Observations geologiques en Sierra de Lujar (cordilleres Betiques internes, Espagne)

1966 ◽  
Vol S7-VIII (4) ◽  
pp. 585-591
Author(s):  
Jean Boulin ◽  
Patrick Dimpault Darcy ◽  
Henry Leroy

Abstract The Sierra de Lujar is composed of Triassic sedimentary rocks, mostly limestones and dolomites, in a reversed series. This unit seems to be the inverted flank of a recumbent fold of which the Lanjaron nappe is the normal flank, the fold being inclined toward the inner zones of the range. A lead deposit is associated with the carbonate rocks. It is of the stratiform type and appears to be related to a shoal zone that existed during the sedimentation of the ore host rock, and perhaps also to reworking and concentration of the latter, in which case it would be synsedimentary. These Triassic shoals, which have probably shifted somewhat, lie parallel to the northeast-southwest direction of the minor alpine (Cenozoic) folds that make up the Sierra. These minor folds are themselves parallel to the general alignment of the range.

Author(s):  
L. V. Kuleshevich ◽  
М. М. Filippov ◽  
N. А. Goltsin ◽  
R. Sh. Krymsky ◽  
K. I. Lokhov

The Maksovo metasapropelite deposit, which contains shungite matter and is called maksovite, is located in the eastern Onega structure. The deposit is a diapiric fold which formed ca. 2070±10 Ma ago. It is underlain by carbonate rocks and overlain by tuff siltstones and is cross-cut by 1956±5 Ma gabbro-dolerites. Unaltered maksovites are pelitomorphic rocks with a massive to mildly layered texture and moderate concentrations of all petrogenic components and Сorg of about 30%. Fe-Mg rich and alkaline metasomatic rocks evolve after maksovites and mafic and carbonate tuff siltstones in the northwestern part of the deposit within a multiple ridge-like fold after brecciation zones. They differ from unaltered sedimentary rocks in heterogeneous (brecciated, streaky) textures, mineral and chemical composition and are saturated with numerous sulphide, carbonate, quartz and albite veinlets. They are identified by intense biotitization, chloritization and the presence of calcite, microcline metacrystals, albite-carbonate metacrystals with apatite and carbonate-quartz metacrystals with sulphides and rutile, veinlets and disseminated mineralization. Na concentration rises to 5.67% and K concentration to 7.57%. P and Ti concentrations, accompanying alkaline metasomatism, as well as Mg-Fe and ore-bearing components (often incompatible), increase locally. Metasomatic rocks evolve heterogeneously and are represented by breccia zones. Their slightly elevated radioactivity disturbs the qualitative characteristics of primary maksovite as a useful mineral. Maksovites were dated at 1558±61 Ma by the Re-Os method from sulphides.


1987 ◽  
Vol 51 (360) ◽  
pp. 271-280 ◽  
Author(s):  
D. Read ◽  
D. C. Cooper ◽  
J. M. McArthur

AbstractMillimetric, ellipsoidal monazite nodules found within Lower Palaeozoic sedimentary rocks in Wales, south-west England and Brittany are characterised by a pronounced zonation of light and heavy REE, an inclusion fabric of low-grade metamorphic minerals indistinguishable from the host rock and a low Th content. They are interpreted as the product of in situ recrystallization of detrital monazites derived from pegmatitic or granitic source rocks and are potentially useful as indicators of Lower Palaeozoic sedimentary rock provenance.


2021 ◽  
Vol 91 (2) ◽  
pp. 186-196
Author(s):  
Amlan Banerjee ◽  
Sarbani Patranabis-Deb ◽  
Dilip Saha ◽  
M. Santosh

ABSTRACT Mechanisms of inorganic silicification of early Precambrian (older than 750 Ma) carbonate rocks remain equivocal. A quantitative model is presented here that captures the essence of ancient inorganic silicification of the carbonate rocks and is based on the hypotheses that carbonate silicification, a volume-conservative replacive process, is driven by crystallization stress induced by the growth of the guest mineral. Results of the quantitative model for silicification of calcitic limestone and dolostone are compared and validated against available independent observations and are found to be geologically reasonable. The quantitative model suggests that silicification of carbonate rocks is dependent on the host-rock composition and that calcitic limestones will be readily silicified compared to dolostone and/or aragonitic limestone. Results also show that silicification rate of carbonate rocks—irrespective of their composition—increases with increase in silica supersaturation and reactive surface area. Porosity and permeability of the host rock also increases the silicification rate of the carbonate rocks. Results also predict that substantial volume of silica-saturated fluids is required for inorganic silicification of a one-meter cube of carbonate rock. The quantitative model presented here has its limitations and should not be viewed as a unique and truly realistic representation of the carbonate silicification mechanism. The quantitative model presented here is unable to explain the formation of porosity and subsequent volume reduction of the parent material during the replacement process as observed in replacement experiments. Also, the effect of pH on silicification of carbonate rocks cannot be quantitatively estimated in this study. The quantitative model presented here should be viewed as one of the possible mechanisms of carbonate silicification that has to be tested further with experimental data and by model refinement.


2021 ◽  
Vol 21 (1) ◽  
pp. 599-607
Author(s):  
Qiyan Li ◽  
Songtao Wu ◽  
Xiufen Zhai ◽  
Songqi Pan ◽  
Senhu Lin

A nanoscale pore throat system develops extensively in rocks of unconventional reservoirs serving as both source and reservoir rock. The nanoscale pores provide the main storage spaces, accounting for 70% to 80% of the total unconventional tight reservoirs in China. As one of most important unconventional petroleum accumulations, tight oil has accumulated in more than 20 lacustrine strata since the Permian in China. Three types of tight oil reservoirs were identified based on the lithology and provenance in the lacustrine basins, including terrigenous sandstone, endogenous carbonate rocks and mixed sedimentary rocks. The micro/nanopore structures of these tight rocks were investigated with the application of optical microscopy, scanning electron microscopy (SEM), mercury injection capillary pressure (MICP), gas adsorption (GA) and nuclear magnetic resonance (NMR). The results indicated that the pore systems were connected by nanoscale throats dominated the storage spaces of the lacustrine tight oil reservoirs, while there were obvious differences among these three tight rocks, including pore types, pore size and movable fluid distribution. (i) The terrigenous sandstones, which were represented by the Triassic Chang 7 tight sandstones in the Ordos Basin and Cretaceous Quantou tight sandstones in the Songliao Basin, were mainly arkoses, and their storage space was mainly composed of dissolution pores and intraclay mineral pores. Feldspar, rock fragments and carbonate cements were the majority of the dissolved components, and the diameter of dissolution pores ranged from 1 micron to 50 microns. Abundant intrakaolinite and illite/smectite mixed layers pores were developed, and the pore size was 10 nm to 500 nm. The MICP and GA data suggested that storage spaces were connected by throats with diameters of 10 nm˜300 nm. (ii) The endogenous carbonate rocks, which were represented by the Jurassic Da’anzhai limestones in the Sichuan Basin, were the tightest rocks with porosities of less than 5% and permeabilities of less than 0.01×10−3 μm2. The calcite dissolution pores and fractures with diameters of 10 nm˜500 nm were the most important storage spaces. The majority of pore systems were connected by throats with diameters of 6 nm˜100 nm based on the MICP and GA data. (iii) The tight mixed sedimentary rocks, which were represented by the Permian Lucaogou Formation in the Junggar Basin, were complex in lithologic composition, and dolostones and dolomite sandstones were the most important exploration targets. The interdolomite pores were the dominant storage spaces, in which abundant illite/smectite mixed layers were filled, and the pore size ranged from 50 nm to 50 microns. The MICP and GA data showed that the storage space was dominated by throats with diameters of 10 nm˜200 nm, and their volumetric contributions could reach over 70%. These results could provide a reference for future tight oil research and exploration in China.


2018 ◽  
Vol 25 (1-2) ◽  
Author(s):  
Jiří Zimák

This paper deals with natural radioactivity of Palaeozoic sedimentary rocks in the map sheets 25-11 Hlubočky and 25-12 Hranice. All studied rocks belong to the Moravo-Silesian Palaeozoic, namely to three flysch formations (Horní Benešov, Moravice and Hradec-Kyjovice fms.) and two carbonate formations (Macocha and Líšeň fms.). Contents of potassium, uranium and thorium were measured using a laboratory gamma–ray spectrometer in 1 337 rock samples, values of mass activity of 226Ra equivalent (am) were calculated. The data are tabled and discussed. The average am of analysed flysch sediments is 160 Bq.kg-1. This value is very close to the value of am calculated for the average continental crust. Natural radioactivity of flysch sedimentary rocks grows from psefites (conglomerates) through psammites (graywackes dominate) to the group of aleurites and pelites (siltstones, silty shales, clay shales). Natural radioactivity of the studied carbonate rocks is very low. In dark biodetritic limestones of the Líšeň Fm. there were found slightly increased uranium contents (typically up to 6 ppm). Uranium in the rock is probably bound to graphitic matter.


Author(s):  
S. W. Wise ◽  
F. M. Weaver ◽  
N. Guven

Although silica is a primary component of flints, cherts, volcanic glasses, and siliceous deep sea oozes, mobilization pathways and modes of reprecipitation of this element during early diagenesis of volcanic and sedimentary rocks remains an elusive geologic problem. As a result, the source and mode of deposition of vast Tertiary silica deposits of the Atlantic and Gulf Coastal Plain and offshore deep sea deposits is currently a topic of sharp debate. Both volcanic and biogenous sources of silica have been variously postulated as ultimate or immediate silica sources for a broad range of fine-grained silica-rich rocks including claystones, “opal claystones,” “buhrstones,” “pseudobuhrstones,” cristobalitic cherts, and silicified chalks and limestones. Current scanning electron microscope/electron microprobe investigations of incipient stages of diagenesis in geologically young biogenous sediments, volcanic glasses, and silica-replaced carbonate rocks, however, do allow silica pathways to be traced and silica sources to be ascertained.


2015 ◽  
Vol 7 (1) ◽  
Author(s):  
Murat Gül

AbstractThe Lycian Nappes, containing ophiolite and sedimentary rocks sequences, crop out in the southwest Turkey. The Tavas Nappe is a part of the Lycian Nappes. It includes the Lower Jurassic-Upper Cretaceous calciturbidites. Chert occurrences were observed in the lower part of this calciturbidite. These cherts can be classified on the basis of length, internal structure and host rock. Chert bands are 3.20-35.0min length and 7.0-35.0 cm thick. Chert lenses are 5.0-175.0 cm in length and 1.0-33.0 cm thick. According to its internal structure, granular chert (bladedlarge equitant quartz minerals replaced the big calcite mineral of fossil shell) and porcelanious chert (microcrystalline silica replaced micrite) have been separated. Cherts are generally associated with calcarenite-calcirudite, the others with calcilutite. Micritic calcite patches of cherts point out an uncompleted silicification. The source of silica was dominantly quartz-rich, older, basal rocks and to a lesser extent radiolarians. The coarse-grained calciturbidites act as a way for silica transportation. Some calcite veins (formed during transportation and emplacement of nappes) cut both calciturbidites and cherts. Thus, chert occurrences evolved before emplacement of nappes (the latest Cretaceous-Late Miocene period) during the epigenetic phase.


2021 ◽  
pp. 82-91
Author(s):  
Petr Ignatov ◽  
Nail Zaripov ◽  
Konstantin Novikov ◽  
Alexander Tolstov

Drag folds were revealed in Lower Paleozoic sedimentary strata of Mirny, Nakyn and Syuldyukar diamondiferous fields, West Yakutia. They consist of minor anticlinal forms (3-5 to 15-20 cm thick) and cut marl, clayey limestone and dolomite bands located between monolith seams of carbonate rocks. Some folds as monocline, flexures and S- or Z-shaped folds reflect the degree of shearrelated interlayer offset. Drag folds are among shear zone occurrences including microfaults, slickensides with slip groove horizontal planes, and schistosity zones. Drag folds reflect local extension points while schistosity zones indicate compression points. For Syuldyukar field, detailed mapping results for drag folds and schistosity zones are provided at 3 scales: across 20 × 20 m observation grid within a local 2 km2 site; across 200 × 200 m grid within 20 km2 area; across 500 × 500 m grid within ~100 km2 territory. For all scales, drag fold halos are restricted to schistosity zones. Within a local site adjacent to kimberlites, drag folds mark ore-hosting fault controlling long axes of kimberlite areal projections. Within large areas, drag fold halos are 1,2-2 km, which compares with kimberlite group areal parameters. Drag fold halos reflect shear junctions, with some of them hosting kimberlites. Local occurrences of drag folds mark a major shear hosting a kimberlite body. Drag fold analysis combined with other evidence should be used as an indirect prospecting indicator of concealed shears and local extension areas controlling kimberlites.


Sign in / Sign up

Export Citation Format

Share Document