1991; Dam & Surlyk 1995; Dam et al. 1995; Surlyk & Noe-Nygaard 1995; Engkilde & Surlyk in press). The presence of pre-Late Jurassic source rocks in Jameson Land suggests the presence of correlative source rocks offshore mid-Norway where the Upper Jurassic source rocks are not sufficiently deeply buried to generate hydrocarbons. The Upper Permian Ravnefjeld Formation in particular provides a useful source rock analogue both there and in more distant areas such as the Barents Sea. The present paper is a summary of a research project supported by the Danish Ministry of Environment and Energy (Piasecki et al. 1994). The aim of the project is to improve our understanding of the distribution of source and reservoir rocks by the application of sequence stratigraphy to the basin analysis. We have focused on the Upper Permian and uppermost Triassic– Jurassic successions where the presence of source and reservoir rocks are well documented from previous studies. Field work during the summer of 1993 included biostratigraphic, sedimentological and sequence stratigraphic studies of selected time slices and was supplemented by drilling of 11 shallow cores (Piasecki et al. 1994). The results so far arising from this work are collected in Piasecki et al. (1997), and the present summary highlights the petroleum-related implications.

New insights into the Hercynian Orogeny, and their implications for the Paleozoic Hydrocarbon System in the Arabian Plate

GeoArabia ◽  
2009 ◽  
Vol 14 (3) ◽  
pp. 199-228 ◽  
Author(s):  
Mohammad Faqira ◽  
Martin Rademakers ◽  
AbdulKader M. Afifi
Keyword(s):  
Oil And Gas ◽  
Seismic Imaging ◽  
Structural Features ◽  
Source Rocks ◽  
Arabian Plate ◽  
Arabian Shield ◽  
Tectonic Event ◽  
Angular Unconformity ◽  
The North ◽  
Hercynian Orogeny

ABSTRACT During the past decade, considerable improvements in the seismic imaging of the deeper Paleozoic section, along with data from new well penetrations, have significantly improved our understanding of the mid-Carboniferous deformational event. Because it occurred at the same time as the Hercynian Orogeny in Europe, North Africa and North America it has been commonly referred to by the same name in the Middle East. This was the main tectonic event during the late Paleozoic, which initiated or reactivated many of the N-trending block uplifts that underlie the major hydrocarbon accumulations in eastern Arabia. The nature of the Hercynian deformation away from these structural features was poorly understood due to inadequate seismic imaging and insufficient well control, along with the tectonic overprint of subsequent deformation events. Three Hercynian NE-trending arches are recognized in the Arabian Plate (1) the Levant Arch, which extended from Egypt to Turkey along the coast of the Mediterranean Sea, (2) the Al-Batin Arch, which extended from the Arabian Shield through Kuwait to Iran, and (3) the Oman-Hadhramaut Arch, which extended along the southeast coast of Oman and Yemen. These arches were initiated during the mid-Carboniferous Hercynian Orogeny, and persisted until they were covered unconformably by the Khuff Formation during the Late Permian. Two Hercynian basins separate these arches: the Nafud-Ma’aniya Basin in the north and Faydah-Jafurah Basin in the south. The pre-Hercynian Paleozoic section was extensively eroded over the arches, resulting in a major angular unconformity, but generally preserved within the basins. Our interpretation suggests that most of the Arabian Shield, except the western highlands along the Red Sea, is the exhumed part of the Al-Batin Arch. The Hercynian structural fabric of regional arches and basins continue in northern Africa, and in general appear to be oriented orthogonal to the old margin of the Gondwana continent. The Hercynian structure of arches and basins was partly obliterated by subsequent Mesozoic and Cenozoic tectonic events. In eastern Saudi Arabia, Qatar, and Kuwait, regional extension during the Triassic formed N-trending horsts and graben that cut across the NE-trending Hercynian mega-structures, which locally inverted them. Subsequent reactivation during the Cretaceous and Neogene resulted in additional growth of the N-trending structures. The Hercynian Arches had major impact on the Paleozoic hydrocarbon accumulations. The Silurian source rocks are generally preserved in the basins and eroded over the arches, which generally confined Silurian-sourced hydrocarbons either within the basins or along their flanks. Furthermore, the relict Hercynian paleo-topography generally confined the post-Hercynian continental clastics of the Unayzah Formation and equivalents to the Hercynian basins. These clastics contain the main Paleozoic oil and gas reservoirs, particularly along the basin margins where they overlie the sub-crop of the Silurian section with angular unconformity, thus juxtaposing reservoir and source rock.

scholarly journals The Cogollo Group and the oceanic anoxic events 1a and 1b, Maracaibo basin, Venezuela

2015 ◽  
Vol 45 (suppl 1) ◽  
pp. 41-61 ◽  
Author(s):  
José Alejandro Méndez Dot ◽  
José Méndez Baamonde ◽  
Dayana Reyes ◽  
Rommel Whilchy
Keyword(s):  
Source Rock ◽  
Organic Geochemistry ◽  
Sedimentary Facies ◽  
Source Rocks ◽  
Maracaibo Basin ◽  
Pelagic Environment ◽  
Anoxic Events ◽  
Anoxic Environment ◽  
Platform System ◽  
La Luna

ABSTRACTCarbonates of Cogollo Group (Apón, Lisure and Maraca formations) constitute the broader calcareous platform system originated during Aptian and Albian of Cretaceous in north-western South America, Maracaibo Basin, Venezuela. On the shallow shelf, a variety of calcareous sedimentary facies were deposited during marine transgressive and regressive cycles. Some of them developed porosity and constitute important hydrocarbon reservoirs. Due to some major marine transgressions, from early Aptian, the anoxic environment and characteristic facies of a pelagic environment moved from the outer slope and basin to the shallow shelf, during specific time intervals, favouring the sedimentation of organic matter-rich facies, which correspond to the oceanic anoxic events (OAEs) 1a and 1b. The source rock of Machiques Member (Apón Formation) was deposited during early Aptian OAE 1a (~ 120 Ma). The source rock of Piché Member, located at the top of the Apón Formation, was deposited during late Aptian OAE 1b (~ 113 Ma). Finally, La Luna Formation, from Cenomanian, that covers the OAE 2 (~ 93 Ma), represents the most important source rock in the Maracaibo Basin. In this way and based on sedimentological and organic geochemistry results from the determinations performed on 247 samples belonging to six cores in the Maracaibo Basin, we propose these two organic-rich levels, deposited on the shallow shelf of the Cogollo Group, as "effective source rocks", additional to La Luna Formation, with oil migration in relatively small distances to the porosity facies.

scholarly journals Feldspar Dissolution and Its Influence on Reservoirs: A Case Study of the Lower Triassic Baikouquan Formation in the Northwest Margin of the Junggar Basin, China

Geofluids ◽  
2018 ◽  
Vol 2018 ◽  
pp. 1-19 ◽  
Author(s):  
Meng Xiao ◽  
Xuanjun Yuan ◽  
Dawei Cheng ◽  
Songtao Wu ◽  
Zhenglin Cao ◽  
...  
Keyword(s):  
Clay Minerals ◽  
Physical Property ◽  
Junggar Basin ◽  
Sedimentary Facies ◽  
Lower Triassic ◽  
Depositional Environments ◽  
Source Rocks ◽  
Reservoir Quality ◽  
Delta Plain ◽  
Feldspar Dissolution

Feldspar dissolution is a common feature in clastic rock reservoirs of petroliferous basins and has an important influence on reservoir quality. However, the effect of feldspar dissolution on reservoir quality varies under different depositional environments and diagenetic systems. The study area in this paper is located in the Baikouquan Formation in the northwestern margin of the Junggar Basin, which is significantly influenced by feldspar dissolution. Based on the analyses of core and thin section observations, QEMSEM, XRD, SEM, CL, fluorescence, and image analysis software combined with logging and physical property data, this study shows that feldspar dissolution in the subaqueous distributary channel of a fan delta plain, which has good original physical properties and low mud contents, significantly improves the properties of the reservoir. The main reasons for this are as follows: (1) the sedimentary facies with good original properties and low mud content is a relatively open system in the burial stage. The acidic fluids needed for feldspar dissolution are mostly derived from organic acids associated with the source rocks and migrate to the good-permeability area of the reservoir; (2) the by-products of feldspar dissolution, such as authigenic clay minerals and authigenic quartz, are transported by pore water in a relatively open diagenetic system and then precipitated in a relatively closed diagenetic system; and (3) the clay minerals produced by feldspar dissolution in different diagenetic environments and diagenetic stages have different effects on the reservoir. When the kaolinite content is less than 3%, the illite content is less than 4%, and the chlorite content is less than 12%, the clay minerals have a positive effect on the porosity. These clay minerals can reduce porosity and block pore throats when their contents are larger than these values.

Stratigraphy and Sedimentology of Middle Jurassic Sequence of Chorar Island, Patan District, Kachchh Basin, Gujarat

2018 ◽  
Vol 92 (4) ◽  
pp. 419-426
Author(s):  
Satish J. Patel ◽  
Jehova L. Darngawn ◽  
Jaquilin K. Joseph ◽  
Apurva D. Shitole
Keyword(s):  
Middle Jurassic ◽  
Kachchh Basin ◽  
Jurassic Sequence
Sign in / Sign up

Export Citation Format

Share Document