Developing New Generation of Environmentally Friendly Nano Based Low Saline Water-Based Drilling Fluid

2021 ◽  
Author(s):  
Mojtaba Kalhor Mohammadi ◽  
Shervin Taraghikhah ◽  
Mohammad Saeed Karimi Rad ◽  
Koroush Tahmasbi Nowtaraki
Keyword(s):  
Potassium Chloride ◽  
Sodium Salt ◽  
Salt Concentration ◽  
Saline Water ◽  
Drilling Fluid ◽  
Fluid Loss ◽  
Water Based ◽  
New Generation ◽  
Chloride Salts ◽  
Sodium And Potassium

Abstract Developing high-performance environmentally friendly drilling fluids is always a requirement by oil and gas operators to reduce the waste management associated cost with the drilling fluid treatment and disposal. Conventional water-based drilling fluid is formulated with the brine-based polymer which consists of sodium and potassium chloride salts to improve the performance of the polymer and also providing clay inhibition in reactive clay and shale. This paper describes the development of nanotechnology-based drilling fluid to replace salt from the conventional application. Nano Based Low Saline Water Based Mud (NBLS-WBM) was formulated and developed based on laboratory experiments. Different nano additives with different concentrations were evaluated and the optimum concentration was selected to reduce the sodium and potassium chloride salts concentration to almost zero. The rheological properties and fluid loss were measured according to the API standard before and after hot rolling. Also, HPHT fluid loss, lubricity, and shale inhibition were evaluated. All the results were compared with sodium salt-saturated and potassium-based polymer muds. Laboratory evaluation of NBLS-WBM indicated that sodium salt concentration can be reduced considerably up to 5% W/V and potassium chloride can be eliminated by adding 1% W/W of nano additive. The rheological properties including plastic viscosity and yield point were constant and stable after hot rolling 16 hours at 250 °F. Also, Clay inhibition improved significantly up to 95% recovery comparing with conventional water-based polymer mud. Although the application of nanotechnology to improve the performance of conventional water-based drilling fluid was studied by many researchers, it is the novelty of this research to reduce the salt concentration and remove it to develop the new generation of salt-free water-based drilling fluid with economical consideration and lower environmental impact.

scholarly journals Experimental study on thermal, rheological and filtration control characteristics of drilling fluids: effect of nanoadditives

2020 ◽  
Vol 75 ◽  
pp. 36
Author(s):  
Erfan Veisi ◽  
Mastaneh Hajipour ◽  
Ebrahim Biniaz Delijani
Keyword(s):  
Thermal Conductivity ◽  
Heat Capacity ◽  
Drilling Fluid ◽  
Formation Damage ◽  
Fluid Loss ◽  
Drilling Fluids ◽  
Drill Bit ◽  
Rheological Characteristics ◽  
Cu Nanoparticles ◽  
Water Based

Cooling the drill bit is one of the major functions of drilling fluids, especially in high temperature deep drilling operations. Designing stable drilling fluids with proper thermal properties is a great challenge. Identifying appropriate additives for the drilling fluid can mitigate drill-bit erosion or deformation caused by induced thermal stress. The unique advantages of nanoparticles may enhance thermal characteristics of drilling fluids. The impacts of nanoparticles on the specific heat capacity, thermal conductivity, rheological, and filtration control characteristics of water‐based drilling fluids were experimentally investigated and compared in this study. Al2O3, CuO, and Cu nanoparticles were used to prepare the water-based drilling nanofluid samples with various concentrations, using the two-step method. Transmission Electron Microscopy (TEM) and X-Ray Diffraction (XRD) were utilized to study the nanoparticle samples. The nanofluids stability and particle size distribution were, furthermore, examined using Dynamic Light Scattering (DLS). The experimental results indicated that thermal and rheological characteristics are enhanced in the presence of nanoparticles. The best enhancement in drilling fluid heat capacity and thermal conductivity was obtained as 15.6% and 12%, respectively by adding 0.9 wt% Cu nanoparticles. Furthermore, significant improvement was observed in the rheological characteristics such as the apparent and plastic viscosities, yield point, and gel strength of the drilling nanofluids compared to the base drilling fluid. Addition of nanoparticles resulted in reduced fluid loss and formation damage. The permeability of filter cakes decreased with increasing the nanoparticles concentration, but no significant effect in filter cake thickness was observed. The results reveal that the application of nanoparticles may reduce drill-bit replacement costs by improving the thermal and drilling fluid rheological characteristics and decrease the formation damage due to mud filtrate invasion.

A New Generation Environment Friendly Water-Based Drilling Fluid and Field Applications

2018 ◽  
Author(s):  
Qi Zhu ◽  
Yong Wang ◽  
Yongqing Zhang ◽  
Zhihe Sun ◽  
Yinghui Wei ◽  
...  
Keyword(s):  
Drilling Fluid ◽  
Environment Friendly ◽  
Water Based ◽  
New Generation

Rheology and fluid loss of a polyacrylamide-based micro-gel particles in a water-based drilling fluid

2020 ◽  
Vol 10 (5) ◽  
pp. 657-662
Author(s):  
Gang Wang ◽  
Honghai Fan ◽  
Guancheng Jiang ◽  
Wanjun Li ◽  
Yu Ye ◽  
...  
Keyword(s):  
Particle Size ◽  
High Temperature ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Drilling Fluid ◽  
Crosslinking Agent ◽  
Fluid Loss ◽  
Temperature Property ◽  
Water Based ◽  
The Cross

In this paper, the cross-linked micro-gel polymer between acrylamide (AM) and N, N-Methylenebisacrylamide (MBA) was synthesized by dispersion polymerization. The initiator and crosslinking agent concentration were used to control the particle size of micro-gel polymer. The filtration property and mechanism of micro-gel were investigated comprehensively. The characteristics of micro-gel were checked by means of Fourier transform infrared spectroscopy, thermogravimetry, transmission electron microscopy, and particle size distribution, respectively. The results indicated that the cross-linked micro-gel polymer exhibited several outstanding merits, such as thermal stability (up to 200 °C), filtration control and rheological property. Microstructure analysis and particle size distribution examinations showed that the scale of micro-gel polymer was micro, which is in accord with design. Rheological tests demonstrated that the nonlinear structure of micro-gel polymer showed less impact on the apparent viscosity. The anti-high temperature property of micro-gel polymer was better than poly anioniccellulose (PAC) and asphalt widely applied in drilling fluid for anti-high temperature fluid-loss additive. As a result, the cross-linked micro-gel polymer had great potential to be applied in high temperature water-based mud.

Proposing a new biodegradable thinner and fluid loss control agent for water-based drilling fluid applications

2020 ◽  
Vol 17 (8) ◽  
pp. 3621-3632 ◽  
Author(s):  
A. T. Al-Hameedi ◽  
H. H. Alkinani ◽  
S. Dunn-Norman ◽  
M. M. Alkhamis ◽  
M. A. Al-Alwani ◽  
...  
Keyword(s):  
Drilling Fluid ◽  
Control Agent ◽  
Fluid Loss ◽  
Water Based ◽  
Loss Control

scholarly journals Laponite: a promising nanomaterial to formulate high-performance water-based drilling fluids

2020 ◽  
Author(s):  
Xian-Bin Huang ◽  
Jin-Sheng Sun ◽  
Yi Huang ◽  
Bang-Chuan Yan ◽  
Xiao-Dong Dong ◽  
...  
Keyword(s):  
High Performance ◽  
Drilling Fluid ◽  
Nitrogen Adsorption ◽  
Drill String ◽  
Wellbore Stability ◽  
Fluid Loss ◽  
Drilling Fluids ◽  
Mechanism Analysis ◽  
Water Based ◽  
Inhibition Performance

Abstract High-performance water-based drilling fluids (HPWBFs) are essential to wellbore stability in shale gas exploration and development. Laponite is a synthetic hectorite clay composed of disk-shaped nanoparticles. This paper analyzed the application potential of laponite in HPWBFs by evaluating its shale inhibition, plugging and lubrication performances. Shale inhibition performance was studied by linear swelling test and shale recovery test. Plugging performance was analyzed by nitrogen adsorption experiment and scanning electron microscope (SEM) observation. Extreme pressure lubricity test was used to evaluate the lubrication property. Experimental results show that laponite has good shale inhibition property, which is better than commonly used shale inhibitors, such as polyamine and KCl. Laponite can effectively plug shale pores. It considerably decreases the surface area and pore volume of shale, and SEM results show that it can reduce the porosity of shale and form a seamless nanofilm. Laponite is beneficial to increase lubricating property of drilling fluid by enhancing the drill pipes/wellbore interface smoothness and isolating the direct contact between wellbore and drill string. Besides, laponite can reduce the fluid loss volume. According to mechanism analysis, the good performance of laponite nanoparticles is mainly attributed to the disk-like nanostructure and the charged surfaces.

Salt-Responsive AM/AMPS/ATC Terpolymers as Modifiers for Rheology and Fluid Loss in Water-Based Drilling Fluid

2018 ◽  
Vol 765 ◽  
pp. 106-112
Author(s):  
Yin Bo He ◽  
Guan Cheng Jiang ◽  
Wu Ge Cui
Keyword(s):  
High Performance ◽  
Drilling Fluid ◽  
Fluid Loss ◽  
Trimethylammonium Chloride ◽  
Polymer Conformation ◽  
Nacl Concentration ◽  
Water Based ◽  
Lower Fluid ◽  
Performance Additives ◽  
Potential Use

In this study, we report salt-responsive amphoteric terpolymers prepared by copolymerization of acrylamide (AM), 2-acrylamido-2-methylpropanesulfonate (AMPS) and 3-acrylamidopropyl trimethylammonium chloride (ATC), and their use as rheology and fluid loss modifiers in water-based drilling fluid (WDF). The dependence of viscosity and turbidity on NaCl concentration indicates the salt-responsiveness of terpolymers, which results from salt-induced polymer conformation changes. In the presence of large quantities of NaCl, comparing with BT/polyanioins solution, bentonite (BT)/terpolymer solution has better shear thinning and thixotropic performance as well as lower fluid loss. Morphology shows that BT/terpolymer solution with NaCl creates high-quality filtrate cake which is compact and thin. A salt-resistant WDF prepared with terpolymers is evaluated and compared with polyanioinc WDF and polyanionic sulfonated WDF. The salt-resistant WDF possesses more favorable rheology, lower fluid loss and stronger tolerance for temperature, suggesting the potential use of AM/AMPS/ATC terpolymers as high-performance additives for salt-resistant WDFs.

scholarly journals Evaluation of environment friendly micro-ionized litchi leaves powder (LLP) as a fluid loss control agent in water-based drilling fluid

2021 ◽  
Vol 11 (4) ◽  
pp. 1715-1726
Author(s):  
Ved Prakash ◽  
Neetu Sharma ◽  
Munmun Bhattacharya ◽  
Ashok Raina ◽  
Man Mohan Gusain ◽  
...  
Keyword(s):  
Hot Rolling ◽  
Drilling Fluid ◽  
Control Agent ◽  
American Petroleum Institute ◽  
Rheological Parameters ◽  
Fluid Loss ◽  
Environment Friendly ◽  
Filtration Loss ◽  
Water Based ◽  
Loss Control

AbstractThis work investigates the efficacy of a biodegradable natural product, litchi leaves powder (LLP) as a filtration loss control agent in the water-based drilling fluid formulations. In order to evaluate the potential of litchi leaves powder (LLP), a strict protocol of experimentations according to API (American Petroleum Institute) standard has been followed. The experimental outcome showed that before hot rolling and after hot rolling of mud samples at 100 °C it was observed that 3–5% Concentration of LLP significantly increased the rheological parameters such as PV, YP and gelation of drilling fluid as compared to reference mud. Also, LLP reformed the filtration loss control characterization, suggesting a better biodegradable fluid loss reducing agent. After hot rolling at 100 °C for 18 h, the water-based drilling fluid with LLP as an additive showed a marked reduction in filtration control property as compared to reference Mud (RM). Experimental results concluded that 5% concentration of LLP significantly reduced the filtration loss of drilling fluid by 70.6% as compared to reference mud under the influence of 100 psi pressure. However, the conventional fluid loss additive CMC (LVG) reduced the filtration loss by maximum 67.5% as compared to reference mud. Therefore, LLP can be used as an alternative to CMC (LVG) in water-based drilling fluid with a maximum subsurface temperature of 100 °C.

Sign in / Sign up

Export Citation Format

Share Document