Exploring the Japan Cave in Taman Hutan Raya Djuanda, Bandung Using GPR

2018 ◽  
Vol 23 (3) ◽  
pp. 377-381
Author(s):  
Widodo Widodo ◽  
Azizatun Azimmah ◽  
Djoko Santoso

Investigating underground cavities is vital due to their potential for subsidence and total collapse. One of the proven geophysical methods for locating underground cavities at a shallow depth is ground penetrating radar (GPR). GPR uses contrasting dielectric permittivity, resistivity, and magnetic permeability to map the subsurface. The aim of this research is to prove that GPR can be applied to detect underground cavities in the Japan Cave of Taman Hutan Raya Djuanda, in Bandung, Indonesia. Forward modeling was performed first using three representative synthetic models before field data were acquired. The data acquisition was then conducted using a 100 MHz GPR shielded antenna with three lines of 80 m and one additional line 10 m long. The result showed a region of different reflection amplitude, which was proven to be the air-filled cavities.

2012 ◽  
Vol 6 (6) ◽  
pp. 1435-1443 ◽  
Author(s):  
A. Gusmeroli ◽  
G. Grosse

Abstract. Lakes are abundant throughout the pan-Arctic region. For many of these lakes ice cover lasts for up to two thirds of the year. The frozen cover allows human access to these lakes, which are therefore used for many subsistence and recreational activities, including water harvesting, fishing, and skiing. Safe traveling condition onto lakes may be compromised, however, when, after significant snowfall, the weight of the snow acts on the ice and causes liquid water to spill through weak spots and overflow at the snow-ice interface. Since visual detection of subsnow slush is almost impossible our understanding on overflow processes is still very limited and geophysical methods that allow water and slush detection are desirable. In this study we demonstrate that a commercially available, lightweight 1 GHz, ground penetrating radar system can detect and map extent and intensity of overflow. The strength of radar reflections from wet snow-ice interfaces are at least twice as much in strength than returns from dry snow-ice interface. The presence of overflow also affects the quality of radar returns from the base of the lake ice. During dry conditions we were able to profile ice thickness of up to 1 m, conversely, we did not retrieve any ice-water returns in areas affected by overflow.


Author(s):  
Horst G. Brandes

The effectiveness of electromagnetic (EM), ground penetrating radar (GPR) and seismic refraction (SR) were evaluated by surveying a shallow trench in which a number of objects of varying composition and size were buried. The trench was excavated in granular calcareous fill material. An experienced geophysical contractor was asked to provide blind predictions of object locations using each of the techniques in turn. GPR with a 400 MHz antenna was the most successful, followed by SR and EM surveying. GPR and SR were also carried out at the port of Hilo to investigate complex subsurface conditions.


2020 ◽  
Vol 53 (4) ◽  
pp. 620-644 ◽  
Author(s):  
Zoe Elizabeth Jeffery ◽  
Stephen Penn ◽  
David Peter Giles ◽  
Linley Hastewell

The chalk bedrock of the Hampshire Basin, southern England is an important aquifer and is highly susceptible to dissolution, making the development and presence of karstic features a widespread occurrence. These features are hazardous because they provide possible pathways to the underlying aquifer and therefore present potential site-specific contamination risks. There is also evidence of extensive extraction, through both mining and surface quarrying, of chalk, flint and clay over many centuries. Geophysical techniques consisting of electromagnetic (EM31) and ground-penetrating radar surveys were used to identify and characterize target features identified from desk study data. The ground-penetrating radar and EM31 interpretations allowed the classification of non-anthropogenic target features, such as diffuse buried sinkholes with disturbed and subsiding clay-rich infill and varying symmetrical and asymmetrical morphologies. We describe here the investigations of such features identified at Holme Farm, Stansted House, Hampshire. The combination of EM31 data and ground-penetrating radar profiles facilitated the identification of a palaeovalley, cavities and irregular rockhead. This investigation identified locations of aquifer contamination risk as some sinkholes have been sites for the illegal dumping of waste or the infiltration of fertilizers, leaking sewage pipes or animal waste. This potential source of contamination utilizes the sinkhole as a pathway into the highly transmissive White Chalk Subgroup of Hampshire and has caused contamination of the aquifer. We conclude that our integrated approach of geophysical techniques linked to aerial photographs and LiDAR image interpretation was highly effective in the location and characterization of dissolution structures, infilled former quarries and mining features at this site.


2016 ◽  
Vol 46 (1) ◽  
pp. 15-27 ◽  
Author(s):  
Larissa Natsumi Tamura ◽  
Renato Paes de Almeida ◽  
Fabio Taioli ◽  
André Marconato ◽  
Liliane Janikian

ABSTRACT: One key factor for the advance in the study of fluvial deposits is the application of geophysical methods, being the Ground Penetrating Radar one of special value. Although applied to active rivers, the method is not extensively tested on the rock record, bearing interest for hydrocarbon reservoir analogue models. The São Sebastião and Marizal formations were the subject of previous studies, which made possible the comparison of Ground Penetrating Radar survey to previous stratigraphic studies in order to identify the best combination of resolution, penetration and antenna frequency for the studied subject. Eight radar facies were identified, being six of them related to fluvial sedimentary environments, one related to eolian sedimentary environment and one radar facies interpreted as coastal sedimentary environment. The Ground Penetrating Radar data showed compatibility to sedimentary structures in the outcrops, like planar and trough cross-stratified beds. It is noted that the obtained resolution was efficient in the identification of structures up to 0.3 m using a 100 MHz antenna. In this way, the Ground Penetrating Radar survey in outcrops bears great potential for further works on fluvial depositional architecture.


Geophysics ◽  
2019 ◽  
Vol 84 (3) ◽  
pp. H1-H12 ◽  
Author(s):  
Hemin Yuan ◽  
Mahboubeh Montazeri ◽  
Majken C. Looms ◽  
Lars Nielsen

Diffractions caused by, e.g., faults, fractures, and small-scale heterogeneity localized near the surface are often used in ground-penetrating radar (GPR) reflection studies to constrain the subsurface velocity distribution using simple hyperbola fitting. Interference with reflected energy makes the identification of diffractions difficult. We have tailored and applied a diffraction imaging method to improve imaging for surface reflection GPR data. Based on a plane-wave destruction algorithm, the method can separate reflections from diffractions. Thereby, a better identification of diffractions facilitates an improved determination of GPR wave velocities and an optimized migration result. We determined the potential of this approach using synthetic and field data, and, for the field study, we also compare the estimated velocity structure with crosshole GPR results. For the field data example, we find that the velocity structure estimated using the diffraction-based process correlates well with results from crosshole GPR velocity estimation. Such improved velocity estimation may have important implications for using surface reflection GPR to map, e.g., porosity for fully saturated media or soil moisture changes in partially saturated media because these physical properties depend on the dielectric permittivity and thereby also the GPR wave velocity.


2011 ◽  
Vol 374-377 ◽  
pp. 2256-2260
Author(s):  
Sun Yong

In the process of engineering prospective design and constructing, it is necessary to avoid the adverse impact of geological phenomena, such as fault, karst and landslide. Therefore, it’s important to choose a favorable project address by scientific and effective detection with engineering geological conditions. The main exploration method for geological conditions is the geophysical exploration, including: high density electrical method, ground penetrating Radar, seismic exploration method and so on. The discrimination result with a single geological method changes much, and it is difficult to make an accurate analysis of the geological conditions. So we should composite a variety of exploration methods. In this paper, it expounds the fundamental, the working method, data explanations of the high density electrical method and ground penetrating Radar firstly. And then it takes exploration of candidate sites of an aluminum waste disposal plant for example, the geological conditions of candidate sites are analyzed under the two geophysical methods. The study results of engineering site option have a positive role in guiding the work.


Sign in / Sign up

Export Citation Format

Share Document